Skip to content

L
linux
Commit 482c3e88 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "A couple of interesting new SoC platforms are now supported, these are
  the respective DTS sources:

   - Samsung Exynos5433 mobile phone platform, including an (almost)
     fully supported phone reference board.
   - Hisilicon Hip07 server platform and D05 board, the latest iteration
     of their product line, now with 64 Cortex-A72 cores across two
     sockets.
   - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
     line, used in Android tablets and ultra-cheap development boards
   - NXP LS1046A Communication processor, improving on the earlier
     LS1043A with faster CPU cores
   - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
     mobile phone SoCs
   - Early support for the Nvidia Tegra Tegra186 SoC
   - Amlogic S905D is a minor variant of their existing Android consumer
     product line
   - Rockchip PX5 automotive platform, a close relative of their popular
     rk3368 Android tablet chips

  Aside from the respective evaluation platforms for the above chips,
  there are only a few consumer devices and boards added this time:

   - Huawei Nexus 6P (Angler) mobile phone
   - LG Nexus 5x (Bullhead) mobile phone
   - Nexbox A1 and A95X Android TV boxes
   - Pine64 development board based on Allwinner A64
   - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
   - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board

  For the existing platforms, we get bug fixes and new peripheral
  support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
  Rockchip, Berlin, and ZTE"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
  arm64: dts: fix build errors from missing dependencies
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM: dts: artpec: add pcie support
  arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
  arm64: dts: berlin4ct-stb: add missing unit name to /memory node
  arm64: dts: berlin4ct: add missing unit name to /soc node
  arm64: dts: qcom: msm8916: Add ddr support to sdhc1
  arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM64: dts: Add support for Meson GXM
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  ...
parents 786a72d7 09a56651
Expand all Show whitespace changes
Inline Side-by-side
Showing with 12147 additions and 709 deletions
Documentation/devicetree/bindings/arm/amlogic.txt
View file @ 482c3e88
...@@ -17,6 +17,18 @@ Boards with the Amlogic Meson GXBaby SoC shall have the following properties: ...@@ -17,6 +17,18 @@ Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
Required root node property: Required root node property:
compatible: "amlogic,meson-gxbb"; compatible: "amlogic,meson-gxbb";
Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
Required root node property:
compatible: "amlogic,s905x", "amlogic,meson-gxl";
Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
Required root node property:
compatible: "amlogic,s905d", "amlogic,meson-gxl";
Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
Required root node property:
compatible: "amlogic,s912", "amlogic,meson-gxm";
Board compatible values: Board compatible values:
- "geniatech,atv1200" (Meson6) - "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8) - "minix,neo-x8" (Meson8)
...@@ -28,3 +40,10 @@ Board compatible values: ...@@ -28,3 +40,10 @@ Board compatible values:
- "hardkernel,odroid-c2" (Meson gxbb) - "hardkernel,odroid-c2" (Meson gxbb)
- "amlogic,p200" (Meson gxbb) - "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb) - "amlogic,p201" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
- "amlogic,q200" (Meson gxm s912)
- "amlogic,q201" (Meson gxm s912)
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
- "nexbox,a1" (Meson gxm s912)
Documentation/devicetree/bindings/arm/fsl.txt
View file @ 482c3e88
...@@ -97,7 +97,7 @@ Freescale LS1021A Platform Device Tree Bindings ...@@ -97,7 +97,7 @@ Freescale LS1021A Platform Device Tree Bindings
Required root node compatible properties: Required root node compatible properties:
- compatible = "fsl,ls1021a"; - compatible = "fsl,ls1021a";
Freescale LS1021A SoC-specific Device Tree Bindings Freescale SoC-specific Device Tree Bindings
------------------------------------------- -------------------------------------------
Freescale SCFG Freescale SCFG
...@@ -105,7 +105,11 @@ Freescale SCFG ...@@ -105,7 +105,11 @@ Freescale SCFG
configuration and status registers for the chip. Such as getting PEX port configuration and status registers for the chip. Such as getting PEX port
status. status.
Required properties: Required properties:
- compatible: should be "fsl,ls1021a-scfg" - compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-scfg",
The following <chip>s are known to be supported:
ls1021a, ls1043a, ls1046a, ls2080a.
- reg: should contain base address and length of SCFG memory-mapped registers - reg: should contain base address and length of SCFG memory-mapped registers
Example: Example:
...@@ -119,7 +123,11 @@ Freescale DCFG ...@@ -119,7 +123,11 @@ Freescale DCFG
configuration and status for the device. Such as setting the secondary configuration and status for the device. Such as setting the secondary
core start address and release the secondary core from holdoff and startup. core start address and release the secondary core from holdoff and startup.
Required properties: Required properties:
- compatible: should be "fsl,ls1021a-dcfg" - compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-dcfg",
The following <chip>s are known to be supported:
ls1021a, ls1043a, ls1046a, ls2080a.
- reg : should contain base address and length of DCFG memory-mapped registers - reg : should contain base address and length of DCFG memory-mapped registers
Example: Example:
...@@ -131,6 +139,10 @@ Example: ...@@ -131,6 +139,10 @@ Example:
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
---------------------------------------------------------------- ----------------------------------------------------------------
LS1043A SoC
Required root node properties:
- compatible = "fsl,ls1043a";
LS1043A ARMv8 based RDB Board LS1043A ARMv8 based RDB Board
Required root node properties: Required root node properties:
- compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
...@@ -139,6 +151,22 @@ LS1043A ARMv8 based QDS Board ...@@ -139,6 +151,22 @@ LS1043A ARMv8 based QDS Board
Required root node properties: Required root node properties:
- compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; - compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
LS1046A SoC
Required root node properties:
- compatible = "fsl,ls1046a";
LS1046A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
LS1046A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
LS2080A SoC
Required root node properties:
- compatible = "fsl,ls2080a";
LS2080A ARMv8 based Simulator model LS2080A ARMv8 based Simulator model
Required root node properties: Required root node properties:
- compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
......
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
View file @ 482c3e88
...@@ -28,6 +28,10 @@ HiP06 D03 Board ...@@ -28,6 +28,10 @@ HiP06 D03 Board
Required root node properties: Required root node properties:
- compatible = "hisilicon,hip06-d03"; - compatible = "hisilicon,hip06-d03";
HiP07 D05 Board
Required root node properties:
- compatible = "hisilicon,hip07-d05";
Hisilicon system controller Hisilicon system controller
Required properties: Required properties:
......
Documentation/devicetree/bindings/arm/qcom.txt
View file @ 482c3e88
...@@ -21,6 +21,8 @@ The 'SoC' element must be one of the following strings: ...@@ -21,6 +21,8 @@ The 'SoC' element must be one of the following strings:
apq8096 apq8096
msm8916 msm8916
msm8974 msm8974
msm8992
msm8994
msm8996 msm8996
mdm9615 mdm9615
......
Documentation/devicetree/bindings/arm/rockchip.txt
View file @ 482c3e88
...@@ -103,6 +103,18 @@ Rockchip platforms device tree bindings ...@@ -103,6 +103,18 @@ Rockchip platforms device tree bindings
Required root node properties: Required root node properties:
- compatible = "mqmaker,miqi", "rockchip,rk3288"; - compatible = "mqmaker,miqi", "rockchip,rk3288";
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
- Rockchip PX5 Evaluation board:
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
- Rockchip RK1108 Evaluation board
Required root node properties:
- compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
- Rockchip RK3368 evb: - Rockchip RK3368 evb:
Required root node properties: Required root node properties:
- compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
......
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
View file @ 482c3e88
...@@ -15,6 +15,8 @@ Required root node properties: ...@@ -15,6 +15,8 @@ Required root node properties:
- "samsung,xyref5260" - for Exynos5260-based Samsung board. - "samsung,xyref5260" - for Exynos5260-based Samsung board.
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
- "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board. - "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board. - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
......
Documentation/devicetree/bindings/arm/shmobile.txt
View file @ 482c3e88
...@@ -53,7 +53,7 @@ Boards: ...@@ -53,7 +53,7 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100" compatible = "renesas,genmai", "renesas,r7s72100"
- Gose (RTP0RC7793SEB00010S) - Gose (RTP0RC7793SEB00010S)
compatible = "renesas,gose", "renesas,r8a7793" compatible = "renesas,gose", "renesas,r8a7793"
- H3ULCB (RTP0RC7795SKB00010S) - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795"; compatible = "renesas,h3ulcb", "renesas,r8a7795";
- Henninger - Henninger
compatible = "renesas,henninger", "renesas,r8a7791" compatible = "renesas,henninger", "renesas,r8a7791"
...@@ -65,6 +65,8 @@ Boards: ...@@ -65,6 +65,8 @@ Boards:
compatible = "renesas,kzm9g", "renesas,sh73a0" compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S) - Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790" compatible = "renesas,lager", "renesas,r8a7790"
- M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
compatible = "renesas,m3ulcb", "renesas,r8a7796";
- Marzen (R0P7779A00010S) - Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779" compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP) - Porter (M2-LCDP)
......
Documentation/devicetree/bindings/arm/sunxi.txt
View file @ 482c3e88
...@@ -14,4 +14,5 @@ using one of the following compatible strings: ...@@ -14,4 +14,5 @@ using one of the following compatible strings:
allwinner,sun8i-a83t allwinner,sun8i-a83t
allwinner,sun8i-h3 allwinner,sun8i-h3
allwinner,sun9i-a80 allwinner,sun9i-a80
allwinner,sun50i-a64
nextthing,gr8 nextthing,gr8
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
View file @ 482c3e88
...@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller ...@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
Required properties: Required properties:
- reg: Physical base address and size of the controller's register area. - reg: Physical base address and size of the controller's register area.
- compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
chip could be ls1021a, ls2080a, ls1043a etc. chip could be ls1021a, ls1043a, ls1046a, ls2080a etc.
- clocks: Input clock specifier. Refer to common clock bindings. - clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt binding. - interrupts: Interrupt specifier. Refer to interrupt binding.
......
Documentation/devicetree/bindings/clock/qoriq-clock.txt
View file @ 482c3e88
...@@ -32,6 +32,9 @@ Required properties: ...@@ -32,6 +32,9 @@ Required properties:
* "fsl,b4420-clockgen" * "fsl,b4420-clockgen"
* "fsl,b4860-clockgen" * "fsl,b4860-clockgen"
* "fsl,ls1021a-clockgen" * "fsl,ls1021a-clockgen"
* "fsl,ls1043a-clockgen"
* "fsl,ls1046a-clockgen"
* "fsl,ls2080a-clockgen"
Chassis-version clock strings include: Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
......
Documentation/devicetree/bindings/i2c/trivial-devices.txt
View file @ 482c3e88
...@@ -138,6 +138,8 @@ nuvoton,npct501 i2c trusted platform module (TPM) ...@@ -138,6 +138,8 @@ nuvoton,npct501 i2c trusted platform module (TPM)
nuvoton,npct601 i2c trusted platform module (TPM2) nuvoton,npct601 i2c trusted platform module (TPM2)
nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9556 Octal SMBus and I2C registered interface
nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset
nxp,pcf2127 Real-time clock
nxp,pcf2129 Real-time clock
nxp,pcf8563 Real-time clock/calendar nxp,pcf8563 Real-time clock/calendar
nxp,pcf85063 Tiny Real-Time Clock nxp,pcf85063 Tiny Real-Time Clock
oki,ml86v7667 OKI ML86V7667 video decoder oki,ml86v7667 OKI ML86V7667 video decoder
......
Documentation/devicetree/bindings/media/renesas,fcp.txt
View file @ 482c3e88
...@@ -11,15 +11,9 @@ are paired with. These DT bindings currently support the FCPV and FCPF. ...@@ -11,15 +11,9 @@ are paired with. These DT bindings currently support the FCPV and FCPF.
- compatible: Must be one or more of the following - compatible: Must be one or more of the following
- "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP'
- "renesas,r8a7795-fcpf" for R8A7795 (R-Car H3) compatible 'FCP for FDP'
- "renesas,fcpv" for generic compatible 'FCP for VSP' - "renesas,fcpv" for generic compatible 'FCP for VSP'
- "renesas,fcpf" for generic compatible 'FCP for FDP' - "renesas,fcpf" for generic compatible 'FCP for FDP'
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first, followed by the
family-specific and/or generic versions.
- reg: the register base and size for the device registers - reg: the register base and size for the device registers
- clocks: Reference to the functional clock - clocks: Reference to the functional clock
...@@ -32,7 +26,7 @@ Device node example ...@@ -32,7 +26,7 @@ Device node example
------------------- -------------------
fcpvd1: fcp@fea2f000 { fcpvd1: fcp@fea2f000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; compatible = "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>; reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>; clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A7795_PD_A3VP>; power-domains = <&sysc R8A7795_PD_A3VP>;
......
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ 482c3e88
...@@ -197,6 +197,7 @@ neonode Neonode Inc. ...@@ -197,6 +197,7 @@ neonode Neonode Inc.
netgear NETGEAR netgear NETGEAR
netlogic Broadcom Corporation (formerly NetLogic Microsystems) netlogic Broadcom Corporation (formerly NetLogic Microsystems)
netxeon Shenzhen Netxeon Technology CO., LTD netxeon Shenzhen Netxeon Technology CO., LTD
nexbox Nexbox
newhaven Newhaven Display International newhaven Newhaven Display International
ni National Instruments ni National Instruments
nintendo Nintendo nintendo Nintendo
...@@ -222,6 +223,7 @@ parade Parade Technologies Inc. ...@@ -222,6 +223,7 @@ parade Parade Technologies Inc.
pericom Pericom Technology Inc. pericom Pericom Technology Inc.
phytec PHYTEC Messtechnik GmbH phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd picochip Picochip Ltd
pine64 Pine64
pixcir PIXCIR MICROELECTRONICS Co., Ltd pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd. plathome Plat'Home Co., Ltd.
plda PLDA plda PLDA
......
MAINTAINERS
View file @ 482c3e88
...@@ -1042,6 +1042,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) ...@@ -1042,6 +1042,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained S: Maintained
N: sun[x456789]i N: sun[x456789]i
F: arch/arm/boot/dts/ntc-gr8* F: arch/arm/boot/dts/ntc-gr8*
F: arch/arm64/boot/dts/allwinner/
ARM/Allwinner SoC Clock Support ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar> M: Emilio López <emilio@elopez.com.ar>
......
arch/arm64/boot/dts/Makefile
View file @ 482c3e88
dts-dirs += al dts-dirs += al
dts-dirs += allwinner
dts-dirs += altera dts-dirs += altera
dts-dirs += amd dts-dirs += amd
dts-dirs += amlogic dts-dirs += amlogic
......
arch/arm64/boot/dts/allwinner/Makefile 0 → 100644
View file @ 482c3e88
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sun50i-a64-pine64.dts"
/ {
model = "Pine64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
/* TODO: Camera, Ethernet PHY, touchscreen, etc. */
};
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-a64.dtsi"
/ {
model = "Pine64";
compatible = "pine64,pine64", "allwinner,sun50i-a64";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c1_pins {
bias-pull-up;
};
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (C) 2016 ARM Ltd.
* based on the Allwinner H3 dtsi:
* Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
};
};
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ccu: clock@01c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun50i-a64-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 58>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
i2c1_pins: i2c1_pins {
pins = "PH2", "PH3";
function = "i2c1";
};
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
};
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 67>;
resets = <&ccu 46>;
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 68>;
resets = <&ccu 47>;
status = "disabled";
};
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 69>;
resets = <&ccu 48>;
status = "disabled";
};
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 70>;
resets = <&ccu 49>;
status = "disabled";
};
uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 71>;
resets = <&ccu 50>;
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 63>;
resets = <&ccu 42>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 64>;
resets = <&ccu 43>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 65>;
resets = <&ccu 44>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#interrupt-cells = <3>;
};
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
arch/arm64/boot/dts/amlogic/Makefile
View file @ 482c3e88
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
always := $(dtb-y) always := $(dtb-y)
subdir-y := $(dts-dirs) subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
* the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
*/
/ {
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&ethmac {
status = "okay";
};
arch/arm64/boot/dts/amlogic/meson-gx.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Andreas Färber
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
};
l2: l2-cache0 {
compatible = "cache";
};
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
};
};
efuse: efuse {
compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
reset: reset-controller@4404 {
compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x20>;
#reset-cells = <1>;
};
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
};
gic: interrupt-controller@c4301000 {
compatible = "arm,gic-400";
reg = <0x0 0xc4301000 0 0x1000>,
<0x0 0xc4302000 0 0x2000>,
<0x0 0xc4304000 0 0x2000>,
<0x0 0xc4306000 0 0x2000>;
interrupt-controller;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
#address-cells = <0>;
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
};
periphs: periphs@c8834000 {
compatible = "simple-bus";
reg = <0x0 0xc8834000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
rng {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
};
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
mailbox: mailbox@404 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
phy-mode = "rgmii";
status = "disabled";
};
apb: apb@d0000000 {
compatible = "simple-bus";
reg = <0x0 0xd0000000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
sd_emmc_a: mmc@70000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x70000 0x0 0x2000>;
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_b: mmc@72000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x72000 0x0 0x2000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_c: mmc@74000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x74000 0x0 0x2000>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
};
};
};
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Andreas Färber
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@kernel.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "nexbox,a95x", "amlogic,meson-gxbb";
model = "NEXBOX A95X";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
leds {
compatible = "gpio-leds";
blue {
label = "a95x:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rmii_pins>;
pinctrl-names = "default";
phy-mode = "rmii";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
View file @ 482c3e88
...@@ -64,6 +64,18 @@ memory@0 { ...@@ -64,6 +64,18 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>; reg = <0x0 0x0 0x0 0x80000000>;
}; };
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
regulator-name = "USB_OTG_PWR";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
blue { blue {
...@@ -73,6 +85,56 @@ blue { ...@@ -73,6 +85,56 @@ blue {
default-state = "off"; default-state = "off";
}; };
}; };
tflash_vdd: regulator-tflash_vdd {
/*
* signal name from schematics: TFLASH_VDD_EN
*/
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
tf_io: gpio-regulator-tf_io {
compatible = "regulator-gpio";
regulator-name = "TF_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
/*
* signal name from schematics: TF_3V3N_1V8_EN
*/
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <3300000 0
1800000 1>;
};
vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
}; };
&uart_AO { &uart_AO {
...@@ -83,7 +145,7 @@ &uart_AO { ...@@ -83,7 +145,7 @@ &uart_AO {
&ethmac { &ethmac {
status = "okay"; status = "okay";
pinctrl-0 = <&eth_pins>; pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
}; };
...@@ -98,3 +160,58 @@ &i2c_A { ...@@ -98,3 +160,58 @@ &i2c_A {
pinctrl-0 = <&i2c_a_pins>; pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
}; };
&usb0_phy {
status = "okay";
phy-supply = <&usb_otg_pwr>;
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
/* SD */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&tf_io>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc3v3>;
vqmmc-supply = <&vcc1v8>;
};
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
View file @ 482c3e88
...@@ -70,6 +70,61 @@ usb_pwr: regulator-usb-pwrs { ...@@ -70,6 +70,61 @@ usb_pwr: regulator-usb-pwrs {
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
enable-active-high; enable-active-high;
}; };
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
}; };
/* This UART is brought out to the DB9 connector */ /* This UART is brought out to the DB9 connector */
...@@ -81,7 +136,7 @@ &uart_AO { ...@@ -81,7 +136,7 @@ &uart_AO {
&ethmac { &ethmac {
status = "okay"; status = "okay";
pinctrl-0 = <&eth_pins>; pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
}; };
...@@ -107,3 +162,75 @@ &usb0 { ...@@ -107,3 +162,75 @@ &usb0 {
&usb1 { &usb1 {
status = "okay"; status = "okay";
}; };
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
View file @ 482c3e88
...@@ -65,6 +65,39 @@ usb_vbus: regulator-usb0-vbus { ...@@ -65,6 +65,39 @@ usb_vbus: regulator-usb0-vbus {
enable-active-high; enable-active-high;
}; };
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
}; };
&uart_AO { &uart_AO {
...@@ -82,7 +115,7 @@ &ir { ...@@ -82,7 +115,7 @@ &ir {
&ethmac { &ethmac {
status = "okay"; status = "okay";
pinctrl-0 = <&eth_pins>; pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default"; pinctrl-names = "default";
}; };
...@@ -102,3 +135,74 @@ &usb0 { ...@@ -102,3 +135,74 @@ &usb0 {
&usb1 { &usb1 {
status = "okay"; status = "okay";
}; };
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vcc_3v3>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vmmcq-sumpply = <&vcc_1v8>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Andreas Färber
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@kernel.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905x.dtsi"
/ {
compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
model = "NEXBOX A95X (S905X)";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905d.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905D) P230 Development Board";
};
/* P230 has exclusive choice between internal or external PHY */
&ethmac {
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905d.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905D) P231 Development Board";
};
/* P231 has only internal PHY port */
&ethmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxl.dtsi"
/ {
compatible = "amlogic,s905d", "amlogic,meson-gxl";
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905x.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
};
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxl.dtsi"
/ {
compatible = "amlogic,s905x", "amlogic,meson-gxl";
};
/* S905X Only has access to its internal PHY */
&ethmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
/ {
compatible = "amlogic,meson-gxl";
};
&ethmac {
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
};
};
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxl-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
};
};
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxl-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00120 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk",
"emmc_ds";
function = "emmc";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
};
eth-phy-mux {
compatible = "mdio-mux-mmioreg", "mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x55c 0x0 0x4>;
mux-mask = <0xffffffff>;
mdio-parent-bus = <&mdio0>;
internal_mdio: mdio@e40908ff {
reg = <0xe40908ff>;
#address-cells = <1>;
#size-cells = <0>;
internal_phy: ethernet-phy@8 {
compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
reg = <8>;
max-speed = <100>;
};
};
external_mdio: mdio@2009087f {
reg = <0x2009087f>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&hiubus {
clkc: clock-controller@0 {
compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
};
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
&i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxm.dtsi"
/ {
compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm";
model = "NEXBOX A1";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_boot: regulator-vddio-boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
};
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxm.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
model = "Amlogic Meson GXM (S912) Q200 Development Board";
};
/* Q200 has exclusive choice between internal or external PHY */
&ethmac {
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxm.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm";
model = "Amlogic Meson GXM (S912) Q201 Development Board";
};
/* Q201 has only internal PHY port */
&ethmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi 0 → 100644
View file @ 482c3e88
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxl.dtsi"
/ {
compatible = "amlogic,meson-gxm";
cpus {
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
core2 {
cpu = <&cpu2>;
};
core3 {
cpu = <&cpu3>;
};
};
cluster1 {
core0 {
cpu = <&cpu4>;
};
core1 {
cpu = <&cpu5>;
};
core2 {
cpu = <&cpu6>;
};
core3 {
cpu = <&cpu7>;
};
};
};
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
};
};
};
arch/arm64/boot/dts/arm/juno-base.dtsi
View file @ 482c3e88
...@@ -29,6 +29,28 @@ mailbox: mhu@2b1f0000 { ...@@ -29,6 +29,28 @@ mailbox: mhu@2b1f0000 {
clock-names = "apb_pclk"; clock-names = "apb_pclk";
}; };
smmu_pcie: iommu@2b500000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x2b500000 0x0 0x10000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
smmu_etr: iommu@2b600000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x2b600000 0x0 0x10000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
gic: interrupt-controller@2c010000 { gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic"; compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>, reg = <0x0 0x2c010000 0 0x1000>,
...@@ -146,6 +168,7 @@ main_funnel_in_port1: endpoint { ...@@ -146,6 +168,7 @@ main_funnel_in_port1: endpoint {
etr@20070000 { etr@20070000 {
compatible = "arm,coresight-tmc", "arm,primecell"; compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20070000 0 0x1000>; reg = <0 0x20070000 0 0x1000>;
iommus = <&smmu_etr 0>;
clocks = <&soc_smc50mhz>; clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk"; clock-names = "apb_pclk";
...@@ -404,6 +427,8 @@ pcie_ctlr: pcie-controller@40000000 { ...@@ -404,6 +427,8 @@ pcie_ctlr: pcie-controller@40000000 {
<0 0 0 4 &gic 0 0 0 139 4>; <0 0 0 4 &gic 0 0 0 139 4>;
msi-parent = <&v2m_0>; msi-parent = <&v2m_0>;
status = "disabled"; status = "disabled";
iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */
iommu-map = <0x0 &smmu_pcie 0x0 0x1>;
}; };
scpi { scpi {
...@@ -484,6 +509,48 @@ gpu1_thermal_zone: gpu1 { ...@@ -484,6 +509,48 @@ gpu1_thermal_zone: gpu1 {
/include/ "juno-clocks.dtsi" /include/ "juno-clocks.dtsi"
smmu_dma: iommu@7fb00000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb00000 0x0 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
smmu_hdlcd1: iommu@7fb10000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb10000 0x0 0x10000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
status = "disabled";
};
smmu_hdlcd0: iommu@7fb20000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb20000 0x0 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
status = "disabled";
};
smmu_usb: iommu@7fb30000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb30000 0x0 0x10000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
dma@7ff00000 { dma@7ff00000 {
compatible = "arm,pl330", "arm,primecell"; compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0x7ff00000 0 0x1000>; reg = <0x0 0x7ff00000 0 0x1000>;
...@@ -499,6 +566,15 @@ dma@7ff00000 { ...@@ -499,6 +566,15 @@ dma@7ff00000 {
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_dma 0>,
<&smmu_dma 1>,
<&smmu_dma 2>,
<&smmu_dma 3>,
<&smmu_dma 4>,
<&smmu_dma 5>,
<&smmu_dma 6>,
<&smmu_dma 7>,
<&smmu_dma 8>;
clocks = <&soc_faxiclk>; clocks = <&soc_faxiclk>;
clock-names = "apb_pclk"; clock-names = "apb_pclk";
}; };
...@@ -507,6 +583,7 @@ hdlcd@7ff50000 { ...@@ -507,6 +583,7 @@ hdlcd@7ff50000 {
compatible = "arm,hdlcd"; compatible = "arm,hdlcd";
reg = <0 0x7ff50000 0 0x1000>; reg = <0 0x7ff50000 0 0x1000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_hdlcd1 0>;
clocks = <&scpi_clk 3>; clocks = <&scpi_clk 3>;
clock-names = "pxlclk"; clock-names = "pxlclk";
...@@ -521,6 +598,7 @@ hdlcd@7ff60000 { ...@@ -521,6 +598,7 @@ hdlcd@7ff60000 {
compatible = "arm,hdlcd"; compatible = "arm,hdlcd";
reg = <0 0x7ff60000 0 0x1000>; reg = <0 0x7ff60000 0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_hdlcd0 0>;
clocks = <&scpi_clk 3>; clocks = <&scpi_clk 3>;
clock-names = "pxlclk"; clock-names = "pxlclk";
...@@ -574,6 +652,7 @@ ohci@7ffb0000 { ...@@ -574,6 +652,7 @@ ohci@7ffb0000 {
compatible = "generic-ohci"; compatible = "generic-ohci";
reg = <0x0 0x7ffb0000 0x0 0x10000>; reg = <0x0 0x7ffb0000 0x0 0x10000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_usb 0>;
clocks = <&soc_usb48mhz>; clocks = <&soc_usb48mhz>;
}; };
...@@ -581,6 +660,7 @@ ehci@7ffc0000 { ...@@ -581,6 +660,7 @@ ehci@7ffc0000 {
compatible = "generic-ehci"; compatible = "generic-ehci";
reg = <0x0 0x7ffc0000 0x0 0x10000>; reg = <0x0 0x7ffc0000 0x0 0x10000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_usb 0>;
clocks = <&soc_usb48mhz>; clocks = <&soc_usb48mhz>;
}; };
......
arch/arm64/boot/dts/arm/juno-r1.dts
View file @ 482c3e88
...@@ -90,6 +90,7 @@ A57_0: cpu@0 { ...@@ -90,6 +90,7 @@ A57_0: cpu@0 {
next-level-cache = <&A57_L2>; next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>; clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
}; };
A57_1: cpu@1 { A57_1: cpu@1 {
...@@ -100,6 +101,7 @@ A57_1: cpu@1 { ...@@ -100,6 +101,7 @@ A57_1: cpu@1 {
next-level-cache = <&A57_L2>; next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>; clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
}; };
A53_0: cpu@100 { A53_0: cpu@100 {
...@@ -110,6 +112,7 @@ A53_0: cpu@100 { ...@@ -110,6 +112,7 @@ A53_0: cpu@100 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A53_1: cpu@101 { A53_1: cpu@101 {
...@@ -120,6 +123,7 @@ A53_1: cpu@101 { ...@@ -120,6 +123,7 @@ A53_1: cpu@101 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A53_2: cpu@102 { A53_2: cpu@102 {
...@@ -130,6 +134,7 @@ A53_2: cpu@102 { ...@@ -130,6 +134,7 @@ A53_2: cpu@102 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A53_3: cpu@103 { A53_3: cpu@103 {
...@@ -140,6 +145,7 @@ A53_3: cpu@103 { ...@@ -140,6 +145,7 @@ A53_3: cpu@103 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A57_L2: l2-cache0 { A57_L2: l2-cache0 {
......
arch/arm64/boot/dts/arm/juno-r2.dts
View file @ 482c3e88
...@@ -90,6 +90,7 @@ A72_0: cpu@0 { ...@@ -90,6 +90,7 @@ A72_0: cpu@0 {
next-level-cache = <&A72_L2>; next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>; clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
}; };
A72_1: cpu@1 { A72_1: cpu@1 {
...@@ -100,6 +101,7 @@ A72_1: cpu@1 { ...@@ -100,6 +101,7 @@ A72_1: cpu@1 {
next-level-cache = <&A72_L2>; next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>; clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
}; };
A53_0: cpu@100 { A53_0: cpu@100 {
...@@ -110,6 +112,7 @@ A53_0: cpu@100 { ...@@ -110,6 +112,7 @@ A53_0: cpu@100 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
}; };
A53_1: cpu@101 { A53_1: cpu@101 {
...@@ -120,6 +123,7 @@ A53_1: cpu@101 { ...@@ -120,6 +123,7 @@ A53_1: cpu@101 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
}; };
A53_2: cpu@102 { A53_2: cpu@102 {
...@@ -130,6 +134,7 @@ A53_2: cpu@102 { ...@@ -130,6 +134,7 @@ A53_2: cpu@102 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
}; };
A53_3: cpu@103 { A53_3: cpu@103 {
...@@ -140,6 +145,7 @@ A53_3: cpu@103 { ...@@ -140,6 +145,7 @@ A53_3: cpu@103 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
}; };
A72_L2: l2-cache0 { A72_L2: l2-cache0 {
......
arch/arm64/boot/dts/arm/juno.dts
View file @ 482c3e88
...@@ -90,6 +90,7 @@ A57_0: cpu@0 { ...@@ -90,6 +90,7 @@ A57_0: cpu@0 {
next-level-cache = <&A57_L2>; next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>; clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
}; };
A57_1: cpu@1 { A57_1: cpu@1 {
...@@ -100,6 +101,7 @@ A57_1: cpu@1 { ...@@ -100,6 +101,7 @@ A57_1: cpu@1 {
next-level-cache = <&A57_L2>; next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>; clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
}; };
A53_0: cpu@100 { A53_0: cpu@100 {
...@@ -110,6 +112,7 @@ A53_0: cpu@100 { ...@@ -110,6 +112,7 @@ A53_0: cpu@100 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A53_1: cpu@101 { A53_1: cpu@101 {
...@@ -120,6 +123,7 @@ A53_1: cpu@101 { ...@@ -120,6 +123,7 @@ A53_1: cpu@101 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A53_2: cpu@102 { A53_2: cpu@102 {
...@@ -130,6 +134,7 @@ A53_2: cpu@102 { ...@@ -130,6 +134,7 @@ A53_2: cpu@102 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A53_3: cpu@103 { A53_3: cpu@103 {
...@@ -140,6 +145,7 @@ A53_3: cpu@103 { ...@@ -140,6 +145,7 @@ A53_3: cpu@103 {
next-level-cache = <&A53_L2>; next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>; clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
}; };
A57_L2: l2-cache0 { A57_L2: l2-cache0 {
......
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
View file @ 482c3e88
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
#include "bcm2837.dtsi" #include "bcm2837.dtsi"
#include "bcm2835-rpi.dtsi" #include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ { / {
compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
...@@ -15,13 +16,6 @@ leds { ...@@ -15,13 +16,6 @@ leds {
act { act {
gpios = <&gpio 47 0>; gpios = <&gpio 47 0>;
}; };
pwr {
label = "PWR";
gpios = <&gpio 35 0>;
default-state = "keep";
linux,default-trigger = "default-on";
};
}; };
}; };
......
arch/arm64/boot/dts/broadcom/bcm2837.dtsi
View file @ 482c3e88
#include "bcm283x.dtsi" #include "bcm283x.dtsi"
/ { / {
compatible = "brcm,bcm2836"; compatible = "brcm,bcm2837";
soc { soc {
ranges = <0x7e000000 0x3f000000 0x1000000>, ranges = <0x7e000000 0x3f000000 0x1000000>,
...@@ -74,3 +74,9 @@ &intc { ...@@ -74,3 +74,9 @@ &intc {
interrupt-parent = <&local_intc>; interrupt-parent = <&local_intc>;
interrupts = <8>; interrupts = <8>;
}; };
/* enable thermal sensor with the correct compatible property set */
&thermal {
compatible = "brcm,bcm2837-thermal";
status = "okay";
};
arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi 0 → 120000
View file @ 482c3e88
../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
\ No newline at end of file
arch/arm64/boot/dts/broadcom/ns2-svk.dts
View file @ 482c3e88
...@@ -161,6 +161,10 @@ &sdio0 { ...@@ -161,6 +161,10 @@ &sdio0 {
status = "ok"; status = "ok";
}; };
&sdio1 {
status = "ok";
};
&nand { &nand {
nandcs@0 { nandcs@0 {
compatible = "brcm,nandcs"; compatible = "brcm,nandcs";
...@@ -192,3 +196,37 @@ nand_sel: nand_sel { ...@@ -192,3 +196,37 @@ nand_sel: nand_sel {
groups = "nand_grp"; groups = "nand_grp";
}; };
}; };
&qspi {
bspi-sel = <0>;
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
reg = <0x0>;
spi-max-frequency = <12500000>;
m25p,fast-read;
spi-cpol;
spi-cpha;
partition@0 {
label = "boot";
reg = <0x00000000 0x000a0000>;
};
partition@a0000 {
label = "env";
reg = <0x000a0000 0x00060000>;
};
partition@100000 {
label = "system";
reg = <0x00100000 0x00600000>;
};
partition@700000 {
label = "rootfs";
reg = <0x00700000 0x01900000>;
};
};
};
arch/arm64/boot/dts/broadcom/ns2.dtsi
View file @ 482c3e88
...@@ -133,6 +133,9 @@ pcie0: pcie@20020000 { ...@@ -133,6 +133,9 @@ pcie0: pcie@20020000 {
status = "disabled"; status = "disabled";
phys = <&pci_phy0>;
phy-names = "pcie-phy";
msi-parent = <&msi0>; msi-parent = <&msi0>;
msi0: msi@20020000 { msi0: msi@20020000 {
compatible = "brcm,iproc-msi"; compatible = "brcm,iproc-msi";
...@@ -171,6 +174,9 @@ pcie4: pcie@50020000 { ...@@ -171,6 +174,9 @@ pcie4: pcie@50020000 {
status = "disabled"; status = "disabled";
phys = <&pci_phy1>;
phy-names = "pcie-phy";
msi-parent = <&msi4>; msi-parent = <&msi4>;
msi4: msi@50020000 { msi4: msi@50020000 {
compatible = "brcm,iproc-msi"; compatible = "brcm,iproc-msi";
...@@ -203,6 +209,42 @@ enet: ethernet@61000000 { ...@@ -203,6 +209,42 @@ enet: ethernet@61000000 {
status = "disabled"; status = "disabled";
}; };
pdc0: iproc-pdc0@612c0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612c0000 0x445>; /* PDC FS0 regs */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
pdc1: iproc-pdc1@612e0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
pdc2: iproc-pdc2@61300000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61300000 0x445>; /* PDC FS2 regs */
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
pdc3: iproc-pdc3@61320000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61320000 0x445>; /* PDC FS3 regs */
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
dma0: dma@61360000 { dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell"; compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>; reg = <0x61360000 0x1000>;
...@@ -260,7 +302,7 @@ smmu: mmu@64000000 { ...@@ -260,7 +302,7 @@ smmu: mmu@64000000 {
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
mmu-masters; #iommu-cells = <1>;
}; };
pinctrl: pinctrl@6501d130 { pinctrl: pinctrl@6501d130 {
...@@ -577,5 +619,23 @@ nand: nand@66460000 { ...@@ -577,5 +619,23 @@ nand: nand@66460000 {
brcm,nand-has-wp; brcm,nand-has-wp;
}; };
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,
<0x664703a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs",
"intr_status_reg";
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "spi_l1_intr";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
}; };
}; };
arch/arm64/boot/dts/exynos/Makefile
View file @ 482c3e88
dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos5433-tm2.dtb \
exynos5433-tm2e.dtb \
exynos7-espresso.dtb
always := $(dtb-y) always := $(dtb-y)
subdir-y := $(dts-dirs) subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts 0 → 100644
View file @ 482c3e88
/*
* SAMSUNG Exynos5433 TM2E board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
* Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
* Samsung Exynos5433 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "exynos5433-tm2.dts"
/ {
model = "Samsung TM2E board";
compatible = "samsung,tm2e", "samsung,exynos5433";
};
&ldo23_reg {
regulator-name = "CAM_SEN_CORE_1.025V_AP";
regulator-max-microvolt = <1050000>;
};
&ldo25_reg {
regulator-name = "UNUSED_LDO25";
regulator-always-off;
};
&ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&ldo38_reg {
regulator-name = "VCC_3.3V_MOTOR_AP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi 0 → 100644
View file @ 482c3e88
/*
* Device tree sources for Exynos5433 TMU sensor configuration
*
* Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <23>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <75>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <150>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
samsung,tmu_mux_addr = <6>;
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi 0 → 100644
View file @ 482c3e88
/*
* Device tree sources for Exynos5433 TMU sensor configuration
*
* Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <75>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <150>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/exynos/exynos5433.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
View file @ 482c3e88
...@@ -20,8 +20,14 @@ gpa0: gpa0 { ...@@ -20,8 +20,14 @@ gpa0: gpa0 {
interrupt-controller; interrupt-controller;
interrupt-parent = <&gic>; interrupt-parent = <&gic>;
#interrupt-cells = <2>; #interrupt-cells = <2>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
}; };
gpa1: gpa1 { gpa1: gpa1 {
...@@ -31,8 +37,14 @@ gpa1: gpa1 { ...@@ -31,8 +37,14 @@ gpa1: gpa1 {
interrupt-controller; interrupt-controller;
interrupt-parent = <&gic>; interrupt-parent = <&gic>;
#interrupt-cells = <2>; #interrupt-cells = <2>;
interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
}; };
gpa2: gpa2 { gpa2: gpa2 {
......
arch/arm64/boot/dts/exynos/exynos7.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/freescale/Makefile
View file @ 482c3e88
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
......
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
View file @ 482c3e88
...@@ -45,7 +45,7 @@ ...@@ -45,7 +45,7 @@
*/ */
/dts-v1/; /dts-v1/;
/include/ "fsl-ls1043a.dtsi" #include "fsl-ls1043a.dtsi"
/ { / {
model = "LS1043A QDS Board"; model = "LS1043A QDS Board";
......
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
View file @ 482c3e88
...@@ -45,7 +45,7 @@ ...@@ -45,7 +45,7 @@
*/ */
/dts-v1/; /dts-v1/;
/include/ "fsl-ls1043a.dtsi" #include "fsl-ls1043a.dtsi"
/ { / {
model = "LS1043A RDB Board"; model = "LS1043A RDB Board";
......
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
View file @ 482c3e88
...@@ -46,7 +46,7 @@ ...@@ -46,7 +46,7 @@
/dts-v1/; /dts-v1/;
/include/ "fsl-ls2080a.dtsi" #include "fsl-ls2080a.dtsi"
/ { / {
model = "Freescale Layerscape 2080a QDS Board"; model = "Freescale Layerscape 2080a QDS Board";
......
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
View file @ 482c3e88
...@@ -46,7 +46,7 @@ ...@@ -46,7 +46,7 @@
/dts-v1/; /dts-v1/;
/include/ "fsl-ls2080a.dtsi" #include "fsl-ls2080a.dtsi"
/ { / {
model = "Freescale Layerscape 2080a RDB Board"; model = "Freescale Layerscape 2080a RDB Board";
......
arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
View file @ 482c3e88
...@@ -46,7 +46,7 @@ ...@@ -46,7 +46,7 @@
/dts-v1/; /dts-v1/;
/include/ "fsl-ls2080a.dtsi" #include "fsl-ls2080a.dtsi"
/ { / {
model = "Freescale Layerscape 2080a software Simulator model"; model = "Freescale Layerscape 2080a software Simulator model";
......
arch/arm64/boot/dts/hisilicon/Makefile
View file @ 482c3e88
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
always := $(dtb-y) always := $(dtb-y)
subdir-y := $(dts-dirs) subdir-y := $(dts-dirs)
......
arch/arm64/boot/dts/hisilicon/hip06-d03.dts
View file @ 482c3e88
...@@ -41,18 +41,10 @@ &eth3 { ...@@ -41,18 +41,10 @@ &eth3 {
status = "ok"; status = "ok";
}; };
&sas0 {
status = "ok";
};
&sas1 { &sas1 {
status = "ok"; status = "ok";
}; };
&sas2 {
status = "ok";
};
&usb_ohci { &usb_ohci {
status = "ok"; status = "ok";
}; };
......
arch/arm64/boot/dts/hisilicon/hip06.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/hisilicon/hip07-d05.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/hisilicon/hip07.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/marvell/Makefile
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/marvell/berlin4ct.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/nvidia/Makefile
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/nvidia/tegra186.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/Makefile
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8916.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8992.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8994.dtsi 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/msm8996.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/pm8916.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/qcom/pm8994.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/renesas/Makefile
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/renesas/r8a7795.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/renesas/r8a7796.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/rockchip/Makefile
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts 0 → 100644
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/rockchip/rk3368.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/rockchip/rk3399-evb.dts
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/rockchip/rk3399.dtsi
View file @ 482c3e88
This diff is collapsed.
arch/arm64/boot/dts/zte/zx296718.dtsi
View file @ 482c3e88
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7