Commit 4accdb98 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'timers-core-2023-09-04-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull clocksource/clockevent driver updates from Thomas Gleixner:

 - Remove the OXNAS driver instead of adding a new one!

 - A set of boring fixes, cleanups and improvements

* tag 'timers-core-2023-09-04-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Explicitly include correct DT includes
  clocksource/drivers/sun5i: Convert to platform device driver
  clocksource/drivers/sun5i: Remove pointless struct
  clocksource/drivers/sun5i: Remove duplication of code and data
  clocksource/drivers/loongson1: Set variable ls1x_timer_lock storage-class-specifier to static
  clocksource/drivers/arm_arch_timer: Disable timer before programming CVAL
  dt-bindings: timer: oxsemi,rps-timer: remove obsolete bindings
  clocksource/drivers/timer-oxnas-rps: Remove obsolete timer driver
parents 7a1415ee 5146e1f5
Oxford Semiconductor OXNAS SoCs Family RPS Timer
================================================
Required properties:
- compatible: Should be "oxsemi,ox810se-rps-timer" or "oxsemi,ox820-rps-timer"
- reg : Specifies base physical address and size of the registers.
- interrupts : The interrupts of the two timers
- clocks : The phandle of the timer clock source
example:
timer0: timer@200 {
compatible = "oxsemi,ox810se-rps-timer";
reg = <0x200 0x40>;
clocks = <&rpsclk>;
interrupts = <4 5>;
};
...@@ -461,13 +461,6 @@ config VF_PIT_TIMER ...@@ -461,13 +461,6 @@ config VF_PIT_TIMER
help help
Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs. Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs.
config OXNAS_RPS_TIMER
bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST
select TIMER_OF
select CLKSRC_MMIO
help
This enables support for the Oxford Semiconductor OXNAS RPS timers.
config SYS_SUPPORTS_SH_CMT config SYS_SUPPORTS_SH_CMT
bool bool
......
...@@ -54,7 +54,6 @@ obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o ...@@ -54,7 +54,6 @@ obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o
obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o obj-$(CONFIG_MTK_CPUX_TIMER) += timer-mediatek-cpux.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += timer-owl.o obj-$(CONFIG_OWL_TIMER) += timer-owl.o
obj-$(CONFIG_MILBEAUT_TIMER) += timer-milbeaut.o obj-$(CONFIG_MILBEAUT_TIMER) += timer-milbeaut.o
obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
......
...@@ -792,6 +792,13 @@ static __always_inline void set_next_event_mem(const int access, unsigned long e ...@@ -792,6 +792,13 @@ static __always_inline void set_next_event_mem(const int access, unsigned long e
u64 cnt; u64 cnt;
ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk); ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
/* Timer must be disabled before programming CVAL */
if (ctrl & ARCH_TIMER_CTRL_ENABLE) {
ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
}
ctrl |= ARCH_TIMER_CTRL_ENABLE; ctrl |= ARCH_TIMER_CTRL_ENABLE;
ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
......
...@@ -28,7 +28,7 @@ ...@@ -28,7 +28,7 @@
#define CNTR_WIDTH 24 #define CNTR_WIDTH 24
DEFINE_RAW_SPINLOCK(ls1x_timer_lock); static DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
struct ls1x_clocksource { struct ls1x_clocksource {
void __iomem *reg_base; void __iomem *reg_base;
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* drivers/clocksource/timer-oxnas-rps.c
*
* Copyright (C) 2009 Oxford Semiconductor Ltd
* Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
* Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/clockchips.h>
#include <linux/sched_clock.h>
/* TIMER1 used as tick
* TIMER2 used as clocksource
*/
/* Registers definitions */
#define TIMER_LOAD_REG 0x0
#define TIMER_CURR_REG 0x4
#define TIMER_CTRL_REG 0x8
#define TIMER_CLRINT_REG 0xC
#define TIMER_BITS 24
#define TIMER_MAX_VAL (BIT(TIMER_BITS) - 1)
#define TIMER_PERIODIC BIT(6)
#define TIMER_ENABLE BIT(7)
#define TIMER_DIV1 (0)
#define TIMER_DIV16 (1 << 2)
#define TIMER_DIV256 (2 << 2)
#define TIMER1_REG_OFFSET 0
#define TIMER2_REG_OFFSET 0x20
/* Clockevent & Clocksource data */
struct oxnas_rps_timer {
struct clock_event_device clkevent;
void __iomem *clksrc_base;
void __iomem *clkevt_base;
unsigned long timer_period;
unsigned int timer_prescaler;
struct clk *clk;
int irq;
};
static irqreturn_t oxnas_rps_timer_irq(int irq, void *dev_id)
{
struct oxnas_rps_timer *rps = dev_id;
writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
rps->clkevent.event_handler(&rps->clkevent);
return IRQ_HANDLED;
}
static void oxnas_rps_timer_config(struct oxnas_rps_timer *rps,
unsigned long period,
unsigned int periodic)
{
uint32_t cfg = rps->timer_prescaler;
if (period)
cfg |= TIMER_ENABLE;
if (periodic)
cfg |= TIMER_PERIODIC;
writel_relaxed(period, rps->clkevt_base + TIMER_LOAD_REG);
writel_relaxed(cfg, rps->clkevt_base + TIMER_CTRL_REG);
}
static int oxnas_rps_timer_shutdown(struct clock_event_device *evt)
{
struct oxnas_rps_timer *rps =
container_of(evt, struct oxnas_rps_timer, clkevent);
oxnas_rps_timer_config(rps, 0, 0);
return 0;
}
static int oxnas_rps_timer_set_periodic(struct clock_event_device *evt)
{
struct oxnas_rps_timer *rps =
container_of(evt, struct oxnas_rps_timer, clkevent);
oxnas_rps_timer_config(rps, rps->timer_period, 1);
return 0;
}
static int oxnas_rps_timer_set_oneshot(struct clock_event_device *evt)
{
struct oxnas_rps_timer *rps =
container_of(evt, struct oxnas_rps_timer, clkevent);
oxnas_rps_timer_config(rps, rps->timer_period, 0);
return 0;
}
static int oxnas_rps_timer_next_event(unsigned long delta,
struct clock_event_device *evt)
{
struct oxnas_rps_timer *rps =
container_of(evt, struct oxnas_rps_timer, clkevent);
oxnas_rps_timer_config(rps, delta, 0);
return 0;
}
static int __init oxnas_rps_clockevent_init(struct oxnas_rps_timer *rps)
{
ulong clk_rate = clk_get_rate(rps->clk);
ulong timer_rate;
/* Start with prescaler 1 */
rps->timer_prescaler = TIMER_DIV1;
rps->timer_period = DIV_ROUND_UP(clk_rate, HZ);
timer_rate = clk_rate;
if (rps->timer_period > TIMER_MAX_VAL) {
rps->timer_prescaler = TIMER_DIV16;
timer_rate = clk_rate / 16;
rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
}
if (rps->timer_period > TIMER_MAX_VAL) {
rps->timer_prescaler = TIMER_DIV256;
timer_rate = clk_rate / 256;
rps->timer_period = DIV_ROUND_UP(timer_rate, HZ);
}
rps->clkevent.name = "oxnas-rps";
rps->clkevent.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_DYNIRQ;
rps->clkevent.tick_resume = oxnas_rps_timer_shutdown;
rps->clkevent.set_state_shutdown = oxnas_rps_timer_shutdown;
rps->clkevent.set_state_periodic = oxnas_rps_timer_set_periodic;
rps->clkevent.set_state_oneshot = oxnas_rps_timer_set_oneshot;
rps->clkevent.set_next_event = oxnas_rps_timer_next_event;
rps->clkevent.rating = 200;
rps->clkevent.cpumask = cpu_possible_mask;
rps->clkevent.irq = rps->irq;
clockevents_config_and_register(&rps->clkevent,
timer_rate,
1,
TIMER_MAX_VAL);
pr_info("Registered clock event rate %luHz prescaler %x period %lu\n",
clk_rate,
rps->timer_prescaler,
rps->timer_period);
return 0;
}
/* Clocksource */
static void __iomem *timer_sched_base;
static u64 notrace oxnas_rps_read_sched_clock(void)
{
return ~readl_relaxed(timer_sched_base);
}
static int __init oxnas_rps_clocksource_init(struct oxnas_rps_timer *rps)
{
ulong clk_rate = clk_get_rate(rps->clk);
int ret;
/* use prescale 16 */
clk_rate = clk_rate / 16;
writel_relaxed(TIMER_MAX_VAL, rps->clksrc_base + TIMER_LOAD_REG);
writel_relaxed(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
rps->clksrc_base + TIMER_CTRL_REG);
timer_sched_base = rps->clksrc_base + TIMER_CURR_REG;
sched_clock_register(oxnas_rps_read_sched_clock,
TIMER_BITS, clk_rate);
ret = clocksource_mmio_init(timer_sched_base,
"oxnas_rps_clocksource_timer",
clk_rate, 250, TIMER_BITS,
clocksource_mmio_readl_down);
if (WARN_ON(ret)) {
pr_err("can't register clocksource\n");
return ret;
}
pr_info("Registered clocksource rate %luHz\n", clk_rate);
return 0;
}
static int __init oxnas_rps_timer_init(struct device_node *np)
{
struct oxnas_rps_timer *rps;
void __iomem *base;
int ret;
rps = kzalloc(sizeof(*rps), GFP_KERNEL);
if (!rps)
return -ENOMEM;
rps->clk = of_clk_get(np, 0);
if (IS_ERR(rps->clk)) {
ret = PTR_ERR(rps->clk);
goto err_alloc;
}
ret = clk_prepare_enable(rps->clk);
if (ret)
goto err_clk;
base = of_iomap(np, 0);
if (!base) {
ret = -ENXIO;
goto err_clk_prepare;
}
rps->irq = irq_of_parse_and_map(np, 0);
if (!rps->irq) {
ret = -EINVAL;
goto err_iomap;
}
rps->clkevt_base = base + TIMER1_REG_OFFSET;
rps->clksrc_base = base + TIMER2_REG_OFFSET;
/* Disable timers */
writel_relaxed(0, rps->clkevt_base + TIMER_CTRL_REG);
writel_relaxed(0, rps->clksrc_base + TIMER_CTRL_REG);
writel_relaxed(0, rps->clkevt_base + TIMER_LOAD_REG);
writel_relaxed(0, rps->clksrc_base + TIMER_LOAD_REG);
writel_relaxed(0, rps->clkevt_base + TIMER_CLRINT_REG);
writel_relaxed(0, rps->clksrc_base + TIMER_CLRINT_REG);
ret = request_irq(rps->irq, oxnas_rps_timer_irq,
IRQF_TIMER | IRQF_IRQPOLL,
"rps-timer", rps);
if (ret)
goto err_iomap;
ret = oxnas_rps_clocksource_init(rps);
if (ret)
goto err_irqreq;
ret = oxnas_rps_clockevent_init(rps);
if (ret)
goto err_irqreq;
return 0;
err_irqreq:
free_irq(rps->irq, rps);
err_iomap:
iounmap(base);
err_clk_prepare:
clk_disable_unprepare(rps->clk);
err_clk:
clk_put(rps->clk);
err_alloc:
kfree(rps);
return ret;
}
TIMER_OF_DECLARE(ox810se_rps,
"oxsemi,ox810se-rps-timer", oxnas_rps_timer_init);
TIMER_OF_DECLARE(ox820_rps,
"oxsemi,ox820-rps-timer", oxnas_rps_timer_init);
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment