drm/radeon/kms: add dpm support for rv6xx (v3)

This adds dpm support for rv6xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: remove duplicate line
v3: fix thermal interrupt check noticed by Jerome
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

drivers/gpu/drm/radeon/Makefile

@@ -77,7 +77,7 @@ radeon-y += radeon_device.o radeon_asic.o radeon_kms.o \
 	evergreen_hdmi.o radeon_trace_points.o ni.o cayman_blit_shaders.o \
 	atombios_encoders.o radeon_semaphore.o radeon_sa.o atombios_i2c.o si.o \
 	si_blit_shaders.o radeon_prime.o radeon_uvd.o cik.o cik_blit_shaders.o \
-	r600_dpm.o rs780_dpm.o
+	r600_dpm.o rs780_dpm.o rv6xx_dpm.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 radeon-$(CONFIG_VGA_SWITCHEROO) += radeon_atpx_handler.o

drivers/gpu/drm/radeon/r600.c

@@ -3998,6 +3998,7 @@ int r600_irq_set(struct radeon_device *rdev)
 	u32 hdmi0, hdmi1;
 	u32 d1grph = 0, d2grph = 0;
 	u32 dma_cntl;
+	u32 thermal_int = 0;
 
 	if (!rdev->irq.installed) {
 		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
@@ -4032,8 +4033,18 @@ int r600_irq_set(struct radeon_device *rdev)
 		hdmi0 = RREG32(HDMI0_AUDIO_PACKET_CONTROL) & ~HDMI0_AZ_FORMAT_WTRIG_MASK;
 		hdmi1 = RREG32(HDMI1_AUDIO_PACKET_CONTROL) & ~HDMI0_AZ_FORMAT_WTRIG_MASK;
 	}
+
 	dma_cntl = RREG32(DMA_CNTL) & ~TRAP_ENABLE;
 
+	if ((rdev->family > CHIP_R600) && (rdev->family < CHIP_RV770)) {
+		thermal_int = RREG32(CG_THERMAL_INT) &
+			~(THERM_INT_MASK_HIGH | THERM_INT_MASK_LOW);
+		if (rdev->irq.dpm_thermal) {
+			DRM_DEBUG("dpm thermal\n");
+			thermal_int |= THERM_INT_MASK_HIGH | THERM_INT_MASK_LOW;
+		}
+	}
+
 	if (atomic_read(&rdev->irq.ring_int[RADEON_RING_TYPE_GFX_INDEX])) {
 		DRM_DEBUG("r600_irq_set: sw int\n");
 		cp_int_cntl |= RB_INT_ENABLE;
@@ -4115,6 +4126,9 @@ int r600_irq_set(struct radeon_device *rdev)
 		WREG32(HDMI0_AUDIO_PACKET_CONTROL, hdmi0);
 		WREG32(HDMI1_AUDIO_PACKET_CONTROL, hdmi1);
 	}
+	if ((rdev->family > CHIP_R600) && (rdev->family < CHIP_RV770)) {
+		WREG32(CG_THERMAL_INT, thermal_int);
+	}
 
 	return 0;
 }
@@ -4306,6 +4320,7 @@ int r600_irq_process(struct radeon_device *rdev)
 	u32 ring_index;
 	bool queue_hotplug = false;
 	bool queue_hdmi = false;
+	bool queue_thermal = false;
 
 	if (!rdev->ih.enabled || rdev->shutdown)
 		return IRQ_NONE;
@@ -4473,6 +4488,16 @@ int r600_irq_process(struct radeon_device *rdev)
 			DRM_DEBUG("IH: DMA trap\n");
 			radeon_fence_process(rdev, R600_RING_TYPE_DMA_INDEX);
 			break;
+		case 230: /* thermal low to high */
+			DRM_DEBUG("IH: thermal low to high\n");
+			rdev->pm.dpm.thermal.high_to_low = false;
+			queue_thermal = true;
+			break;
+		case 231: /* thermal high to low */
+			DRM_DEBUG("IH: thermal high to low\n");
+			rdev->pm.dpm.thermal.high_to_low = true;
+			queue_thermal = true;
+			break;
 		case 233: /* GUI IDLE */
 			DRM_DEBUG("IH: GUI idle\n");
 			break;
@@ -4489,6 +4514,8 @@ int r600_irq_process(struct radeon_device *rdev)
 		schedule_work(&rdev->hotplug_work);
 	if (queue_hdmi)
 		schedule_work(&rdev->audio_work);
+	if (queue_thermal && rdev->pm.dpm_enabled)
+		schedule_work(&rdev->pm.dpm.thermal.work);
 	rdev->ih.rptr = rptr;
 	WREG32(IH_RB_RPTR, rdev->ih.rptr);
 	atomic_set(&rdev->ih.lock, 0);

drivers/gpu/drm/radeon/r600_dpm.c

@@ -676,3 +676,48 @@ bool r600_is_uvd_state(u32 class, u32 class2)
 		return true;
 	return false;
 }
+
+int r600_set_thermal_temperature_range(struct radeon_device *rdev,
+				       int min_temp, int max_temp)
+{
+	int low_temp = 0 * 1000;
+	int high_temp = 255 * 1000;
+
+	if (low_temp < min_temp)
+		low_temp = min_temp;
+	if (high_temp > max_temp)
+		high_temp = max_temp;
+	if (high_temp < low_temp) {
+		DRM_ERROR("invalid thermal range: %d - %d\n", low_temp, high_temp);
+		return -EINVAL;
+	}
+
+	WREG32_P(CG_THERMAL_INT, DIG_THERM_INTH(high_temp / 1000), ~DIG_THERM_INTH_MASK);
+	WREG32_P(CG_THERMAL_INT, DIG_THERM_INTL(low_temp / 1000), ~DIG_THERM_INTL_MASK);
+	WREG32_P(CG_THERMAL_CTRL, DIG_THERM_DPM(high_temp / 1000), ~DIG_THERM_DPM_MASK);
+
+	rdev->pm.dpm.thermal.min_temp = low_temp;
+	rdev->pm.dpm.thermal.max_temp = high_temp;
+
+	return 0;
+}
+
+bool r600_is_internal_thermal_sensor(enum radeon_int_thermal_type sensor)
+{
+	switch (sensor) {
+	case THERMAL_TYPE_RV6XX:
+	case THERMAL_TYPE_RV770:
+	case THERMAL_TYPE_EVERGREEN:
+	case THERMAL_TYPE_SUMO:
+	case THERMAL_TYPE_NI:
+		return true;
+	case THERMAL_TYPE_ADT7473_WITH_INTERNAL:
+	case THERMAL_TYPE_EMC2103_WITH_INTERNAL:
+		return false; /* need special handling */
+	case THERMAL_TYPE_NONE:
+	case THERMAL_TYPE_EXTERNAL:
+	case THERMAL_TYPE_EXTERNAL_GPIO:
+	default:
+		return false;
+	}
+}

drivers/gpu/drm/radeon/r600_dpm.h

@@ -92,6 +92,10 @@
 #define R600_PM_NUMBER_OF_VOLTAGE_LEVELS 4
 #define R600_PM_NUMBER_OF_ACTIVITY_LEVELS 3
 
+/* XXX are these ok? */
+#define R600_TEMP_RANGE_MIN (90 * 1000)
+#define R600_TEMP_RANGE_MAX (120 * 1000)
+
 enum r600_power_level {
 	R600_POWER_LEVEL_LOW = 0,
 	R600_POWER_LEVEL_MEDIUM = 1,
@@ -207,4 +211,8 @@ void r600_wait_for_power_level(struct radeon_device *rdev,
 void r600_start_dpm(struct radeon_device *rdev);
 void r600_stop_dpm(struct radeon_device *rdev);
 
+int r600_set_thermal_temperature_range(struct radeon_device *rdev,
+				       int min_temp, int max_temp);
+bool r600_is_internal_thermal_sensor(enum radeon_int_thermal_type sensor);
+
 #endif

drivers/gpu/drm/radeon/r600d.h

@@ -302,10 +302,23 @@
 #define	GRBM_SOFT_RESET					0x8020
 #define		SOFT_RESET_CP					(1<<0)
 
+#define	CG_THERMAL_CTRL					0x7F0
+#define		DIG_THERM_DPM(x)			((x) << 12)
+#define		DIG_THERM_DPM_MASK			0x000FF000
+#define		DIG_THERM_DPM_SHIFT			12
 #define	CG_THERMAL_STATUS				0x7F4
 #define		ASIC_T(x)			        ((x) << 0)
 #define		ASIC_T_MASK			        0x1FF
 #define		ASIC_T_SHIFT			        0
+#define	CG_THERMAL_INT					0x7F8
+#define		DIG_THERM_INTH(x)			((x) << 8)
+#define		DIG_THERM_INTH_MASK			0x0000FF00
+#define		DIG_THERM_INTH_SHIFT			8
+#define		DIG_THERM_INTL(x)			((x) << 16)
+#define		DIG_THERM_INTL_MASK			0x00FF0000
+#define		DIG_THERM_INTL_SHIFT			16
+#define 	THERM_INT_MASK_HIGH			(1 << 24)
+#define 	THERM_INT_MASK_LOW			(1 << 25)
 
 #define	HDP_HOST_PATH_CNTL				0x2C00
 #define	HDP_NONSURFACE_BASE				0x2C04

drivers/gpu/drm/radeon/radeon.h

@@ -227,6 +227,8 @@ void radeon_atom_set_engine_dram_timings(struct radeon_device *rdev,
 					 u32 eng_clock, u32 mem_clock);
 int radeon_atom_get_voltage_step(struct radeon_device *rdev,
 				 u8 voltage_type, u16 *voltage_step);
+int radeon_atom_get_max_vddc(struct radeon_device *rdev, u8 voltage_type,
+			     u16 voltage_id, u16 *voltage);
 int radeon_atom_round_to_true_voltage(struct radeon_device *rdev,
 				      u8 voltage_type,
 				      u16 nominal_voltage,
@@ -681,6 +683,7 @@ struct radeon_irq {
 	bool				hpd[RADEON_MAX_HPD_PINS];
 	bool				afmt[RADEON_MAX_AFMT_BLOCKS];
 	union radeon_irq_stat_regs	stat_regs;
+	bool				dpm_thermal;
 };
 
 int radeon_irq_kms_init(struct radeon_device *rdev);

drivers/gpu/drm/radeon/radeon_asic.c

@@ -1147,6 +1147,18 @@ static struct radeon_asic rv6xx_asic = {
 		.set_clock_gating = NULL,
 		.get_temperature = &rv6xx_get_temp,
 	},
+	.dpm = {
+		.init = &rv6xx_dpm_init,
+		.setup_asic = &rv6xx_setup_asic,
+		.enable = &rv6xx_dpm_enable,
+		.disable = &rv6xx_dpm_disable,
+		.set_power_state = &rv6xx_dpm_set_power_state,
+		.display_configuration_changed = &rv6xx_dpm_display_configuration_changed,
+		.fini = &rv6xx_dpm_fini,
+		.get_sclk = &rv6xx_dpm_get_sclk,
+		.get_mclk = &rv6xx_dpm_get_mclk,
+		.print_power_state = &rv6xx_dpm_print_power_state,
+	},
 	.pflip = {
 		.pre_page_flip = &rs600_pre_page_flip,
 		.page_flip = &rs600_page_flip,

drivers/gpu/drm/radeon/radeon_asic.h

@@ -402,6 +402,18 @@ int r600_mc_wait_for_idle(struct radeon_device *rdev);
 u32 r600_get_xclk(struct radeon_device *rdev);
 uint64_t r600_get_gpu_clock_counter(struct radeon_device *rdev);
 int rv6xx_get_temp(struct radeon_device *rdev);
+/* rv6xx dpm */
+int rv6xx_dpm_init(struct radeon_device *rdev);
+int rv6xx_dpm_enable(struct radeon_device *rdev);
+void rv6xx_dpm_disable(struct radeon_device *rdev);
+int rv6xx_dpm_set_power_state(struct radeon_device *rdev);
+void rv6xx_setup_asic(struct radeon_device *rdev);
+void rv6xx_dpm_display_configuration_changed(struct radeon_device *rdev);
+void rv6xx_dpm_fini(struct radeon_device *rdev);
+u32 rv6xx_dpm_get_sclk(struct radeon_device *rdev, bool low);
+u32 rv6xx_dpm_get_mclk(struct radeon_device *rdev, bool low);
+void rv6xx_dpm_print_power_state(struct radeon_device *rdev,
+				 struct radeon_ps *ps);
 /* rs780 dpm */
 int rs780_dpm_init(struct radeon_device *rdev);
 int rs780_dpm_enable(struct radeon_device *rdev);

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -2268,7 +2268,7 @@ static void radeon_atombios_add_pplib_thermal_controller(struct radeon_device *r
 	}
 }
 
-static void radeon_atombios_get_default_voltages(struct radeon_device *rdev,
+void radeon_atombios_get_default_voltages(struct radeon_device *rdev,
 					  u16 *vddc, u16 *vddci)
 {
 	struct radeon_mode_info *mode_info = &rdev->mode_info;

drivers/gpu/drm/radeon/radeon_irq_kms.c

@@ -116,6 +116,7 @@ void radeon_driver_irq_preinstall_kms(struct drm_device *dev)
 	/* Disable *all* interrupts */
 	for (i = 0; i < RADEON_NUM_RINGS; i++)
 		atomic_set(&rdev->irq.ring_int[i], 0);
+	rdev->irq.dpm_thermal = false;
 	for (i = 0; i < RADEON_MAX_HPD_PINS; i++)
 		rdev->irq.hpd[i] = false;
 	for (i = 0; i < RADEON_MAX_CRTCS; i++) {
@@ -163,6 +164,7 @@ void radeon_driver_irq_uninstall_kms(struct drm_device *dev)
 	/* Disable *all* interrupts */
 	for (i = 0; i < RADEON_NUM_RINGS; i++)
 		atomic_set(&rdev->irq.ring_int[i], 0);
+	rdev->irq.dpm_thermal = false;
 	for (i = 0; i < RADEON_MAX_HPD_PINS; i++)
 		rdev->irq.hpd[i] = false;
 	for (i = 0; i < RADEON_MAX_CRTCS; i++) {

drivers/gpu/drm/radeon/radeon_mode.h

@@ -580,6 +580,8 @@ extern enum radeon_tv_std
 radeon_combios_get_tv_info(struct radeon_device *rdev);
 extern enum radeon_tv_std
 radeon_atombios_get_tv_info(struct radeon_device *rdev);
+extern void radeon_atombios_get_default_voltages(struct radeon_device *rdev,
+						 u16 *vddc, u16 *vddci);
 
 extern struct drm_connector *
 radeon_get_connector_for_encoder(struct drm_encoder *encoder);

drivers/gpu/drm/radeon/radeon_pm.c

@@ -1030,6 +1030,11 @@ int radeon_pm_init(struct radeon_device *rdev)
 {
 	/* enable dpm on rv6xx+ */
 	switch (rdev->family) {
+	case CHIP_RV610:
+	case CHIP_RV630:
+	case CHIP_RV620:
+	case CHIP_RV635:
+	case CHIP_RV670:
 	case CHIP_RS780:
 	case CHIP_RS880:
 		if (radeon_dpm == 1)
@@ -1114,6 +1119,7 @@ static void radeon_pm_compute_clocks_old(struct radeon_device *rdev)
 	if (rdev->pm.num_power_states < 2)
 		return;
 
+	INIT_WORK(&rdev->pm.dpm.thermal.work, radeon_dpm_thermal_work_handler);
 	mutex_lock(&rdev->pm.mutex);
 
 	rdev->pm.active_crtcs = 0;

drivers/gpu/drm/radeon/rs780_dpm.c

@@ -560,6 +560,12 @@ int rs780_dpm_enable(struct radeon_device *rdev)
 	if (pi->gfx_clock_gating)
 		r600_gfx_clockgating_enable(rdev, true);
 
+	if (rdev->irq.installed && (rdev->pm.int_thermal_type == THERMAL_TYPE_RV6XX)) {
+		r600_set_thermal_temperature_range(rdev, R600_TEMP_RANGE_MIN, R600_TEMP_RANGE_MAX);
+		rdev->irq.dpm_thermal = true;
+		radeon_irq_set(rdev);
+	}
+
 	return 0;
 }
 
@@ -574,6 +580,12 @@ void rs780_dpm_disable(struct radeon_device *rdev)
 
 	if (pi->gfx_clock_gating)
 		r600_gfx_clockgating_enable(rdev, false);
+
+	if (rdev->irq.installed &&
+	    (rdev->pm.int_thermal_type == THERMAL_TYPE_RV6XX)) {
+		rdev->irq.dpm_thermal = false;
+		radeon_irq_set(rdev);
+	}
 }
 
 int rs780_dpm_set_power_state(struct radeon_device *rdev)

drivers/gpu/drm/radeon/rv6xx_dpm.h

+/*
+ * Copyright 2011 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Alex Deucher
+ */
+
+#ifndef __RV6XX_DPM_H__
+#define __RV6XX_DPM_H__
+
+#include "r600_dpm.h"
+
+/* Represents a single SCLK step. */
+struct rv6xx_sclk_stepping
+{
+    u32 vco_frequency;
+    u32 post_divider;
+};
+
+struct rv6xx_pm_hw_state {
+	u32 sclks[R600_PM_NUMBER_OF_ACTIVITY_LEVELS];
+	u32 mclks[R600_PM_NUMBER_OF_MCLKS];
+	u16 vddc[R600_PM_NUMBER_OF_VOLTAGE_LEVELS];
+	bool backbias[R600_PM_NUMBER_OF_VOLTAGE_LEVELS];
+	bool pcie_gen2[R600_PM_NUMBER_OF_ACTIVITY_LEVELS];
+	u8 high_sclk_index;
+	u8 medium_sclk_index;
+	u8 low_sclk_index;
+	u8 high_mclk_index;
+	u8 medium_mclk_index;
+	u8 low_mclk_index;
+	u8 high_vddc_index;
+	u8 medium_vddc_index;
+	u8 low_vddc_index;
+	u8 rp[R600_PM_NUMBER_OF_ACTIVITY_LEVELS];
+	u8 lp[R600_PM_NUMBER_OF_ACTIVITY_LEVELS];
+};
+
+struct rv6xx_power_info {
+	/* flags */
+	bool voltage_control;
+	bool sclk_ss;
+	bool mclk_ss;
+	bool dynamic_ss;
+	bool dynamic_pcie_gen2;
+	bool thermal_protection;
+	bool display_gap;
+	bool gfx_clock_gating;
+	/* clk values */
+	u32 fb_div_scale;
+	u32 spll_ref_div;
+	u32 mpll_ref_div;
+	u32 bsu;
+	u32 bsp;
+	/* */
+	u32 active_auto_throttle_sources;
+	/* current power state */
+	u32 restricted_levels;
+	struct rv6xx_pm_hw_state hw;
+};
+
+struct rv6xx_pl {
+	u32 sclk;
+	u32 mclk;
+	u16 vddc;
+	u32 flags;
+};
+
+struct rv6xx_ps {
+	struct rv6xx_pl high;
+	struct rv6xx_pl medium;
+	struct rv6xx_pl low;
+};
+
+#define RV6XX_DEFAULT_VCLK_FREQ  40000 /* 10 khz */
+#define RV6XX_DEFAULT_DCLK_FREQ  30000 /* 10 khz */
+
+#endif