PCI: dra7xx: Add TI DRA7xx PCIe driver

Add support for PCIe controller in DRA7xx.  This driver re-uses the
designware core code that is already present in kernel.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/pci/ti-pci.txt

+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+	       The second entry must be "rc-dbics" for the designware pcie
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+	       number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+	       where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+		main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+   #size-cells,
+   #interrupt-cells,
+   device_type,
+   ranges,
+   num-lanes,
+   interrupt-map-mask,
+   interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0x51000000 0x51000000 0x3000
+		  0x0	     0x20000000 0x10000000>;
+	pcie@51000000 {
+		compatible = "ti,dra7-pcie";
+		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+		reg-names = "rc_dbics", "ti_conf", "config";
+		interrupts = <0 232 0x4>, <0 233 0x4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x03000 0 0x00010000
+			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+		ti,hwmods = "pcie1";
+		phys = <&pcie1_phy>;
+		phy-names = "pcie-phy0";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};

MAINTAINERS

@@ -6796,6 +6796,14 @@ S:	Supported
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/host/pci-tegra.c
 
+PCI DRIVER FOR TI DRA7XX
+M:	Kishon Vijay Abraham I <kishon@ti.com>
+L:	linux-omap@vger.kernel.org
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/ti-pci.txt
+F:	drivers/pci/host/pci-dra7xx.c
+
 PCI DRIVER FOR RENESAS R-CAR
 M:	Simon Horman <horms@verge.net.au>
 L:	linux-pci@vger.kernel.org

drivers/pci/host/Kconfig

 menu "PCI host controller drivers"
 	depends on PCI
 
+config PCI_DRA7XX
+	bool "TI DRA7xx PCIe controller"
+	select PCIE_DW
+	depends on OF && HAS_IOMEM && TI_PIPE3
+	help
+	 Enables support for the PCIe controller in the DRA7xx SoC.  There
+	 are two instances of PCIe controller in DRA7xx.  This controller can
+	 act both as EP and RC.  This reuses the Designware core.
+
 config PCI_MVEBU
 	bool "Marvell EBU PCIe controller"
 	depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD

drivers/pci/host/Makefile

 obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o