Commit 489be59b authored by Luca Weiss's avatar Luca Weiss Committed by Bjorn Andersson

arm64: dts: qcom: sm6350: Add MPSS nodes

Add the required nodes for booting the MPSS on sm6350.
Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-4-luca.weiss@fairphone.com
parent f56498fc
...@@ -361,6 +361,32 @@ smem { ...@@ -361,6 +361,32 @@ smem {
hwlocks = <&tcsr_mutex 3>; hwlocks = <&tcsr_mutex 3>;
}; };
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_SMP2P
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_SMP2P>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 { soc: soc@0 {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
...@@ -473,6 +499,46 @@ tcsr_mutex: hwlock@1f40000 { ...@@ -473,6 +499,46 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>; #hwlock-cells = <1>;
}; };
mpss: remoteproc@4080000 {
compatible = "qcom,sm6350-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd SM6350_CX>,
<&rpmhpd SM6350_MSS>;
power-domain-names = "cx", "mss";
memory-region = <&pil_modem_mem>;
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
mboxes = <&ipcc IPCC_CLIENT_MPSS
IPCC_MPROC_SIGNAL_GLINK_QMP>;
label = "modem";
qcom,remote-pid = <1>;
};
};
sdhc_2: sdhci@8804000 { sdhc_2: sdhci@8804000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>; reg = <0 0x08804000 0 0x1000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment