Commit 4cbe4dac authored by Jack Morgenstein's avatar Jack Morgenstein Committed by David S. Miller

net/mlx4_core: Avoid delays during VF driver device shutdown

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.

The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).

The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.

This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.

Fixes: d585df1c ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: default avatarSimon Xiao <sixiao@microsoft.com>
Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b124f413
...@@ -2305,6 +2305,17 @@ static int sync_toggles(struct mlx4_dev *dev) ...@@ -2305,6 +2305,17 @@ static int sync_toggles(struct mlx4_dev *dev)
rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read)); rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read));
if (wr_toggle == 0xffffffff || rd_toggle == 0xffffffff) { if (wr_toggle == 0xffffffff || rd_toggle == 0xffffffff) {
/* PCI might be offline */ /* PCI might be offline */
/* If device removal has been requested,
* do not continue retrying.
*/
if (dev->persist->interface_state &
MLX4_INTERFACE_STATE_NOWAIT) {
mlx4_warn(dev,
"communication channel is offline\n");
return -EIO;
}
msleep(100); msleep(100);
wr_toggle = swab32(readl(&priv->mfunc.comm-> wr_toggle = swab32(readl(&priv->mfunc.comm->
slave_write)); slave_write));
......
...@@ -1940,6 +1940,14 @@ static int mlx4_comm_check_offline(struct mlx4_dev *dev) ...@@ -1940,6 +1940,14 @@ static int mlx4_comm_check_offline(struct mlx4_dev *dev)
(u32)(1 << COMM_CHAN_OFFLINE_OFFSET)); (u32)(1 << COMM_CHAN_OFFLINE_OFFSET));
if (!offline_bit) if (!offline_bit)
return 0; return 0;
/* If device removal has been requested,
* do not continue retrying.
*/
if (dev->persist->interface_state &
MLX4_INTERFACE_STATE_NOWAIT)
break;
/* There are cases as part of AER/Reset flow that PF needs /* There are cases as part of AER/Reset flow that PF needs
* around 100 msec to load. We therefore sleep for 100 msec * around 100 msec to load. We therefore sleep for 100 msec
* to allow other tasks to make use of that CPU during this * to allow other tasks to make use of that CPU during this
...@@ -3955,6 +3963,9 @@ static void mlx4_remove_one(struct pci_dev *pdev) ...@@ -3955,6 +3963,9 @@ static void mlx4_remove_one(struct pci_dev *pdev)
struct devlink *devlink = priv_to_devlink(priv); struct devlink *devlink = priv_to_devlink(priv);
int active_vfs = 0; int active_vfs = 0;
if (mlx4_is_slave(dev))
persist->interface_state |= MLX4_INTERFACE_STATE_NOWAIT;
mutex_lock(&persist->interface_state_mutex); mutex_lock(&persist->interface_state_mutex);
persist->interface_state |= MLX4_INTERFACE_STATE_DELETION; persist->interface_state |= MLX4_INTERFACE_STATE_DELETION;
mutex_unlock(&persist->interface_state_mutex); mutex_unlock(&persist->interface_state_mutex);
......
...@@ -476,6 +476,7 @@ enum { ...@@ -476,6 +476,7 @@ enum {
enum { enum {
MLX4_INTERFACE_STATE_UP = 1 << 0, MLX4_INTERFACE_STATE_UP = 1 << 0,
MLX4_INTERFACE_STATE_DELETION = 1 << 1, MLX4_INTERFACE_STATE_DELETION = 1 << 1,
MLX4_INTERFACE_STATE_NOWAIT = 1 << 2,
}; };
#define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \ #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment