ARM: dts: qcom: msm8974-hammerhead: add touchscreen support

Add support for the Synaptics RMI4 touchscreen that is found on the
Nexus 5.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

@@ -280,6 +280,16 @@ mux {
 			};
 		};
 
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		i2c3_pins: i2c3 {
 			mux {
 				pins = "gpio10", "gpio11";
@@ -306,6 +316,25 @@ irq {
 				input-enable;
 			};
 		};
+
+		touch_pin: touch {
+			int {
+				pins = "gpio5";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+
+			reset {
+				pins = "gpio8";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
@@ -424,6 +453,41 @@ charger: bq24192@6b {
 		};
 	};
 
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@70 {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x70>;
+
+			interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touch_pin>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f12@12 {
+				reg = <0x12>;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
 	i2c@f9925000 {
 		status = "ok";
 		pinctrl-names = "default";