ASoC: SOF: ipc4-topology: Add support for NHLT with 16-bit only DMIC blob

The ACPI NHLT table always had 32-bit DMIC blob even if 16-bit was also
present and taken as a 'rule' which obviously got broken and there is at
least one device on the market which ships with only 16-bit DMIC
configuration blob.
This corner case has never been supported and it is going to need topology
updates for DMIC copier to support multiple formats.

As for the kernel side: if the copier supports multiple formats and the
preferred 32-bit DMIC blob is not found then we will try to get a 16-bit
DMIC configuration and look for a 16-bit copier config.

Fixes: f9209644 ("ASoC: SOF: ipc4-topology: Correct DAI copier config and NHLT blob request")
Link: https://github.com/thesofproject/linux/issues/4973Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240530111918.21974-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sof/ipc4-topology.c

@@ -1483,6 +1483,8 @@ snd_sof_get_nhlt_endpoint_data(struct snd_sof_dev *sdev, struct snd_sof_dai *dai
 					   dir, dev_type);
 
 	if (!cfg) {
+		bool get_new_blob = false;
+
 		if (format_change) {
 			/*
 			 * The 32-bit blob was not found in NHLT table, try to
@@ -1490,7 +1492,20 @@ snd_sof_get_nhlt_endpoint_data(struct snd_sof_dev *sdev, struct snd_sof_dai *dai
 			 */
 			bit_depth = params_width(params);
 			format_change = false;
+			get_new_blob = true;
+		} else if (linktype == SOF_DAI_INTEL_DMIC && !single_format) {
+			/*
+			 * The requested 32-bit blob (no format change for the
+			 * blob request) was not found in NHLT table, try to
+			 * look for 16-bit blob if the copier supports multiple
+			 * formats
+			 */
+			bit_depth = 16;
+			format_change = true;
+			get_new_blob = true;
+		}
 
+		if (get_new_blob) {
 			cfg = intel_nhlt_get_endpoint_blob(sdev->dev, ipc4_data->nhlt,
 							   dai_index, nhlt_type,
 							   bit_depth, bit_depth,
@@ -1513,8 +1528,8 @@ snd_sof_get_nhlt_endpoint_data(struct snd_sof_dev *sdev, struct snd_sof_dai *dai
 
 	if (format_change) {
 		/*
-		 * Update the params to reflect that we have loaded 32-bit blob
-		 * instead of the 16-bit.
+		 * Update the params to reflect that different blob was loaded
+		 * instead of the requested bit depth (16 -> 32 or 32 -> 16).
 		 * This information is going to be used by the caller to find
 		 * matching copier format on the dai side.
 		 */
@@ -1522,7 +1537,11 @@ snd_sof_get_nhlt_endpoint_data(struct snd_sof_dev *sdev, struct snd_sof_dai *dai
 
 		m = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
 		snd_mask_none(m);
+		if (bit_depth == 16)
+			snd_mask_set_format(m, SNDRV_PCM_FORMAT_S16_LE);
+		else
 			snd_mask_set_format(m, SNDRV_PCM_FORMAT_S32_LE);
+
 	}
 
 	return 0;