Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (49 commits)
  [MTD] [NAND] S3C2412 fix hw ecc
  [MTD] [NAND] Work around false compiler warning in CAFÉ driver
  [JFFS2] printk warning fixes
  [MTD] [MAPS] ichxrom warning fix
  [MTD] [MAPS] amd76xrom warning fix
  [MTD] [MAPS] esb2rom warning fixes
  [MTD] [MAPS] ck804xrom warning fix
  [MTD] [MAPS] netsc520 warning fix
  [MTD] [MAPS] sc520cdp warning fix
  [MTD] [ONENAND] onenand_base warning fix
  [MTD] [NAND] eXcite nand flash driver
  [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table
  [MTD] Fix RedBoot partition parsing regression harder.
  [MTD] [NAND] S3C2410: Hardware ECC correction code
  [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
  [MTD] Clarify OOB-operation interface comments
  [MTD] remove unused ecctype,eccsize fields from struct mtd_info
  [MTD] [NOR] Intel: remove ugly PROGREGION macros
  [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block
  [MTD] OneNAND: Invalidate bufferRAM after erase
  ...

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -397,9 +397,23 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	cfi_fixup(mtd, fixup_table);
 
 	for (i=0; i< cfi->numchips; i++) {
-		cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
-		cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
-		cfi->chips[i].erase_time = 1000<<cfi->cfiq->BlockEraseTimeoutTyp;
+		if (cfi->cfiq->WordWriteTimeoutTyp)
+			cfi->chips[i].word_write_time =
+				1<<cfi->cfiq->WordWriteTimeoutTyp;
+		else
+			cfi->chips[i].word_write_time = 50000;
+
+		if (cfi->cfiq->BufWriteTimeoutTyp)
+			cfi->chips[i].buffer_write_time =
+				1<<cfi->cfiq->BufWriteTimeoutTyp;
+		/* No default; if it isn't specified, we won't use it */
+
+		if (cfi->cfiq->BlockEraseTimeoutTyp)
+			cfi->chips[i].erase_time =
+				1000<<cfi->cfiq->BlockEraseTimeoutTyp;
+		else
+			cfi->chips[i].erase_time = 2000000;
+
 		cfi->chips[i].ref_point_counter = 0;
 		init_waitqueue_head(&(cfi->chips[i].wq));
 	}
@@ -546,13 +560,11 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 			struct cfi_intelext_programming_regioninfo *prinfo;
 			prinfo = (struct cfi_intelext_programming_regioninfo *)&extp->extra[offs];
 			mtd->writesize = cfi->interleave << prinfo->ProgRegShift;
-			MTD_PROGREGION_CTRLMODE_VALID(mtd) = cfi->interleave * prinfo->ControlValid;
-			MTD_PROGREGION_CTRLMODE_INVALID(mtd) = cfi->interleave * prinfo->ControlInvalid;
 			mtd->flags &= ~MTD_BIT_WRITEABLE;
 			printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n",
 			       map->name, mtd->writesize,
-			       MTD_PROGREGION_CTRLMODE_VALID(mtd),
-			       MTD_PROGREGION_CTRLMODE_INVALID(mtd));
+			       cfi->interleave * prinfo->ControlValid,
+			       cfi->interleave * prinfo->ControlInvalid);
 		}
 
 		/*

drivers/mtd/chips/cfi_cmdset_0020.c

@@ -662,7 +662,7 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
  * a small buffer for this.
  * XXX: If the buffer size is not a multiple of 2, this will break
  */
-#define ECCBUF_SIZE (mtd->eccsize)
+#define ECCBUF_SIZE (mtd->writesize)
 #define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1))
 #define ECCBUF_MOD(x) ((x) &  (ECCBUF_SIZE - 1))
 static int

drivers/mtd/devices/doc2000.c

@@ -569,7 +569,6 @@ void DoC2k_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 	mtd->size = 0;
 	mtd->erasesize = 0;
 	mtd->writesize = 512;

drivers/mtd/devices/doc2001.c

@@ -348,7 +348,6 @@ void DoCMil_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 	mtd->size = 0;
 
 	/* FIXME: erase size is not always 8KiB */

drivers/mtd/devices/doc2001plus.c

@@ -472,7 +472,6 @@ void DoCMilPlus_init(struct mtd_info *mtd)
 
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 	mtd->size = 0;
 
 	mtd->erasesize = 0;

drivers/mtd/maps/Kconfig

@@ -204,7 +204,7 @@ config MTD_ESB2ROM
 
 config MTD_CK804XROM
 	tristate "BIOS flash chip on Nvidia CK804"
-	depends on X86 && MTD_JEDECPROBE
+	depends on X86 && MTD_JEDECPROBE && PCI
 	help
 	  Support for treating the BIOS flash chip on nvidia motherboards
 	  as an MTD device - with this you can reprogram your BIOS.

drivers/mtd/maps/amd76xrom.c

@@ -205,8 +205,8 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* There is no generic VPP support */
 		for(map->map.bankwidth = 32; map->map.bankwidth;

drivers/mtd/maps/ck804xrom.c

@@ -207,8 +207,8 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* There is no generic VPP support */
 		for(map->map.bankwidth = 32; map->map.bankwidth;
@@ -327,7 +327,7 @@ static int __init init_ck804xrom(void)
 	pdev = NULL;
 
 	for(id = ck804xrom_pci_tbl; id->vendor; id++) {
-		pdev = pci_find_device(id->vendor, id->device, NULL);
+		pdev = pci_get_device(id->vendor, id->device, NULL);
 		if (pdev)
 			break;
 	}

drivers/mtd/maps/esb2rom.c

@@ -289,8 +289,8 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* Firmware hubs only use vpp when being programmed
 		 * in a factory setting.  So in-place programming

drivers/mtd/maps/ichxrom.c

@@ -227,8 +227,8 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
 			(((unsigned long)(window->virt)) + offset);
 		map->map.size = 0xffffffffUL - map_top + 1UL;
 		/* Set the name of the map to the address I am trying */
-		sprintf(map->map_name, "%s @%08lx",
-			MOD_NAME, map->map.phys);
+		sprintf(map->map_name, "%s @%08Lx",
+			MOD_NAME, (unsigned long long)map->map.phys);
 
 		/* Firmware hubs only use vpp when being programmed
 		 * in a factory setting.  So in-place programming

drivers/mtd/maps/netsc520.c

@@ -94,7 +94,9 @@ static struct mtd_info *mymtd;
 
 static int __init init_netsc520(void)
 {
-	printk(KERN_NOTICE "NetSc520 flash device: 0x%lx at 0x%lx\n", netsc520_map.size, netsc520_map.phys);
+	printk(KERN_NOTICE "NetSc520 flash device: 0x%Lx at 0x%Lx\n",
+			(unsigned long long)netsc520_map.size,
+			(unsigned long long)netsc520_map.phys);
 	netsc520_map.virt = ioremap_nocache(netsc520_map.phys, netsc520_map.size);
 
 	if (!netsc520_map.virt) {

drivers/mtd/maps/sc520cdp.c

@@ -237,8 +237,9 @@ static int __init init_sc520cdp(void)
 #endif
 
 	for (i = 0; i < NUM_FLASH_BANKS; i++) {
-		printk(KERN_NOTICE "SC520 CDP flash device: 0x%lx at 0x%lx\n",
-		       sc520cdp_map[i].size, sc520cdp_map[i].phys);
+		printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",
+			(unsigned long long)sc520cdp_map[i].size,
+			(unsigned long long)sc520cdp_map[i].phys);
 
 		sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size);
 

drivers/mtd/mtdchar.c

@@ -419,8 +419,9 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		info.erasesize	= mtd->erasesize;
 		info.writesize	= mtd->writesize;
 		info.oobsize	= mtd->oobsize;
-		info.ecctype	= mtd->ecctype;
-		info.eccsize	= mtd->eccsize;
+		/* The below fields are obsolete */
+		info.ecctype	= -1;
+		info.eccsize	= 0;
 		if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
 			return -EFAULT;
 		break;

drivers/mtd/mtdconcat.c

@@ -727,8 +727,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 	concat->mtd.erasesize = subdev[0]->erasesize;
 	concat->mtd.writesize = subdev[0]->writesize;
 	concat->mtd.oobsize = subdev[0]->oobsize;
-	concat->mtd.ecctype = subdev[0]->ecctype;
-	concat->mtd.eccsize = subdev[0]->eccsize;
 	if (subdev[0]->writev)
 		concat->mtd.writev = concat_writev;
 	if (subdev[0]->read_oob)
@@ -774,8 +772,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 		if (concat->mtd.writesize   !=  subdev[i]->writesize ||
 		    concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
 		    concat->mtd.oobsize    !=  subdev[i]->oobsize ||
-		    concat->mtd.ecctype    !=  subdev[i]->ecctype ||
-		    concat->mtd.eccsize    !=  subdev[i]->eccsize ||
 		    !concat->mtd.read_oob  != !subdev[i]->read_oob ||
 		    !concat->mtd.write_oob != !subdev[i]->write_oob) {
 			kfree(concat);

drivers/mtd/mtdpart.c

@@ -338,8 +338,6 @@ int add_mtd_partitions(struct mtd_info *master,
 		slave->mtd.size = parts[i].size;
 		slave->mtd.writesize = master->writesize;
 		slave->mtd.oobsize = master->oobsize;
-		slave->mtd.ecctype = master->ecctype;
-		slave->mtd.eccsize = master->eccsize;
 		slave->mtd.subpage_sft = master->subpage_sft;
 
 		slave->mtd.name = parts[i].name;

drivers/mtd/nand/Kconfig

@@ -126,10 +126,6 @@ config MTD_NAND_S3C2410_HWECC
 	  incorrect ECC generation, and if using these, the default of
 	  software ECC is preferable.
 
-	  If you lay down a device with the hardware ECC, then you will
-	  currently not be able to switch to software, as there is no
-	  implementation for ECC method used by the S3C2410
-
 config MTD_NAND_NDFC
 	tristate "NDFC NanD Flash Controller"
 	depends on MTD_NAND && 44x
@@ -221,9 +217,17 @@ config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on MTD_NAND && ARCH_PXA
 
+config MTD_NAND_BASLER_EXCITE
+	tristate  "Support for NAND Flash on Basler eXcite"
+	depends on MTD_NAND && BASLER_EXCITE
+	help
+          This enables the driver for the NAND flash device found on the
+          Basler eXcite Smart Camera. If built as a module, the driver
+          will be named "excite_nandflash.ko".
+
 config MTD_NAND_CAFE
        tristate "NAND support for OLPC CAFÉ chip"
-       depends on PCI
+       depends on MTD_NAND && PCI
        help
 	 Use NAND flash attached to the CAFÉ chip designed for the $100
 	 laptop.

drivers/mtd/nand/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
+obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 
 nand-objs := nand_base.o nand_bbt.o
 cafe_nand-objs := cafe.o cafe_ecc.o

drivers/mtd/nand/cafe.c

@@ -78,8 +78,9 @@ module_param(regdebug, int, 0644);
 static int checkecc = 1;
 module_param(checkecc, int, 0644);
 
-static int slowtiming = 0;
-module_param(slowtiming, int, 0644);
+static int numtimings;
+static int timing[3];
+module_param_array(timing, int, &numtimings, 0644);
 
 /* Hrm. Why isn't this already conditional on something in the struct device? */
 #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
@@ -264,10 +265,10 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 	ndelay(100);
 
 	if (1) {
-		int c = 500000;
+		int c;
 		uint32_t irqs;
 
-		while (c--) {
+		for (c = 500000; c != 0; c--) {
 			irqs = cafe_readl(cafe, NAND_IRQ);
 			if (irqs & doneint)
 				break;
@@ -529,6 +530,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
+	uint32_t timing1, timing2, timing3;
 	uint32_t ctrl;
 	int err = 0;
 
@@ -580,31 +582,45 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 		cafe->nand.block_bad = cafe_nand_block_bad;
 	}
 
+	if (numtimings && numtimings != 3) {
+		dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
+	}
+
+	if (numtimings == 3) {
+		timing1 = timing[0];
+		timing2 = timing[1];
+		timing3 = timing[2];
+		cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
+			     timing1, timing2, timing3);
+	} else {
+		timing1 = cafe_readl(cafe, NAND_TIMING1);
+		timing2 = cafe_readl(cafe, NAND_TIMING2);
+		timing3 = cafe_readl(cafe, NAND_TIMING3);
+
+		if (timing1 | timing2 | timing3) {
+			cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n", timing1, timing2, timing3);
+		} else {
+			dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
+			timing1 = timing2 = timing3 = 0xffffffff;
+		}
+	}
+
 	/* Start off by resetting the NAND controller completely */
 	cafe_writel(cafe, 1, NAND_RESET);
 	cafe_writel(cafe, 0, NAND_RESET);
 
-	cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+	cafe_writel(cafe, timing1, NAND_TIMING1);
+	cafe_writel(cafe, timing2, NAND_TIMING2);
+	cafe_writel(cafe, timing3, NAND_TIMING3);
 
-	/* Timings from Marvell's test code (not verified or calculated by us) */
-	if (!slowtiming) {
-		cafe_writel(cafe, 0x01010a0a, NAND_TIMING1);
-		cafe_writel(cafe, 0x24121212, NAND_TIMING2);
-		cafe_writel(cafe, 0x11000000, NAND_TIMING3);
-	} else {
-		cafe_writel(cafe, 0xffffffff, NAND_TIMING1);
-		cafe_writel(cafe, 0xffffffff, NAND_TIMING2);
-		cafe_writel(cafe, 0xffffffff, NAND_TIMING3);
-	}
 	cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
 	err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED,
 			  "CAFE NAND", mtd);
 	if (err) {
 		dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-
 		goto out_free_dma;
 	}
-#if 1
+
 	/* Disable master reset, enable NAND clock */
 	ctrl = cafe_readl(cafe, GLOBAL_CTRL);
 	ctrl &= 0xffffeff0;
@@ -631,32 +647,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 	cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
 	cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
 		cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
-#endif
-#if 1
-	mtd->writesize=2048;
-	mtd->oobsize = 0x40;
-	memset(cafe->dmabuf, 0x5a, 2112);
-	cafe->nand.cmdfunc(mtd, NAND_CMD_READID, 0, -1);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-#endif
-#if 0
-	cafe->nand.cmdfunc(mtd, NAND_CMD_READ0, 0, 0);
-	//	nand_wait_ready(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-	cafe->nand.read_byte(mtd);
-#endif
-#if 0
-	writel(0x84600070, cafe->mmio);
-	udelay(10);
-	cafe_dev_dbg(&cafe->pdev->dev, "Status %x\n", cafe_readl(cafe, NAND_NONMEM));
-#endif
-	/* Scan to find existance of the device */
+
+	/* Scan to find existence of the device */
 	if (nand_scan_ident(mtd, 1)) {
 		err = -ENXIO;
 		goto out_irq;
@@ -760,13 +752,4 @@ module_exit(cafe_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("NAND flash driver for OLPC CAFE chip");
-
-/* Correct ECC for 2048 bytes of 0xff:
-   41 a0 71 65 54 27 f3 93 ec a9 be ed 0b a1 */
-
-/* dwmw2's B-test board, in case of completely screwing it:
-Bad eraseblock 2394 at 0x12b40000
-Bad eraseblock 2627 at 0x14860000
-Bad eraseblock 3349 at 0x1a2a0000
-*/
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip");

drivers/mtd/nand/cafe_ecc.c

@@ -1045,7 +1045,7 @@ static unsigned short err_pos_lut[4096] = {
 
 static unsigned short err_pos(unsigned short din)
 {
-	BUG_ON(din > 4096);
+	BUG_ON(din >= ARRAY_SIZE(err_pos_lut));
 	return err_pos_lut[din];
 }
 static int chk_no_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)

drivers/mtd/nand/excite_nandflash.c

+/*
+*  Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
+*  Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
+*  Original code by Thies Moeller <thies.moeller@baslerweb.com>
+*
+*  This program is free software; you can redistribute it and/or modify
+*  it under the terms of the GNU General Public License as published by
+*  the Free Software Foundation; either version 2 of the License, or
+*  (at your option) any later version.
+*
+*  This program is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*  GNU General Public License for more details.
+*
+*  You should have received a copy of the GNU General Public License
+*  along with this program; if not, write to the Free Software
+*  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite_nandflash.h>
+
+#define EXCITE_NANDFLASH_VERSION "0.1"
+
+/* I/O register offsets */
+#define EXCITE_NANDFLASH_DATA_BYTE   0x00
+#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
+#define EXCITE_NANDFLASH_ADDR_BYTE   0x10
+#define EXCITE_NANDFLASH_CMD_BYTE    0x14
+
+/* prefix for debug output */
+static const char module_id[] = "excite_nandflash";
+
+/*
+ * partition definition
+ */
+static const struct mtd_partition partition_info[] = {
+	{
+		.name = "eXcite RootFS",
+		.offset = 0,
+		.size = MTDPART_SIZ_FULL
+	}
+};
+
+static inline const struct resource *
+excite_nand_get_resource(struct platform_device *d, unsigned long flags,
+			 const char *basename)
+{
+	char buf[80];
+
+	if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
+		return NULL;
+	return platform_get_resource_byname(d, flags, buf);
+}
+
+static inline void __iomem *
+excite_nand_map_regs(struct platform_device *d, const char *basename)
+{
+	void *result = NULL;
+	const struct resource *const r =
+	    excite_nand_get_resource(d, IORESOURCE_MEM, basename);
+
+	if (r)
+		result = ioremap_nocache(r->start, r->end + 1 - r->start);
+	return result;
+}
+
+/* controller and mtd information */
+struct excite_nand_drvdata {
+	struct mtd_info board_mtd;
+	struct nand_chip board_chip;
+	void __iomem *regs;
+	void __iomem *tgt;
+};
+
+/* Control function */
+static void excite_nand_control(struct mtd_info *mtd, int cmd,
+				       unsigned int ctrl)
+{
+	struct excite_nand_drvdata * const d =
+	    container_of(mtd, struct excite_nand_drvdata, board_mtd);
+
+	switch (ctrl) {
+	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
+		d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
+		break;
+	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
+		d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
+		break;
+	case NAND_CTRL_CHANGE | NAND_NCE:
+		d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
+		break;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		__raw_writeb(cmd, d->tgt);
+}
+
+/* Return 0 if flash is busy, 1 if ready */
+static int excite_nand_devready(struct mtd_info *mtd)
+{
+	struct excite_nand_drvdata * const drvdata =
+	    container_of(mtd, struct excite_nand_drvdata, board_mtd);
+
+	return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
+}
+
+/*
+ * Called by device layer to remove the driver.
+ * The binding to the mtd and all allocated
+ * resources are released.
+ */
+static int __exit excite_nand_remove(struct device *dev)
+{
+	struct excite_nand_drvdata * const this = dev_get_drvdata(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	if (unlikely(!this)) {
+		printk(KERN_ERR "%s: called %s without private data!!",
+		       module_id, __func__);
+		return -EINVAL;
+	}
+
+	/* first thing we need to do is release our mtd
+	 * then go through freeing the resource used
+	 */
+	nand_release(&this->board_mtd);
+
+	/* free the common resources */
+	iounmap(this->regs);
+	kfree(this);
+
+	DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
+	return 0;
+}
+
+/*
+ * Called by device layer when it finds a device matching
+ * one our driver can handle. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices.
+*/
+static int __init excite_nand_probe(struct device *dev)
+{
+	struct platform_device * const pdev = to_platform_device(dev);
+	struct excite_nand_drvdata *drvdata;	/* private driver data */
+	struct nand_chip *board_chip;	/* private flash chip data */
+	struct mtd_info *board_mtd;	/* mtd info for this board */
+	int scan_res;
+
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (unlikely(!drvdata)) {
+		printk(KERN_ERR "%s: no memory for drvdata\n",
+		       module_id);
+		return -ENOMEM;
+	}
+
+	/* bind private data into driver */
+	dev_set_drvdata(dev, drvdata);
+
+	/* allocate and map the resource */
+	drvdata->regs =
+		excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
+
+	if (unlikely(!drvdata->regs)) {
+		printk(KERN_ERR "%s: cannot reserve register region\n",
+		       module_id);
+		kfree(drvdata);
+		return -ENXIO;
+	}
+	
+	drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
+
+	/* initialise our chip */
+	board_chip = &drvdata->board_chip;
+	board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
+		drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
+	board_chip->cmd_ctrl = excite_nand_control;
+	board_chip->dev_ready = excite_nand_devready;
+	board_chip->chip_delay = 25;
+	board_chip->ecc.mode = NAND_ECC_SOFT;
+
+	/* link chip to mtd */
+	board_mtd = &drvdata->board_mtd;
+	board_mtd->priv = board_chip;
+
+	DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
+	scan_res = nand_scan(&drvdata->board_mtd, 1);
+
+	if (likely(!scan_res)) {
+		DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
+		add_mtd_partitions(&drvdata->board_mtd, partition_info,
+				   sizeof partition_info / sizeof partition_info[0]);
+	} else {
+		iounmap(drvdata->regs);
+		kfree(drvdata);
+		printk(KERN_ERR "%s: device scan failed\n", module_id);
+		return -EIO;
+	}
+	return 0;
+}
+
+static struct device_driver excite_nand_driver = {
+	.name = "excite_nand",
+	.bus = &platform_bus_type,
+	.probe = excite_nand_probe,
+	.remove = __exit_p(excite_nand_remove)
+};
+
+static int __init excite_nand_init(void)
+{
+	pr_info("Basler eXcite nand flash driver Version "
+		EXCITE_NANDFLASH_VERSION "\n");
+	return driver_register(&excite_nand_driver);
+}
+
+static void __exit excite_nand_exit(void)
+{
+	driver_unregister(&excite_nand_driver);
+}
+
+module_init(excite_nand_init);
+module_exit(excite_nand_exit);
+
+MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EXCITE_NANDFLASH_VERSION)

drivers/mtd/nand/nand_base.c

@@ -1272,10 +1272,25 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
 	      (unsigned long long)from, readlen);
 
-	if (ops->mode == MTD_OOB_RAW)
-		len = mtd->oobsize;
-	else
+	if (ops->mode == MTD_OOB_AUTO)
 		len = chip->ecc.layout->oobavail;
+	else
+		len = mtd->oobsize;
+
+	if (unlikely(ops->ooboffs >= len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt to start read outside oob\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(from >= mtd->size ||
+		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+					(from >> chip->page_shift)) * len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt read beyond end of device\n");
+		return -EINVAL;
+	}
 
 	chipnr = (int)(from >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
@@ -1742,19 +1757,40 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 			     struct mtd_oob_ops *ops)
 {
-	int chipnr, page, status;
+	int chipnr, page, status, len;
 	struct nand_chip *chip = mtd->priv;
 
 	DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
 	      (unsigned int)to, (int)ops->ooblen);
 
+	if (ops->mode == MTD_OOB_AUTO)
+		len = chip->ecc.layout->oobavail;
+	else
+		len = mtd->oobsize;
+
 	/* Do not allow write past end of page */
-	if ((ops->ooboffs + ops->ooblen) > mtd->oobsize) {
+	if ((ops->ooboffs + ops->ooblen) > len) {
 		DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
 		      "Attempt to write past end of page\n");
 		return -EINVAL;
 	}
 
+	if (unlikely(ops->ooboffs >= len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt to start write outside oob\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(to >= mtd->size ||
+		     ops->ooboffs + ops->ooblen >
+			((mtd->size >> chip->page_shift) -
+			 (to >> chip->page_shift)) * len)) {
+		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+			"Attempt write beyond end of device\n");
+		return -EINVAL;
+	}
+
 	chipnr = (int)(to >> chip->chip_shift);
 	chip->select_chip(mtd, chipnr);
 
@@ -2530,7 +2566,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 	/* Fill in remaining MTD driver data */
 	mtd->type = MTD_NANDFLASH;
 	mtd->flags = MTD_CAP_NANDFLASH;
-	mtd->ecctype = MTD_ECC_SW;
 	mtd->erase = nand_erase;
 	mtd->point = NULL;
 	mtd->unpoint = NULL;

drivers/mtd/nand/s3c2410.c

@@ -337,17 +337,69 @@ static int s3c2412_nand_devready(struct mtd_info *mtd)
 static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 				     u_char *read_ecc, u_char *calc_ecc)
 {
-	pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc);
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned int diff0, diff1, diff2;
+	unsigned int bit, byte;
 
-	pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
-		 read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+	pr_debug("%s(%p,%p,%p,%p)\n", __func__, mtd, dat, read_ecc, calc_ecc);
 
-	if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2])
-		return 0;
+	diff0 = read_ecc[0] ^ calc_ecc[0];
+	diff1 = read_ecc[1] ^ calc_ecc[1];
+	diff2 = read_ecc[2] ^ calc_ecc[2];
+
+	pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n",
+		 __func__,
+		 read_ecc[0], read_ecc[1], read_ecc[2],
+		 calc_ecc[0], calc_ecc[1], calc_ecc[2],
+		 diff0, diff1, diff2);
+
+	if (diff0 == 0 && diff1 == 0 && diff2 == 0)
+		return 0;		/* ECC is ok */
+
+	/* Can we correct this ECC (ie, one row and column change).
+	 * Note, this is similar to the 256 error code on smartmedia */
+
+	if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
+	    ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
+	    ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
+		/* calculate the bit position of the error */
+
+		bit  = (diff2 >> 2) & 1;
+		bit |= (diff2 >> 3) & 2;
+		bit |= (diff2 >> 4) & 4;
+
+		/* calculate the byte position of the error */
+
+		byte  = (diff1 << 1) & 0x80;
+		byte |= (diff1 << 2) & 0x40;
+		byte |= (diff1 << 3) & 0x20;
+		byte |= (diff1 << 4) & 0x10;
+
+		byte |= (diff0 >> 3) & 0x08;
+		byte |= (diff0 >> 2) & 0x04;
+		byte |= (diff0 >> 1) & 0x02;
+		byte |= (diff0 >> 0) & 0x01;
 
-	/* we curently have no method for correcting the error */
+		byte |= (diff2 << 8) & 0x100;
 
-	return -1;
+		dev_dbg(info->device, "correcting error bit %d, byte %d\n",
+			bit, byte);
+
+		dat[byte] ^= (1 << bit);
+		return 1;
+	}
+
+	/* if there is only one bit difference in the ECC, then
+	 * one of only a row or column parity has changed, which
+	 * means the error is most probably in the ECC itself */
+
+	diff0 |= (diff1 << 8);
+	diff0 |= (diff2 << 16);
+
+	if ((diff0 & ~(1<<fls(diff0))) == 0)
+		return 1;
+
+	return 0;
 }
 
 /* ECC functions
@@ -366,6 +418,15 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	writel(ctrl, info->regs + S3C2410_NFCONF);
 }
 
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ctrl;
+
+	ctrl = readl(info->regs + S3C2440_NFCONT);
+	writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+}
+
 static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -383,6 +444,21 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
 	ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
 
+	pr_debug("%s: returning ecc %02x%02x%02x\n", __func__,
+		 ecc_code[0], ecc_code[1], ecc_code[2]);
+
+	return 0;
+}
+
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+	ecc_code[0] = ecc;
+	ecc_code[1] = ecc >> 8;
+	ecc_code[2] = ecc >> 16;
+
 	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
 
 	return 0;
@@ -397,7 +473,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = ecc >> 8;
 	ecc_code[2] = ecc >> 16;
 
-	pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+	pr_debug("%s: returning ecc %06x\n", __func__, ecc);
 
 	return 0;
 }
@@ -565,6 +641,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 			break;
 
 		case TYPE_S3C2412:
+  			chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
+  			chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+			break;
+
 		case TYPE_S3C2440:
   			chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
   			chip->ecc.calculate = s3c2440_nand_calculate_ecc;

drivers/mtd/onenand/onenand_bbt.c

@@ -17,8 +17,8 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/compatmac.h>
 
-extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
-			       size_t *retlen, u_char *buf);
+extern int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+				struct mtd_oob_ops *ops);
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -65,10 +65,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	int startblock;
 	loff_t from;
 	size_t readlen, ooblen;
+	struct mtd_oob_ops ops;
 
 	printk(KERN_INFO "Scanning device for bad blocks\n");
 
-	len = 1;
+	len = 2;
 
 	/* We need only read few bytes from the OOB area */
 	scanlen = ooblen = 0;
@@ -82,22 +83,24 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	startblock = 0;
 	from = 0;
 
+	ops.mode = MTD_OOB_PLACE;
+	ops.ooblen = readlen;
+	ops.oobbuf = buf;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
+
 	for (i = startblock; i < numblocks; ) {
 		int ret;
 
 		for (j = 0; j < len; j++) {
-			size_t retlen;
-
 			/* No need to read pages fully,
 			 * just read required OOB bytes */
-			ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
-						  readlen, &retlen, &buf[0]);
+			ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
 
 			/* If it is a initial bad block, just ignore it */
-			if (ret && !(ret & ONENAND_CTRL_LOAD))
-				return ret;
+			if (ret == ONENAND_BBT_READ_FATAL_ERROR)
+				return -EIO;
 
-			if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+			if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
 				bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
 				printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
 					i >> 1, (unsigned int) from);
@@ -168,8 +171,8 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
  * marked good / bad blocks and writes the bad block table(s) to
  * the selected place.
  *
- * The bad block table memory is allocated here. It must be freed
- * by calling the onenand_free_bbt function.
+ * The bad block table memory is allocated here. It is freed
+ * by the onenand_release function.
  *
  */
 int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)

drivers/mtd/redboot.c

@@ -94,8 +94,19 @@ static int parse_redboot_partitions(struct mtd_info *master,
 			 * (NOTE: this is 'size' not 'data_length'; size is
 			 * the full size of the entry.)
 			 */
-			if (swab32(buf[i].size) == master->erasesize) {
+
+			/* RedBoot can combine the FIS directory and
+			   config partitions into a single eraseblock;
+			   we assume wrong-endian if either the swapped
+			   'size' matches the eraseblock size precisely,
+			   or if the swapped size actually fits in an
+			   eraseblock while the unswapped size doesn't. */
+			if (swab32(buf[i].size) == master->erasesize ||
+			    (buf[i].size > master->erasesize
+			     && swab32(buf[i].size) < master->erasesize)) {
 				int j;
+				/* Update numslots based on actual FIS directory size */
+				numslots = swab32(buf[i].size) / sizeof (struct fis_image_desc);
 				for (j = 0; j < numslots; ++j) {
 
 					/* A single 0xff denotes a deleted entry.
@@ -120,11 +131,11 @@ static int parse_redboot_partitions(struct mtd_info *master,
 					swab32s(&buf[j].desc_cksum);
 					swab32s(&buf[j].file_cksum);
 				}
+			} else if (buf[i].size < master->erasesize) {
+				/* Update numslots based on actual FIS directory size */
+				numslots = buf[i].size / sizeof(struct fis_image_desc);
 			}
 			break;
-		} else {
-			/* re-calculate of real numslots */
-			numslots = buf[i].size / sizeof(struct fis_image_desc);
 		}
 	}
 	if (i == numslots) {

fs/jffs2/build.c

@@ -348,23 +348,27 @@ int jffs2_do_mount_fs(struct jffs2_sb_info *c)
 
 	ret = jffs2_sum_init(c);
 	if (ret)
-		return ret;
+		goto out_free;
 
 	if (jffs2_build_filesystem(c)) {
 		dbg_fsbuild("build_fs failed\n");
 		jffs2_free_ino_caches(c);
 		jffs2_free_raw_node_refs(c);
-#ifndef __ECOS
-		if (jffs2_blocks_use_vmalloc(c))
-			vfree(c->blocks);
-		else
-#endif
-			kfree(c->blocks);
-
-		return -EIO;
+		ret = -EIO;
+		goto out_free;
 	}
 
 	jffs2_calc_trigger_levels(c);
 
 	return 0;
+
+ out_free:
+#ifndef __ECOS
+	if (jffs2_blocks_use_vmalloc(c))
+		vfree(c->blocks);
+	else
+#endif
+		kfree(c->blocks);
+
+	return ret;
 }

fs/jffs2/jffs2_fs_sb.h

@@ -98,20 +98,14 @@ struct jffs2_sb_info {
 	uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
 
 #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
-	/* Write-behind buffer for NAND flash */
-	unsigned char *wbuf;
-	unsigned char *oobbuf;
+	unsigned char *wbuf; /* Write-behind buffer for NAND flash */
 	uint32_t wbuf_ofs;
 	uint32_t wbuf_len;
 	struct jffs2_inodirty *wbuf_inodes;
-
 	struct rw_semaphore wbuf_sem;	/* Protects the write buffer */
 
-	/* Information about out-of-band area usage... */
-	struct nand_ecclayout *ecclayout;
-	uint32_t badblock_pos;
-	uint32_t fsdata_pos;
-	uint32_t fsdata_len;
+	unsigned char *oobbuf;
+	int oobavail; /* How many bytes are available for JFFS2 in OOB */
 #endif
 
 	struct jffs2_summary *summary;		/* Summary information */

fs/jffs2/scan.c

@@ -450,16 +450,20 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
 
 #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
 	if (jffs2_cleanmarker_oob(c)) {
-		int ret = jffs2_check_nand_cleanmarker(c, jeb);
+		int ret;
+
+		if (c->mtd->block_isbad(c->mtd, jeb->offset))
+			return BLK_STATE_BADBLOCK;
+
+		ret = jffs2_check_nand_cleanmarker(c, jeb);
 		D2(printk(KERN_NOTICE "jffs_check_nand_cleanmarker returned %d\n",ret));
+
 		/* Even if it's not found, we still scan to see
 		   if the block is empty. We use this information
 		   to decide whether to erase it or not. */
 		switch (ret) {
 		case 0:		cleanmarkerfound = 1; break;
 		case 1: 	break;
-		case 2: 	return BLK_STATE_BADBLOCK;
-		case 3:		return BLK_STATE_ALLDIRTY; /* Block has failed to erase min. once */
 		default: 	return ret;
 		}
 	}

fs/jffs2/wbuf.c

@@ -957,43 +957,48 @@ int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *re
 	return ret;
 }
 
-#define NR_OOB_SCAN_PAGES	4
+#define NR_OOB_SCAN_PAGES 4
+
+/* For historical reasons we use only 12 bytes for OOB clean marker */
+#define OOB_CM_SIZE 12
+
+static const struct jffs2_unknown_node oob_cleanmarker =
+{
+	.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK),
+	.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER),
+	.totlen = cpu_to_je32(8)
+};
 
 /*
- * Check, if the out of band area is empty
+ * Check, if the out of band area is empty. This function knows about the clean
+ * marker and if it is present in OOB, treats the OOB as empty anyway.
  */
 int jffs2_check_oob_empty(struct jffs2_sb_info *c,
 			  struct jffs2_eraseblock *jeb, int mode)
 {
-	int i, page, ret;
-	int oobsize = c->mtd->oobsize;
+	int i, ret;
+	int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
 	struct mtd_oob_ops ops;
 
-	ops.ooblen = NR_OOB_SCAN_PAGES * oobsize;
+	ops.mode = MTD_OOB_AUTO;
+	ops.ooblen = NR_OOB_SCAN_PAGES * c->oobavail;
 	ops.oobbuf = c->oobbuf;
-	ops.ooboffs = 0;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
 
 	ret = c->mtd->read_oob(c->mtd, jeb->offset, &ops);
-	if (ret) {
-		D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB "
-			  "failed %d for block at %08x\n", ret, jeb->offset));
+	if (ret || ops.oobretlen != ops.ooblen) {
+		printk(KERN_ERR "cannot read OOB for EB at %08x, requested %zd"
+				" bytes, read %zd bytes, error %d\n",
+				jeb->offset, ops.ooblen, ops.oobretlen, ret);
+		if (!ret)
+			ret = -EIO;
 		return ret;
 	}
 
-	if (ops.oobretlen < ops.ooblen) {
-		D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB "
-			  "returned short read (%zd bytes not %d) for block "
-			  "at %08x\n", ops.oobretlen, ops.ooblen, jeb->offset));
-		return -EIO;
-	}
-
-	/* Special check for first page */
-	for(i = 0; i < oobsize ; i++) {
-		/* Yeah, we know about the cleanmarker. */
-		if (mode && i >= c->fsdata_pos &&
-		    i < c->fsdata_pos + c->fsdata_len)
+	for(i = 0; i < ops.ooblen; i++) {
+		if (mode && i < cmlen)
+			/* Yeah, we know about the cleanmarker */
 			continue;
 
 		if (ops.oobbuf[i] != 0xFF) {
@@ -1003,111 +1008,63 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c,
 		}
 	}
 
-	/* we know, we are aligned :) */
-	for (page = oobsize; page < ops.ooblen; page += sizeof(long)) {
-		long dat = *(long *)(&ops.oobbuf[page]);
-		if(dat != -1)
-			return 1;
-	}
 	return 0;
 }
 
 /*
- * Scan for a valid cleanmarker and for bad blocks
+ * Check for a valid cleanmarker.
+ * Returns: 0 if a valid cleanmarker was found
+ *          1 if no cleanmarker was found
+ *          negative error code if an error occurred
  */
-int jffs2_check_nand_cleanmarker (struct jffs2_sb_info *c,
-				  struct jffs2_eraseblock *jeb)
+int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c,
+				 struct jffs2_eraseblock *jeb)
 {
-	struct jffs2_unknown_node n;
 	struct mtd_oob_ops ops;
-	int oobsize = c->mtd->oobsize;
-	unsigned char *p,*b;
-	int i, ret;
-	size_t offset = jeb->offset;
-
-	/* Check first if the block is bad. */
-	if (c->mtd->block_isbad(c->mtd, offset)) {
-		D1 (printk(KERN_WARNING "jffs2_check_nand_cleanmarker()"
-			   ": Bad block at %08x\n", jeb->offset));
-		return 2;
-	}
+	int ret, cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
 
-	ops.ooblen = oobsize;
+	ops.mode = MTD_OOB_AUTO;
+	ops.ooblen = cmlen;
 	ops.oobbuf = c->oobbuf;
-	ops.ooboffs = 0;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
 
-	ret = c->mtd->read_oob(c->mtd, offset, &ops);
-	if (ret) {
-		D1 (printk(KERN_WARNING "jffs2_check_nand_cleanmarker(): "
-			   "Read OOB failed %d for block at %08x\n",
-			   ret, jeb->offset));
+	ret = c->mtd->read_oob(c->mtd, jeb->offset, &ops);
+	if (ret || ops.oobretlen != ops.ooblen) {
+		printk(KERN_ERR "cannot read OOB for EB at %08x, requested %zd"
+				" bytes, read %zd bytes, error %d\n",
+				jeb->offset, ops.ooblen, ops.oobretlen, ret);
+		if (!ret)
+			ret = -EIO;
 		return ret;
 	}
 
-	if (ops.oobretlen < ops.ooblen) {
-		D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker(): "
-			    "Read OOB return short read (%zd bytes not %d) "
-			    "for block at %08x\n", ops.oobretlen, ops.ooblen,
-			    jeb->offset));
-		return -EIO;
-	}
-
-	n.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
-	n.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
-	n.totlen = cpu_to_je32 (8);
-	p = (unsigned char *) &n;
-	b = c->oobbuf + c->fsdata_pos;
-
-	for (i = c->fsdata_len; i; i--) {
-		if (*b++ != *p++)
-			ret = 1;
-	}
-
-	D1(if (ret == 1) {
-		printk(KERN_WARNING "jffs2_check_nand_cleanmarker(): "
-		       "Cleanmarker node not detected in block at %08x\n",
-		       offset);
-		printk(KERN_WARNING "OOB at %08zx was ", offset);
-		for (i=0; i < oobsize; i++)
-			printk("%02x ", c->oobbuf[i]);
-		printk("\n");
-	});
-	return ret;
+	return !!memcmp(&oob_cleanmarker, c->oobbuf, cmlen);
 }
 
 int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c,
 				 struct jffs2_eraseblock *jeb)
 {
-	struct jffs2_unknown_node n;
-	int	ret;
+	int ret;
 	struct mtd_oob_ops ops;
+	int cmlen = min_t(int, c->oobavail, OOB_CM_SIZE);
 
-	n.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
-	n.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
-	n.totlen = cpu_to_je32(8);
-
-	ops.ooblen = c->fsdata_len;
-	ops.oobbuf = (uint8_t *)&n;
-	ops.ooboffs = c->fsdata_pos;
+	ops.mode = MTD_OOB_AUTO;
+	ops.ooblen = cmlen;
+	ops.oobbuf = (uint8_t *)&oob_cleanmarker;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OOB_PLACE;
 
 	ret = c->mtd->write_oob(c->mtd, jeb->offset, &ops);
-
-	if (ret) {
-		D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): "
-			  "Write failed for block at %08x: error %d\n",
-			  jeb->offset, ret));
+	if (ret || ops.oobretlen != ops.ooblen) {
+		printk(KERN_ERR "cannot write OOB for EB at %08x, requested %zd"
+				" bytes, read %zd bytes, error %d\n",
+				jeb->offset, ops.ooblen, ops.oobretlen, ret);
+		if (!ret)
+			ret = -EIO;
 		return ret;
 	}
-	if (ops.oobretlen != ops.ooblen) {
-		D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): "
-			  "Short write for block at %08x: %zd not %d\n",
-			  jeb->offset, ops.oobretlen, ops.ooblen));
-		return -EIO;
-	}
+
 	return 0;
 }
 
@@ -1140,41 +1097,24 @@ int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *
 	return 1;
 }
 
-static int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c)
+int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
 {
 	struct nand_ecclayout *oinfo = c->mtd->ecclayout;
 
-	/* Do this only, if we have an oob buffer */
 	if (!c->mtd->oobsize)
 		return 0;
 
 	/* Cleanmarker is out-of-band, so inline size zero */
 	c->cleanmarker_size = 0;
 
-	/* Should we use autoplacement ? */
-	if (!oinfo) {
-		D1(printk(KERN_DEBUG "JFFS2 on NAND. No autoplacment info found\n"));
+	if (!oinfo || oinfo->oobavail == 0) {
+		printk(KERN_ERR "inconsistent device description\n");
 		return -EINVAL;
 	}
 
-	D1(printk(KERN_DEBUG "JFFS2 using autoplace on NAND\n"));
-	/* Get the position of the free bytes */
-	if (!oinfo->oobfree[0].length) {
-		printk (KERN_WARNING "jffs2_nand_set_oobinfo(): Eeep."
-			" Autoplacement selected and no empty space in oob\n");
-		return -ENOSPC;
-	}
-	c->fsdata_pos = oinfo->oobfree[0].offset;
-	c->fsdata_len = oinfo->oobfree[0].length;
-	if (c->fsdata_len > 8)
-		c->fsdata_len = 8;
+	D1(printk(KERN_DEBUG "JFFS2 using OOB on NAND\n"));
 
-	return 0;
-}
-
-int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
-{
-	int res;
+	c->oobavail = oinfo->oobavail;
 
 	/* Initialise write buffer */
 	init_rwsem(&c->wbuf_sem);
@@ -1185,22 +1125,13 @@ int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
 	if (!c->wbuf)
 		return -ENOMEM;
 
-	c->oobbuf = kmalloc(NR_OOB_SCAN_PAGES * c->mtd->oobsize, GFP_KERNEL);
-	if (!c->oobbuf)
-		return -ENOMEM;
-
-	res = jffs2_nand_set_oobinfo(c);
-
-#ifdef BREAKME
-	if (!brokenbuf)
-		brokenbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
-	if (!brokenbuf) {
+	c->oobbuf = kmalloc(NR_OOB_SCAN_PAGES * c->oobavail, GFP_KERNEL);
+	if (!c->oobbuf) {
 		kfree(c->wbuf);
 		return -ENOMEM;
 	}
-	memset(brokenbuf, 0xdb, c->wbuf_pagesize);
-#endif
-	return res;
+
+	return 0;
 }
 
 void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)

include/linux/mtd/bbm.h

@@ -92,6 +92,13 @@ struct nand_bbt_descr {
  */
 #define ONENAND_BADBLOCK_POS	0
 
+/*
+ * Bad block scanning errors
+ */
+#define ONENAND_BBT_READ_ERROR		1
+#define ONENAND_BBT_READ_ECC_ERROR	2
+#define ONENAND_BBT_READ_FATAL_ERROR	4
+
 /**
  * struct bbm_info - [GENERIC] Bad Block Table data structure
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry

include/linux/mtd/map.h

@@ -183,7 +183,7 @@ typedef union {
 struct map_info {
 	char *name;
 	unsigned long size;
-	unsigned long phys;
+	resource_size_t phys;
 #define NO_XIP (-1UL)
 
 	void __iomem *virt;

include/linux/mtd/mtd.h

@@ -85,6 +85,10 @@ typedef enum {
  *		mode = MTD_OOB_PLACE)
  * @datbuf:	data buffer - if NULL only oob data are read/written
  * @oobbuf:	oob data buffer
+ *
+ * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * The interface assumes that the OOB write requests program only one page's
+ * OOB area.
  */
 struct mtd_oob_ops {
 	mtd_oob_mode_t	mode;
@@ -117,18 +121,6 @@ struct mtd_info {
 	u_int32_t writesize;
 
 	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
-	u_int32_t ecctype;
-	u_int32_t eccsize;
-
-	/*
-	 * Reuse some of the above unused fields in the case of NOR flash
-	 * with configurable programming regions to avoid modifying the
-	 * user visible structure layout/size.  Only valid when the
-	 * MTD_PROGRAM_REGIONS flag is set.
-	 * (Maybe we should have an union for those?)
-	 */
-#define MTD_PROGREGION_CTRLMODE_VALID(mtd)  (mtd)->oobsize
-#define MTD_PROGREGION_CTRLMODE_INVALID(mtd)  (mtd)->ecctype
 
 	// Kernel-only stuff starts here.
 	char *name;

include/linux/mtd/nand.h

@@ -343,6 +343,7 @@ struct nand_buffers {
  * @options:		[BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
  *			special functionality. See the defines for further explanation
  * @badblockpos:	[INTERN] position of the bad block marker in the oob area
+ * @cellinfo:		[INTERN] MLC/multichip data from chip ident
  * @numchips:		[INTERN] number of physical chips
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
  * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1

include/linux/mtd/onenand.h

 /*
  *  linux/include/linux/mtd/onenand.h
  *
- *  Copyright (C) 2005-2006 Samsung Electronics
+ *  Copyright (C) 2005-2007 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -42,14 +42,10 @@ typedef enum {
 
 /**
  * struct onenand_bufferram - OneNAND BufferRAM Data
- * @block:		block address in BufferRAM
- * @page:		page address in BufferRAM
- * @valid:		valid flag
+ * @blockpage:		block & page address in BufferRAM
  */
 struct onenand_bufferram {
-	int block;
-	int page;
-	int valid;
+	int	blockpage;
 };
 
 /**
@@ -63,7 +59,6 @@ struct onenand_bufferram {
  *			partly be set to inform onenand_scan about
  * @erase_shift:	[INTERN] number of address bits in a block
  * @page_shift:		[INTERN] number of address bits in a page
- * @ppb_shift:		[INTERN] number of address bits in a pages per block
  * @page_mask:		[INTERN] a page per block mask
  * @bufferram_index:	[INTERN] BufferRAM index
  * @bufferram:		[INTERN] BufferRAM info
@@ -103,7 +98,6 @@ struct onenand_chip {
 
 	unsigned int		erase_shift;
 	unsigned int		page_shift;
-	unsigned int		ppb_shift;	/* Pages per block shift */
 	unsigned int		page_mask;
 
 	unsigned int		bufferram_index;
@@ -150,6 +144,9 @@ struct onenand_chip {
 #define ONENAND_SET_SYS_CFG1(v, this)					\
 	(this->write_word(v, this->base + ONENAND_REG_SYS_CFG1))
 
+#define ONENAND_IS_DDP(this)						\
+	(this->device_id & ONENAND_DEVICE_IS_DDP)
+
 /* Check byte access in OneNAND */
 #define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
 

include/linux/mtd/onenand_regs.h

@@ -3,7 +3,8 @@
  *
  *  OneNAND Register header file
  *
- *  Copyright (C) 2005-2006 Samsung Electronics
+ *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -80,9 +81,11 @@
 #define ONENAND_VERSION_PROCESS_SHIFT	(8)
 
 /*
- * Start Address 1 F100h (R/W)
+ * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
  */
 #define ONENAND_DDP_SHIFT		(15)
+#define ONENAND_DDP_CHIP0		(0)
+#define ONENAND_DDP_CHIP1		(1 << ONENAND_DDP_SHIFT)
 
 /*
  * Start Address 8 F107h (R/W)

include/linux/mtd/physmap.h

@@ -18,9 +18,10 @@
 #define __LINUX_MTD_PHYSMAP__
 
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 
+struct map_info;
+
 struct physmap_flash_data {
 	unsigned int		width;
 	void			(*set_vpp)(struct map_info *, int);

include/mtd/mtd-abi.h

@@ -36,12 +36,6 @@ struct mtd_oob_buf {
 #define MTD_CAP_NORFLASH	(MTD_WRITEABLE | MTD_BIT_WRITEABLE)
 #define MTD_CAP_NANDFLASH	(MTD_WRITEABLE)
 
-
-// Types of automatic ECC/Checksum available
-#define MTD_ECC_NONE		0 	// No automatic ECC available
-#define MTD_ECC_RS_DiskOnChip	1	// Automatic ECC on DiskOnChip
-#define MTD_ECC_SW		2	// SW ECC for Toshiba & Samsung devices
-
 /* ECC byte placement */
 #define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
 #define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
@@ -61,6 +55,8 @@ struct mtd_info_user {
 	uint32_t erasesize;
 	uint32_t writesize;
 	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	/* The below two fields are obsolete and broken, do not use them
+	 * (TODO: remove at some point) */
 	uint32_t ecctype;
 	uint32_t eccsize;
 };