Commit 4b586a38 authored by Jonathan Corbet's avatar Jonathan Corbet Committed by Mauro Carvalho Chehab

V4L/DVB: V4L2: Add a document describing the videobuf layer

Videobuf is a moderately complex API which most V4L2 drivers should use,
but its documentation is...sparse.  This document attempts to improve the
situation.
Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
Reviewed-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 995f5fef
......@@ -599,99 +599,14 @@ video_device::minor fields.
video buffer helper functions
-----------------------------
The v4l2 core API provides a standard method for dealing with video
buffers. Those methods allow a driver to implement read(), mmap() and
overlay() on a consistent way.
There are currently methods for using video buffers on devices that
supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
linear access (videobuf-dma-contig), and vmalloced buffers, mostly
used on USB drivers (videobuf-vmalloc).
Any driver using videobuf should provide operations (callbacks) for
four handlers:
ops->buf_setup - calculates the size of the video buffers and avoid they
to waste more than some maximum limit of RAM;
ops->buf_prepare - fills the video buffer structs and calls
videobuf_iolock() to alloc and prepare mmaped memory;
ops->buf_queue - advices the driver that another buffer were
requested (by read() or by QBUF);
ops->buf_release - frees any buffer that were allocated.
In order to use it, the driver need to have a code (generally called at
interrupt context) that will properly handle the buffer request lists,
announcing that a new buffer were filled.
The irq handling code should handle the videobuf task lists, in order
to advice videobuf that a new frame were filled, in order to honor to a
request. The code is generally like this one:
if (list_empty(&dma_q->active))
return;
buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
if (!waitqueue_active(&buf->vb.done))
return;
/* Some logic to handle the buf may be needed here */
list_del(&buf->vb.queue);
do_gettimeofday(&buf->vb.ts);
wake_up(&buf->vb.done);
Those are the videobuffer functions used on drivers, implemented on
videobuf-core:
- Videobuf init functions
videobuf_queue_sg_init()
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on drivers that uses DMA
Scatter/Gather buffers.
videobuf_queue_dma_contig_init
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on drivers that need DMA
contiguous buffers.
videobuf_queue_vmalloc_init()
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on USB (and other drivers)
that need a vmalloced type of videobuf.
- videobuf_iolock()
Prepares the videobuf memory for the proper method (read, mmap, overlay).
- videobuf_queue_is_busy()
Checks if a videobuf is streaming.
- videobuf_queue_cancel()
Stops video handling.
- videobuf_mmap_free()
frees mmap buffers.
- videobuf_stop()
Stops video handling, ends mmap and frees mmap and other buffers.
- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
videobuf_cgmbuf()
This function is used to provide backward compatibility with V4L1
API.
- Some help functions for read()/poll() operations:
videobuf_read_stream()
For continuous stream read()
videobuf_read_one()
For snapshot read()
videobuf_poll_stream()
polling help function
The better way to understand it is to take a look at vivi driver. One
of the main reasons for vivi is to be a videobuf usage example. the
vivi_thread_tick() does the task that the IRQ callback would do on PCI
drivers (or the irq callback on USB).
The v4l2 core API provides a set of standard methods (called "videobuf")
for dealing with video buffers. Those methods allow a driver to implement
read(), mmap() and overlay() in a consistent way. There are currently
methods for using video buffers on devices that supports DMA with
scatter/gather method (videobuf-dma-sg), DMA with linear access
(videobuf-dma-contig), and vmalloced buffers, mostly used on USB drivers
(videobuf-vmalloc).
Please see Documentation/video4linux/videobuf for more information on how
to use the videobuf layer.
An introduction to the videobuf layer
Jonathan Corbet <corbet@lwn.net>
Current as of 2.6.33
The videobuf layer functions as a sort of glue layer between a V4L2 driver
and user space. It handles the allocation and management of buffers for
the storage of video frames. There is a set of functions which can be used
to implement many of the standard POSIX I/O system calls, including read(),
poll(), and, happily, mmap(). Another set of functions can be used to
implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
including buffer allocation, queueing and dequeueing, and streaming
control. Using videobuf imposes a few design decisions on the driver
author, but the payback comes in the form of reduced code in the driver and
a consistent implementation of the V4L2 user-space API.
Buffer types
Not all video devices use the same kind of buffers. In fact, there are (at
least) three common variations:
- Buffers which are scattered in both the physical and (kernel) virtual
address spaces. (Almost) all user-space buffers are like this, but it
makes great sense to allocate kernel-space buffers this way as well when
it is possible. Unfortunately, it is not always possible; working with
this kind of buffer normally requires hardware which can do
scatter/gather DMA operations.
- Buffers which are physically scattered, but which are virtually
contiguous; buffers allocated with vmalloc(), in other words. These
buffers are just as hard to use for DMA operations, but they can be
useful in situations where DMA is not available but virtually-contiguous
buffers are convenient.
- Buffers which are physically contiguous. Allocation of this kind of
buffer can be unreliable on fragmented systems, but simpler DMA
controllers cannot deal with anything else.
Videobuf can work with all three types of buffers, but the driver author
must pick one at the outset and design the driver around that decision.
[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
which are located within the system's video memory. The overlay
functionality is considered to be deprecated for most use, but it still
shows up occasionally in system-on-chip drivers where the performance
benefits merit the use of this technique. Overlay buffers can be handled
as a form of scattered buffer, but there are very few implementations in
the kernel and a description of this technique is currently beyond the
scope of this document.]
Data structures, callbacks, and initialization
Depending on which type of buffers are being used, the driver should
include one of the following files:
<media/videobuf-dma-sg.h> /* Physically scattered */
<media/videobuf-vmalloc.h> /* vmalloc() buffers */
<media/videobuf-dma-contig.h> /* Physically contiguous */
The driver's data structure describing a V4L2 device should include a
struct videobuf_queue instance for the management of the buffer queue,
along with a list_head for the queue of available buffers. There will also
need to be an interrupt-safe spinlock which is used to protect (at least)
the queue.
The next step is to write four simple callbacks to help videobuf deal with
the management of buffers:
struct videobuf_queue_ops {
int (*buf_setup)(struct videobuf_queue *q,
unsigned int *count, unsigned int *size);
int (*buf_prepare)(struct videobuf_queue *q,
struct videobuf_buffer *vb,
enum v4l2_field field);
void (*buf_queue)(struct videobuf_queue *q,
struct videobuf_buffer *vb);
void (*buf_release)(struct videobuf_queue *q,
struct videobuf_buffer *vb);
};
buf_setup() is called early in the I/O process, when streaming is being
initiated; its purpose is to tell videobuf about the I/O stream. The count
parameter will be a suggested number of buffers to use; the driver should
check it for rationality and adjust it if need be. As a practical rule, a
minimum of two buffers are needed for proper streaming, and there is
usually a maximum (which cannot exceed 32) which makes sense for each
device. The size parameter should be set to the expected (maximum) size
for each frame of data.
Each buffer (in the form of a struct videobuf_buffer pointer) will be
passed to buf_prepare(), which should set the buffer's size, width, height,
and field fields properly. If the buffer's state field is
VIDEOBUF_NEEDS_INIT, the driver should pass it to:
int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
struct v4l2_framebuffer *fbuf);
Among other things, this call will usually allocate memory for the buffer.
Finally, the buf_prepare() function should set the buffer's state to
VIDEOBUF_PREPARED.
When a buffer is queued for I/O, it is passed to buf_queue(), which should
put it onto the driver's list of available buffers and set its state to
VIDEOBUF_QUEUED. Note that this function is called with the queue spinlock
held; if it tries to acquire it as well things will come to a screeching
halt. Yes, this is the voice of experience. Note also that videobuf may
wait on the first buffer in the queue; placing other buffers in front of it
could again gum up the works. So use list_add_tail() to enqueue buffers.
Finally, buf_release() is called when a buffer is no longer intended to be
used. The driver should ensure that there is no I/O active on the buffer,
then pass it to the appropriate free routine(s):
/* Scatter/gather drivers */
int videobuf_dma_unmap(struct videobuf_queue *q,
struct videobuf_dmabuf *dma);
int videobuf_dma_free(struct videobuf_dmabuf *dma);
/* vmalloc drivers */
void videobuf_vmalloc_free (struct videobuf_buffer *buf);
/* Contiguous drivers */
void videobuf_dma_contig_free(struct videobuf_queue *q,
struct videobuf_buffer *buf);
One way to ensure that a buffer is no longer under I/O is to pass it to:
int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
should be used (it should be zero in the buf_release() case), and intr
controls whether an interruptible wait is used.
File operations
At this point, much of the work is done; much of the rest is slipping
videobuf calls into the implementation of the other driver callbacks. The
first step is in the open() function, which must initialize the
videobuf queue. The function to use depends on the type of buffer used:
void videobuf_queue_sg_init(struct videobuf_queue *q,
struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
unsigned int msize,
void *priv);
void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
unsigned int msize,
void *priv);
void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
unsigned int msize,
void *priv);
In each case, the parameters are the same: q is the queue structure for the
device, ops is the set of callbacks as described above, dev is the device
structure for this video device, irqlock is an interrupt-safe spinlock to
protect access to the data structures, type is the buffer type used by the
device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
describes which field is being captured (often V4L2_FIELD_NONE for
progressive devices), msize is the size of any containing structure used
around struct videobuf_buffer, and priv is a private data pointer which
shows up in the priv_data field of struct videobuf_queue. Note that these
are void functions which, evidently, are immune to failure.
V4L2 capture drivers can be written to support either of two APIs: the
read() system call and the rather more complicated streaming mechanism. As
a general rule, it is necessary to support both to ensure that all
applications have a chance of working with the device. Videobuf makes it
easy to do that with the same code. To implement read(), the driver need
only make a call to one of:
ssize_t videobuf_read_one(struct videobuf_queue *q,
char __user *data, size_t count,
loff_t *ppos, int nonblocking);
ssize_t videobuf_read_stream(struct videobuf_queue *q,
char __user *data, size_t count,
loff_t *ppos, int vbihack, int nonblocking);
Either one of these functions will read frame data into data, returning the
amount actually read; the difference is that videobuf_read_one() will only
read a single frame, while videobuf_read_stream() will read multiple frames
if they are needed to satisfy the count requested by the application. A
typical driver read() implementation will start the capture engine, call
one of the above functions, then stop the engine before returning (though a
smarter implementation might leave the engine running for a little while in
anticipation of another read() call happening in the near future).
The poll() function can usually be implemented with a direct call to:
unsigned int videobuf_poll_stream(struct file *file,
struct videobuf_queue *q,
poll_table *wait);
Note that the actual wait queue eventually used will be the one associated
with the first available buffer.
When streaming I/O is done to kernel-space buffers, the driver must support
the mmap() system call to enable user space to access the data. In many
V4L2 drivers, the often-complex mmap() implementation simplifies to a
single call to:
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma);
Everything else is handled by the videobuf code.
The release() function requires two separate videobuf calls:
void videobuf_stop(struct videobuf_queue *q);
int videobuf_mmap_free(struct videobuf_queue *q);
The call to videobuf_stop() terminates any I/O in progress - though it is
still up to the driver to stop the capture engine. The call to
videobuf_mmap_free() will ensure that all buffers have been unmapped; if
so, they will all be passed to the buf_release() callback. If buffers
remain mapped, videobuf_mmap_free() returns an error code instead. The
purpose is clearly to cause the closing of the file descriptor to fail if
buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
ignores its return value.
ioctl() operations
The V4L2 API includes a very long list of driver callbacks to respond to
the many ioctl() commands made available to user space. A number of these
- those associated with streaming I/O - turn almost directly into videobuf
calls. The relevant helper functions are:
int videobuf_reqbufs(struct videobuf_queue *q,
struct v4l2_requestbuffers *req);
int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
int nonblocking);
int videobuf_streamon(struct videobuf_queue *q);
int videobuf_streamoff(struct videobuf_queue *q);
int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf,
int count);
So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
vidioc_reqbufs() callback which, in turn, usually only needs to locate the
proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
These support functions can replace a great deal of buffer management
boilerplate in a lot of V4L2 drivers.
The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
complex, of course, since they will also need to deal with starting and
stopping the capture engine. videobuf_cgmbuf(), called from the driver's
vidiocgmbuf() function, only exists if the V4L1 compatibility module has
been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded
with #ifdef directives.
Buffer allocation
Thus far, we have talked about buffers, but have not looked at how they are
allocated. The scatter/gather case is the most complex on this front. For
allocation, the driver can leave buffer allocation entirely up to the
videobuf layer; in this case, buffers will be allocated as anonymous
user-space pages and will be very scattered indeed. If the application is
using user-space buffers, no allocation is needed; the videobuf layer will
take care of calling get_user_pages() and filling in the scatterlist array.
If the driver needs to do its own memory allocation, it should be done in
the vidioc_reqbufs() function, *after* calling videobuf_reqbufs(). The
first step is a call to:
struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
The returned videobuf_dmabuf structure (defined in
<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
struct scatterlist *sglist;
int sglen;
The driver must allocate an appropriately-sized scatterlist array and
populate it with pointers to the pieces of the allocated buffer; sglen
should be set to the length of the array.
Drivers using the vmalloc() method need not (and cannot) concern themselves
with buffer allocation at all; videobuf will handle those details. The
same is normally true of contiguous-DMA drivers as well; videobuf will
allocate the buffers (with dma_alloc_coherent()) when it sees fit. That
means that these drivers may be trying to do high-order allocations at any
time, an operation which is not always guaranteed to work. Some drivers
play tricks by allocating DMA space at system boot time; videobuf does not
currently play well with those drivers.
As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
as long as that buffer is physically contiguous. Normal user-space
allocations will not meet that criterion, but buffers obtained from other
kernel drivers, or those contained within huge pages, will work with these
drivers.
Filling the buffers
The final part of a videobuf implementation has no direct callback - it's
the portion of the code which actually puts frame data into the buffers,
usually in response to interrupts from the device. For all types of
drivers, this process works approximately as follows:
- Obtain the next available buffer and make sure that somebody is actually
waiting for it.
- Get a pointer to the memory and put video data there.
- Mark the buffer as done and wake up the process waiting for it.
Step (1) above is done by looking at the driver-managed list_head structure
- the one which is filled in the buf_queue() callback. Because starting
the engine and enqueueing buffers are done in separate steps, it's possible
for the engine to be running without any buffers available - in the
vmalloc() case especially. So the driver should be prepared for the list
to be empty. It is equally possible that nobody is yet interested in the
buffer; the driver should not remove it from the list or fill it until a
process is waiting on it. That test can be done by examining the buffer's
done field (a wait_queue_head_t structure) with waitqueue_active().
A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
DMA; that ensures that the videobuf layer will not try to do anything with
it while the device is transferring data.
For scatter/gather drivers, the needed memory pointers will be found in the
scatterlist structure described above. Drivers using the vmalloc() method
can get a memory pointer with:
void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
For contiguous DMA drivers, the function to use is:
dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
The contiguous DMA API goes out of its way to hide the kernel-space address
of the DMA buffer from drivers.
The final step is to set the size field of the relevant videobuf_buffer
structure to the actual size of the captured image, set state to
VIDEOBUF_DONE, then call wake_up() on the done queue. At this point, the
buffer is owned by the videobuf layer and the driver should not touch it
again.
Developers who are interested in more information can go into the relevant
header files; there are a few low-level functions declared there which have
not been talked about here. Also worthwhile is the vivi driver
(drivers/media/video/vivi.c), which is maintained as an example of how V4L2
drivers should be written. Vivi only uses the vmalloc() API, but it's good
enough to get started with. Note also that all of these calls are exported
GPL-only, so they will not be available to non-GPL kernel modules.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment