Commit 4ae2eb60 authored by Russell King's avatar Russell King

[ARM] Remove hard coded per-architecture memory, ramdisk and initrd

We have a fair number of command line options which can be used
to pass information about the target to the kernel.  We also provide
a default command line which the kernel will use in absence of one
provided by the boot loader.  We pass the hard coded options via the
command line now.
parent 38145517
......@@ -63,11 +63,6 @@ dep_bool ' ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
dep_bool ' Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
dep_bool ' CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_CERF" = "y" ]; then
choice 'Cerf RAM available' \
"8MB CONFIG_SA1100_CERF_8MB \
16MB CONFIG_SA1100_CERF_16MB \
32MB CONFIG_SA1100_CERF_32MB \
64MB CONFIG_SA1100_CERF_64MB" CerfRam
choice 'Cerf Flash available' \
"8MB CONFIG_SA1100_CERF_FLASH_8MB \
16MB CONFIG_SA1100_CERF_FLASH_16MB \
......@@ -453,7 +448,9 @@ else
fi
comment 'At least one math emulation must be selected'
tristate 'NWFPE math emulation' CONFIG_FPE_NWFPE
dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
if [ "$CONFIG_CPU_26" = "n" -a "$CONFIG_CPU_32v3" = "n" ]; then
dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
fi
choice 'Kernel core (/proc/kcore) format' \
"ELF CONFIG_KCORE_ELF \
A.OUT CONFIG_KCORE_AOUT" ELF
......@@ -494,15 +491,10 @@ if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
fi
fi
if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
if [ "$CONFIG_CPU_32" = "y" ]; then
define_bool CONFIG_ALIGNMENT_TRAP y
else
if [ "$CONFIG_CPU_32" = "y" -a \
"$CONFIG_ARCH_EBSA110" != "y" ]; then
bool 'Mis-alignment trap handler' CONFIG_ALIGNMENT_TRAP
else
define_bool CONFIG_ALIGNMENT_TRAP n
fi
fi
endmenu
......@@ -510,6 +502,8 @@ source drivers/parport/Config.in
if [ "$CONFIG_ALIGNMENT_TRAP" = "y" ]; then
source drivers/mtd/Config.in
else
define_bool CONFIG_MTD n
fi
source drivers/pnp/Config.in
......
......@@ -147,7 +147,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock1"
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock1 mem=32M initrd=0xc0800000,3M"
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -236,7 +236,7 @@ CONFIG_MTD_ADI_EVB=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4192
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
#
......
......@@ -139,7 +139,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="ip=off"
CONFIG_CMDLINE="ip=off mem=32M root=/dev/ram ramdisk=8192 initrd=0xc0800000,4M"
# CONFIG_PFS168_CMDLINE is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......
......@@ -8,12 +8,21 @@ CONFIG_ARM=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_GENERIC_BUST_SPINLOCK is not set
# CONFIG_GENERIC_ISA_DMA is not set
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_OBSOLETE is not set
#
# General setup
#
CONFIG_NET=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
#
# Loadable module support
......@@ -25,17 +34,21 @@ CONFIG_MODULES=y
#
# System Type
#
# CONFIG_ARCH_ADIFCC is not set
CONFIG_ARCH_ANAKIN=y
# CONFIG_ARCH_ARCA5K is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP310 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_CLPS711X is not set
CONFIG_ARCH_ANAKIN=y
# CONFIG_ARCH_SHARK is not set
#
# Archimedes/A5000 Implementations
......@@ -61,12 +74,19 @@ CONFIG_ARCH_ANAKIN=y
#
# CONFIG_SA1100_ASSABET is not set
# CONFIG_ASSABET_NEPONSET is not set
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_BRUTUS is not set
# CONFIG_SA1100_CERF is not set
# CONFIG_SA1100_BITSY is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_H3XXX is not set
# CONFIG_SA1100_EXTENEX1 is not set
# CONFIG_SA1100_FLEXANET is not set
# CONFIG_SA1100_FREEBIRD is not set
# CONFIG_SA1100_GRAPHICSCLIENT is not set
# CONFIG_SA1100_GRAPHICSMASTER is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HUW_WEBPANEL is not set
# CONFIG_SA1100_ITSY is not set
......@@ -75,16 +95,31 @@ CONFIG_ARCH_ANAKIN=y
# CONFIG_SA1100_OMNIMETER is not set
# CONFIG_SA1100_PANGOLIN is not set
# CONFIG_SA1100_PLEB is not set
# CONFIG_SA1100_PT_SYSTEM3 is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SHERMAN is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_PFS168 is not set
# CONFIG_SA1100_VICTOR is not set
# CONFIG_SA1100_XP860 is not set
# CONFIG_SA1100_YOPY is not set
# CONFIG_SA1100_STORK is not set
# CONFIG_SA1100_USB is not set
# CONFIG_SA1100_USB_NETLINK is not set
# CONFIG_SA1100_USB_CHAR is not set
# CONFIG_H3600_SLEEVE is not set
#
# CLPS711X/EP721X Implementations
#
# CONFIG_ARCH_AUTCPU12 is not set
# CONFIG_ARCH_CDB89712 is not set
# CONFIG_ARCH_CLEP7312 is not set
# CONFIG_ARCH_EDB7211 is not set
# CONFIG_ARCH_P720T is not set
# CONFIG_ARCH_FORTUNET is not set
# CONFIG_ARCH_EP7211 is not set
# CONFIG_ARCH_EP7212 is not set
# CONFIG_ARCH_ACORN is not set
# CONFIG_FOOTBRIDGE is not set
# CONFIG_FOOTBRIDGE_HOST is not set
......@@ -97,27 +132,40 @@ CONFIG_CPU_32=y
#
# CONFIG_CPU_32v3 is not set
CONFIG_CPU_32v4=y
# CONFIG_CPU_32v5 is not set
# CONFIG_CPU_ARM610 is not set
# CONFIG_CPU_ARM710 is not set
# CONFIG_CPU_ARM720T is not set
# CONFIG_CPU_ARM920T is not set
# CONFIG_CPU_ARM922T is not set
# CONFIG_CPU_ARM926T is not set
# CONFIG_CPU_ARM1020 is not set
CONFIG_CPU_SA110=y
# CONFIG_CPU_SA1100 is not set
# CONFIG_DISCONTIGMEM is not set
# CONFIG_CPU_XSCALE is not set
# CONFIG_XSCALE_PMU is not set
#
# Processor Features
#
#
# General setup
#
# CONFIG_DISCONTIGMEM is not set
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_ISA_DMA is not set
# CONFIG_FIQ is not set
# CONFIG_ZBOOT_ROM is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
CONFIG_NET=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
#
# At least one math emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_FASTFPE is not set
CONFIG_KCORE_ELF=y
......@@ -126,20 +174,28 @@ CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_PREEMPT is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE=""
# CONFIG_ALIGNMENT_TRAP is not set
CONFIG_CMDLINE="root=/dev/ram initrd=0xc0800000,4M"
CONFIG_ALIGNMENT_TRAP=y
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
......@@ -149,7 +205,9 @@ CONFIG_CMDLINE=""
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
......@@ -165,13 +223,14 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
......@@ -181,17 +240,24 @@ CONFIG_INET=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
......@@ -229,7 +295,13 @@ CONFIG_IRDA=y
# CONFIG_IRLAN is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
# CONFIG_IRDA_OPTIONS is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
......@@ -241,25 +313,26 @@ CONFIG_IRDA=y
CONFIG_IRTTY_SIR=y
# CONFIG_IRPORT_SIR is not set
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_SA1100_FIR is not set
#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
......@@ -279,27 +352,73 @@ CONFIG_IRTTY_SIR=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
# CONFIG_ISDN_BOOL is not set
#
# Input core support
# Input device support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_GAMEPORT_PCIGAME is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
# CONFIG_SERIO is not set
# CONFIG_SERIO_SERPORT is not set
#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_CONSOLE is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
#
# ARM Serial drivers
#
# CONFIG_ATOMWIDE_SERIAL is not set
# CONFIG_DUALSP_SERIAL is not set
CONFIG_SERIAL_ANAKIN=y
CONFIG_SERIAL_ANAKIN_CONSOLE=y
CONFIG_ANAKIN_DEFAULT_BAUDRATE=115200
CONFIG_TOUCHSCREEN_ANAKIN=y
# CONFIG_SERIAL_AMBA is not set
# CONFIG_SERIAL_AMBA_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
# CONFIG_SERIAL_21285 is not set
# CONFIG_SERIAL_21285_OLD is not set
# CONFIG_SERIAL_21285_CONSOLE is not set
# CONFIG_SERIAL_UART00 is not set
# CONFIG_SERIAL_UART00_CONSOLE is not set
# CONFIG_SERIAL_SA1100 is not set
# CONFIG_SERIAL_SA1100_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_TOUCHSCREEN_ANAKIN=y
# CONFIG_UNIX98_PTYS is not set
#
......@@ -308,19 +427,23 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_I2C is not set
#
# Mice
# L3 serial bus support
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
# CONFIG_L3 is not set
# CONFIG_L3_ALGOBIT is not set
# CONFIG_L3_BIT_SA1100_GPIO is not set
#
# Joysticks
# Other L3 adapters
#
# CONFIG_JOYSTICK is not set
# CONFIG_L3_SA1111 is not set
# CONFIG_BIT_SA1100_GPIO is not set
#
# Input core support is needed for joysticks
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
......@@ -350,27 +473,40 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_QIFACE_COMPAT is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set
# CONFIG_RAMFS is not set
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_HPFS_FS is not set
......@@ -384,7 +520,6 @@ CONFIG_PROC_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
......@@ -394,13 +529,16 @@ CONFIG_EXT2_FS=y
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
......@@ -411,12 +549,12 @@ CONFIG_EXT2_FS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
......@@ -425,7 +563,6 @@ CONFIG_MSDOS_PARTITION=y
#
CONFIG_PC_KEYMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FB=y
#
# Frame-buffer support
......@@ -433,11 +570,10 @@ CONFIG_FB=y
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_ACORN is not set
CONFIG_FB_ANAKIN=y
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_SA1100 is not set
CONFIG_FB_ANAKIN=y
# CONFIG_FB_E1355 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB16=y
......@@ -446,20 +582,50 @@ CONFIG_FBCON_CFB16=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP is not set
# CONFIG_MCP_SA1100 is not set
# CONFIG_MCP_UCB1200 is not set
# CONFIG_MCP_UCB1200_AUDIO is not set
# CONFIG_MCP_UCB1200_TS is not set
#
# Console Switches
#
# CONFIG_SWITCHES is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
# CONFIG_NO_FRAME_POINTER is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_NO_PGT_CACHE is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_DC21285_PORT is not set
# CONFIG_DEBUG_CLPS711X_UART2 is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
......@@ -157,7 +157,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PM=y
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE=""
CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......@@ -834,6 +834,13 @@ CONFIG_MCP_UCB1200=y
CONFIG_MCP_UCB1200_AUDIO=m
CONFIG_MCP_UCB1200_TS=y
#
# Console Switches
#
CONFIG_SWITCHES=y
CONFIG_SWITCHES_SA1100=y
CONFIG_SWITCHES_UCB1X00=y
#
# USB support
#
......
......@@ -527,7 +527,6 @@ CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
......
......@@ -76,7 +76,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="keepinitrd"
CONFIG_CMDLINE="mem=4M@0xc0000000 mem=4M@0xc8000000 mem=4M@0xd0000000 mem=4M@0xd8000000 keepinitrd root=/dev/ram ramdisk=8192 initrd=0xd8000000,3M"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......
......@@ -65,10 +65,6 @@ CONFIG_ARCH_SA1100=y
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_BRUTUS is not set
CONFIG_SA1100_CERF=y
# CONFIG_SA1100_CERF_8MB is not set
# CONFIG_SA1100_CERF_16MB is not set
CONFIG_SA1100_CERF_32MB=y
# CONFIG_SA1100_CERF_64MB is not set
# CONFIG_SA1100_CERF_FLASH_8MB is not set
CONFIG_SA1100_CERF_FLASH_16MB=y
# CONFIG_SA1100_CERF_FLASH_32MB is not set
......@@ -163,7 +159,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttySA0 root=1f03 rw"
CONFIG_CMDLINE="console=ttySA0 root=/dev/mtdblock3 rw mem=32M"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
......
......@@ -65,10 +65,6 @@ CONFIG_ARCH_SA1100=y
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_BRUTUS is not set
CONFIG_SA1100_CERF=y
# CONFIG_SA1100_CERF_8MB is not set
# CONFIG_SA1100_CERF_16MB is not set
# CONFIG_SA1100_CERF_32MB is not set
CONFIG_SA1100_CERF_64MB=y
# CONFIG_SA1100_CERF_FLASH_8MB is not set
# CONFIG_SA1100_CERF_FLASH_16MB is not set
CONFIG_SA1100_CERF_FLASH_32MB=y
......@@ -163,7 +159,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttySA0 cpufreq_max=221200 root=1f03 rw"
CONFIG_CMDLINE="console=ttySA0 cpufreq_max=221200 root=/dev/mtdblock3 rw mem=64M"
# CONFIG_PFS168_CMDLINE is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......
......@@ -65,10 +65,6 @@ CONFIG_ARCH_SA1100=y
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_BRUTUS is not set
CONFIG_SA1100_CERF=y
# CONFIG_SA1100_CERF_8MB is not set
# CONFIG_SA1100_CERF_16MB is not set
CONFIG_SA1100_CERF_32MB=y
# CONFIG_SA1100_CERF_64MB is not set
# CONFIG_SA1100_CERF_FLASH_8MB is not set
CONFIG_SA1100_CERF_FLASH_16MB=y
# CONFIG_SA1100_CERF_FLASH_32MB is not set
......@@ -163,7 +159,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttySA0 root=1f03 rw"
CONFIG_CMDLINE="console=ttySA0 root=/dev/mtdblock3 rw mem=32M"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
......
......@@ -56,7 +56,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
# CONFIG_PARPORT is not set
CONFIG_CMDLINE=""
CONFIG_CMDLINE="mem=4M@0xc0000000 mem=4M@0xc8000000 root=/dev/hda1 initrd=0xd00b0000,320K"
#
# Plug and Play support
......
......@@ -156,7 +156,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttyUA0,38400 root=/dev/mtdblock0 rw"
CONFIG_CMDLINE="mem=32M console=ttyUA0,38400 root=/dev/mtdblock0 rw"
CONFIG_ALIGNMENT_TRAP=y
#
......
......@@ -162,7 +162,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PM=y
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE=""
CONFIG_CMDLINE="mem=64M root=/dev/ram initrd=0xc0800000,3M"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......@@ -263,7 +263,7 @@ CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
#
......
......@@ -131,7 +131,7 @@ CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="mem=32M"
CONFIG_CMDLINE="mem=32M root=/dev/ram initrd=0xc0800000,3M"
# CONFIG_PFS168_CMDLINE is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......@@ -202,7 +202,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
#
......
......@@ -131,7 +131,7 @@ CONFIG_BINFMT_ELF=y
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="noinitrd console=ttySA0 init=/linuxrc root=1f04 mem=32m"
CONFIG_CMDLINE="noinitrd console=ttySA0 init=/linuxrc root=/dev/mtdblock4 mem=32m"
# CONFIG_PFS168_CMDLINE is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......
......@@ -146,7 +146,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="ip=off"
CONFIG_CMDLINE="ip=off mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0800000,4M"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
......
......@@ -139,7 +139,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="ip=off"
CONFIG_CMDLINE="ip=off mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0800000,4M"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
......
......@@ -96,7 +96,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="keepinitrd"
CONFIG_CMDLINE="keepinitrd mem=32480K root=/dev/ram initrd=0xc0800000,8M"
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......@@ -167,7 +167,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_FLASH is not set
......
......@@ -161,7 +161,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp"
CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp mem=32M root=/dev/nfs initrd=0xc0800000,4M"
CONFIG_ALIGNMENT_TRAP=y
#
......
......@@ -158,7 +158,7 @@ CONFIG_BINFMT_ELF=y
CONFIG_PM=y
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="keepinitrd"
CONFIG_CMDLINE="keepinitrd mem=32M"
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......
......@@ -2,7 +2,14 @@
# Automatically generated make config: don't edit
#
CONFIG_ARM=y
# CONFIG_EISA is not set
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_GENERIC_BUST_SPINLOCK is not set
# CONFIG_GENERIC_ISA_DMA is not set
#
# Code maturity level options
......@@ -10,50 +17,169 @@ CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
#
# System and Processor Type
# General setup
#
# CONFIG_ARCH_ARC is not set
# CONFIG_ARCH_A5K is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# System Type
#
# CONFIG_ARCH_ADIFCC is not set
# CONFIG_ARCH_ANAKIN is not set
# CONFIG_ARCH_ARCA5K is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_FOOTBRIDGE is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP310 is not set
CONFIG_ARCH_L7200=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
#
# Archimedes/A5000 Implementations
#
#
# Archimedes/A5000 Implementations (select only ONE)
#
# CONFIG_ARCH_ARC is not set
# CONFIG_ARCH_A5K is not set
#
# Footbridge Implementations
#
# CONFIG_ARCH_CATS is not set
# CONFIG_ARCH_PERSONAL_SERVER is not set
# CONFIG_ARCH_EBSA285_ADDIN is not set
# CONFIG_ARCH_EBSA285_HOST is not set
# CONFIG_ARCH_NETWINDER is not set
#
# SA11x0 Implementations
#
# CONFIG_SA1100_ASSABET is not set
# CONFIG_ASSABET_NEPONSET is not set
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_BRUTUS is not set
# CONFIG_SA1100_CERF is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_H3XXX is not set
# CONFIG_SA1100_EXTENEX1 is not set
# CONFIG_SA1100_FLEXANET is not set
# CONFIG_SA1100_FREEBIRD is not set
# CONFIG_SA1100_GRAPHICSCLIENT is not set
# CONFIG_SA1100_GRAPHICSMASTER is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HUW_WEBPANEL is not set
# CONFIG_SA1100_ITSY is not set
# CONFIG_SA1100_LART is not set
# CONFIG_SA1100_NANOENGINE is not set
# CONFIG_SA1100_OMNIMETER is not set
# CONFIG_SA1100_PANGOLIN is not set
# CONFIG_SA1100_PLEB is not set
# CONFIG_SA1100_PT_SYSTEM3 is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SHERMAN is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_PFS168 is not set
# CONFIG_SA1100_VICTOR is not set
# CONFIG_SA1100_XP860 is not set
# CONFIG_SA1100_YOPY is not set
# CONFIG_SA1100_STORK is not set
# CONFIG_SA1100_USB is not set
# CONFIG_SA1100_USB_NETLINK is not set
# CONFIG_SA1100_USB_CHAR is not set
# CONFIG_H3600_SLEEVE is not set
#
# CLPS711X/EP721X Implementations
#
# CONFIG_ARCH_AUTCPU12 is not set
# CONFIG_ARCH_CDB89712 is not set
# CONFIG_ARCH_CLEP7312 is not set
# CONFIG_ARCH_EDB7211 is not set
# CONFIG_ARCH_P720T is not set
# CONFIG_ARCH_FORTUNET is not set
# CONFIG_ARCH_EP7211 is not set
# CONFIG_ARCH_EP7212 is not set
# CONFIG_ARCH_ACORN is not set
# CONFIG_FOOTBRIDGE is not set
# CONFIG_FOOTBRIDGE_HOST is not set
# CONFIG_FOOTBRIDGE_ADDIN is not set
CONFIG_CPU_32=y
# CONFIG_CPU_26 is not set
#
# Processor Type
#
# CONFIG_CPU_32v3 is not set
CONFIG_CPU_32v4=y
CONFIG_CPU_ARM720=y
CONFIG_ZBOOT_ROM=y
CONFIG_ZBOOT_ROM_TEXT=0x00010000
CONFIG_ZBOOT_ROM_BSS=0xf03e0000
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_ISA_DMA is not set
# CONFIG_SBUS is not set
# CONFIG_PCMCIA is not set
# CONFIG_ALIGNMENT_TRAP is not set
# CONFIG_CPU_32v5 is not set
# CONFIG_CPU_ARM610 is not set
# CONFIG_CPU_ARM710 is not set
CONFIG_CPU_ARM720T=y
# CONFIG_CPU_ARM920T is not set
# CONFIG_CPU_ARM922T is not set
# CONFIG_CPU_ARM926T is not set
# CONFIG_CPU_ARM1020 is not set
# CONFIG_CPU_SA110 is not set
# CONFIG_CPU_SA1100 is not set
# CONFIG_CPU_XSCALE is not set
# CONFIG_XSCALE_PMU is not set
#
# Loadable module support
# Processor Features
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
# CONFIG_ARM_THUMB is not set
#
# General setup
#
# CONFIG_NET is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_NWFPE=y
# CONFIG_DISCONTIGMEM is not set
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_ISA_DMA is not set
CONFIG_FIQ=y
CONFIG_ZBOOT_ROM=y
CONFIG_ZBOOT_ROM_TEXT=00010000
CONFIG_ZBOOT_ROM_BSS=f03e0000
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
#
# At least one math emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_PREEMPT is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
CONFIG_ALIGNMENT_TRAP=y
#
# Parallel port support
......@@ -61,18 +187,16 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PARPORT is not set
#
# I2O device support
# Memory Technology Devices (MTD)
#
# CONFIG_I2O is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
# CONFIG_MTD is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
......@@ -81,28 +205,79 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_LVM is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_STRIPED is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# ISDN subsystem
#
#
# Input device support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_GAMEPORT_PCIGAME is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
# CONFIG_SERIO is not set
# CONFIG_SERIO_SERPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_SERIAL_L7200=y
CONFIG_SERIAL_L7200_CONSOLE=y
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
......@@ -110,11 +285,48 @@ CONFIG_SERIAL_L7200_CONSOLE=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
#
# ARM Serial drivers
#
# CONFIG_ATOMWIDE_SERIAL is not set
# CONFIG_DUALSP_SERIAL is not set
# CONFIG_SERIAL_ANAKIN is not set
# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
# CONFIG_SERIAL_AMBA is not set
# CONFIG_SERIAL_AMBA_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
# CONFIG_SERIAL_21285 is not set
# CONFIG_SERIAL_21285_OLD is not set
# CONFIG_SERIAL_21285_CONSOLE is not set
# CONFIG_SERIAL_UART00 is not set
# CONFIG_SERIAL_UART00_CONSOLE is not set
# CONFIG_SERIAL_SA1100 is not set
# CONFIG_SERIAL_SA1100_CONSOLE is not set
# CONFIG_UNIX98_PTYS is not set
#
......@@ -123,28 +335,32 @@ CONFIG_SERIAL_L7200_CONSOLE=y
# CONFIG_I2C is not set
#
# Mice
# L3 serial bus support
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
# CONFIG_L3 is not set
# CONFIG_L3_ALGOBIT is not set
# CONFIG_L3_BIT_SA1100_GPIO is not set
#
# Joysticks
# Other L3 adapters
#
# CONFIG_L3_SA1111 is not set
# CONFIG_BIT_SA1100_GPIO is not set
#
# Mice
#
# CONFIG_JOYSTICK is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
......@@ -153,48 +369,58 @@ CONFIG_SERIAL_L7200_CONSOLE=y
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_DRM is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI support
# Multimedia devices
#
# CONFIG_SCSI is not set
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_QIFACE_COMPAT is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
......@@ -202,20 +428,35 @@ CONFIG_PROC_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_SMB_FS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set
#
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP is not set
# CONFIG_MCP_SA1100 is not set
# CONFIG_MCP_UCB1200 is not set
# CONFIG_MCP_UCB1200_AUDIO is not set
# CONFIG_MCP_UCB1200_TS is not set
#
# Console Switches
#
# CONFIG_SWITCHES is not set
#
# USB support
#
......@@ -224,9 +465,23 @@ CONFIG_MSDOS_PARTITION=y
#
# Kernel hacking
#
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_NO_FRAME_POINTER is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_DC21285_PORT is not set
# CONFIG_DEBUG_CLPS711X_UART2 is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
......@@ -820,6 +820,13 @@ CONFIG_MCP_UCB1200=y
CONFIG_MCP_UCB1200_AUDIO=m
CONFIG_MCP_UCB1200_TS=y
#
# Console Switches
#
CONFIG_SWITCHES=y
CONFIG_SWITCHES_SA1100=y
CONFIG_SWITCHES_UCB1X00=y
#
# USB support
#
......
......@@ -100,7 +100,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="keepinitrd"
CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M"
# CONFIG_LEDS is not set
# CONFIG_ALIGNMENT_TRAP is not set
......
......@@ -137,7 +137,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="keepinitrd"
CONFIG_CMDLINE="keepinitrd mem=128M root=/dev/ram initrd=0xc0800000,3M"
# CONFIG_PFS168_CMDLINE is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......@@ -249,7 +249,7 @@ CONFIG_MTD_SA1100=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
#
......
......@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="root=/dev/nfs"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_CMDLINE="root=/dev/nfs mem=16M"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......
......@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="root=/dev/nfs"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_CMDLINE="root=/dev/nfs mem=16M"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......
......@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="root=/dev/nfs"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_CMDLINE="root=/dev/nfs mem=16M"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......
......@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="root=/dev/nfs"
# CONFIG_PFS168_CMDLINE is not set
CONFIG_CMDLINE="root=/dev/nfs mem=16M"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......
......@@ -126,7 +126,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_PM is not set
# CONFIG_APM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="console=ttySA0,9600"
CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
# CONFIG_PFS168_CMDLINE is not set
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
......@@ -213,7 +213,7 @@ CONFIG_ALIGNMENT_TRAP=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
#
......
......@@ -60,7 +60,7 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
# CONFIG_PARPORT is not set
CONFIG_CMDLINE=""
CONFIG_CMDLINE="mem=64M@0xc0000000 mem=64M@0xc8000000 root=/dev/mtdblock2"
#
# Plug and Play support
......
......@@ -341,7 +341,7 @@ parse_cmdline(struct meminfo *mi, char **cmdline_p, char *from)
*cmdline_p = command_line;
}
void __init
static void __init
setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
{
#ifdef CONFIG_BLK_DEV_RAM
......@@ -359,7 +359,7 @@ setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
/*
* initial ram disk
*/
void __init setup_initrd(unsigned int start, unsigned int size)
static void __init setup_initrd(unsigned int start, unsigned int size)
{
#ifdef CONFIG_BLK_DEV_INITRD
if (start == 0)
......
......@@ -21,27 +21,10 @@
extern void adifcc_map_io(void);
extern void adifcc_init_irq(void);
static void __init
fixup_adifcc(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
#ifdef CONFIG_ARCH_ADI_EVB
mi->bank[0].start = PHYS_OFFSET;
mi->bank[0].size = (32*1024*1024);
mi->bank[0].node = 0;
mi->nr_banks = 1;
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( 0xc0800000, 3*1024*1024 );
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
#endif
}
#ifdef CONFIG_ARCH_ADI_EVB
MACHINE_START(ADI_EVB, "ADI 80200FCC Evaluation Board")
MAINTAINER("MontaVista Software Inc.")
BOOT_MEM(0xc0000000, 0x00400000, 0xff400000)
FIXUP(fixup_adifcc)
MAPIO(adifcc_map_io)
INITIRQ(adifcc_init_irq)
MACHINE_END
......
......@@ -19,28 +19,13 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#ifndef CONFIG_BLK_DEV_RAM_SIZE
#define CONFIG_BLK_DEV_RAM_SIZE 4096
#endif
extern void anakin_map_io(void);
extern void genarch_init_irq(void);
static void __init
fixup_anakin(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
ROOT_DEV = mk_kdev(RAMDISK_MAJOR, 0);
setup_ramdisk(1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE);
setup_initrd(0xc0800000, 4 * 1024 * 1024);
}
MACHINE_START(ANAKIN, "Anakin")
MAINTAINER("Wookey/Tak-Shing Chan")
BOOT_MEM(0x20000000, 0x40000000, 0xe0000000)
VIDEO(0x80000000, 0x8002db40)
FIXUP(fixup_anakin)
MAPIO(anakin_map_io)
INITIRQ(genarch_init_irq)
MACHINE_END
......@@ -44,12 +44,6 @@ static struct map_desc cdb89712_io_desc[] __initdata = {
LAST_DESC
};
static void __init
fixup_cdb89712(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
}
static void __init cdb89712_map_io(void)
{
clps711x_map_io();
......@@ -60,7 +54,6 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
MAINTAINER("Ray Lehtiniemi")
BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_cdb89712)
MAPIO(cdb89712_map_io)
INITIRQ(clps711x_init_irq)
MACHINE_END
......
......@@ -33,29 +33,9 @@
extern void epxa10db_map_io(void);
extern void epxa10db_init_irq(void);
static void __init
epxa10db_fixup(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
mi->nr_banks = 1;
mi->bank[0].start = 0;
mi->bank[0].size = (32*1024*1024);
mi->bank[0].node = 0;
/*
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd(0xc0200000, 6*1024*1024);
*/
}
MACHINE_START(CAMELOT, "Altera Epxa10db")
MAINTAINER("Altera Corporation")
BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000)
FIXUP(epxa10db_fixup)
MAPIO(epxa10db_map_io)
INITIRQ(epxa10db_init_irq)
MACHINE_END
......@@ -50,9 +50,7 @@ static struct kmi_info integrator_mouse __initdata = {
};
#endif
static void __init
integrator_fixup(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
static int __init integrator_init(void)
{
#ifdef CONFIG_KMI_KEYB
register_kmi(&integrator_keyboard);
......@@ -60,11 +58,12 @@ integrator_fixup(struct machine_desc *desc, struct tag *tags,
#endif
}
__initcall(integrator_init);
MACHINE_START(INTEGRATOR, "ARM-Integrator")
MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
BOOT_PARAMS(0x00000100)
FIXUP(integrator_fixup)
MAPIO(integrator_map_io)
INITIRQ(integrator_init_irq)
MACHINE_END
......@@ -31,21 +31,8 @@ fixup_iq80310(struct machine_desc *desc, struct tag *tags,
{
system_rev = (*(volatile unsigned int*)0xfe830000) & 0x0f;
if(system_rev)
if (system_rev)
system_rev = 0xF;
mi->bank[0].start = PHYS_OFFSET;
mi->bank[0].size = (32*1024*1024);
mi->bank[0].node = 0;
mi->nr_banks = 1;
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = to_kdev_t(0x00FF); /* /dev/nfs pseudo device */
#elif defined(CONFIG_BLK_DEV_INITRD)
setup_ramdisk( 1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE );
setup_initrd( 0xc0800000, 4*1024*1024 );
ROOT_DEV = mk_kdev(RAMDISK_MAJOR, 0); /* /dev/ram */
#endif
}
MACHINE_START(IQ80310, "Cyclone IQ80310")
......
......@@ -82,33 +82,9 @@ static void __init l7200_map_io(void)
iotable_init(l7200_io_desc);
}
static void __init
fixup_l7200(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
mi->nr_banks = 1;
mi->bank[0].start = PHYS_OFFSET;
mi->bank[0].size = (32*1024*1024);
mi->bank[0].node = 0;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE);
setup_initrd( __phys_to_virt(0xf1000000), 0x005dac7b);
/* Serial Console COM2 and LCD */
strcpy( *cmdline, "console=tty0 console=ttyLU1,115200");
/* Serial Console COM1 and LCD */
//strcpy( *cmdline, "console=tty0 console=ttyLU0,115200");
/* Console on LCD */
//strcpy( *cmdline, "console=tty0");
}
MACHINE_START(L7200, "LinkUp Systems L7200")
MAINTAINER("Steve Hill / Scott McConnell")
BOOT_MEM(0xf0000000, 0x80040000, 0xd0000000)
FIXUP(fixup_l7200)
MAPIO(l7200_map_io)
INITIRQ(l7200_init_irq)
MACHINE_END
......
......@@ -68,23 +68,6 @@ static void __init idp_init_irq(void)
pxa_init_irq();
}
static void __init
fixup_idp(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
#ifdef PXA_IDP_REV02
SET_BANK (0, 0xa0000000, 64*1024*1024);
#else
SET_BANK (0, 0xa0000000, 32*1024*1024);
#endif
mi->nr_banks = 1;
#if 0
setup_ramdisk (1, 0, 0, 8192);
setup_initrd (__phys_to_virt(0xa1000000), 4*1024*1024);
ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
#endif
}
static struct map_desc idp_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
......@@ -132,7 +115,6 @@ static void __init idp_map_io(void)
MACHINE_START(PXA_IDP, "Accelent Xscale IDP")
MAINTAINER("Accelent Systems Inc.")
BOOT_MEM(0xa0000000, 0x40000000, 0xfc000000)
FIXUP(fixup_idp)
MAPIO(idp_map_io)
INITIRQ(idp_init_irq)
MACHINE_END
......@@ -119,19 +119,6 @@ static int __init lubbock_init(void)
__initcall(lubbock_init);
static void __init
fixup_lubbock(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK (0, 0xa0000000, 64*1024*1024);
mi->nr_banks = 1;
#if 0
setup_ramdisk (1, 0, 0, 8192);
setup_initrd (__phys_to_virt(0xa1000000), 4*1024*1024);
ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
#endif
}
static struct map_desc lubbock_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x08000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
......@@ -160,7 +147,6 @@ static void __init lubbock_map_io(void)
MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform")
MAINTAINER("MontaVista Software Inc.")
BOOT_MEM(0xa0000000, 0x40000000, 0xfc000000)
FIXUP(fixup_lubbock)
MAPIO(lubbock_map_io)
INITIRQ(lubbock_init_irq)
MACHINE_END
......@@ -60,16 +60,6 @@ __tagtable(ATAG_ACORN, parse_tag_acorn);
#endif
static void __init
fixup_riscpc(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
/*
* RiscPC can't handle half-word loads and stores
*/
elf_hwcap &= ~HWCAP_HALF;
}
static struct map_desc rpc_io_desc[] __initdata = {
{ SCREEN_BASE, SCREEN_START, 2*1048576, DOMAIN_IO, 0, 1, 0, 0 }, /* VRAM */
{ IO_BASE, IO_START, IO_SIZE , DOMAIN_IO, 0, 1, 0, 0 }, /* IO space */
......@@ -80,6 +70,11 @@ static struct map_desc rpc_io_desc[] __initdata = {
void __init rpc_map_io(void)
{
iotable_init(rpc_io_desc);
/*
* RiscPC can't handle half-word loads and stores
*/
elf_hwcap &= ~HWCAP_HALF;
}
MACHINE_START(RISCPC, "Acorn-RiscPC")
......@@ -88,7 +83,6 @@ MACHINE_START(RISCPC, "Acorn-RiscPC")
BOOT_PARAMS(0x10000100)
DISABLE_PARPORT(0)
DISABLE_PARPORT(1)
FIXUP(fixup_riscpc)
MAPIO(rpc_map_io)
INITIRQ(rpc_init_irq)
MACHINE_END
......@@ -76,23 +76,6 @@ static void __init adsbitsy_init_irq(void)
sa1100_init_irq();
}
/*
* Initialization fixup
*/
static void __init
fixup_adsbitsy(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
}
static struct map_desc adsbitsy_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf4000000, 0x18000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA1111 */
......@@ -135,7 +118,6 @@ static void __init adsbitsy_map_io(void)
MACHINE_START(ADSBITSY, "ADS Bitsy")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_adsbitsy)
MAPIO(adsbitsy_map_io)
INITIRQ(adsbitsy_init_irq)
MACHINE_END
......@@ -162,60 +162,12 @@ static void __init
fixup_assabet(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
struct tag *t = tags;
/* This must be done before any call to machine_has_neponset() */
map_sa1100_gpio_regs();
get_assabet_scr();
if (machine_has_neponset())
printk("Neponset expansion board detected\n");
if (t->hdr.tag != ATAG_CORE) {
t->hdr.tag = ATAG_CORE;
t->hdr.size = tag_size(tag_core);
t->u.core.flags = 0;
t->u.core.pagesize = PAGE_SIZE;
t->u.core.rootdev = RAMDISK_MAJOR << 8 | 0;
t = tag_next(t);
t->hdr.tag = ATAG_MEM;
t->hdr.size = tag_size(tag_mem32);
t->u.mem.start = 0xc0000000;
t->u.mem.size = 32 * 1024 * 1024;
t = tag_next(t);
/*
* Note that Neponset RAM is slower...
* and still untested.
* This would be a candidate for
* _real_ NUMA support.
*/
if (machine_has_neponset() && 0) {
t->hdr.tag = ATAG_MEM;
t->hdr.size = tag_size(tag_mem32);
t->u.mem.start = 0xd0000000;
t->u.mem.size = 32 * 1024 * 1024;
t = tag_next(t);
}
t->hdr.tag = ATAG_RAMDISK;
t->hdr.size = tag_size(tag_ramdisk);
t->u.ramdisk.flags = 1;
t->u.ramdisk.size = 8192;
t->u.ramdisk.start = 0;
t = tag_next(t);
t->hdr.tag = ATAG_INITRD;
t->hdr.size = tag_size(tag_initrd);
t->u.initrd.start = 0xc0800000;
t->u.initrd.size = 3 * 1024 * 1024;
t = tag_next(t);
t->hdr.tag = ATAG_NONE;
t->hdr.size = 0;
}
}
......
......@@ -21,22 +21,6 @@
#include "generic.h"
static void __init
fixup_brutus(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 4*1024*1024 );
SET_BANK( 1, 0xc8000000, 4*1024*1024 );
SET_BANK( 2, 0xd0000000, 4*1024*1024 );
SET_BANK( 3, 0xd8000000, 4*1024*1024 );
mi->nr_banks = 4;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xd8000000), 3*1024*1024 );
}
static void __init brutus_map_io(void)
{
sa1100_map_io();
......@@ -51,7 +35,6 @@ static void __init brutus_map_io(void)
MACHINE_START(BRUTUS, "Intel Brutus (SA1100 eval board)")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_brutus)
MAPIO(brutus_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -35,33 +35,6 @@ static void __init cerf_init_irq(void)
set_irq_type(IRQ_GPIO_UCB1200_IRQ, IRQT_RISING);
}
static void __init
fixup_cerf(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
#if defined(CONFIG_SA1100_CERF_64MB)
SET_BANK( 0, 0xc0000000, 64*1024*1024 );
mi->nr_banks = 1;
#elif defined(CONFIG_SA1100_CERF_32MB)
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
mi->nr_banks = 1;
#elif defined(CONFIG_SA1100_CERF_16MB)
SET_BANK( 0, 0xc0000000, 8*1024*1024 );
SET_BANK( 1, 0xc8000000, 8*1024*1024 );
mi->nr_banks = 2;
#elif defined(CONFIG_SA1100_CERF_8MB)
SET_BANK( 0, 0xc0000000, 8*1024*1024 );
mi->nr_banks = 1;
#else
#error "Undefined memory size for Cerfboard."
#endif
// ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
// setup_ramdisk(1, 0, 0, 8192);
// // Save 2Meg for RAMDisk
// setup_initrd(0xc0500000, 3*1024*1024);
}
static struct map_desc cerf_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x08000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Crystal Ethernet Chip */
......@@ -96,7 +69,6 @@ static void __init cerf_map_io(void)
MACHINE_START(CERF, "Intrinsyc's Cerf Family of Products")
MAINTAINER("support@intrinsyc.com")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_cerf)
MAPIO(cerf_map_io)
INITIRQ(cerf_init_irq)
MACHINE_END
......@@ -15,20 +15,6 @@
#include "generic.h"
static void __init
fixup_empeg(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 4*1024*1024 );
SET_BANK( 1, 0xc8000000, 4*1024*1024 );
mi->nr_banks = 2;
ROOT_DEV = mk_kdev( 3, 1 ); /* /dev/hda1 */
setup_ramdisk( 1, 0, 0, 4096 );
setup_initrd( 0xd0000000+((1024-320)*1024), (320*1024) );
}
static struct map_desc empeg_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ EMPEG_FLASHBASE, 0x00000000, 0x00200000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash */
......@@ -48,7 +34,6 @@ static void __init empeg_map_io(void)
MACHINE_START(EMPEG, "empeg MP3 Car Audio Player")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_empeg)
MAPIO(empeg_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -151,21 +151,6 @@ static int __init flexanet_init(void)
__initcall(flexanet_init);
static void __init
fixup_flexanet(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
/* fixed RAM size, by now (64MB) */
SET_BANK( 0, 0xc0000000, 64*1024*1024 );
mi->nr_banks = 1;
/* setup ramdisk */
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( 0xc0800000, 3*1024*1024 );
}
static struct map_desc flexanet_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x10000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
......@@ -206,7 +191,6 @@ static void __init flexanet_map_io(void)
MACHINE_START(FLEXANET, "FlexaNet")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_flexanet)
MAPIO(flexanet_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......
......@@ -51,19 +51,6 @@ static int __init freebird_init(void)
__initcall(freebird_init);
static void __init
fixup_freebird(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
#ifdef CONFIG_SA1100_FREEBIRD_OLD
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0 ,0 , 8192 );
setup_initrd( 0xc0800000, 3*1024*1024 );
#endif
}
static struct map_desc freebird_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x12000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
......@@ -90,7 +77,6 @@ MACHINE_START(FREEBIRD, "Freebird-HPC-1.1")
#ifdef CONFIG_SA1100_FREEBIRD_NEW
BOOT_PARAMS(0xc0000100)
#endif
FIXUP(fixup_freebird)
MAPIO(freebird_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -120,23 +120,6 @@ static void __init graphicsclient_init_irq(void)
}
/*
* Initialization fixup
*/
static void __init
fixup_graphicsclient(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 16*1024*1024 );
SET_BANK( 1, 0xc8000000, 16*1024*1024 );
mi->nr_banks = 2;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
}
static struct map_desc graphicsclient_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x10000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
......@@ -216,7 +199,6 @@ static void __init graphicsclient_map_io(void)
MACHINE_START(GRAPHICSCLIENT, "ADS GraphicsClient")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_graphicsclient)
MAPIO(graphicsclient_map_io)
INITIRQ(graphicsclient_init_irq)
MACHINE_END
......@@ -152,24 +152,6 @@ static void __init graphicsmaster_init_irq(void)
}
/*
* Initialization fixup
*/
static void __init
fixup_graphicsmaster(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 16*1024*1024 );
mi->nr_banks = 1;
SET_BANK( 1, 0xc8000000, 16*1024*1024 );
mi->nr_banks = 2;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
}
static struct map_desc graphicsmaster_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x10000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
......@@ -276,7 +258,6 @@ static void __init graphicsmaster_map_io(void)
MACHINE_START(GRAPHICSMASTER, "ADS GraphicsMaster")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_graphicsmaster)
MAPIO(graphicsmaster_map_io)
INITIRQ(graphicsmaster_init_irq)
MACHINE_END
......@@ -54,22 +54,6 @@ static int __init init_huw_cs3(void)
__initcall(init_huw_cs3);
static void __init
fixup_huw_webpanel(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
/**
memory information (JOR):
32 MByte - 256KByte bootloader (init at boot time) - 32 kByte save area
**/
SET_BANK( 0, 0xc0000000, ((32*1024 - (256 + 32)) * 1024));
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xc0800000), 8*1024*1024 );
}
/**
memory information (JOR):
32 MByte - 256KByte bootloader (init at boot time) - 32 kByte save area
......@@ -95,7 +79,6 @@ static void __init huw_webpanel_map_io(void)
MACHINE_START(HUW_WEBPANEL, "HuW-Webpanel")
MAINTAINER("Roman Jordan")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_huw_webpanel)
MAPIO(huw_webpanel_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -15,18 +15,6 @@
#include "generic.h"
static void __init
fixup_itsy(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 16*1024*1024 );
SET_BANK( 1, 0xc8000000, 16*1024*1024 );
SET_BANK( 2, 0xd0000000, 16*1024*1024 );
SET_BANK( 3, 0xd8000000, 16*1024*1024 );
mi->nr_banks = 4;
}
/* BRADFIXME The egpio addresses aren't verifiably correct. (i.e. they're most
likely wrong. */
static struct map_desc itsy_io_desc[] __initdata = {
......@@ -49,7 +37,6 @@ static void __init itsy_map_io(void)
MACHINE_START(ITSY, "Compaq Itsy")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_itsy)
MAPIO(itsy_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -55,15 +55,6 @@ static int __init jornada720_init(void)
__initcall(jornada720_init);
static void __init
fixup_jornada720(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
mi->nr_banks = 1;
}
static struct map_desc jornada720_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x48000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Epson registers */
......@@ -84,7 +75,6 @@ static void __init jornada720_map_io(void)
MACHINE_START(JORNADA720, "HP Jornada 720")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_jornada720)
MAPIO(jornada720_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -15,20 +15,12 @@
#include "generic.h"
static void __init
fixup_nanoengine(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
/* Get command line parameters passed from the loader (if any) */
if( *((char*)0xc0000100) )
if (*((char*)0xc0000100))
*cmdline = ((char *)0xc0000100);
}
......
......@@ -40,18 +40,6 @@ static int __init omnimeter_init(void)
__initcall(omnimeter_init);
static void __init
fixup_omnimeter(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 16*1024*1024 );
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xd0000000), 0x00400000 );
}
static struct map_desc omnimeter_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xd2000000, 0x10000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* TS */
......@@ -69,7 +57,6 @@ static void __init omnimeter_map_io(void)
MACHINE_START(OMNIMETER, "OmniMeter")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_omnimeter)
MAPIO(omnimeter_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -15,19 +15,6 @@
#include "generic.h"
static void __init
fixup_pangolin(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 128*1024*1024 );
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 16384 );
setup_initrd( 0xc0800000, 3*1024*1024 );
}
static struct map_desc pangolin_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */
......@@ -52,7 +39,6 @@ static void __init pangolin_map_io(void)
MACHINE_START(PANGOLIN, "Dialogue-Pangolin")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_pangolin)
MAPIO(pangolin_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -55,19 +55,6 @@ static void __init pfs168_init_irq(void)
set_GPIO_IRQ_edge(GPIO_UCB1300_IRQ, GPIO_RISING_EDGE);
}
static void __init
fixup_pfs168(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 16*1024*1024 );
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( 0xc0800000, 3*1024*1024 );
}
static struct map_desc pfs168_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
......@@ -98,10 +85,7 @@ static void __init pfs168_map_io(void)
MACHINE_START(PFS168, "Tulsa")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
#if defined(CONFIG_PFS168_CMDLINE)
BOOT_PARAMS(0xc0000100)
#endif
FIXUP(fixup_pfs168)
MAPIO(pfs168_map_io)
INITIRQ(pfs168_init_irq)
MACHINE_END
......@@ -15,24 +15,6 @@
#include "generic.h"
static void __init
fixup_pleb(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK(0, 0xc0000000, 16*1024*1024);
SET_BANK(1, 0xc8000000, 16*1024*1024);
SET_BANK(2, 0xd0000000, 16*1024*1024);
SET_BANK(3, 0xd8000000, 16*1024*1024);
/* make this 4 a second memory card is used to make 64MB */
/* make it 1 if a 16MB memory card is used */
mi->nr_banks = 2; /* Default 32MB */
ROOT_DEV = mk_kdev(RAMDISK_MAJOR, 0);
setup_ramdisk(1, 0, 0, 8192);
setup_initrd(0xc0400000, 4*1024*1024);
}
static struct map_desc pleb_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* main flash memory */
......@@ -55,7 +37,6 @@ static void __init pleb_map_io(void)
MACHINE_START(PLEB, "PLEB")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_pleb)
MAPIO(pleb_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -15,20 +15,6 @@
#include "generic.h"
static void __init
fixup_sherman(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 64*1024*1024 );
SET_BANK( 1, 0xc8000000, 64*1024*1024 );
mi->nr_banks = 2;
ROOT_DEV = mk_kdev( 60, 2 );
setup_ramdisk( 1, 0, 0, 8192 );
// setup_initrd( 0xc0400000, 8*1024*1024 );
}
static void __init sherman_map_io(void)
{
sa1100_map_io();
......@@ -39,7 +25,6 @@ static void __init sherman_map_io(void)
MACHINE_START(SHERMAN, "Blazie Engineering Sherman")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_sherman)
MAPIO(sherman_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -40,22 +40,6 @@ void clear_cs3_bit(int value)
*(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow;
}
static void __init
fixup_simpad(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
#ifdef CONFIG_SA1100_SIMPAD_DRAM_64MB /* DRAM */
SET_BANK( 0, 0xc0000000, 64*1024*1024 );
#else
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
#endif
mi->nr_banks = 1;
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
}
static struct map_desc simpad_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */
......@@ -141,22 +125,14 @@ static int proc_cs3_read(char *page, char **start, off_t off,
}
static struct proc_dir_entry *proc_cs3;
static int __init cs3_init(void)
{
proc_cs3 = create_proc_entry("cs3", 0, 0);
struct proc_dir_entry *proc_cs3 = create_proc_entry("cs3", 0, 0);
if (proc_cs3)
proc_cs3->read_proc = proc_cs3_read;
return 0;
}
static int __exit cs3_exit(void)
{
if (proc_cs3)
remove_proc_entry( "cs3", 0);
return 0;
}
__initcall(cs3_init);
#endif // CONFIG_PROC_FS
......@@ -164,7 +140,6 @@ __initcall(cs3_init);
MACHINE_START(SIMPAD, "Simpad")
MAINTAINER("Juergen Messerer")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_simpad)
MAPIO(simpad_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -73,8 +73,6 @@
*/
/* init funcs */
static void __init fixup_system3(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi);
static int __init system3_init(void);
static void __init system3_init_irq(void);
static void __init system3_map_io(void);
......@@ -228,25 +226,6 @@ static int sdram_notifier(struct notifier_block *nb, unsigned long event,
return 0;
}
/**
* fixup_system3 - fixup function for system 3 board
* @desc: machine description
* @param: kernel params
* @cmdline: kernel cmdline
* @mi: memory info struct
*
*/
static void __init fixup_system3(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
DPRINTK( "%s\n", "START" );
ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
setup_ramdisk( 1, 0, 0, 8192 );
setup_initrd( 0xc0800000, 8*1024*1024 );
}
/**
* system3_uart_pm - powermgmt callback function for system 3 UART
* @port: uart port structure
......@@ -457,7 +436,6 @@ __initcall(system3_init);
MACHINE_START(PT_SYSTEM3, "PT System 3")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
BOOT_PARAMS(0xc0000100)
FIXUP(fixup_system3)
MAPIO(system3_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -56,15 +56,6 @@ static int __init xp860_init(void)
__initcall(xp860_init);
static void __init
fixup_xp860(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
SET_BANK( 0, 0xc0000000, 32*1024*1024 );
mi->nr_banks = 1;
}
static struct map_desc xp860_io_desc[] __initdata = {
/* virtual physical length domain r w c b */
{ 0xf0000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SCSI */
......@@ -84,7 +75,6 @@ static void __init xp860_map_io(void)
MACHINE_START(XP860, "XP860")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
FIXUP(fixup_xp860)
MAPIO(xp860_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -16,9 +16,6 @@
#ifndef __ASSEMBLY__
extern void setup_initrd(unsigned int start, unsigned int size);
extern void setup_ramdisk(int doload, int prompt, int start, unsigned int rd_sz);
struct tag;
struct machine_desc {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment