media: vivid: add CEC support to display present ctrl

Set/invalidate physical addresses based on the configuration of the
display present control. This is relevant not only when the display
present control is modified, but also when the Vivid instance EDID is
set/cleared.
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/vivid/vivid-ctrls.c

@@ -18,6 +18,7 @@
 #include "vivid-radio-common.h"
 #include "vivid-osd.h"
 #include "vivid-ctrls.h"
+#include "vivid-cec.h"
 
 #define VIVID_CID_CUSTOM_BASE		(V4L2_CID_USER_BASE | 0xf000)
 #define VIVID_CID_BUTTON		(VIVID_CID_CUSTOM_BASE + 0)
@@ -925,7 +926,7 @@ static int vivid_vid_out_s_ctrl(struct v4l2_ctrl *ctrl)
 	struct vivid_dev *dev = container_of(ctrl->handler, struct vivid_dev, ctrl_hdl_vid_out);
 	struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt;
 	u32 display_present = 0;
-	unsigned int i, j;
+	unsigned int i, j, bus_idx;
 
 	switch (ctrl->id) {
 	case VIVID_CID_HAS_CROP_OUT:
@@ -964,15 +965,31 @@ static int vivid_vid_out_s_ctrl(struct v4l2_ctrl *ctrl)
 			break;
 
 		dev->display_present[dev->output] = ctrl->val;
-
 		for (i = 0, j = 0; i < dev->num_outputs; i++)
 			if (dev->output_type[i] == HDMI)
 				display_present |=
 					dev->display_present[i] << j++;
 
-		__v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
 		__v4l2_ctrl_s_ctrl(dev->ctrl_tx_rxsense, display_present);
-		__v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
+
+		if (dev->edid_blocks) {
+			__v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present,
+					   display_present);
+			__v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug,
+					   display_present);
+		}
+
+		bus_idx = dev->cec_output2bus_map[dev->output];
+		if (!dev->cec_tx_adap[bus_idx])
+			break;
+
+		if (ctrl->val && dev->edid_blocks)
+			cec_s_phys_addr(dev->cec_tx_adap[bus_idx],
+					dev->cec_tx_adap[bus_idx]->phys_addr,
+					false);
+		else
+			cec_phys_addr_invalidate(dev->cec_tx_adap[bus_idx]);
+
 		break;
 	}
 	return 0;

drivers/media/platform/vivid/vivid-vid-cap.c

@@ -1748,7 +1748,8 @@ int vidioc_s_edid(struct file *file, void *_fh,
 {
 	struct vivid_dev *dev = video_drvdata(file);
 	u16 phys_addr;
-	unsigned int i;
+	u32 display_present = 0;
+	unsigned int i, j;
 	int ret;
 
 	memset(edid->reserved, 0, sizeof(edid->reserved));
@@ -1758,6 +1759,8 @@ int vidioc_s_edid(struct file *file, void *_fh,
 		return -EINVAL;
 	if (edid->blocks == 0) {
 		dev->edid_blocks = 0;
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
 		phys_addr = CEC_PHYS_ADDR_INVALID;
 		goto set_phys_addr;
 	}
@@ -1776,13 +1779,23 @@ int vidioc_s_edid(struct file *file, void *_fh,
 	dev->edid_blocks = edid->blocks;
 	memcpy(dev->edid, edid->edid, edid->blocks * 128);
 
+	for (i = 0, j = 0; i < dev->num_outputs; i++)
+		if (dev->output_type[i] == HDMI)
+			display_present |=
+				dev->display_present[i] << j++;
+
+	v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
+	v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+
 set_phys_addr:
 	/* TODO: a proper hotplug detect cycle should be emulated here */
 	cec_s_phys_addr(dev->cec_rx_adap, phys_addr, false);
 
 	for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
 		cec_s_phys_addr(dev->cec_tx_adap[i],
-				v4l2_phys_addr_for_input(phys_addr, i + 1),
+				dev->display_present[i] ?
+				v4l2_phys_addr_for_input(phys_addr, i + 1) :
+				CEC_PHYS_ADDR_INVALID,
 				false);
 	return 0;
 }

drivers/media/platform/vivid/vivid-vid-common.c

@@ -887,6 +887,8 @@ int vidioc_g_edid(struct file *file, void *_fh,
 			return -EINVAL;
 		if (dev->output_type[edid->pad] != HDMI)
 			return -EINVAL;
+		if (!dev->display_present[edid->pad])
+			return -ENODATA;
 		bus_idx = dev->cec_output2bus_map[edid->pad];
 		adap = dev->cec_tx_adap[bus_idx];
 	}