powerpc/powernv: Add calls to support little endian host

When running as a powernv "host" system on P8, we need to switch
the endianness of interrupt handlers. This does it via the appropriate
call to the OPAL firmware which may result in just switching HID0:HILE
but depending on the processor version might need to do a few more
things. This call must be done early before any other processor has
been brought out of firmware.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarAndy Whitcroft <apw@canonical.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 26c88f93
......@@ -154,6 +154,7 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_LPC_READ 67
#define OPAL_LPC_WRITE 68
#define OPAL_RETURN_CPU 69
#define OPAL_REINIT_CPUS 70
#define OPAL_ELOG_READ 71
#define OPAL_ELOG_WRITE 72
#define OPAL_ELOG_ACK 73
......@@ -725,6 +726,11 @@ struct OpalIoPhb3ErrorData {
uint64_t pestB[OPAL_PHB3_NUM_PEST_REGS];
};
enum {
OPAL_REINIT_CPUS_HILE_BE = (1 << 0),
OPAL_REINIT_CPUS_HILE_LE = (1 << 1),
};
typedef struct oppanel_line {
const char * line;
uint64_t line_len;
......@@ -849,6 +855,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
uint16_t *pci_error_type, uint16_t *severity);
int64_t opal_pci_poll(uint64_t phb_id);
int64_t opal_return_cpu(void);
int64_t opal_reinit_cpus(uint64_t flags);
int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val);
int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val);
......
......@@ -124,6 +124,7 @@ OPAL_CALL(opal_xscom_write, OPAL_XSCOM_WRITE);
OPAL_CALL(opal_lpc_read, OPAL_LPC_READ);
OPAL_CALL(opal_lpc_write, OPAL_LPC_WRITE);
OPAL_CALL(opal_return_cpu, OPAL_RETURN_CPU);
OPAL_CALL(opal_reinit_cpus, OPAL_REINIT_CPUS);
OPAL_CALL(opal_read_elog, OPAL_ELOG_READ);
OPAL_CALL(opal_send_ack_elog, OPAL_ELOG_ACK);
OPAL_CALL(opal_get_elog_size, OPAL_ELOG_SIZE);
......
......@@ -57,6 +57,21 @@ static DEFINE_SPINLOCK(opal_notifier_lock);
static uint64_t last_notified_mask = 0x0ul;
static atomic_t opal_notifier_hold = ATOMIC_INIT(0);
static void opal_reinit_cores(void)
{
/* Do the actual re-init, This will clobber all FPRs, VRs, etc...
*
* It will preserve non volatile GPRs and HSPRG0/1. It will
* also restore HIDs and other SPRs to their original value
* but it might clobber a bunch.
*/
#ifdef __BIG_ENDIAN__
opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE);
#else
opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE);
#endif
}
int __init early_init_dt_scan_opal(unsigned long node,
const char *uname, int depth, void *data)
{
......@@ -96,6 +111,13 @@ int __init early_init_dt_scan_opal(unsigned long node,
printk("OPAL V1 detected !\n");
}
/* Reinit all cores with the right endian */
opal_reinit_cores();
/* Restore some bits */
if (cur_cpu_spec->cpu_restore)
cur_cpu_spec->cpu_restore();
return 1;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment