Merge branch 'at91/cleanup' into next/drivers

This resolves some of the obvious conflicts between the at91 cleanup and
drivers branches.

Conflicts:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-at91/at91sam9rl.c
	drivers/rtc/Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/configs/at91sam9g45_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G45=y
-CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AEABI=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-CONFIG_DAVICOM_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_QT1070=y
-CONFIG_KEYBOARD_QT2160=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_USB_G_MULTI=y
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_DMADEVICES=y
-CONFIG_AT_HDMAC=y
-CONFIG_DMATEST=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y

arch/arm/configs/at91sam9rl_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9RL=y
-CONFIG_MACH_AT91SAM9RLEK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/at91x40_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_FUTEX is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_MMU is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91X40=y
-CONFIG_MACH_AT91EB01=y
-CONFIG_AT91_EARLY_USART0=y
-CONFIG_CPU_ARM7TDMI=y
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0x01000000
-CONFIG_DRAM_SIZE=0x00400000
-CONFIG_FLASH_MEM_BASE=0x01400000
-CONFIG_PROCESSOR_ID=0x14000040
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_BINFMT_FLAT=y
-# CONFIG_SUSPEND is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/arm/mach-at91/Kconfig

@@ -18,18 +18,14 @@ config HAVE_AT91_DBGU2
 config AT91_USE_OLD_CLK
 	bool
 
-config AT91_PMC_UNIT
-	bool
-	default !ARCH_AT91X40
-
 config COMMON_CLK_AT91
 	bool
-	default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
+	default USE_OF && !AT91_USE_OLD_CLK
 	select COMMON_CLK
 
 config OLD_CLK_AT91
 	bool
-	default AT91_PMC_UNIT && AT91_USE_OLD_CLK
+	default AT91_USE_OLD_CLK
 
 config OLD_IRQ_AT91
 	bool
@@ -65,16 +61,6 @@ choice
 
 	prompt "Core type"
 
-config ARCH_AT91X40
-	bool "ARM7 AT91X40"
-	depends on !MMU
-	select CPU_ARM7TDMI
-	select ARCH_USES_GETTIMEOFFSET
-	select OLD_IRQ_AT91
-
-	help
-	  Select this if you are using one of Atmel's AT91X40 SoC.
-
 config SOC_SAM_V4_V5
 	bool "ARM9 AT91SAM9/AT91RM9200"
 	help
@@ -199,7 +185,7 @@ config SOC_AT91SAM9N12
 endif # SOC_SAM_V4_V5
 
 
-if SOC_SAM_V4_V5 || ARCH_AT91X40
+if SOC_SAM_V4_V5
 source arch/arm/mach-at91/Kconfig.non_dt
 endif
 

arch/arm/mach-at91/Kconfig.non_dt

@@ -5,7 +5,6 @@ config HAVE_AT91_DATAFLASH_CARD
 
 choice
 	prompt "Atmel AT91 Processor Devices for non DT boards"
-	depends on !ARCH_AT91X40
 
 config ARCH_AT91_NONE
 	bool "None"
@@ -34,18 +33,6 @@ config ARCH_AT91SAM9263
 	select AT91_USE_OLD_CLK
 	select OLD_IRQ_AT91
 
-config ARCH_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select SOC_AT91SAM9RL
-	select AT91_USE_OLD_CLK
-	select OLD_IRQ_AT91
-
-config ARCH_AT91SAM9G45
-	bool "AT91SAM9G45"
-	select SOC_AT91SAM9G45
-	select AT91_USE_OLD_CLK
-	select OLD_IRQ_AT91
-
 endchoice
 
 config ARCH_AT91SAM9G20
@@ -288,51 +275,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
-	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	help
-	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
-	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
-	bool "Atmel AT91EB01 Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
-	  It is also a popular target for simulators such as GDB's
-	  ARM simulator (commonly known as the ARMulator) and the
-	  Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
-
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD

arch/arm/mach-at91/Makefile

@@ -24,9 +24,6 @@ obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45_devices.o
-obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -58,9 +55,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 
-# AT91SAM9RL board-specific support
-obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
-
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
@@ -72,9 +66,6 @@ obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 
-# AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
-
 # AT91SAM board with device-tree
 obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
 obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
@@ -82,9 +73,6 @@ obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
 # SAMA5 board with device-tree
 obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
 
-# AT91X40 board-specific support
-obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
-
 # Drivers
 obj-y				+= leds.o
 

arch/arm/mach-at91/at91x40.c

-/*
- * arch/arm/mach-at91/at91x40.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <mach/at91x40.h>
-#include <mach/at91_st.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "generic.h"
-
-/*
- * Export the clock functions for the AT91X40. Some external code common
- * to all AT91 family parts relys on this, like the gpio and serial support.
- */
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return AT91X40_MASTER_CLOCK;
-}
-
-static void at91x40_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-	__raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
-	cpu_do_idle();
-}
-
-void __init at91x40_initialize(unsigned long main_clock)
-{
-	arm_pm_idle = at91x40_idle;
-}
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	0,	/* System Peripherals */
-	0,	/* USART 0 */
-	0,	/* USART 1 */
-	2,	/* Timer Counter 0 */
-	2,	/* Timer Counter 1 */
-	2,	/* Timer Counter 2 */
-	0,	/* Watchdog timer */
-	0,	/* Parallel IO Controller A */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* External IRQ0 */
-	0,	/* External IRQ1 */
-	0,	/* External IRQ2 */
-};
-
-void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	u32  extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
-			| (1 << AT91X40_ID_IRQ2);
-	if (!priority)
-		priority = at91x40_default_irq_priority;
-
-	at91_aic_init(priority, extern_irq);
-}

arch/arm/mach-at91/at91x40_time.c

-/*
- * arch/arm/mach-at91/at91x40_time.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/at91x40.h>
-#include <asm/mach/time.h>
-
-#include "at91_tc.h"
-
-#define at91_tc_read(field) \
-	__raw_readl(AT91_IO_P2V(AT91_TC) + field)
-
-#define at91_tc_write(field, value) \
-	__raw_writel(value, AT91_IO_P2V(AT91_TC) + field)
-
-/*
- *	3 counter/timer units present.
- */
-#define	AT91_TC_CLK0BASE	0
-#define	AT91_TC_CLK1BASE	0x40
-#define	AT91_TC_CLK2BASE	0x80
-
-static u32 at91x40_gettimeoffset(void)
-{
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
-		(AT91X40_MASTER_CLOCK / 128)) * 1000;
-}
-
-static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
-{
-	at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction at91x40_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_TIMER,
-	.handler	= at91x40_timer_interrupt
-};
-
-void __init at91x40_timer_init(void)
-{
-	unsigned int v;
-
-	arch_gettimeoffset = at91x40_gettimeoffset;
-
-	at91_tc_write(AT91_TC_BCR, 0);
-	v = at91_tc_read(AT91_TC_BMR);
-	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
-	at91_tc_write(AT91_TC_BMR, v);
-
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
-
-	setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
-
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
-}

arch/arm/mach-at91/board-eb01.c

-/*
- * arch/arm/mach-at91/board-eb01.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-
-static void __init at91eb01_init_irq(void)
-{
-	at91x40_init_interrupts(NULL);
-}
-
-static void __init at91eb01_init_early(void)
-{
-	at91x40_initialize(40000000);
-}
-
-MACHINE_START(AT91EB01, "Atmel AT91 EB01")
-	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-	.init_time	= at91x40_timer_init,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= at91eb01_init_early,
-	.init_irq	= at91eb01_init_irq,
-MACHINE_END
-

arch/arm/mach-at91/generic.h

@@ -24,14 +24,12 @@ extern void __init at91_init_sram(int bank, unsigned long base,
  /* Processors */
 extern void __init at91rm9200_set_type(int type);
 extern void __init at91_initialize(unsigned long main_clock);
-extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91rm9200_dt_initialize(void);
 extern void __init at91_dt_initialize(void);
 
  /* Interrupts */
 extern void __init at91_init_irq_default(void);
 extern void __init at91_init_interrupts(unsigned int priority[]);
-extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[],
 				 unsigned int ext_irq_mask);
 extern int  __init at91_aic_of_init(struct device_node *node,
@@ -50,7 +48,6 @@ extern void at91rm9200_ioremap_st(u32 addr);
 extern void at91rm9200_timer_init(void);
 extern void at91sam926x_ioremap_pit(u32 addr);
 extern void at91sam926x_pit_init(int irq);
-extern void at91x40_timer_init(void);
 
  /* Clocks */
 #ifdef CONFIG_OLD_CLK_AT91

arch/arm/mach-at91/include/mach/at91_dbgu.h

@@ -16,7 +16,6 @@
 #ifndef AT91_DBGU_H
 #define AT91_DBGU_H
 
-#if !defined(CONFIG_ARCH_AT91X40)
 #define AT91_DBGU_CR		(0x00)	/* Control Register */
 #define AT91_DBGU_MR		(0x04)	/* Mode Register */
 #define AT91_DBGU_IER		(0x08)	/* Interrupt Enable Register */
@@ -34,8 +33,6 @@
 #define AT91_DBGU_FNR		(0x48)	/* Force NTRST Register [SAM9 only] */
 #define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
 
-#endif /* AT91_DBGU */
-
 /*
  * Some AT91 parts that don't have full DEBUG units still support the ID
  * and extensions register.

arch/arm/mach-at91/include/mach/at91x40.h

-/*
- * arch/arm/mach-at91/include/mach/at91x40.h
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91X40_H
-#define AT91X40_H
-
-/*
- *	IRQ list.
- */
-#define AT91X40_ID_USART0	2	/* USART port 0 */
-#define AT91X40_ID_USART1	3	/* USART port 1 */
-#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
-#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
-#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
-#define AT91X40_ID_WD		7	/* Watchdog? */
-#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
-
-#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
-#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
-#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
-
-/*
- * System Peripherals
- */
-#define AT91_BASE_SYS	0xffc00000
-
-#define AT91_EBI	0xffe00000	/* External Bus Interface */
-#define AT91_SF		0xfff00000	/* Special Function */
-#define AT91_USART1	0xfffcc000	/* USART 1 */
-#define AT91_USART0	0xfffd0000	/* USART 0 */
-#define AT91_TC		0xfffe0000	/* Timer Counter */
-#define AT91_PIOA	0xffff0000	/* PIO Controller A */
-#define AT91_PS		0xffff4000	/* Power Save */
-#define AT91_WD		0xffff8000	/* Watchdog Timer */
-
-/*
- * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
- * But it does have a chip identify register and extension ID, so define at
- * least these here.
- */
-#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
-#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
-
-/*
- * Support defines for the simple Power Controller module.
- */
-#define	AT91_PS_CR	(AT91_PS + 0)	/* PS Control register */
-#define	AT91_PS_CR_CPU	(1 << 0)	/* CPU clock disable bit */
-
-#define AT91X40_MASTER_CLOCK	40000000
-
-#endif /* AT91X40_H */

arch/arm/mach-at91/include/mach/cpu.h

@@ -62,7 +62,6 @@
 #define ARCH_EXID_SAMA5D43	0x00000003
 #define ARCH_EXID_SAMA5D44	0x00000004
 
-#define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
 #define ARCH_FAMILY_AT91SAM9XE	0x02900000
 

arch/arm/mach-at91/include/mach/hardware.h

@@ -24,9 +24,6 @@
 /* sama5d4 */
 #define AT91_BASE_DBGU2	0xfc069000
 
-#if defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
 #include <mach/at91rm9200.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9261.h>
@@ -51,8 +48,6 @@
  */
 #define AT91_BASE_SYS	0xffffc000
 
-#endif
-
 /*
  * On sama5d4 there is no system controller, we map some needed peripherals
  */

arch/arm/mach-at91/include/mach/uncompress.h

@@ -31,7 +31,6 @@
 
 void __iomem *at91_uart;
 
-#if !defined(CONFIG_ARCH_AT91X40)
 static const u32 uarts_rm9200[] = {
 	AT91_BASE_DBGU0,
 	AT91RM9200_BASE_US0,
@@ -188,12 +187,6 @@ static inline void arch_decomp_setup(void)
 
 	at91_uart = NULL;
 }
-#else
-static inline void arch_decomp_setup(void)
-{
-	at91_uart = NULL;
-}
-#endif
 
 /*
  * The following code assumes the serial port has already been

arch/arm/mach-at91/setup.c

@@ -418,7 +418,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
 		panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
 }
 
-#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
+#if defined(CONFIG_OF)
 static struct of_device_id ramc_ids[] = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },

drivers/rtc/Kconfig

@@ -1110,7 +1110,7 @@ config RTC_DRV_AT91RM9200
 
 config RTC_DRV_AT91SAM9
 	tristate "AT91SAM9 RTT as RTC"
-	depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
+	depends on ARCH_AT91 && !ARCH_AT91RM9200
 	select MFD_SYSCON
 	help
 	  Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which