aacraid: MSI-x support

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

drivers/scsi/aacraid/aacraid.h

@@ -6,11 +6,61 @@
 #define nblank(x) _nblank(x)[0]
 
 #include <linux/interrupt.h>
+#include <linux/pci.h>
 
 /*------------------------------------------------------------------------------
  *              D E F I N E S
  *----------------------------------------------------------------------------*/
 
+#define AAC_MAX_MSIX		32	/* vectors */
+#define AAC_PCI_MSI_ENABLE	0x8000
+
+enum {
+	AAC_ENABLE_INTERRUPT	= 0x0,
+	AAC_DISABLE_INTERRUPT,
+	AAC_ENABLE_MSIX,
+	AAC_DISABLE_MSIX,
+	AAC_CLEAR_AIF_BIT,
+	AAC_CLEAR_SYNC_BIT,
+	AAC_ENABLE_INTX
+};
+
+#define AAC_INT_MODE_INTX		(1<<0)
+#define AAC_INT_MODE_MSI		(1<<1)
+#define AAC_INT_MODE_AIF		(1<<2)
+#define AAC_INT_MODE_SYNC		(1<<3)
+
+#define AAC_INT_ENABLE_TYPE1_INTX	0xfffffffb
+#define AAC_INT_ENABLE_TYPE1_MSIX	0xfffffffa
+#define AAC_INT_DISABLE_ALL		0xffffffff
+
+/* Bit definitions in IOA->Host Interrupt Register */
+#define PMC_TRANSITION_TO_OPERATIONAL	(1<<31)
+#define PMC_IOARCB_TRANSFER_FAILED	(1<<28)
+#define PMC_IOA_UNIT_CHECK		(1<<27)
+#define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26)
+#define PMC_CRITICAL_IOA_OP_IN_PROGRESS	(1<<25)
+#define PMC_IOARRIN_LOST		(1<<4)
+#define PMC_SYSTEM_BUS_MMIO_ERROR	(1<<3)
+#define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2)
+#define PMC_HOST_RRQ_VALID		(1<<1)
+#define PMC_OPERATIONAL_STATUS		(1<<31)
+#define PMC_ALLOW_MSIX_VECTOR0		(1<<0)
+
+#define PMC_IOA_ERROR_INTERRUPTS	(PMC_IOARCB_TRANSFER_FAILED | \
+					 PMC_IOA_UNIT_CHECK | \
+					 PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \
+					 PMC_IOARRIN_LOST | \
+					 PMC_SYSTEM_BUS_MMIO_ERROR | \
+					 PMC_IOA_PROCESSOR_IN_ERROR_STATE)
+
+#define PMC_ALL_INTERRUPT_BITS		(PMC_IOA_ERROR_INTERRUPTS | \
+					 PMC_HOST_RRQ_VALID | \
+					 PMC_TRANSITION_TO_OPERATIONAL | \
+					 PMC_ALLOW_MSIX_VECTOR0)
+#define	PMC_GLOBAL_INT_BIT2		0x00000004
+#define	PMC_GLOBAL_INT_BIT0		0x00000001
+
 #ifndef AAC_DRIVER_BUILD
 # define AAC_DRIVER_BUILD 30300
 # define AAC_DRIVER_BRANCH "-ms"
@@ -36,6 +86,7 @@
 #define CONTAINER_TO_ID(cont)		(cont)
 #define CONTAINER_TO_LUN(cont)		(0)
 
+#define PMC_DEVICE_S6	0x28b
 #define PMC_DEVICE_S7	0x28c
 #define PMC_DEVICE_S8	0x28d
 #define PMC_DEVICE_S9	0x28f
@@ -434,7 +485,7 @@ enum fib_xfer_state {
 struct aac_init
 {
 	__le32	InitStructRevision;
-	__le32	MiniPortRevision;
+	__le32	Sa_MSIXVectors;
 	__le32	fsrev;
 	__le32	CommHeaderAddress;
 	__le32	FastIoCommAreaAddress;
@@ -755,7 +806,8 @@ struct rkt_registers {
 
 struct src_mu_registers {
 				/*	PCI*| Name */
-	__le32	reserved0[8];	/*	00h | Reserved */
+	__le32	reserved0[6];	/*	00h | Reserved */
+	__le32	IOAR[2];	/*	18h | IOA->host interrupt register */
 	__le32	IDR;		/*	20h | Inbound Doorbell Register */
 	__le32	IISR;		/*	24h | Inbound Int. Status Register */
 	__le32	reserved1[3];	/*	28h | Reserved */
@@ -767,17 +819,18 @@ struct src_mu_registers {
 	__le32	OMR;		/*	bch | Outbound Message Register */
 	__le32	IQ_L;		/*  c0h | Inbound Queue (Low address) */
 	__le32	IQ_H;		/*  c4h | Inbound Queue (High address) */
+	__le32	ODR_MSI;	/*  c8h | MSI register for sync./AIF */
 };
 
 struct src_registers {
-	struct src_mu_registers MUnit;	/* 00h - c7h */
+	struct src_mu_registers MUnit;	/* 00h - cbh */
 	union {
 		struct {
-			__le32 reserved1[130790];	/* c8h - 7fc5fh */
+			__le32 reserved1[130789];	/* cch - 7fc5fh */
 			struct src_inbound IndexRegs;	/* 7fc60h */
 		} tupelo;
 		struct {
-			__le32 reserved1[974];		/* c8h - fffh */
+			__le32 reserved1[973];		/* cch - fffh */
 			struct src_inbound IndexRegs;	/* 1000h */
 		} denali;
 	} u;
@@ -1029,6 +1082,11 @@ struct aac_bus_info_response {
 #define AAC_OPT_NEW_COMM_TYPE3		cpu_to_le32(1<<30)
 #define AAC_OPT_NEW_COMM_TYPE4		cpu_to_le32(1<<31)
 
+/* MSIX context */
+struct aac_msix_ctx {
+	int		vector_no;
+	struct aac_dev	*dev;
+};
 
 struct aac_dev
 {
@@ -1084,8 +1142,10 @@ struct aac_dev
 						 * if AAC_COMM_MESSAGE_TYPE1 */
 
 	dma_addr_t		host_rrq_pa;	/* phys. address */
-	u32			host_rrq_idx;	/* index into rrq buffer */
-
+	/* index into rrq buffer */
+	u32			host_rrq_idx[AAC_MAX_MSIX];
+	atomic_t		rrq_outstanding[AAC_MAX_MSIX];
+	u32			fibs_pushed_no;
 	struct pci_dev		*pdev;		/* Our PCI interface */
 	void *			printfbuf;	/* pointer to buffer used for printf's from the adapter */
 	void *			comm_addr;	/* Base address of Comm area */
@@ -1154,6 +1214,11 @@ struct aac_dev
 	int			sync_mode;
 	struct fib		*sync_fib;
 	struct list_head	sync_fib_list;
+	u32			max_msix;	/* max. MSI-X vectors */
+	u32			vector_cap;	/* MSI-X vector capab.*/
+	int			msi_enabled;	/* MSI/MSI-X enabled */
+	struct msix_entry	msixentry[AAC_MAX_MSIX];
+	struct aac_msix_ctx	aac_msix[AAC_MAX_MSIX]; /* context */
 };
 
 #define aac_adapter_interrupt(dev) \
@@ -2036,6 +2101,7 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
 int aac_fib_complete(struct fib * context);
 #define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
 struct aac_dev *aac_init_adapter(struct aac_dev *dev);
+void aac_src_access_devreg(struct aac_dev *dev, int mode);
 int aac_get_config_status(struct aac_dev *dev, int commit_flag);
 int aac_get_containers(struct aac_dev *dev);
 int aac_scsi_cmd(struct scsi_cmnd *cmd);

drivers/scsi/aacraid/comminit.c

@@ -43,6 +43,8 @@
 
 #include "aacraid.h"
 
+static void aac_define_int_mode(struct aac_dev *dev);
+
 struct aac_common aac_config = {
 	.irq_mod = 1
 };
@@ -91,7 +93,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 	init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
 	if (dev->max_fib_size != sizeof(struct hw_fib))
 		init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
-	init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION);
+	init->Sa_MSIXVectors = cpu_to_le32(Sa_MINIPORT_REVISION);
 	init->fsrev = cpu_to_le32(dev->fsrev);
 
 	/*
@@ -140,7 +142,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
 			INITFLAGS_NEW_COMM_TYPE2_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED);
 		init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32));
 		init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff));
-		init->MiniPortRevision = cpu_to_le32(0L);		/* number of MSI-X */
+		/* number of MSI-X */
+		init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
 		dprintk((KERN_WARNING"aacraid: New Comm Interface type2 enabled\n"));
 	}
 
@@ -228,6 +231,11 @@ int aac_send_shutdown(struct aac_dev * dev)
 	/* FIB should be freed only after getting the response from the F/W */
 	if (status != -ERESTARTSYS)
 		aac_fib_free(fibctx);
+	if ((dev->pdev->device == PMC_DEVICE_S7 ||
+	     dev->pdev->device == PMC_DEVICE_S8 ||
+	     dev->pdev->device == PMC_DEVICE_S9) &&
+	     dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_INTX);
 	return status;
 }
 
@@ -388,6 +396,8 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 			}
 		}
 	}
+	dev->max_msix = 0;
+	dev->msi_enabled = 0;
 	if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
 	  0, 0, 0, 0, 0, 0,
 	  status+0, status+1, status+2, status+3, status+4))
@@ -461,6 +471,11 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	if (host->can_queue > AAC_NUM_IO_FIB)
 		host->can_queue = AAC_NUM_IO_FIB;
 
+	if (dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->pdev->device == PMC_DEVICE_S7 ||
+	    dev->pdev->device == PMC_DEVICE_S8 ||
+	    dev->pdev->device == PMC_DEVICE_S9)
+		aac_define_int_mode(dev);
 	/*
 	 *	Ok now init the communication subsystem
 	 */
@@ -489,4 +504,78 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	return dev;
 }
 
+static void aac_define_int_mode(struct aac_dev *dev)
+{
+
+	int i, msi_count;
+
+	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
+	if (dev->max_msix == 0 ||
+	    dev->pdev->device == PMC_DEVICE_S6 ||
+	    dev->sync_mode) {
+		dev->max_msix = 1;
+		dev->vector_cap =
+			dev->scsi_host_ptr->can_queue +
+			AAC_NUM_MGT_FIB;
+		return;
+	}
+
+	msi_count = min(dev->max_msix,
+		(unsigned int)num_online_cpus());
+
+	dev->max_msix = msi_count;
+
+	if (msi_count > AAC_MAX_MSIX)
+		msi_count = AAC_MAX_MSIX;
+
+	for (i = 0; i < msi_count; i++)
+		dev->msixentry[i].entry = i;
+
+	if (msi_count > 1 &&
+	    pci_find_capability(dev->pdev, PCI_CAP_ID_MSIX)) {
+		i = pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count);
+		 /* Check how many MSIX vectors are allocated */
+		if (i >= 0) {
+			dev->msi_enabled = 1;
+			if (i) {
+				msi_count = i;
+				if (pci_enable_msix(dev->pdev,
+				    dev->msixentry,
+				    msi_count)) {
+					dev->msi_enabled = 0;
+					printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+							dev->name, dev->id, i);
+				}
+			}
+		} else {
+			dev->msi_enabled = 0;
+			printk(KERN_ERR "%s%d: MSIX not supported!! Will try MSI 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled) {
+		msi_count = 1;
+		i = pci_enable_msi(dev->pdev);
 
+		if (!i) {
+			dev->msi_enabled = 1;
+			dev->msi = 1;
+		} else {
+			printk(KERN_ERR "%s%d: MSI not supported!! Will try INTx 0x%x.\n",
+					dev->name, dev->id, i);
+		}
+	}
+
+	if (!dev->msi_enabled)
+		dev->max_msix = msi_count = 1;
+	else {
+		if (dev->max_msix > msi_count)
+			dev->max_msix = msi_count;
+	}
+	dev->vector_cap =
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) /
+		msi_count;
+}

drivers/scsi/aacraid/commsup.c

@@ -868,7 +868,7 @@ void aac_printf(struct aac_dev *dev, u32 val)
  *	dispatches it to the appropriate routine for handling.
  */
 
-#define AIF_SNIFF_TIMEOUT	(30*HZ)
+#define AIF_SNIFF_TIMEOUT	(500*HZ)
 static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 {
 	struct hw_fib * hw_fib = fibptr->hw_fib_va;
@@ -1251,7 +1251,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 {
 	int index, quirks;
-	int retval;
+	int retval, i;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
 	struct scsi_cmnd *command;
@@ -1319,7 +1319,21 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced)
 	aac->comm_phys = 0;
 	kfree(aac->queues);
 	aac->queues = NULL;
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					 &(aac->aac_msix[i]));
+			pci_disable_msix(aac->pdev);
+		} else {
+			free_irq(aac->pdev->irq, &(aac->aac_msix[0]));
+		}
+	} else {
 		free_irq(aac->pdev->irq, aac);
+	}
 	if (aac->msi)
 		pci_disable_msi(aac->pdev);
 	kfree(aac->fsa_dev);

drivers/scsi/aacraid/dpcsup.c

@@ -389,8 +389,13 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
 			 *	NOTE:  we cannot touch the fib after this
 			 *	    call, because it may have been deallocated.
 			 */
+			if (likely(fib->callback && fib->callback_data)) {
 				fib->flags &= FIB_CONTEXT_FLAG_FASTRESP;
 				fib->callback(fib->callback_data, fib);
+			} else {
+				aac_fib_complete(fib);
+				aac_fib_free(fib);
+			}
 		} else {
 			unsigned long flagv;
 	  		dprintk((KERN_INFO "event_wait up\n"));

drivers/scsi/aacraid/linit.c

@@ -1082,6 +1082,8 @@ static struct scsi_host_template aac_driver_template = {
 
 static void __aac_shutdown(struct aac_dev * aac)
 {
+	int i;
+
 	if (aac->aif_thread) {
 		int i;
 		/* Clear out events first */
@@ -1095,9 +1097,25 @@ static void __aac_shutdown(struct aac_dev * aac)
 	}
 	aac_send_shutdown(aac);
 	aac_adapter_disable_int(aac);
+	if (aac->pdev->device == PMC_DEVICE_S6 ||
+	    aac->pdev->device == PMC_DEVICE_S7 ||
+	    aac->pdev->device == PMC_DEVICE_S8 ||
+	    aac->pdev->device == PMC_DEVICE_S9) {
+		if (aac->max_msix > 1) {
+			for (i = 0; i < aac->max_msix; i++)
+				free_irq(aac->msixentry[i].vector,
+					 &(aac->aac_msix[i]));
+		} else {
+			free_irq(aac->pdev->irq,
+				 &(aac->aac_msix[0]));
+		}
+	} else {
 		free_irq(aac->pdev->irq, aac);
+	}
 	if (aac->msi)
 		pci_disable_msi(aac->pdev);
+	else if (aac->max_msix > 1)
+		pci_disable_msix(aac->pdev);
 }
 
 static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)