Merge tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 4.0-rc3.

  Details are in the shortlog, nothing major, mostly IIO fixes for
  reported issues.

  All have been in linux-next successfully"

* tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
  staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel
  staging: comedi: vmk80xx: remove "firmware version" kernel messages
  staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample()
  iio: ak8975: fix AK09911 dependencies
  iio: common: ssp_sensors: Protect PM-only functions to kill warning
  IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc
  Revert "iio:humidity:si7020: fix pointer to i2c client"
  iio: light: gp2ap020a00f: Select REGMAP_I2C
  iio: light: jsa1212: Select REGMAP_I2C
  iio: ad5686: fix optional reference voltage declaration
  iio:adc:mcp3422 Fix incorrect scales table
  iio: mxs-lradc: fix iio channel map regression
  iio: imu: adis16400: Fix sign extension
  staging: iio: ad2s1200: Fix sign extension
  iio: mxs-lradc: only update the buffer when its conversions have finished
  iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions
  iio: mxs-lradc: make ADC reads not disable touchscreen interrupts
  iio: mxs-lradc: separate touchscreen and buffer virtual channels
  iio: imu: inv_mpu6050: Prevent dereferencing NULL
  iio: iadc: wait_for_completion_timeout time in jiffies
  ...

drivers/iio/adc/mcp3422.c

@@ -58,20 +58,11 @@
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	}
 
-/* LSB is in nV to eliminate floating point */
-static const u32 rates_to_lsb[] = {1000000, 250000, 62500, 15625};
-
-/*
- *  scales calculated as:
- *  rates_to_lsb[sample_rate] / (1 << pga);
- *  pga is 1 for 0, 2
- */
-
 static const int mcp3422_scales[4][4] = {
-	{ 1000000, 250000, 62500, 15625 },
-	{ 500000 , 125000, 31250, 7812 },
-	{ 250000 , 62500 , 15625, 3906 },
-	{ 125000 , 31250 , 7812 , 1953 } };
+	{ 1000000, 500000, 250000, 125000 },
+	{ 250000 , 125000, 62500 , 31250  },
+	{ 62500  , 31250 , 15625 , 7812   },
+	{ 15625  , 7812  , 3906  , 1953   } };
 
 /* Constant msleep times for data acquisitions */
 static const int mcp3422_read_times[4] = {

drivers/iio/adc/qcom-spmi-iadc.c

@@ -296,7 +296,8 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
 	if (iadc->poll_eoc) {
 		ret = iadc_poll_wait_eoc(iadc, wait);
 	} else {
-		ret = wait_for_completion_timeout(&iadc->complete, wait);
+		ret = wait_for_completion_timeout(&iadc->complete,
+			usecs_to_jiffies(wait));
 		if (!ret)
 			ret = -ETIMEDOUT;
 		else

drivers/iio/common/ssp_sensors/ssp_dev.c

@@ -640,6 +640,7 @@ static int ssp_remove(struct spi_device *spi)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ssp_suspend(struct device *dev)
 {
 	int ret;
@@ -688,6 +689,7 @@ static int ssp_resume(struct device *dev)
 
 	return 0;
 }
+#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops ssp_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume)

drivers/iio/dac/ad5686.c

@@ -322,7 +322,7 @@ static int ad5686_probe(struct spi_device *spi)
 	st = iio_priv(indio_dev);
 	spi_set_drvdata(spi, indio_dev);
 
-	st->reg = devm_regulator_get(&spi->dev, "vcc");
+	st->reg = devm_regulator_get_optional(&spi->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)

drivers/iio/humidity/dht11.c

@@ -29,6 +29,7 @@
 #include <linux/wait.h>
 #include <linux/bitops.h>
 #include <linux/completion.h>
+#include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
@@ -39,8 +40,12 @@
 
 #define DHT11_DATA_VALID_TIME	2000000000  /* 2s in ns */
 
-#define DHT11_EDGES_PREAMBLE 4
+#define DHT11_EDGES_PREAMBLE 2
 #define DHT11_BITS_PER_READ 40
+/*
+ * Note that when reading the sensor actually 84 edges are detected, but
+ * since the last edge is not significant, we only store 83:
+ */
 #define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1)
 
 /* Data transmission timing (nano seconds) */
@@ -57,6 +62,7 @@ struct dht11 {
 	int				irq;
 
 	struct completion		completion;
+	struct mutex			lock;
 
 	s64				timestamp;
 	int				temperature;
@@ -88,7 +94,7 @@ static int dht11_decode(struct dht11 *dht11, int offset)
 	unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
 
 	/* Calculate timestamp resolution */
-	for (i = 0; i < dht11->num_edges; ++i) {
+	for (i = 1; i < dht11->num_edges; ++i) {
 		t = dht11->edges[i].ts - dht11->edges[i-1].ts;
 		if (t > 0 && t < timeres)
 			timeres = t;
@@ -138,6 +144,27 @@ static int dht11_decode(struct dht11 *dht11, int offset)
 	return 0;
 }
 
+/*
+ * IRQ handler called on GPIO edges
+ */
+static irqreturn_t dht11_handle_irq(int irq, void *data)
+{
+	struct iio_dev *iio = data;
+	struct dht11 *dht11 = iio_priv(iio);
+
+	/* TODO: Consider making the handler safe for IRQ sharing */
+	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
+		dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
+		dht11->edges[dht11->num_edges++].value =
+						gpio_get_value(dht11->gpio);
+
+		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
+			complete(&dht11->completion);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int dht11_read_raw(struct iio_dev *iio_dev,
 			const struct iio_chan_spec *chan,
 			int *val, int *val2, long m)
@@ -145,6 +172,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 	struct dht11 *dht11 = iio_priv(iio_dev);
 	int ret;
 
+	mutex_lock(&dht11->lock);
 	if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
 		reinit_completion(&dht11->completion);
 
@@ -157,8 +185,17 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		if (ret)
 			goto err;
 
+		ret = request_irq(dht11->irq, dht11_handle_irq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  iio_dev->name, iio_dev);
+		if (ret)
+			goto err;
+
 		ret = wait_for_completion_killable_timeout(&dht11->completion,
 								 HZ);
+
+		free_irq(dht11->irq, iio_dev);
+
 		if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) {
 			dev_err(&iio_dev->dev,
 					"Only %d signal edges detected\n",
@@ -185,6 +222,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		ret = -EINVAL;
 err:
 	dht11->num_edges = -1;
+	mutex_unlock(&dht11->lock);
 	return ret;
 }
 
@@ -193,27 +231,6 @@ static const struct iio_info dht11_iio_info = {
 	.read_raw		= dht11_read_raw,
 };
 
-/*
- * IRQ handler called on GPIO edges
-*/
-static irqreturn_t dht11_handle_irq(int irq, void *data)
-{
-	struct iio_dev *iio = data;
-	struct dht11 *dht11 = iio_priv(iio);
-
-	/* TODO: Consider making the handler safe for IRQ sharing */
-	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
-		dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
-		dht11->edges[dht11->num_edges++].value =
-						gpio_get_value(dht11->gpio);
-
-		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
-			complete(&dht11->completion);
-	}
-
-	return IRQ_HANDLED;
-}
-
 static const struct iio_chan_spec dht11_chan_spec[] = {
 	{ .type = IIO_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), },
@@ -256,11 +273,6 @@ static int dht11_probe(struct platform_device *pdev)
 		dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
 		return -EINVAL;
 	}
-	ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				pdev->name, iio);
-	if (ret)
-		return ret;
 
 	dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1;
 	dht11->num_edges = -1;
@@ -268,6 +280,7 @@ static int dht11_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, iio);
 
 	init_completion(&dht11->completion);
+	mutex_init(&dht11->lock);
 	iio->name = pdev->name;
 	iio->dev.parent = &pdev->dev;
 	iio->info = &dht11_iio_info;

drivers/iio/humidity/si7020.c

@@ -45,12 +45,12 @@ static int si7020_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
 {
-	struct i2c_client *client = iio_priv(indio_dev);
+	struct i2c_client **client = iio_priv(indio_dev);
 	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = i2c_smbus_read_word_data(client,
+		ret = i2c_smbus_read_word_data(*client,
 					       chan->type == IIO_TEMP ?
 					       SI7020CMD_TEMP_HOLD :
 					       SI7020CMD_RH_HOLD);
@@ -126,7 +126,7 @@ static int si7020_probe(struct i2c_client *client,
 	/* Wait the maximum power-up time after software reset. */
 	msleep(15);
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client));
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 

drivers/iio/imu/adis16400_core.c

@@ -26,6 +26,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/debugfs.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -414,7 +415,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		mutex_unlock(&indio_dev->mlock);
 		if (ret)
 			return ret;
-		val16 = ((val16 & 0xFFF) << 4) >> 4;
+		val16 = sign_extend32(val16, 11);
 		*val = val16;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -780,7 +780,11 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, indio_dev);
 	indio_dev->dev.parent = &client->dev;
-	indio_dev->name = id->name;
+	/* id will be NULL when enumerated via ACPI */
+	if (id)
+		indio_dev->name = (char *)id->name;
+	else
+		indio_dev->name = (char *)dev_name(&client->dev);
 	indio_dev->channels = inv_mpu_channels;
 	indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
 

drivers/iio/light/Kconfig

@@ -73,6 +73,7 @@ config CM36651
 config GP2AP020A00F
 	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select IRQ_WORK
@@ -126,6 +127,7 @@ config HID_SENSOR_PROX
 config JSA1212
 	tristate "JSA1212 ALS and proximity sensor driver"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say Y here if you want to build a IIO driver for JSA1212
 	 proximity & ALS sensor device.

drivers/iio/magnetometer/Kconfig

@@ -18,6 +18,8 @@ config AK8975
 
 config AK09911
 	tristate "Asahi Kasei AK09911 3-axis Compass"
+	depends on I2C
+	depends on GPIOLIB
 	select AK8975
 	help
 	  Deprecated: AK09911 is now supported by AK8975 driver.

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -426,7 +426,6 @@ static int pci171x_ai_insn_read(struct comedi_device *dev,
 				unsigned int *data)
 {
 	struct pci1710_private *devpriv = dev->private;
-	unsigned int chan = CR_CHAN(insn->chanspec);
 	int ret = 0;
 	int i;
 
@@ -447,7 +446,7 @@ static int pci171x_ai_insn_read(struct comedi_device *dev,
 		if (ret)
 			break;
 
-		ret = pci171x_ai_read_sample(dev, s, chan, &val);
+		ret = pci171x_ai_read_sample(dev, s, 0, &val);
 		if (ret)
 			break;
 

drivers/staging/comedi/drivers/comedi_isadma.c

@@ -91,10 +91,11 @@ unsigned int comedi_isadma_disable_on_sample(unsigned int dma_chan,
 			stalled++;
 			if (stalled > 10)
 				break;
-		}
+		} else {
 			residue = new_residue;
 			stalled = 0;
 		}
+	}
 	return residue;
 }
 EXPORT_SYMBOL_GPL(comedi_isadma_disable_on_sample);

drivers/staging/comedi/drivers/vmk80xx.c

@@ -103,11 +103,6 @@ enum vmk80xx_model {
 	VMK8061_MODEL
 };
 
-struct firmware_version {
-	unsigned char ic3_vers[32];	/* USB-Controller */
-	unsigned char ic6_vers[32];	/* CPU */
-};
-
 static const struct comedi_lrange vmk8061_range = {
 	2, {
 		UNI_RANGE(5),
@@ -156,68 +151,12 @@ static const struct vmk80xx_board vmk80xx_boardinfo[] = {
 struct vmk80xx_private {
 	struct usb_endpoint_descriptor *ep_rx;
 	struct usb_endpoint_descriptor *ep_tx;
-	struct firmware_version fw;
 	struct semaphore limit_sem;
 	unsigned char *usb_rx_buf;
 	unsigned char *usb_tx_buf;
 	enum vmk80xx_model model;
 };
 
-static int vmk80xx_check_data_link(struct comedi_device *dev)
-{
-	struct vmk80xx_private *devpriv = dev->private;
-	struct usb_device *usb = comedi_to_usb_dev(dev);
-	unsigned int tx_pipe;
-	unsigned int rx_pipe;
-	unsigned char tx[1];
-	unsigned char rx[2];
-
-	tx_pipe = usb_sndbulkpipe(usb, 0x01);
-	rx_pipe = usb_rcvbulkpipe(usb, 0x81);
-
-	tx[0] = VMK8061_CMD_RD_PWR_STAT;
-
-	/*
-	 * Check that IC6 (PIC16F871) is powered and
-	 * running and the data link between IC3 and
-	 * IC6 is working properly
-	 */
-	usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, rx, 2, NULL, HZ * 10);
-
-	return (int)rx[1];
-}
-
-static void vmk80xx_read_eeprom(struct comedi_device *dev, int flag)
-{
-	struct vmk80xx_private *devpriv = dev->private;
-	struct usb_device *usb = comedi_to_usb_dev(dev);
-	unsigned int tx_pipe;
-	unsigned int rx_pipe;
-	unsigned char tx[1];
-	unsigned char rx[64];
-	int cnt;
-
-	tx_pipe = usb_sndbulkpipe(usb, 0x01);
-	rx_pipe = usb_rcvbulkpipe(usb, 0x81);
-
-	tx[0] = VMK8061_CMD_RD_VERSION;
-
-	/*
-	 * Read the firmware version info of IC3 and
-	 * IC6 from the internal EEPROM of the IC
-	 */
-	usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, rx, 64, &cnt, HZ * 10);
-
-	rx[cnt] = '\0';
-
-	if (flag & IC3_VERSION)
-		strncpy(devpriv->fw.ic3_vers, rx + 1, 24);
-	else			/* IC6_VERSION */
-		strncpy(devpriv->fw.ic6_vers, rx + 25, 24);
-}
-
 static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
 {
 	struct vmk80xx_private *devpriv = dev->private;
@@ -878,16 +817,6 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
 
 	usb_set_intfdata(intf, devpriv);
 
-	if (devpriv->model == VMK8061_MODEL) {
-		vmk80xx_read_eeprom(dev, IC3_VERSION);
-		dev_info(&intf->dev, "%s\n", devpriv->fw.ic3_vers);
-
-		if (vmk80xx_check_data_link(dev)) {
-			vmk80xx_read_eeprom(dev, IC6_VERSION);
-			dev_info(&intf->dev, "%s\n", devpriv->fw.ic6_vers);
-		}
-	}
-
 	if (devpriv->model == VMK8055_MODEL)
 		vmk80xx_reset_device(dev);
 

drivers/staging/iio/adc/mxs-lradc.c

@@ -214,11 +214,17 @@ struct mxs_lradc {
 	unsigned long		is_divided;
 
 	/*
-	 * Touchscreen LRADC channels receives a private slot in the CTRL4
-	 * register, the slot #7. Therefore only 7 slots instead of 8 in the
-	 * CTRL4 register can be mapped to LRADC channels when using the
-	 * touchscreen.
-	 *
+	 * When the touchscreen is enabled, we give it two private virtual
+	 * channels: #6 and #7. This means that only 6 virtual channels (instead
+	 * of 8) will be available for buffered capture.
+	 */
+#define TOUCHSCREEN_VCHANNEL1		7
+#define TOUCHSCREEN_VCHANNEL2		6
+#define BUFFER_VCHANS_LIMITED		0x3f
+#define BUFFER_VCHANS_ALL		0xff
+	u8			buffer_vchans;
+
+	/*
 	 * Furthermore, certain LRADC channels are shared between touchscreen
 	 * and/or touch-buttons and generic LRADC block. Therefore when using
 	 * either of these, these channels are not available for the regular
@@ -342,6 +348,9 @@ struct mxs_lradc {
 #define	LRADC_CTRL4				0x140
 #define	LRADC_CTRL4_LRADCSELECT_MASK(n)		(0xf << ((n) * 4))
 #define	LRADC_CTRL4_LRADCSELECT_OFFSET(n)	((n) * 4)
+#define	LRADC_CTRL4_LRADCSELECT(n, x) \
+				(((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
+				LRADC_CTRL4_LRADCSELECT_MASK(n))
 
 #define LRADC_RESOLUTION			12
 #define LRADC_SINGLE_SAMPLE_MASK		((1 << LRADC_RESOLUTION) - 1)
@@ -416,6 +425,14 @@ static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
 					LRADC_STATUS_TOUCH_DETECT_RAW);
 }
 
+static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch,
+				  unsigned ch)
+{
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch),
+				LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4);
+}
+
 static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
 {
 	/*
@@ -450,12 +467,8 @@ static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
 		LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
 			LRADC_DELAY(3));
 
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) |
-			LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) |
-			LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1);
 
-	/* wake us again, when the complete conversion is done */
-	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch), LRADC_CTRL1);
 	/*
 	 * after changing the touchscreen plates setting
 	 * the signals need some initial time to settle. Start the
@@ -509,12 +522,8 @@ static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
 		LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
 					LRADC_DELAY(3));
 
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) |
-			LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) |
-			LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1);
 
-	/* wake us again, when the conversions are done */
-	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch2), LRADC_CTRL1);
 	/*
 	 * after changing the touchscreen plates setting
 	 * the signals need some initial time to settle. Start the
@@ -580,36 +589,6 @@ static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc,
 #define TS_CH_XM 4
 #define TS_CH_YM 5
 
-static int mxs_lradc_read_ts_channel(struct mxs_lradc *lradc)
-{
-	u32 reg;
-	int val;
-
-	reg = readl(lradc->base + LRADC_CTRL1);
-
-	/* only channels 3 to 5 are of interest here */
-	if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YP)) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YP) |
-			LRADC_CTRL1_LRADC_IRQ(TS_CH_YP), LRADC_CTRL1);
-		val = mxs_lradc_read_raw_channel(lradc, TS_CH_YP);
-	} else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_XM)) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_XM) |
-			LRADC_CTRL1_LRADC_IRQ(TS_CH_XM), LRADC_CTRL1);
-		val = mxs_lradc_read_raw_channel(lradc, TS_CH_XM);
-	} else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YM)) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YM) |
-			LRADC_CTRL1_LRADC_IRQ(TS_CH_YM), LRADC_CTRL1);
-		val = mxs_lradc_read_raw_channel(lradc, TS_CH_YM);
-	} else {
-		return -EIO;
-	}
-
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
-
-	return val;
-}
-
 /*
  * YP(open)--+-------------+
  *           |             |--+
@@ -653,7 +632,8 @@ static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc)
 	mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
 
 	lradc->cur_plate = LRADC_SAMPLE_X;
-	mxs_lradc_setup_ts_channel(lradc, TS_CH_YP);
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
+	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
 }
 
 /*
@@ -674,7 +654,8 @@ static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc)
 	mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
 
 	lradc->cur_plate = LRADC_SAMPLE_Y;
-	mxs_lradc_setup_ts_channel(lradc, TS_CH_XM);
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
+	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
 }
 
 /*
@@ -695,7 +676,10 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
 	mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
 
 	lradc->cur_plate = LRADC_SAMPLE_PRESSURE;
-	mxs_lradc_setup_ts_pressure(lradc, TS_CH_XP, TS_CH_YM);
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
+	mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2,
+						TOUCHSCREEN_VCHANNEL1);
 }
 
 static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
@@ -708,6 +692,19 @@ static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
 	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
 }
 
+static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
+				LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc,
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), LRADC_CTRL1);
+	/*
+	 * start with the Y-pos, because it uses nearly the same plate
+	 * settings like the touch detection
+	 */
+	mxs_lradc_prepare_y_pos(lradc);
+}
+
 static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc)
 {
 	input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos);
@@ -725,10 +722,12 @@ static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc)
 	 * start a dummy conversion to burn time to settle the signals
 	 * note: we are not interested in the conversion's value
 	 */
-	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(5));
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1);
-	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(5), LRADC_CTRL1);
-	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << 5) |
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1));
+	mxs_lradc_reg_clear(lradc,
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
+	mxs_lradc_reg_wrt(lradc,
+		LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
 		LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
 			LRADC_DELAY(2));
 }
@@ -760,59 +759,45 @@ static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid)
 
 	/* if it is released, wait for the next touch via IRQ */
 	lradc->cur_plate = LRADC_TOUCH;
-	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1);
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), LRADC_CTRL1);
 	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
 }
 
 /* touchscreen's state machine */
 static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
 {
-	int val;
-
 	switch (lradc->cur_plate) {
 	case LRADC_TOUCH:
-		/*
-		 * start with the Y-pos, because it uses nearly the same plate
-		 * settings like the touch detection
-		 */
-		if (mxs_lradc_check_touch_event(lradc)) {
-			mxs_lradc_reg_clear(lradc,
-					LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
-					LRADC_CTRL1);
-			mxs_lradc_prepare_y_pos(lradc);
-		}
+		if (mxs_lradc_check_touch_event(lradc))
+			mxs_lradc_start_touch_event(lradc);
 		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
 					LRADC_CTRL1);
 		return;
 
 	case LRADC_SAMPLE_Y:
-		val = mxs_lradc_read_ts_channel(lradc);
-		if (val < 0) {
-			mxs_lradc_enable_touch_detection(lradc); /* re-start */
-			return;
-		}
-		lradc->ts_y_pos = val;
+		lradc->ts_y_pos = mxs_lradc_read_raw_channel(lradc,
+							TOUCHSCREEN_VCHANNEL1);
 		mxs_lradc_prepare_x_pos(lradc);
 		return;
 
 	case LRADC_SAMPLE_X:
-		val = mxs_lradc_read_ts_channel(lradc);
-		if (val < 0) {
-			mxs_lradc_enable_touch_detection(lradc); /* re-start */
-			return;
-		}
-		lradc->ts_x_pos = val;
+		lradc->ts_x_pos = mxs_lradc_read_raw_channel(lradc,
+							TOUCHSCREEN_VCHANNEL1);
 		mxs_lradc_prepare_pressure(lradc);
 		return;
 
 	case LRADC_SAMPLE_PRESSURE:
-		lradc->ts_pressure =
-			mxs_lradc_read_ts_pressure(lradc, TS_CH_XP, TS_CH_YM);
+		lradc->ts_pressure = mxs_lradc_read_ts_pressure(lradc,
+							TOUCHSCREEN_VCHANNEL2,
+							TOUCHSCREEN_VCHANNEL1);
 		mxs_lradc_complete_touch_event(lradc);
 		return;
 
 	case LRADC_SAMPLE_VALID:
-		val = mxs_lradc_read_ts_channel(lradc); /* ignore the value */
 		mxs_lradc_finish_touch_event(lradc, 1);
 		break;
 	}
@@ -844,9 +829,9 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
 	 * used if doing raw sampling.
 	 */
 	if (lradc->soc == IMX28_LRADC)
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0),
 			LRADC_CTRL1);
-	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0);
 
 	/* Enable / disable the divider per requirement */
 	if (test_bit(chan, &lradc->is_divided))
@@ -1090,9 +1075,8 @@ static void mxs_lradc_disable_ts(struct mxs_lradc *lradc)
 {
 	/* stop all interrupts from firing */
 	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
-		LRADC_CTRL1_LRADC_IRQ_EN(2) | LRADC_CTRL1_LRADC_IRQ_EN(3) |
-		LRADC_CTRL1_LRADC_IRQ_EN(4) | LRADC_CTRL1_LRADC_IRQ_EN(5),
-		LRADC_CTRL1);
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
 
 	/* Power-down touchscreen touch-detect circuitry. */
 	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
@@ -1158,26 +1142,31 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
 	struct iio_dev *iio = data;
 	struct mxs_lradc *lradc = iio_priv(iio);
 	unsigned long reg = readl(lradc->base + LRADC_CTRL1);
+	uint32_t clr_irq = mxs_lradc_irq_mask(lradc);
 	const uint32_t ts_irq_mask =
 		LRADC_CTRL1_TOUCH_DETECT_IRQ |
-		LRADC_CTRL1_LRADC_IRQ(2) |
-		LRADC_CTRL1_LRADC_IRQ(3) |
-		LRADC_CTRL1_LRADC_IRQ(4) |
-		LRADC_CTRL1_LRADC_IRQ(5);
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
 
 	if (!(reg & mxs_lradc_irq_mask(lradc)))
 		return IRQ_NONE;
 
-	if (lradc->use_touchscreen && (reg & ts_irq_mask))
+	if (lradc->use_touchscreen && (reg & ts_irq_mask)) {
 		mxs_lradc_handle_touch(lradc);
 
-	if (iio_buffer_enabled(iio))
+		/* Make sure we don't clear the next conversion's interrupt. */
+		clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+				LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
+	}
+
+	if (iio_buffer_enabled(iio)) {
+		if (reg & lradc->buffer_vchans)
 			iio_trigger_poll(iio->trig);
-	else if (reg & LRADC_CTRL1_LRADC_IRQ(0))
+	} else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) {
 		complete(&lradc->completion);
+	}
 
-	mxs_lradc_reg_clear(lradc, reg & mxs_lradc_irq_mask(lradc),
-			LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1);
 
 	return IRQ_HANDLED;
 }
@@ -1289,9 +1278,10 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
 	}
 
 	if (lradc->soc == IMX28_LRADC)
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+		mxs_lradc_reg_clear(lradc,
+			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
 			LRADC_CTRL1);
-	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
 
 	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
 		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
@@ -1324,9 +1314,10 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
 	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
 					LRADC_DELAY_KICK, LRADC_DELAY(0));
 
-	mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0);
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
 	if (lradc->soc == IMX28_LRADC)
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
+		mxs_lradc_reg_clear(lradc,
+			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
 			LRADC_CTRL1);
 
 	kfree(lradc->buffer);
@@ -1353,7 +1344,7 @@ static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio,
 	if (lradc->use_touchbutton)
 		rsvd_chans++;
 	if (lradc->use_touchscreen)
-		rsvd_chans++;
+		rsvd_chans += 2;
 
 	/* Test for attempts to map channels with special mode of operation. */
 	if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS))
@@ -1413,6 +1404,13 @@ static const struct iio_chan_spec mxs_lradc_chan_spec[] = {
 		.channel = 8,
 		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
 	},
+	/* Hidden channel to keep indexes */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = -1,
+		.channel = 9,
+	},
 	MXS_ADC_CHAN(10, IIO_VOLTAGE),	/* VDDIO */
 	MXS_ADC_CHAN(11, IIO_VOLTAGE),	/* VTH */
 	MXS_ADC_CHAN(12, IIO_VOLTAGE),	/* VDDA */
@@ -1583,6 +1581,11 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 
 	touch_ret = mxs_lradc_probe_touchscreen(lradc, node);
 
+	if (touch_ret == 0)
+		lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
+	else
+		lradc->buffer_vchans = BUFFER_VCHANS_ALL;
+
 	/* Grab all IRQ sources */
 	for (i = 0; i < of_cfg->irq_count; i++) {
 		lradc->irq[i] = platform_get_irq(pdev, i);

drivers/staging/iio/resolver/ad2s1200.c

@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -68,7 +69,7 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
 		break;
 	case IIO_ANGL_VEL:
 		vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
-		vel = (vel << 4) >> 4;
+		vel = sign_extend32(vel, 11);
 		*val = vel;
 		break;
 	default: