Merge branch 'pdf_fixes_v1' of https://git.linuxtv.org/mchehab/experimental into mauro

Bring in a set of post-thrashup fixes from Mauro.

Documentation/PCI/pci-error-recovery.rst

@@ -403,7 +403,7 @@ That is, the recovery API only requires that:
 .. note::
 
    Implementation details for the powerpc platform are discussed in
-   the file Documentation/powerpc/eeh-pci-error-recovery.txt
+   the file Documentation/powerpc/eeh-pci-error-recovery.rst
 
    As of this writing, there is a growing list of device drivers with
    patches implementing error recovery. Not all of these patches are in
@@ -422,3 +422,6 @@ That is, the recovery API only requires that:
    - drivers/net/cxgb3
    - drivers/net/s2io.c
    - drivers/net/qlge
+
+The End
+-------

Documentation/RCU/rculist_nulls.txt

 Using hlist_nulls to protect read-mostly linked lists and
 objects using SLAB_TYPESAFE_BY_RCU allocations.
 
-Please read the basics in Documentation/RCU/listRCU.txt
+Please read the basics in Documentation/RCU/listRCU.rst
 
 Using special makers (called 'nulls') is a convenient way
 to solve following problem :

Documentation/admin-guide/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel User Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'linux-user.tex', 'Linux Kernel User Documentation',
-     'The kernel development community', 'manual'),
-]

Documentation/conf.py

@@ -16,6 +16,8 @@ import sys
 import os
 import sphinx
 
+from subprocess import check_output
+
 # Get Sphinx version
 major, minor, patch = sphinx.version_info[:3]
 
@@ -276,10 +278,21 @@ latex_elements = {
         \\setsansfont{DejaVu Sans}
         \\setromanfont{DejaVu Serif}
         \\setmonofont{DejaVu Sans Mono}
-
      '''
 }
 
+# At least one book (translations) may have Asian characters
+# with are only displayed if xeCJK is used
+
+cjk_cmd = check_output(['fc-list', '--format="%{family[0]}\n"']).decode('utf-8', 'ignore')
+if cjk_cmd.find("Noto Sans CJK SC") >= 0:
+    print ("enabling CJK for LaTeX builder")
+    latex_elements['preamble']  += '''
+	% This is needed for translations
+        \\usepackage{xeCJK}
+        \\setCJKmainfont{Noto Sans CJK SC}
+     '''
+
 # Fix reference escape troubles with Sphinx 1.4.x
 if major == 1 and minor > 3:
     latex_elements['preamble']  += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
@@ -410,6 +423,21 @@ latex_documents = [
      'The kernel development community', 'manual'),
 ]
 
+# Add all other index files from Documentation/ subdirectories
+for fn in os.listdir('.'):
+    doc = os.path.join(fn, "index")
+    if os.path.exists(doc + ".rst"):
+        has = False
+        for l in latex_documents:
+            if l[0] == doc:
+                has = True
+                break
+        if not has:
+            latex_documents.append((doc, fn + '.tex',
+                                    'Linux %s Documentation' % fn.capitalize(),
+                                    'The kernel development community',
+                                    'manual'))
+
 # The name of an image file (relative to this directory) to place at the top of
 # the title page.
 #latex_logo = None

Documentation/core-api/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Core-API Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'core-api.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/crypto/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Crypto API'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'crypto-api.tex', 'Linux Kernel Crypto API manual',
-     'The kernel development community', 'manual'),
-]

Documentation/dev-tools/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Development tools for the kernel"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'dev-tools.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/devicetree/bindings/arm/idle-states.txt

@@ -703,4 +703,4 @@ cpus {
     https://www.devicetree.org/specifications/
 
 [6] ARM Linux Kernel documentation - Booting AArch64 Linux
-    Documentation/arm64/booting.txt
+    Documentation/arm64/booting.rst

Documentation/doc-guide/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Documentation Guide'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'kernel-doc-guide.tex', 'Linux Kernel Documentation Guide',
-     'The kernel development community', 'manual'),
-]

Documentation/driver-api/80211/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux 802.11 Driver Developer's Guide"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', '80211.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/driver-api/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "The Linux driver implementer's API guide"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'driver-api.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/driver-api/pm/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Device Power Management"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'pm.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/filesystems/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Filesystems API"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'filesystems.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/gpu/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux GPU Driver Developer's Guide"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'gpu.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/index.rst

@@ -111,9 +111,11 @@ needed).
    netlabel/index
    networking/index
    pcmcia/index
+   power/index
    target/index
    timers/index
    watchdog/index
+   virtual/index
    input/index
    hwmon/index
    gpu/index
@@ -143,6 +145,7 @@ implementation.
    arm64/index
    ia64/index
    m68k/index
+   powerpc/index
    riscv/index
    s390/index
    sh/index

Documentation/input/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "The Linux input driver subsystem"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'linux-input.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/kernel-hacking/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Kernel Hacking Guides"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'kernel-hacking.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/locking/spinlocks.rst

@@ -82,7 +82,7 @@ itself.  The read lock allows many concurrent readers.  Anything that
 **changes** the list will have to get the write lock.
 
    NOTE! RCU is better for list traversal, but requires careful
-   attention to design detail (see Documentation/RCU/listRCU.txt).
+   attention to design detail (see Documentation/RCU/listRCU.rst).
 
 Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
 time need to do any changes (even if you don't do it every time), you have
@@ -90,7 +90,7 @@ to get the write-lock at the very beginning.
 
    NOTE! We are working hard to remove reader-writer spinlocks in most
    cases, so please don't add a new one without consensus.  (Instead, see
-   Documentation/RCU/rcu.txt for complete information.)
+   Documentation/RCU/rcu.rst for complete information.)
 
 ----
 

Documentation/maintainer/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Development Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'maintainer.tex', 'Linux Kernel Development Documentation',
-     'The kernel development community', 'manual'),
-]

Documentation/media/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-# SPDX-License-Identifier: GPL-2.0
-
-project = 'Linux Media Subsystem Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'media.tex', 'Linux Media Subsystem Documentation',
-     'The kernel development community', 'manual'),
-]

Documentation/memory-barriers.txt

@@ -548,7 +548,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
 
 	[*] For information on bus mastering DMA and coherency please read:
 
-	    Documentation/PCI/pci.rst
+	    Documentation/driver-api/pci/pci.rst
 	    Documentation/DMA-API-HOWTO.txt
 	    Documentation/DMA-API.txt
 

Documentation/networking/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Networking Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'networking.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/power/index.rst

-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 ================
 Power Management

Documentation/powerpc/bootwrapper.txt → Documentation/powerpc/bootwrapper.rst

+========================
 The PowerPC boot wrapper
-------------------------
+========================
+
 Copyright (C) Secret Lab Technologies Ltd.
 
 PowerPC image targets compresses and wraps the kernel image (vmlinux) with
@@ -21,6 +23,7 @@ it uses the wrapper script (arch/powerpc/boot/wrapper) to generate target
 image.  The details of the build system is discussed in the next section.
 Currently, the following image format targets exist:
 
+   ==================== ========================================================
    cuImage.%:		Backwards compatible uImage for older version of
 			U-Boot (for versions that don't understand the device
 			tree).  This image embeds a device tree blob inside
@@ -29,31 +32,36 @@ Currently, the following image format targets exist:
 			with boot wrapper code that extracts data from the old
 			bd_info structure and loads the data into the device
 			tree before jumping into the kernel.
-			  Because of the series of #ifdefs found in the
+
+			Because of the series of #ifdefs found in the
 			bd_info structure used in the old U-Boot interfaces,
 			cuImages are platform specific.  Each specific
 			U-Boot platform has a different platform init file
 			which populates the embedded device tree with data
 			from the platform specific bd_info file.  The platform
 			specific cuImage platform init code can be found in
-			arch/powerpc/boot/cuboot.*.c.  Selection of the correct
+			`arch/powerpc/boot/cuboot.*.c`. Selection of the correct
 			cuImage init code for a specific board can be found in
 			the wrapper structure.
+
    dtbImage.%:		Similar to zImage, except device tree blob is embedded
 			inside the image instead of provided by firmware.  The
 			output image file can be either an elf file or a flat
 			binary depending on the platform.
-			  dtbImages are used on systems which do not have an
+
+			dtbImages are used on systems which do not have an
 			interface for passing a device tree directly.
 			dtbImages are similar to simpleImages except that
 			dtbImages have platform specific code for extracting
 			data from the board firmware, but simpleImages do not
 			talk to the firmware at all.
-			  PlayStation 3 support uses dtbImage.  So do Embedded
+
+			PlayStation 3 support uses dtbImage.  So do Embedded
 			Planet boards using the PlanetCore firmware.  Board
 			specific initialization code is typically found in a
 			file named arch/powerpc/boot/<platform>.c; but this
 			can be overridden by the wrapper script.
+
    simpleImage.%:	Firmware independent compressed image that does not
 			depend on any particular firmware interface and embeds
 			a device tree blob.  This image is a flat binary that
@@ -61,14 +69,16 @@ Currently, the following image format targets exist:
 			Firmware cannot pass any configuration data to the
 			kernel with this image type and it depends entirely on
 			the embedded device tree for all information.
-			  The simpleImage is useful for booting systems with
+
+			The simpleImage is useful for booting systems with
 			an unknown firmware interface or for booting from
 			a debugger when no firmware is present (such as on
 			the Xilinx Virtex platform).  The only assumption that
 			simpleImage makes is that RAM is correctly initialized
 			and that the MMU is either off or has RAM mapped to
 			base address 0.
-			  simpleImage also supports inserting special platform
+
+			simpleImage also supports inserting special platform
 			specific initialization code to the start of the bootup
 			sequence.  The virtex405 platform uses this feature to
 			ensure that the cache is invalidated before caching
@@ -81,9 +91,11 @@ Currently, the following image format targets exist:
 			named (virtex405-<board>.dts).  Search the wrapper
 			script for 'virtex405' and see the file
 			arch/powerpc/boot/virtex405-head.S for details.
+
    treeImage.%;		Image format for used with OpenBIOS firmware found
 			on some ppc4xx hardware.  This image embeds a device
 			tree blob inside the image.
+
    uImage:		Native image format used by U-Boot.  The uImage target
 			does not add any boot code.  It just wraps a compressed
 			vmlinux in the uImage data structure.  This image
@@ -91,12 +103,14 @@ Currently, the following image format targets exist:
 			a device tree to the kernel at boot.  If using an older
 			version of U-Boot, then you need to use a cuImage
 			instead.
+
    zImage.%:		Image format which does not embed a device tree.
 			Used by OpenFirmware and other firmware interfaces
 			which are able to supply a device tree.  This image
 			expects firmware to provide the device tree at boot.
 			Typically, if you have general purpose PowerPC
 			hardware then you want this image format.
+   ==================== ========================================================
 
 Image types which embed a device tree blob (simpleImage, dtbImage, treeImage,
 and cuImage) all generate the device tree blob from a file in the

Documentation/powerpc/cpu_families.txt → Documentation/powerpc/cpu_families.rst

+============
 CPU Families
 ============
 
@@ -8,8 +9,8 @@ and are supported by arch/powerpc.
 Book3S (aka sPAPR)
 ------------------
 
- - Hash MMU
- - Mix of 32 & 64 bit
+- Hash MMU
+- Mix of 32 & 64 bit::
 
    +--------------+                 +----------------+
    |  Old POWER   | --------------> | RS64 (threads) |
@@ -108,8 +109,8 @@ Book3S (aka sPAPR)
 IBM BookE
 ---------
 
- - Software loaded TLB.
- - All 32 bit
+- Software loaded TLB.
+- All 32 bit::
 
    +--------------+
    |     401      |
@@ -155,8 +156,8 @@ IBM BookE
 Motorola/Freescale 8xx
 ----------------------
 
- - Software loaded with hardware assist.
- - All 32 bit
+- Software loaded with hardware assist.
+- All 32 bit::
 
    +-------------+
    | MPC8xx Core |
@@ -166,9 +167,9 @@ Motorola/Freescale 8xx
 Freescale BookE
 ---------------
 
- - Software loaded TLB.
- - e6500 adds HW loaded indirect TLB entries.
- - Mix of 32 & 64 bit
+- Software loaded TLB.
+- e6500 adds HW loaded indirect TLB entries.
+- Mix of 32 & 64 bit::
 
    +--------------+
    |     e200     |
@@ -207,8 +208,8 @@ Freescale BookE
 IBM A2 core
 -----------
 
- - Book3E, software loaded TLB + HW loaded indirect TLB entries.
- - 64 bit
+- Book3E, software loaded TLB + HW loaded indirect TLB entries.
+- 64 bit::
 
    +--------------+     +----------------+
    |   A2 core    | --> |      WSP       |

Documentation/powerpc/cpu_features.txt → Documentation/powerpc/cpu_features.rst

+============
+CPU Features
+============
+
 Hollis Blanchard <hollis@austin.ibm.com>
 5 Jun 2002
 
@@ -32,7 +36,7 @@ anyways).
 After detecting the processor type, the kernel patches out sections of code
 that shouldn't be used by writing nop's over it. Using cpufeatures requires
 just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
-transfer_to_handler:
+transfer_to_handler::
 
 	#ifdef CONFIG_ALTIVEC
 	BEGIN_FTR_SECTION

Documentation/powerpc/cxl.txt → Documentation/powerpc/cxl.rst

+====================================
 Coherent Accelerator Interface (CXL)
 ====================================
 
@@ -21,6 +22,8 @@ Introduction
 Hardware overview
 =================
 
+    ::
+
          POWER8/9             FPGA
        +----------+        +---------+
        |          |        |         |
@@ -59,14 +62,16 @@ Hardware overview
     the fault. The context to which this fault is serviced is based on
     who owns that acceleration function.
 
-    POWER8 <-----> PSL Version 8 is compliant to the CAIA Version 1.0.
-    POWER9 <-----> PSL Version 9 is compliant to the CAIA Version 2.0.
+    - POWER8 and PSL Version 8 are compliant to the CAIA Version 1.0.
+    - POWER9 and PSL Version 9 are compliant to the CAIA Version 2.0.
+
     This PSL Version 9 provides new features such as:
+
     * Interaction with the nest MMU on the P9 chip.
     * Native DMA support.
     * Supports sending ASB_Notify messages for host thread wakeup.
     * Supports Atomic operations.
-    * ....
+    * etc.
 
     Cards with a PSL9 won't work on a POWER8 system and cards with a
     PSL8 won't work on a POWER9 system.
@@ -147,7 +152,9 @@ User API
     master devices.
 
     A userspace library libcxl is available here:
+
 	https://github.com/ibm-capi/libcxl
+
     This provides a C interface to this kernel API.
 
 open
@@ -165,7 +172,8 @@ open
     When all available contexts are allocated the open call will fail
     and return -ENOSPC.
 
-    Note: IRQs need to be allocated for each context, which may limit
+    Note:
+	  IRQs need to be allocated for each context, which may limit
           the number of contexts that can be created, and therefore
           how many times the device can be opened. The POWER8 CAPP
           supports 2040 IRQs and 3 are used by the kernel, so 2037 are
@@ -186,7 +194,9 @@ ioctl
         updated as userspace allocates and frees memory. This ioctl
         returns once the AFU context is started.
 
-        Takes a pointer to a struct cxl_ioctl_start_work:
+        Takes a pointer to a struct cxl_ioctl_start_work
+
+            ::
 
                 struct cxl_ioctl_start_work {
                         __u64 flags;
@@ -269,7 +279,7 @@ read
     The buffer passed to read() must be at least 4K bytes.
 
     The result of the read will be a buffer of one or more events,
-    each event is of type struct cxl_event, of varying size.
+    each event is of type struct cxl_event, of varying size::
 
             struct cxl_event {
                     struct cxl_event_header header;
@@ -280,7 +290,9 @@ read
                     };
             };
 
-    The struct cxl_event_header is defined as:
+    The struct cxl_event_header is defined as
+
+        ::
 
             struct cxl_event_header {
                     __u16 type;
@@ -307,7 +319,9 @@ read
             For future extensions and padding.
 
     If the event type is CXL_EVENT_AFU_INTERRUPT then the event
-    structure is defined as:
+    structure is defined as
+
+        ::
 
             struct cxl_event_afu_interrupt {
                     __u16 flags;
@@ -326,7 +340,9 @@ read
             For future extensions and padding.
 
     If the event type is CXL_EVENT_DATA_STORAGE then the event
-    structure is defined as:
+    structure is defined as
+
+        ::
 
             struct cxl_event_data_storage {
                     __u16 flags;
@@ -356,7 +372,9 @@ read
             For future extensions
 
     If the event type is CXL_EVENT_AFU_ERROR then the event structure
-    is defined as:
+    is defined as
+
+        ::
 
             struct cxl_event_afu_error {
                     __u16 flags;
@@ -393,15 +411,15 @@ open
 ioctl
 -----
 
-CXL_IOCTL_DOWNLOAD_IMAGE:
-CXL_IOCTL_VALIDATE_IMAGE:
+CXL_IOCTL_DOWNLOAD_IMAGE / CXL_IOCTL_VALIDATE_IMAGE:
     Starts and controls flashing a new FPGA image. Partial
     reconfiguration is not supported (yet), so the image must contain
     a copy of the PSL and AFU(s). Since an image can be quite large,
     the caller may have to iterate, splitting the image in smaller
     chunks.
 
-    Takes a pointer to a struct cxl_adapter_image:
+    Takes a pointer to a struct cxl_adapter_image::
+
         struct cxl_adapter_image {
             __u64 flags;
             __u64 data;
@@ -442,7 +460,7 @@ Udev rules
     The following udev rules could be used to create a symlink to the
     most logical chardev to use in any programming mode (afuX.Yd for
     dedicated, afuX.Ys for afu directed), since the API is virtually
-    identical for each:
+    identical for each::
 
 	SUBSYSTEM=="cxl", ATTRS{mode}=="dedicated_process", SYMLINK="cxl/%b"
 	SUBSYSTEM=="cxl", ATTRS{mode}=="afu_directed", \

Documentation/powerpc/cxlflash.txt → Documentation/powerpc/cxlflash.rst

+================================
+Coherent Accelerator (CXL) Flash
+================================
+
 Introduction
 ============
 
@@ -28,7 +32,7 @@ Introduction
     responsible for the initialization of the adapter, setting up the
     special path for user space access, and performing error recovery. It
     communicates directly the Flash Accelerator Functional Unit (AFU)
-    as described in Documentation/powerpc/cxl.txt.
+    as described in Documentation/powerpc/cxl.rst.
 
     The cxlflash driver supports two, mutually exclusive, modes of
     operation at the device (LUN) level:
@@ -58,7 +62,7 @@ Overview
 
     The CXL Flash Adapter Driver establishes a master context with the
     AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
-    Adapter Problem Space Memory Map looks like this:
+    Adapter Problem Space Memory Map looks like this::
 
                      +-------------------------------+
                      |    512 * 64 KB User MMIO      |
@@ -375,7 +379,7 @@ CXL Flash Driver Host IOCTLs
     Each host adapter instance that is supported by the cxlflash driver
     has a special character device associated with it to enable a set of
     host management function. These character devices are hosted in a
-    class dedicated for cxlflash and can be accessed via /dev/cxlflash/*.
+    class dedicated for cxlflash and can be accessed via `/dev/cxlflash/*`.
 
     Applications can be written to perform various functions using the
     host ioctl APIs below.

Documentation/powerpc/DAWR-POWER9.txt → Documentation/powerpc/dawr-power9.rst

+=====================
 DAWR issues on POWER9
-============================
+=====================
 
 On POWER9 the Data Address Watchpoint Register (DAWR) can cause a checkstop
 if it points to cache inhibited (CI) memory. Currently Linux has no way to
 disinguish CI memory when configuring the DAWR, so (for now) the DAWR is
-disabled by this commit:
+disabled by this commit::
 
     commit 9654153158d3e0684a1bdb76dbababdb7111d5a0
     Author: Michael Neuling <mikey@neuling.org>
@@ -12,7 +13,7 @@ disabled by this commit:
     powerpc: Disable DAWR in the base POWER9 CPU features
 
 Technical Details:
-============================
+==================
 
 DAWR has 6 different ways of being set.
 1) ptrace
@@ -37,7 +38,7 @@ DAWR on the migration.
 For xmon, the 'bd' command will return an error on P9.
 
 Consequences for users
-============================
+======================
 
 For GDB watchpoints (ie 'watch' command) on POWER9 bare metal , GDB
 will accept the command. Unfortunately since there is no hardware
@@ -57,8 +58,8 @@ trapped in GDB. The watchpoint is remembered, so if the guest is
 migrated back to the POWER8 host, it will start working again.
 
 Force enabling the DAWR
-=============================
-Kernels (since ~v5.2) have an option to force enable the DAWR via:
+=======================
+Kernels (since ~v5.2) have an option to force enable the DAWR via::
 
   echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous
 
@@ -86,5 +87,7 @@ dawr_enable_dangerous file will fail if the hypervisor doesn't support
 writing the DAWR.
 
 To double check the DAWR is working, run this kernel selftest:
+
   tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
+
 Any errors/failures/skips mean something is wrong.

Documentation/powerpc/dscr.txt → Documentation/powerpc/dscr.rst

-			DSCR (Data Stream Control Register)
-		================================================
+===================================
+DSCR (Data Stream Control Register)
+===================================
 
 DSCR register in powerpc allows user to have some control of prefetch of data
 stream in the processor. Please refer to the ISA documents or related manual
@@ -10,14 +11,17 @@ user interface.
 
 (A) Data Structures:
 
-	(1) thread_struct:
+	(1) thread_struct::
+
 		dscr		/* Thread DSCR value */
 		dscr_inherit	/* Thread has changed default DSCR */
 
-	(2) PACA:
+	(2) PACA::
+
 		dscr_default	/* per-CPU DSCR default value */
 
-	(3) sysfs.c:
+	(3) sysfs.c::
+
 		dscr_default	/* System DSCR default value */
 
 (B) Scheduler Changes:
@@ -35,8 +39,8 @@ user interface.
 
 (C) SYSFS Interface:
 
-	Global DSCR default:		/sys/devices/system/cpu/dscr_default
-	CPU specific DSCR default:	/sys/devices/system/cpu/cpuN/dscr
+	- Global DSCR default:		/sys/devices/system/cpu/dscr_default
+	- CPU specific DSCR default:	/sys/devices/system/cpu/cpuN/dscr
 
 	Changing the global DSCR default in the sysfs will change all the CPU
 	specific DSCR defaults immediately in their PACA structures. Again if

Documentation/powerpc/eeh-pci-error-recovery.txt → Documentation/powerpc/eeh-pci-error-recovery.rst

+==========================
+PCI Bus EEH Error Recovery
+==========================
 
+Linas Vepstas <linas@austin.ibm.com>
 
-                      PCI Bus EEH Error Recovery
-                      --------------------------
-                           Linas Vepstas
-                       <linas@austin.ibm.com>
-                          12 January 2005
+12 January 2005
 
 
 Overview:
@@ -143,17 +143,17 @@ seen in /proc/ppc64/eeh (subject to change).  Normally, almost
 all of these occur during boot, when the PCI bus is scanned, where
 a large number of 0xff reads are part of the bus scan procedure.
 
-If a frozen slot is detected, code in 
-arch/powerpc/platforms/pseries/eeh.c will print a stack trace to 
-syslog (/var/log/messages).  This stack trace has proven to be very 
-useful to device-driver authors for finding out at what point the EEH 
-error was detected, as the error itself usually occurs slightly 
+If a frozen slot is detected, code in
+arch/powerpc/platforms/pseries/eeh.c will print a stack trace to
+syslog (/var/log/messages).  This stack trace has proven to be very
+useful to device-driver authors for finding out at what point the EEH
+error was detected, as the error itself usually occurs slightly
 beforehand.
 
 Next, it uses the Linux kernel notifier chain/work queue mechanism to
 allow any interested parties to find out about the failure.  Device
 drivers, or other parts of the kernel, can use
-eeh_register_notifier(struct notifier_block *) to find out about EEH
+`eeh_register_notifier(struct notifier_block *)` to find out about EEH
 events.  The event will include a pointer to the pci device, the
 device node and some state info.  Receivers of the event can "do as
 they wish"; the default handler will be described further in this
@@ -162,10 +162,13 @@ section.
 To assist in the recovery of the device, eeh.c exports the
 following functions:
 
-rtas_set_slot_reset() -- assert the  PCI #RST line for 1/8th of a second
-rtas_configure_bridge() -- ask firmware to configure any PCI bridges
+rtas_set_slot_reset()
+   assert the  PCI #RST line for 1/8th of a second
+rtas_configure_bridge()
+   ask firmware to configure any PCI bridges
    located topologically under the pci slot.
-eeh_save_bars() and eeh_restore_bars(): save and restore the PCI
+eeh_save_bars() and eeh_restore_bars():
+   save and restore the PCI
    config-space info for a device and any devices under it.
 
 
@@ -191,7 +194,7 @@ events get delivered to user-space scripts.
 
 Following is an example sequence of events that cause a device driver
 close function to be called during the first phase of an EEH reset.
-The following sequence is an example of the pcnet32 device driver.
+The following sequence is an example of the pcnet32 device driver::
 
     rpa_php_unconfig_pci_adapter (struct slot *)  // in rpaphp_pci.c
     {
@@ -241,53 +244,54 @@ The following sequence is an example of the pcnet32 device driver.
      }}}}}}
 
 
-    in drivers/pci/pci_driver.c,
-    struct device_driver->remove() is just pci_device_remove()
-    which calls struct pci_driver->remove() which is pcnet32_remove_one()
-    which calls unregister_netdev()  (in net/core/dev.c)
-    which calls dev_close()  (in net/core/dev.c)
-    which calls dev->stop() which is pcnet32_close()
-    which then does the appropriate shutdown.
+in drivers/pci/pci_driver.c,
+struct device_driver->remove() is just pci_device_remove()
+which calls struct pci_driver->remove() which is pcnet32_remove_one()
+which calls unregister_netdev()  (in net/core/dev.c)
+which calls dev_close()  (in net/core/dev.c)
+which calls dev->stop() which is pcnet32_close()
+which then does the appropriate shutdown.
 
 ---
+
 Following is the analogous stack trace for events sent to user-space
-when the pci device is unconfigured.
+when the pci device is unconfigured::
 
-rpa_php_unconfig_pci_adapter() {             // in rpaphp_pci.c
-  calls
-  pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
+  rpa_php_unconfig_pci_adapter() {             // in rpaphp_pci.c
     calls
-    pci_destroy_dev (struct pci_dev *) {
+    pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
       calls
-      device_unregister (&dev->dev) {        // in /drivers/base/core.c
+      pci_destroy_dev (struct pci_dev *) {
         calls
-        device_del(struct device * dev) {    // in /drivers/base/core.c
+        device_unregister (&dev->dev) {        // in /drivers/base/core.c
           calls
-          kobject_del() {                    //in /libs/kobject.c
+          device_del(struct device * dev) {    // in /drivers/base/core.c
             calls
-            kobject_uevent() {               // in /libs/kobject.c
+            kobject_del() {                    //in /libs/kobject.c
               calls
-              kset_uevent() {                // in /lib/kobject.c
+              kobject_uevent() {               // in /libs/kobject.c
                 calls
-                kset->uevent_ops->uevent()   // which is really just
-                a call to
-                dev_uevent() {               // in /drivers/base/core.c
+                kset_uevent() {                // in /lib/kobject.c
                   calls
-                  dev->bus->uevent() which is really just a call to
-                  pci_uevent () {            // in drivers/pci/hotplug.c
-                    which prints device name, etc....
+                  kset->uevent_ops->uevent()   // which is really just
+                  a call to
+                  dev_uevent() {               // in /drivers/base/core.c
+                    calls
+                    dev->bus->uevent() which is really just a call to
+                    pci_uevent () {            // in drivers/pci/hotplug.c
+                      which prints device name, etc....
+                   }
                  }
-               }
-               then kobject_uevent() sends a netlink uevent to userspace
-               --> userspace uevent
-               (during early boot, nobody listens to netlink events and
-               kobject_uevent() executes uevent_helper[], which runs the
-               event process /sbin/hotplug)
+                 then kobject_uevent() sends a netlink uevent to userspace
+                 --> userspace uevent
+                 (during early boot, nobody listens to netlink events and
+                 kobject_uevent() executes uevent_helper[], which runs the
+                 event process /sbin/hotplug)
+             }
            }
-         }
-         kobject_del() then calls sysfs_remove_dir(), which would
-         trigger any user-space daemon that was watching /sysfs,
-         and notice the delete event.
+           kobject_del() then calls sysfs_remove_dir(), which would
+           trigger any user-space daemon that was watching /sysfs,
+           and notice the delete event.
 
 
 Pro's and Con's of the Current Design
@@ -299,12 +303,12 @@ individual device drivers, so that the current design throws a wide net.
 The biggest negative of the design is that it potentially disturbs
 network daemons and file systems that didn't need to be disturbed.
 
--- A minor complaint is that resetting the network card causes
+-  A minor complaint is that resetting the network card causes
    user-space back-to-back ifdown/ifup burps that potentially disturb
    network daemons, that didn't need to even know that the pci
    card was being rebooted.
 
--- A more serious concern is that the same reset, for SCSI devices,
+-  A more serious concern is that the same reset, for SCSI devices,
    causes havoc to mounted file systems.  Scripts cannot post-facto
    unmount a file system without flushing pending buffers, but this
    is impossible, because I/O has already been stopped.  Thus,
@@ -322,7 +326,7 @@ network daemons and file systems that didn't need to be disturbed.
    from the block layer.  It would be very natural to add an EEH
    reset into this chain of events.
 
--- If a SCSI error occurs for the root device, all is lost unless
+-  If a SCSI error occurs for the root device, all is lost unless
    the sysadmin had the foresight to run /bin, /sbin, /etc, /var
    and so on, out of ramdisk/tmpfs.
 
@@ -330,5 +334,3 @@ network daemons and file systems that didn't need to be disturbed.
 Conclusions
 -----------
 There's forward progress ...
-
-

Documentation/powerpc/index.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+powerpc
+=======
+
+.. toctree::
+    :maxdepth: 1
+
+    bootwrapper
+    cpu_families
+    cpu_features
+    cxl
+    cxlflash
+    dawr-power9
+    dscr
+    eeh-pci-error-recovery
+    firmware-assisted-dump
+    hvcs
+    isa-versions
+    mpc52xx
+    pci_iov_resource_on_powernv
+    pmu-ebb
+    ptrace
+    qe_firmware
+    syscall64-abi
+    transactional_memory
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/powerpc/isa-versions.rst

-:orphan:
-
+==========================
 CPU to ISA Version Mapping
 ==========================
 
 Mapping of some CPU versions to relevant ISA versions.
 
-========= ====================
+========= ====================================================================
 CPU       Architecture version
-========= ====================
+========= ====================================================================
 Power9    Power ISA v3.0B
 Power8    Power ISA v2.07
 Power7    Power ISA v2.06
@@ -24,7 +23,7 @@ PPC970    - PowerPC User Instruction Set Architecture Book I v2.01
           - PowerPC Virtual Environment Architecture Book II v2.01
           - PowerPC Operating Environment Architecture Book III v2.01
           - Plus Altivec/VMX ~= 2.03
-========= ====================
+========= ====================================================================
 
 
 Key Features
@@ -60,9 +59,9 @@ Power5     No
 PPC970     No
 ========== ====
 
-========== ====================
+========== ====================================
 CPU        Transactional Memory
-========== ====================
+========== ====================================
 Power9     Yes (* see transactional_memory.txt)
 Power8     Yes
 Power7     No
@@ -73,4 +72,4 @@ Power5++   No
 Power5+    No
 Power5     No
 PPC970     No
-========== ====================
+========== ====================================

Documentation/powerpc/mpc52xx.txt → Documentation/powerpc/mpc52xx.rst

+=============================
 Linux 2.6.x on MPC52xx family
------------------------------
+=============================
 
 For the latest info, go to http://www.246tNt.com/mpc52xx/
 
 To compile/use :
 
-  - U-Boot:
+  - U-Boot::
+
      # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
         if you wish to ).
      # make lite5200_defconfig
@@ -16,7 +18,8 @@ To compile/use :
      => tftpboot 400000 pRamdisk
      => bootm 200000 400000
 
-  - DBug:
+  - DBug::
+
      # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
         if you wish to ).
      # make lite5200_defconfig
@@ -28,7 +31,8 @@ To compile/use :
      DBug> dn -i zImage.initrd.lite5200
 
 
-Some remarks :
+Some remarks:
+
  - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
    is not supported, and I'm not sure anyone is interesting in working on it
    so. I didn't took 5xxx because there's apparently a lot of 5xxx that have

Documentation/powerpc/pci_iov_resource_on_powernv.txt → Documentation/powerpc/pci_iov_resource_on_powernv.rst

+===================================================
+PCI Express I/O Virtualization Resource on Powerenv
+===================================================
+
 Wei Yang <weiyang@linux.vnet.ibm.com>
+
 Benjamin Herrenschmidt <benh@au1.ibm.com>
+
 Bjorn Helgaas <bhelgaas@google.com>
+
 26 Aug 2014
 
 This document describes the requirement from hardware for PCI MMIO resource
@@ -10,6 +17,7 @@ Endpoints and the implementation on P8 (IODA2). The next two sections talks
 about considerations on enabling SRIOV on IODA2.
 
 1. Introduction to Partitionable Endpoints
+==========================================
 
 A Partitionable Endpoint (PE) is a way to group the various resources
 associated with a device or a set of devices to provide isolation between
@@ -35,6 +43,7 @@ is a completely separate HW entity that replicates the entire logic, so has
 its own set of PEs, etc.
 
 2. Implementation of Partitionable Endpoints on P8 (IODA2)
+==========================================================
 
 P8 supports up to 256 Partitionable Endpoints per PHB.
 
@@ -149,6 +158,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
     sense, but we haven't done it yet.
 
 3. Considerations for SR-IOV on PowerKVM
+========================================
 
   * SR-IOV Background
 
@@ -224,7 +234,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
   IODA supports 256 PEs, so segmented windows contain 256 segments, so if
   total_VFs is less than 256, we have the situation in Figure 1.0, where
   segments [total_VFs, 255] of the M64 window may map to some MMIO range on
-  other devices:
+  other devices::
 
      0      1                     total_VFs - 1
      +------+------+-     -+------+------+
@@ -243,7 +253,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
 		Figure 1.0 Direct map VF(n) BAR space
 
   Our current solution is to allocate 256 segments even if the VF(n) BAR
-  space doesn't need that much, as shown in Figure 1.1:
+  space doesn't need that much, as shown in Figure 1.1::
 
      0      1                     total_VFs - 1                255
      +------+------+-     -+------+------+-      -+------+------+
@@ -269,6 +279,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
   responds to segments [total_VFs, 255].
 
 4. Implications for the Generic PCI Code
+========================================
 
 The PCIe SR-IOV spec requires that the base of the VF(n) BAR space be
 aligned to the size of an individual VF BAR.

Documentation/powerpc/pmu-ebb.txt → Documentation/powerpc/pmu-ebb.rst

+========================
 PMU Event Based Branches
 ========================
 

Documentation/powerpc/ptrace.txt → Documentation/powerpc/ptrace.rst

+======
+Ptrace
+======
+
 GDB intends to support the following hardware debug features of BookE
 processors:
 
@@ -12,6 +16,7 @@ that GDB doesn't need to special-case each of them. We added the
 following 3 new ptrace requests.
 
 1. PTRACE_PPC_GETHWDEBUGINFO
+============================
 
 Query for GDB to discover the hardware debug features. The main info to
 be returned here is the minimum alignment for the hardware watchpoints.
@@ -22,9 +27,9 @@ adding special cases to GDB based on what it sees in AUXV.
 Since we're at it, we added other useful info that the kernel can return to
 GDB: this query will return the number of hardware breakpoints, hardware
 watchpoints and whether it supports a range of addresses and a condition.
-The query will fill the following structure provided by the requesting process:
+The query will fill the following structure provided by the requesting process::
 
-struct ppc_debug_info {
+  struct ppc_debug_info {
        unit32_t version;
        unit32_t num_instruction_bps;
        unit32_t num_data_bps;
@@ -32,46 +37,46 @@ struct ppc_debug_info {
        unit32_t data_bp_alignment;
        unit32_t sizeof_condition; /* size of the DVC register */
        uint64_t features; /* bitmask of the individual flags */
-};
+  };
 
-features will have bits indicating whether there is support for:
+features will have bits indicating whether there is support for::
 
-#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
-#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
-#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
-#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
-#define PPC_DEBUG_FEATURE_DATA_BP_DAWR		0x10
+  #define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
+  #define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
+  #define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
+  #define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
+  #define PPC_DEBUG_FEATURE_DATA_BP_DAWR		0x10
 
 2. PTRACE_SETHWDEBUG
 
-Sets a hardware breakpoint or watchpoint, according to the provided structure:
+Sets a hardware breakpoint or watchpoint, according to the provided structure::
 
-struct ppc_hw_breakpoint {
+  struct ppc_hw_breakpoint {
         uint32_t version;
-#define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
-#define PPC_BREAKPOINT_TRIGGER_READ     0x2
-#define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
+  #define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
+  #define PPC_BREAKPOINT_TRIGGER_READ     0x2
+ #define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
         uint32_t trigger_type;       /* only some combinations allowed */
-#define PPC_BREAKPOINT_MODE_EXACT               0x0
-#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
-#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
-#define PPC_BREAKPOINT_MODE_MASK                0x3
+  #define PPC_BREAKPOINT_MODE_EXACT               0x0
+  #define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
+  #define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
+  #define PPC_BREAKPOINT_MODE_MASK                0x3
         uint32_t addr_mode;          /* address match mode */
 
-#define PPC_BREAKPOINT_CONDITION_MODE   0x3
-#define PPC_BREAKPOINT_CONDITION_NONE   0x0
-#define PPC_BREAKPOINT_CONDITION_AND    0x1
-#define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
-#define PPC_BREAKPOINT_CONDITION_OR     0x2
-#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
-#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
-#define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
+  #define PPC_BREAKPOINT_CONDITION_MODE   0x3
+  #define PPC_BREAKPOINT_CONDITION_NONE   0x0
+  #define PPC_BREAKPOINT_CONDITION_AND    0x1
+  #define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
+  #define PPC_BREAKPOINT_CONDITION_OR     0x2
+  #define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+  #define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
+  #define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
         uint32_t condition_mode;     /* break/watchpoint condition flags */
 
         uint64_t addr;
         uint64_t addr2;
         uint64_t condition_value;
-};
+  };
 
 A request specifies one event, not necessarily just one register to be set.
 For instance, if the request is for a watchpoint with a condition, both the
@@ -88,61 +93,61 @@ can't be allocated on the registers.
 
 Some examples of using the structure to:
 
-- set a breakpoint in the first breakpoint register
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) address;
-  p.addr2           = 0;
-  p.condition_value = 0;
-
-- set a watchpoint which triggers on reads in the second watchpoint register
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) address;
-  p.addr2           = 0;
-  p.condition_value = 0;
-
-- set a watchpoint which triggers only with a specific value
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
-  p.addr            = (uint64_t) address;
-  p.addr2           = 0;
-  p.condition_value = (uint64_t) condition;
-
-- set a ranged hardware breakpoint
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) begin_range;
-  p.addr2           = (uint64_t) end_range;
-  p.condition_value = 0;
-
-- set a watchpoint in server processors (BookS)
-
-  p.version         = 1;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_RW;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
-  or
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) begin_range;
-  /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
-   * addr2 - addr <= 8 Bytes.
-   */
-  p.addr2           = (uint64_t) end_range;
-  p.condition_value = 0;
+- set a breakpoint in the first breakpoint register::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) begin_range;
+    p.addr2           = (uint64_t) end_range;
+    p.condition_value = 0;
+
+- set a watchpoint in server processors (BookS)::
+
+    p.version         = 1;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_RW;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+    or
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) begin_range;
+    /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+     * addr2 - addr <= 8 Bytes.
+     */
+    p.addr2           = (uint64_t) end_range;
+    p.condition_value = 0;
 
 3. PTRACE_DELHWDEBUG
 

Documentation/powerpc/qe_firmware.txt → Documentation/powerpc/qe_firmware.rst

-	   Freescale QUICC Engine Firmware Uploading
-	   -----------------------------------------
+=========================================
+Freescale QUICC Engine Firmware Uploading
+=========================================
 
 (c) 2007 Timur Tabi <timur at freescale.com>,
     Freescale Semiconductor
 
-Table of Contents
-=================
+.. Table of Contents
 
-  I - Software License for Firmware
+   I - Software License for Firmware
 
-  II - Microcode Availability
+   II - Microcode Availability
 
-  III - Description and Terminology
+   III - Description and Terminology
 
-  IV - Microcode Programming Details
+   IV - Microcode Programming Details
 
-  V - Firmware Structure Layout
+   V - Firmware Structure Layout
 
-  VI - Sample Code for Creating Firmware Files
+   VI - Sample Code for Creating Firmware Files
 
 Revision Information
 ====================
@@ -39,7 +39,7 @@ http://opensource.freescale.com.  For other firmware files, please contact
 your Freescale representative or your operating system vendor.
 
 III - Description and Terminology
-================================
+=================================
 
 In this document, the term 'microcode' refers to the sequence of 32-bit
 integers that compose the actual QE microcode.
@@ -89,7 +89,7 @@ being fixed in the RAM package utilizing they should be activated.  This data
 structure signals the microcode which of these virtual traps is active.
 
 This structure contains 6 words that the application should copy to some
-specific been defined.  This table describes the structure.
+specific been defined.  This table describes the structure::
 
 	---------------------------------------------------------------
 	| Offset in |                  | Destination Offset | Size of |
@@ -119,7 +119,7 @@ Extended Modes
 This is a double word bit array (64 bits) that defines special functionality
 which has an impact on the software drivers.  Each bit has its own impact
 and has special instructions for the s/w associated with it.  This structure is
-described in this table:
+described in this table::
 
 	-----------------------------------------------------------------------
 	| Bit #  |     Name     |   Description                               |
@@ -220,7 +220,8 @@ The 'model' field is a 16-bit number that matches the actual SOC. The
 'major' and 'minor' fields are the major and minor revision numbers,
 respectively, of the SOC.
 
-For example, to match the 8323, revision 1.0:
+For example, to match the 8323, revision 1.0::
+
      soc.model = 8323
      soc.major = 1
      soc.minor = 0
@@ -273,10 +274,10 @@ library and available to any driver that calles qe_get_firmware_info().
 	'reserved'.
 
 After the last microcode is a 32-bit CRC.  It can be calculated using
-this algorithm:
+this algorithm::
 
-u32 crc32(const u8 *p, unsigned int len)
-{
+  u32 crc32(const u8 *p, unsigned int len)
+  {
 	unsigned int i;
 	u32 crc = 0;
 
@@ -286,7 +287,7 @@ u32 crc32(const u8 *p, unsigned int len)
 		   crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
 	}
 	return crc;
-}
+  }
 
 VI - Sample Code for Creating Firmware Files
 ============================================

Documentation/powerpc/syscall64-abi.txt → Documentation/powerpc/syscall64-abi.rst

@@ -5,12 +5,12 @@ Power Architecture 64-bit Linux system call ABI
 syscall
 =======
 
-syscall calling sequence[*] matches the Power Architecture 64-bit ELF ABI
+syscall calling sequence\ [1]_ matches the Power Architecture 64-bit ELF ABI
 specification C function calling sequence, including register preservation
 rules, with the following differences.
 
-[*] Some syscalls (typically low-level management functions) may have
-    different calling sequences (e.g., rt_sigreturn).
+.. [1] Some syscalls (typically low-level management functions) may have
+       different calling sequences (e.g., rt_sigreturn).
 
 Parameters and return value
 ---------------------------
@@ -33,12 +33,14 @@ Register preservation rules
 Register preservation rules match the ELF ABI calling sequence with the
 following differences:
 
-r0:         Volatile.   (System call number.)
-r3:         Volatile.   (Parameter 1, and return value.)
-r4-r8:      Volatile.   (Parameters 2-6.)
-cr0:        Volatile    (cr0.SO is the return error condition)
-cr1, cr5-7: Nonvolatile.
-lr:         Nonvolatile.
+=========== ============= ========================================
+r0          Volatile      (System call number.)
+r3          Volatile      (Parameter 1, and return value.)
+r4-r8       Volatile      (Parameters 2-6.)
+cr0         Volatile      (cr0.SO is the return error condition)
+cr1, cr5-7  Nonvolatile
+lr          Nonvolatile
+=========== ============= ========================================
 
 All floating point and vector data registers as well as control and status
 registers are nonvolatile.
@@ -90,9 +92,12 @@ The vsyscall may or may not use the caller's stack frame save areas.
 
 Register preservation rules
 ---------------------------
-r0: Volatile.
-cr1, cr5-7: Volatile.
-lr: Volatile.
+
+=========== ========
+r0          Volatile
+cr1, cr5-7  Volatile
+lr          Volatile
+=========== ========
 
 Invocation
 ----------

Documentation/powerpc/transactional_memory.txt → Documentation/powerpc/transactional_memory.rst

+============================
 Transactional Memory support
 ============================
 
@@ -17,29 +18,29 @@ instructions are presented to delimit transactions; transactions are
 guaranteed to either complete atomically or roll back and undo any partial
 changes.
 
-A simple transaction looks like this:
+A simple transaction looks like this::
 
-begin_move_money:
-  tbegin
-  beq   abort_handler
+  begin_move_money:
+    tbegin
+    beq   abort_handler
 
-  ld    r4, SAVINGS_ACCT(r3)
-  ld    r5, CURRENT_ACCT(r3)
-  subi  r5, r5, 1
-  addi  r4, r4, 1
-  std   r4, SAVINGS_ACCT(r3)
-  std   r5, CURRENT_ACCT(r3)
+    ld    r4, SAVINGS_ACCT(r3)
+    ld    r5, CURRENT_ACCT(r3)
+    subi  r5, r5, 1
+    addi  r4, r4, 1
+    std   r4, SAVINGS_ACCT(r3)
+    std   r5, CURRENT_ACCT(r3)
 
-  tend
+    tend
 
-  b     continue
+    b     continue
 
-abort_handler:
-  ... test for odd failures ...
+  abort_handler:
+    ... test for odd failures ...
 
-  /* Retry the transaction if it failed because it conflicted with
-   * someone else: */
-  b     begin_move_money
+    /* Retry the transaction if it failed because it conflicted with
+     * someone else: */
+    b     begin_move_money
 
 
 The 'tbegin' instruction denotes the start point, and 'tend' the end point.
@@ -123,7 +124,7 @@ Transaction-aware signal handlers can read the transactional register state
 from the second ucontext.  This will be necessary for crash handlers to
 determine, for example, the address of the instruction causing the SIGSEGV.
 
-Example signal handler:
+Example signal handler::
 
     void crash_handler(int sig, siginfo_t *si, void *uc)
     {
@@ -133,9 +134,9 @@ Example signal handler:
       if (ucp_link) {
         u64 msr = ucp->uc_mcontext.regs->msr;
         /* May have transactional ucontext! */
-#ifndef __powerpc64__
+  #ifndef __powerpc64__
         msr |= ((u64)transactional_ucp->uc_mcontext.regs->msr) << 32;
-#endif
+  #endif
         if (MSR_TM_ACTIVE(msr)) {
            /* Yes, we crashed during a transaction.  Oops. */
    fprintf(stderr, "Transaction to be restarted at 0x%llx, but "
@@ -176,6 +177,7 @@ Failure cause codes used by kernel
 These are defined in <asm/reg.h>, and distinguish different reasons why the
 kernel aborted a transaction:
 
+ ====================== ================================
  TM_CAUSE_RESCHED       Thread was rescheduled.
  TM_CAUSE_TLBI          Software TLB invalid.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
@@ -184,6 +186,7 @@ kernel aborted a transaction:
  TM_CAUSE_MISC          Currently unused.
  TM_CAUSE_ALIGNMENT     Alignment fault.
  TM_CAUSE_EMULATE       Emulation that touched memory.
+ ====================== ================================
 
 These can be checked by the user program's abort handler as TEXASR[0:7].  If
 bit 7 is set, it indicates that the error is consider persistent.  For example
@@ -203,7 +206,7 @@ POWER9
 ======
 
 TM on POWER9 has issues with storing the complete register state. This
-is described in this commit:
+is described in this commit::
 
     commit 4bb3c7a0208fc13ca70598efd109901a7cd45ae7
     Author: Paul Mackerras <paulus@ozlabs.org>

Documentation/process/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = 'Linux Kernel Development Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'process.tex', 'Linux Kernel Development Documentation',
-     'The kernel development community', 'manual'),
-]

Documentation/sh/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "SuperH architecture implementation manual"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'sh.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/sound/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Sound Subsystem Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'sound.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/sphinx/load_config.py

@@ -21,6 +21,29 @@ def loadConfig(namespace):
         and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ):
         config_file = os.path.abspath(config_file)
 
+        # Let's avoid one conf.py file just due to latex_documents
+        start = config_file.find('Documentation/')
+        if start >= 0:
+            start = config_file.find('/', start + 1)
+
+        end = config_file.rfind('/')
+        if start >= 0 and end > 0:
+            dir = config_file[start + 1:end]
+
+            print("source directory: %s" % dir)
+            new_latex_docs = []
+            latex_documents = namespace['latex_documents']
+
+            for l in latex_documents:
+                if l[0].find(dir + '/') == 0:
+                    has = True
+                    fn = l[0][len(dir) + 1:]
+                    new_latex_docs.append((fn, l[1], l[2], l[3], l[4]))
+                    break
+
+            namespace['latex_documents'] = new_latex_docs
+
+        # If there is an extra conf.py file, load it
         if os.path.isfile(config_file):
             sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
             config = namespace.copy()
@@ -29,4 +52,6 @@ def loadConfig(namespace):
             del config['__file__']
             namespace.update(config)
         else:
-            sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file)
+            config = namespace.copy()
+            config['tags'].add("subproject")
+            namespace.update(config)

Documentation/translations/ko_KR/memory-barriers.txt

@@ -569,7 +569,7 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE
 
 	[*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다:
 
-	    Documentation/PCI/pci.rst
+	    Documentation/driver-api/pci/pci.rst
 	    Documentation/DMA-API-HOWTO.txt
 	    Documentation/DMA-API.txt
 

Documentation/userspace-api/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "The Linux kernel user-space API guide"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'userspace-api.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/virtual/kvm/index.rst

@@ -9,3 +9,4 @@ KVM
 
    amd-memory-encryption
    cpuid
+   vcpu-requests

Documentation/vm/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "Linux Memory Management Documentation"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'memory-management.tex', project,
-     'The kernel development community', 'manual'),
-]

Documentation/watchdog/hpwdt.rst

@@ -63,7 +63,7 @@ Last reviewed: 08/20/2018
  and loop forever.  This is generally not what a watchdog user wants.
 
  For those wishing to learn more please see:
-	Documentation/kdump/kdump.rst
+	Documentation/admin-guide/kdump/kdump.rst
 	Documentation/admin-guide/kernel-parameters.txt (panic=)
 	Your Linux Distribution specific documentation.
 

Documentation/x86/conf.py

-# -*- coding: utf-8; mode: python -*-
-
-project = "X86 architecture specific documentation"
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'x86.tex', project,
-     'The kernel development community', 'manual'),
-]

MAINTAINERS

@@ -899,7 +899,7 @@ L:	linux-iio@vger.kernel.org
 W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/iio/adc/ad7124.c
-F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
 
 ANALOG DEVICES INC AD7606 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
@@ -4190,7 +4190,7 @@ M:	Jens Axboe <axboe@kernel.dk>
 L:	cgroups@vger.kernel.org
 L:	linux-block@vger.kernel.org
 T:	git git://git.kernel.dk/linux-block
-F:	Documentation/cgroup-v1/blkio-controller.rst
+F:	Documentation/admin-guide/cgroup-v1/blkio-controller.rst
 F:	block/blk-cgroup.c
 F:	include/linux/blk-cgroup.h
 F:	block/blk-throttle.c
@@ -4469,7 +4469,7 @@ F:	arch/powerpc/platforms/powernv/pci-cxl.c
 F:	drivers/misc/cxl/
 F:	include/misc/cxl*
 F:	include/uapi/misc/cxl.h
-F:	Documentation/powerpc/cxl.txt
+F:	Documentation/powerpc/cxl.rst
 F:	Documentation/ABI/testing/sysfs-class-cxl
 
 CXLFLASH (IBM Coherent Accelerator Processor Interface CAPI Flash) SCSI DRIVER
@@ -4480,7 +4480,7 @@ L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/cxlflash/
 F:	include/uapi/scsi/cxlflash_ioctl.h
-F:	Documentation/powerpc/cxlflash.txt
+F:	Documentation/powerpc/cxlflash.rst
 
 CYBERPRO FB DRIVER
 M:	Russell King <linux@armlinux.org.uk>
@@ -6856,7 +6856,7 @@ R:	Sagi Shahar <sagis@google.com>
 R:	Jon Olson <jonolson@google.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	Documentation/networking/device_drivers/google/gve.txt
+F:	Documentation/networking/device_drivers/google/gve.rst
 F:	drivers/net/ethernet/google
 
 GPD POCKET FAN DRIVER
@@ -12137,7 +12137,7 @@ M:	Thomas Hellstrom <thellstrom@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
-F:	Documentation/virtual/paravirt_ops.txt
+F:	Documentation/virtual/paravirt_ops.rst
 F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt*.h
 F:	include/linux/hypervisor.h
@@ -12394,7 +12394,7 @@ F:	Documentation/PCI/pci-error-recovery.rst
 F:	drivers/pci/pcie/aer.c
 F:	drivers/pci/pcie/dpc.c
 F:	drivers/pci/pcie/err.c
-F:	Documentation/powerpc/eeh-pci-error-recovery.txt
+F:	Documentation/powerpc/eeh-pci-error-recovery.rst
 F:	arch/powerpc/kernel/eeh*.c
 F:	arch/powerpc/platforms/*/eeh*.c
 F:	arch/powerpc/include/*/eeh*.h

arch/powerpc/kernel/exceptions-64s.S

@@ -1531,7 +1531,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
  *
  * Call convention:
  *
- * syscall register convention is in Documentation/powerpc/syscall64-abi.txt
+ * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
  *
  * For hypercalls, the register convention is as follows:
  * r0 volatile

drivers/gpu/drm/drm_modes.c

@@ -1686,7 +1686,7 @@ static int drm_mode_parse_cmdline_options(char *str, size_t len,
  *
  * Additionals options can be provided following the mode, using a comma to
  * separate each option. Valid options can be found in
- * Documentation/fb/modedb.txt.
+ * Documentation/fb/modedb.rst.
  *
  * The intermediate drm_cmdline_mode structure is required to store additional
  * options from the command line modline like the force-enable/disable flag.

drivers/i2c/busses/i2c-nvidia-gpu.c

@@ -364,7 +364,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev)
 /*
  * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work
  * correctly. Without it, lspci shows runtime pm status as "D0" for the card.
- * Documentation/power/pci.txt also insists for driver to provide this.
+ * Documentation/power/pci.rst also insists for driver to provide this.
  */
 static __maybe_unused int gpu_i2c_suspend(struct device *dev)
 {

drivers/scsi/hpsa.c

@@ -7798,7 +7798,7 @@ static void hpsa_free_pci_init(struct ctlr_info *h)
 	hpsa_disable_interrupt_mode(h);		/* pci_init 2 */
 	/*
 	 * call pci_disable_device before pci_release_regions per
-	 * Documentation/PCI/pci.rst
+	 * Documentation/driver-api/pci/pci.rst
 	 */
 	pci_disable_device(h->pdev);		/* pci_init 1 */
 	pci_release_regions(h->pdev);		/* pci_init 2 */
@@ -7881,7 +7881,7 @@ static int hpsa_pci_init(struct ctlr_info *h)
 clean1:
 	/*
 	 * call pci_disable_device before pci_release_regions per
-	 * Documentation/PCI/pci.rst
+	 * Documentation/driver-api/pci/pci.rst
 	 */
 	pci_disable_device(h->pdev);
 	pci_release_regions(h->pdev);

drivers/soc/fsl/qe/qe.c

@@ -419,7 +419,7 @@ static void qe_upload_microcode(const void *base,
 /*
  * Upload a microcode to the I-RAM at a specific address.
  *
- * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
+ * See Documentation/powerpc/qe_firmware.rst for information on QE microcode
  * uploading.
  *
  * Currently, only version 1 is supported, so the 'version' field must be

drivers/tty/hvc/hvcs.c

@@ -47,7 +47,7 @@
  * using the 2.6 Linux kernel kref construct.
  *
  * For direction on installation and usage of this driver please reference
- * Documentation/powerpc/hvcs.txt.
+ * Documentation/powerpc/hvcs.rst.
  */
 
 #include <linux/device.h>

include/soc/fsl/qe/qe.h

@@ -259,7 +259,7 @@ static inline int qe_alive_during_sleep(void)
 
 /* Structure that defines QE firmware binary files.
  *
- * See Documentation/powerpc/qe_firmware.txt for a description of these
+ * See Documentation/powerpc/qe_firmware.rst for a description of these
  * fields.
  */
 struct qe_firmware {

scripts/sphinx-pre-install

@@ -83,6 +83,17 @@ sub check_missing(%)
 	foreach my $prog (sort keys %missing) {
 		my $is_optional = $missing{$prog};
 
+		# At least on some LTS distros like CentOS 7, texlive doesn't
+		# provide all packages we need. When such distros are
+		# detected, we have to disable PDF output.
+		#
+		# So, we need to ignore the packages that distros would
+		# need for LaTeX to work
+		if ($is_optional == 2 && !$pdf) {
+			$optional--;
+			next;
+		}
+
 		if ($is_optional) {
 			print "Warning: better to also install \"$prog\".\n";
 		} else {
@@ -333,10 +344,13 @@ sub give_debian_hints()
 
 	if ($pdf) {
 		check_missing_file("/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf",
-				   "fonts-dejavu", 1);
+				   "fonts-dejavu", 2);
+
+		check_missing_file("/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc",
+				   "fonts-noto-cjk", 2);
 	}
 
-	check_program("dvipng", 1) if ($pdf);
+	check_program("dvipng", 2) if ($pdf);
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
@@ -363,6 +377,7 @@ sub give_redhat_hints()
 	my @fedora_tex_pkgs = (
 		"texlive-collection-fontsrecommended",
 		"texlive-collection-latex",
+		"texlive-xecjk",
 		"dejavu-sans-fonts",
 		"dejavu-serif-fonts",
 		"dejavu-sans-mono-fonts",
@@ -371,22 +386,45 @@ sub give_redhat_hints()
 	#
 	# Checks valid for RHEL/CentOS version 7.x.
 	#
-	if (! $system_release =~ /Fedora/) {
+	my $old = 0;
+	my $rel;
+	$rel = $1 if ($system_release =~ /release\s+(\d+)/);
+
+	if (!($system_release =~ /Fedora/)) {
 		$map{"virtualenv"} = "python-virtualenv";
-	}
 
-	my $release;
+		if ($rel && $rel < 8) {
+			$old = 1;
+			$pdf = 0;
+
+			printf("Note: texlive packages on RHEL/CENTOS <= 7 are incomplete. Can't support PDF output\n");
+			printf("If you want to build PDF, please read:\n");
+			printf("\thttps://www.systutorials.com/241660/how-to-install-tex-live-on-centos-7-linux/\n");
+		}
+	} else {
+		if ($rel && $rel < 26) {
+			$old = 1;
+		}
+	}
+	if (!$rel) {
+		printf("Couldn't identify release number\n");
+		$old = 1;
+		$pdf = 0;
+	}
 
-	$release = $1 if ($system_release =~ /Fedora\s+release\s+(\d+)/);
+	if ($pdf) {
+		check_missing_file("/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc",
+				   "google-noto-sans-cjk-ttc-fonts", 2);
+	}
 
-	check_rpm_missing(\@fedora26_opt_pkgs, 1) if ($pdf && $release >= 26);
-	check_rpm_missing(\@fedora_tex_pkgs, 1) if ($pdf);
-	check_missing_tex(1) if ($pdf);
+	check_rpm_missing(\@fedora26_opt_pkgs, 2) if ($pdf && !$old);
+	check_rpm_missing(\@fedora_tex_pkgs, 2) if ($pdf);
+	check_missing_tex(2) if ($pdf);
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
 
-	if ($release >= 18) {
+	if (!$old) {
 		# dnf, for Fedora 18+
 		printf("You should run:\n\n\tsudo dnf install -y $install\n");
 	} else {
@@ -425,8 +463,15 @@ sub give_opensuse_hints()
 		"texlive-zapfding",
 	);
 
-	check_rpm_missing(\@suse_tex_pkgs, 1) if ($pdf);
-	check_missing_tex(1) if ($pdf);
+	$map{"latexmk"} = "texlive-latexmk-bin";
+
+	# FIXME: add support for installing CJK fonts
+	#
+	# I tried hard, but was unable to find a way to install
+	# "Noto Sans CJK SC" on openSUSE
+
+	check_rpm_missing(\@suse_tex_pkgs, 2) if ($pdf);
+	check_missing_tex(2) if ($pdf);
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
@@ -450,7 +495,14 @@ sub give_mageia_hints()
 		"texlive-fontsextra",
 	);
 
-	check_rpm_missing(\@tex_pkgs, 1) if ($pdf);
+	$map{"latexmk"} = "texlive-collection-basic";
+
+	if ($pdf) {
+		check_missing_file("/usr/share/fonts/google-noto-cjk/NotoSansCJK-Regular.ttc",
+				   "google-noto-sans-cjk-ttc-fonts", 2);
+	}
+
+	check_rpm_missing(\@tex_pkgs, 2) if ($pdf);
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
@@ -473,7 +525,13 @@ sub give_arch_linux_hints()
 		"texlive-latexextra",
 		"ttf-dejavu",
 	);
-	check_pacman_missing(\@archlinux_tex_pkgs, 1) if ($pdf);
+	check_pacman_missing(\@archlinux_tex_pkgs, 2) if ($pdf);
+
+	if ($pdf) {
+		check_missing_file("/usr/share/fonts/noto-cjk/NotoSansCJK-Regular.ttc",
+				   "noto-fonts-cjk", 2);
+	}
+
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
@@ -492,15 +550,31 @@ sub give_gentoo_hints()
 	);
 
 	check_missing_file("/usr/share/fonts/dejavu/DejaVuSans.ttf",
-			   "media-fonts/dejavu", 1) if ($pdf);
+			   "media-fonts/dejavu", 2) if ($pdf);
+
+	if ($pdf) {
+		check_missing_file("/usr/share/fonts/noto-cjk/NotoSansCJKsc-Regular.otf",
+				   "media-fonts/noto-cjk", 2);
+	}
 
 	check_missing(\%map);
 
 	return if (!$need && !$optional);
 
 	printf("You should run:\n\n");
-	printf("\tsudo su -c 'echo \"media-gfx/imagemagick svg png\" > /etc/portage/package.use/imagemagick'\n");
-	printf("\tsudo su -c 'echo \"media-gfx/graphviz cairo pdf\" > /etc/portage/package.use/graphviz'\n");
+
+	my $imagemagick = "media-gfx/imagemagick svg png";
+	my $cairo = "media-gfx/graphviz cairo pdf";
+	my $portage_imagemagick = "/etc/portage/package.use/imagemagick";
+	my $portage_cairo = "/etc/portage/package.use/graphviz";
+
+	if (qx(cat $portage_imagemagick) ne "$imagemagick\n") {
+		printf("\tsudo su -c 'echo \"$imagemagick\" > $portage_imagemagick'\n")
+	}
+	if (qx(cat $portage_cairo) ne  "$cairo\n") {
+		printf("\tsudo su -c 'echo \"$cairo\" > $portage_cairo'\n");
+	}
+
 	printf("\tsudo emerge --ask $install\n");
 
 }
@@ -560,7 +634,7 @@ sub check_distros()
 	my %map = (
 		"sphinx-build" => "sphinx"
 	);
-	check_missing_tex(1) if ($pdf);
+	check_missing_tex(2) if ($pdf);
 	check_missing(\%map);
 	print "I don't know distro $system_release.\n";
 	print "So, I can't provide you a hint with the install procedure.\n";
@@ -589,11 +663,13 @@ sub check_needs()
 	check_program("make", 0);
 	check_program("gcc", 0);
 	check_python_module("sphinx_rtd_theme", 1) if (!$virtualenv);
-	check_program("xelatex", 1) if ($pdf);
 	check_program("dot", 1);
 	check_program("convert", 1);
-	check_program("rsvg-convert", 1) if ($pdf);
-	check_program("latexmk", 1) if ($pdf);
+
+	# Extra PDF files - should use 2 for is_optional
+	check_program("xelatex", 2) if ($pdf);
+	check_program("rsvg-convert", 2) if ($pdf);
+	check_program("latexmk", 2) if ($pdf);
 
 	check_distros();