Commit 49641116 authored by Taneja, Archit's avatar Taneja, Archit Committed by Tomi Valkeinen

OMAP: DSS2: FEATURES: DSI PLL parameter cleanup

The DSI PLL parameters (regm, regn, regm_dispc, regm_dsi, fint) have different
fields and also different Max values on OMAP3 and OMAP4. Use dss features to
calculate the register fields and min/max values based on current OMAP revision.
Signed-off-by: default avatarArchit Taneja <archit@ti.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent 31ef8237
......@@ -185,14 +185,6 @@ struct dsi_reg { u16 idx; };
#define DSI_DT_RX_SHORT_READ_1 0x21
#define DSI_DT_RX_SHORT_READ_2 0x22
#define FINT_MAX 2100000
#define FINT_MIN 750000
#define REGN_MAX (1 << 7)
#define REGM_MAX ((1 << 11) - 1)
#define REGM_DISPC_MAX (1 << 4)
#define REGM_DSI_MAX (1 << 4)
#define LP_DIV_MAX ((1 << 13) - 1)
enum fifo_size {
DSI_FIFO_SIZE_0 = 0,
DSI_FIFO_SIZE_32 = 1,
......@@ -277,6 +269,11 @@ static struct
spinlock_t irq_stats_lock;
struct dsi_irq_stats irq_stats;
#endif
/* DSI PLL Parameter Ranges */
unsigned long regm_max, regn_max;
unsigned long regm_dispc_max, regm_dsi_max;
unsigned long fint_min, fint_max;
unsigned long lpdiv_max;
} dsi;
#ifdef DEBUG
......@@ -751,7 +748,7 @@ static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev)
lp_clk_div = dssdev->phy.dsi.div.lp_clk_div;
if (lp_clk_div == 0 || lp_clk_div > LP_DIV_MAX)
if (lp_clk_div == 0 || lp_clk_div > dsi.lpdiv_max)
return -EINVAL;
dsi_fclk = dsi_fclk_rate();
......@@ -801,16 +798,16 @@ static int dsi_pll_power(enum dsi_pll_power_state state)
static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
struct dsi_clock_info *cinfo)
{
if (cinfo->regn == 0 || cinfo->regn > REGN_MAX)
if (cinfo->regn == 0 || cinfo->regn > dsi.regn_max)
return -EINVAL;
if (cinfo->regm == 0 || cinfo->regm > REGM_MAX)
if (cinfo->regm == 0 || cinfo->regm > dsi.regm_max)
return -EINVAL;
if (cinfo->regm_dispc > REGM_DISPC_MAX)
if (cinfo->regm_dispc > dsi.regm_dispc_max)
return -EINVAL;
if (cinfo->regm_dsi > REGM_DSI_MAX)
if (cinfo->regm_dsi > dsi.regm_dsi_max)
return -EINVAL;
if (cinfo->use_sys_clk) {
......@@ -829,7 +826,7 @@ static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1));
if (cinfo->fint > FINT_MAX || cinfo->fint < FINT_MIN)
if (cinfo->fint > dsi.fint_max || cinfo->fint < dsi.fint_min)
return -EINVAL;
cinfo->clkin4ddr = 2 * cinfo->regm * cinfo->fint;
......@@ -899,17 +896,17 @@ int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck,
/* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */
/* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */
/* To reduce PLL lock time, keep Fint high (around 2 MHz) */
for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) {
for (cur.regn = 1; cur.regn < dsi.regn_max; ++cur.regn) {
if (cur.highfreq == 0)
cur.fint = cur.clkin / cur.regn;
else
cur.fint = cur.clkin / (2 * cur.regn);
if (cur.fint > FINT_MAX || cur.fint < FINT_MIN)
if (cur.fint > dsi.fint_max || cur.fint < dsi.fint_min)
continue;
/* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */
for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) {
for (cur.regm = 1; cur.regm < dsi.regm_max; ++cur.regm) {
unsigned long a, b;
a = 2 * cur.regm * (cur.clkin/1000);
......@@ -921,7 +918,7 @@ int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck,
/* dsi_pll_hsdiv_dispc_clk(MHz) =
* DSIPHY(MHz) / regm_dispc < 173MHz/186Mhz */
for (cur.regm_dispc = 1; cur.regm_dispc < REGM_DISPC_MAX;
for (cur.regm_dispc = 1; cur.regm_dispc < dsi.regm_dispc_max;
++cur.regm_dispc) {
struct dispc_clock_info cur_dispc;
cur.dsi_pll_hsdiv_dispc_clk =
......@@ -994,6 +991,8 @@ int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo)
int r = 0;
u32 l;
int f;
u8 regn_start, regn_end, regm_start, regm_end;
u8 regm_dispc_start, regm_dispc_end, regm_dsi_start, regm_dsi_end;
DSSDBGF();
......@@ -1038,19 +1037,30 @@ int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo)
dss_feat_get_clk_source_name(DSS_CLK_SRC_DSI_PLL_HSDIV_DSI),
cinfo->dsi_pll_hsdiv_dsi_clk);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGN, &regn_start, &regn_end);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGM, &regm_start, &regm_end);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGM_DISPC, &regm_dispc_start,
&regm_dispc_end);
dss_feat_get_reg_field(FEAT_REG_DSIPLL_REGM_DSI, &regm_dsi_start,
&regm_dsi_end);
REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */
l = dsi_read_reg(DSI_PLL_CONFIGURATION1);
l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */
l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */
l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */
/* DSI_PLL_REGN */
l = FLD_MOD(l, cinfo->regn - 1, regn_start, regn_end);
/* DSI_PLL_REGM */
l = FLD_MOD(l, cinfo->regm, regm_start, regm_end);
/* DSI_CLOCK_DIV */
l = FLD_MOD(l, cinfo->regm_dispc > 0 ? cinfo->regm_dispc - 1 : 0,
22, 19); /* DSI_CLOCK_DIV */
regm_dispc_start, regm_dispc_end);
/* DSIPROTO_CLOCK_DIV */
l = FLD_MOD(l, cinfo->regm_dsi > 0 ? cinfo->regm_dsi - 1 : 0,
26, 23); /* DSIPROTO_CLOCK_DIV */
regm_dsi_start, regm_dsi_end);
dsi_write_reg(DSI_PLL_CONFIGURATION1, l);
BUG_ON(cinfo->fint < 750000 || cinfo->fint > 2100000);
BUG_ON(cinfo->fint < dsi.fint_min || cinfo->fint > dsi.fint_max);
if (cinfo->fint < 1000000)
f = 0x3;
else if (cinfo->fint < 1250000)
......@@ -3333,6 +3343,17 @@ void dsi_wait_pll_hsdiv_dsi_active(void)
dss_feat_get_clk_source_name(DSS_CLK_SRC_DSI_PLL_HSDIV_DSI));
}
static void dsi_calc_clock_param_ranges(void)
{
dsi.regn_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGN);
dsi.regm_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGM);
dsi.regm_dispc_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGM_DISPC);
dsi.regm_dsi_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_REGM_DSI);
dsi.fint_min = dss_feat_get_param_min(FEAT_PARAM_DSIPLL_FINT);
dsi.fint_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_FINT);
dsi.lpdiv_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_LPDIV);
}
static int dsi_init(struct platform_device *pdev)
{
u32 rev;
......@@ -3397,6 +3418,8 @@ static int dsi_init(struct platform_device *pdev)
dsi.vc[i].vc_id = 0;
}
dsi_calc_clock_param_ranges();
enable_clocks(1);
rev = dsi_read_reg(DSI_REVISION);
......
......@@ -63,6 +63,10 @@ static const struct dss_reg_field omap2_dss_reg_fields[] = {
[FEAT_REG_HORIZONTALACCU] = { 9, 0 },
[FEAT_REG_VERTICALACCU] = { 25, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 0, 0 },
[FEAT_REG_DSIPLL_REGN] = { 0, 0 },
[FEAT_REG_DSIPLL_REGM] = { 0, 0 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 0, 0 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 0, 0 },
};
static const struct dss_reg_field omap3_dss_reg_fields[] = {
......@@ -74,6 +78,10 @@ static const struct dss_reg_field omap3_dss_reg_fields[] = {
[FEAT_REG_HORIZONTALACCU] = { 9, 0 },
[FEAT_REG_VERTICALACCU] = { 25, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 0, 0 },
[FEAT_REG_DSIPLL_REGN] = { 7, 1 },
[FEAT_REG_DSIPLL_REGM] = { 18, 8 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 22, 19 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 26, 23 },
};
static const struct dss_reg_field omap4_dss_reg_fields[] = {
......@@ -85,6 +93,10 @@ static const struct dss_reg_field omap4_dss_reg_fields[] = {
[FEAT_REG_HORIZONTALACCU] = { 10, 0 },
[FEAT_REG_VERTICALACCU] = { 26, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 9, 8 },
[FEAT_REG_DSIPLL_REGN] = { 8, 1 },
[FEAT_REG_DSIPLL_REGM] = { 20, 9 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 25, 21 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 30, 26 },
};
static const enum omap_display_type omap2_dss_supported_displays[] = {
......@@ -185,14 +197,32 @@ static const char * const omap4_dss_clk_source_names[] = {
static const struct dss_param_range omap2_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 173000000 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, 0 },
[FEAT_PARAM_DSIPLL_FINT] = { 0, 0 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, 0 },
};
static const struct dss_param_range omap3_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 173000000 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 7) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 11) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 4) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 4) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 750000, 2100000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 1, (1 << 13) - 1},
};
static const struct dss_param_range omap4_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 186000000 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 8) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 12) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 500000, 2500000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, (1 << 13) - 1 },
};
/* OMAP2 DSS Features */
......
......@@ -52,10 +52,20 @@ enum dss_feat_reg_field {
FEAT_REG_HORIZONTALACCU,
FEAT_REG_VERTICALACCU,
FEAT_REG_DISPC_CLK_SWITCH,
FEAT_REG_DSIPLL_REGN,
FEAT_REG_DSIPLL_REGM,
FEAT_REG_DSIPLL_REGM_DISPC,
FEAT_REG_DSIPLL_REGM_DSI,
};
enum dss_range_param {
FEAT_PARAM_DSS_FCK,
FEAT_PARAM_DSIPLL_REGN,
FEAT_PARAM_DSIPLL_REGM,
FEAT_PARAM_DSIPLL_REGM_DISPC,
FEAT_PARAM_DSIPLL_REGM_DSI,
FEAT_PARAM_DSIPLL_FINT,
FEAT_PARAM_DSIPLL_LPDIV,
};
/* DSS Feature Functions */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment