tools/power/turbostat: Fix failure with new uncore sysfs

On some platforms, turbostat fails during launch time like below,

turbostat version 2023.03.17 - Len Brown <lenb@kernel.org>
...
cpu40: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0000 (24 C)
cpu40: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
turbostat: snapshot_sysfs_counter(/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz): No data available

This is because new uncore sysfs is used on these platforms as
introduced by commit 9b8dea80 ("platform/x86/intel-uncore-freq:
Support for cluster level controls").

With the new uncore sysfs interface,
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz
is still available, but reading it fails.

How to support the fabric cluster level uncore sysfs is not settled yet,
as a short term fix, clear the BIC_UNCORE_MHZ bit when new sysfs I/F is
detected.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>

tools/power/x86/turbostat/turbostat.c

@@ -4163,6 +4163,10 @@ static void intel_uncore_frequency_probe(void)
 	if (access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00", R_OK))
 		return;
 
+	/* Cluster level sysfs not supported yet. */
+	if (!access("/sys/devices/system/cpu/intel_uncore_frequency/uncore00", R_OK))
+		return;
+
 	if (!access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz", R_OK))
 		BIC_PRESENT(BIC_UNCORE_MHZ);