arm64: dts: qcom: msm8996: switch USB QMP PHY to new style of bindings

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-10-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -779,7 +779,7 @@ gcc: clock-controller@300000 {
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
+				 <&usb3phy>,
 				 <&ufsphy_lane 0>,
 				 <&ufsphy_lane 1>,
 				 <&ufsphy_lane 2>;
@@ -3056,7 +3056,7 @@ usb3_dwc3: usb@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
@@ -3068,32 +3068,26 @@ usb3_dwc3: usb@6a00000 {
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
-
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {