Commit 4d5616ca authored by Xia Kaixu's avatar Xia Kaixu Committed by Greg Kroah-Hartman

coresight: adding basic support for D01 board

Support for 16 PTMs, funnel, TPIU and replicator connected
to the ETB are included.
Signed-off-by: default avatarXia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: default avatarMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0bec8d82
...@@ -190,6 +190,12 @@ clk_168m: clk_168m { ...@@ -190,6 +190,12 @@ clk_168m: clk_168m {
clock-frequency = <168000000>; clock-frequency = <168000000>;
}; };
clk_375m: clk_375m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <375000000>;
};
soc { soc {
/* It's a 32-bit SoC. */ /* It's a 32-bit SoC. */
#address-cells = <1>; #address-cells = <1>;
...@@ -264,4 +270,715 @@ sata0: sata@a000000 { ...@@ -264,4 +270,715 @@ sata0: sata@a000000 {
}; };
}; };
etb@0,e3c42000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0xe3c42000 0 0x1000>;
coresight-default-sink;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
port {
etb0_in_port: endpoint@0 {
slave-mode;
remote-endpoint = <&replicator0_out_port0>;
};
};
};
etb@0,e3c82000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0xe3c82000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
port {
etb1_in_port: endpoint@0 {
slave-mode;
remote-endpoint = <&replicator1_out_port0>;
};
};
};
etb@0,e3cc2000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0xe3cc2000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
port {
etb2_in_port: endpoint@0 {
slave-mode;
remote-endpoint = <&replicator2_out_port0>;
};
};
};
etb@0,e3d02000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0 0xe3d02000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
port {
etb3_in_port: endpoint@0 {
slave-mode;
remote-endpoint = <&replicator3_out_port0>;
};
};
};
tpiu@0,e3c05000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0xe3c05000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
port {
tpiu_in_port: endpoint@0 {
slave-mode;
remote-endpoint = <&funnel4_out_port0>;
};
};
};
replicator0 {
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator0_out_port0: endpoint {
remote-endpoint = <&etb0_in_port>;
};
};
port@1 {
reg = <1>;
replicator0_out_port1: endpoint {
remote-endpoint = <&funnel4_in_port0>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator0_in_port0: endpoint {
slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
};
};
replicator1 {
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator1_out_port0: endpoint {
remote-endpoint = <&etb1_in_port>;
};
};
port@1 {
reg = <1>;
replicator1_out_port1: endpoint {
remote-endpoint = <&funnel4_in_port1>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator1_in_port0: endpoint {
slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
};
};
replicator2 {
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator2_out_port0: endpoint {
remote-endpoint = <&etb2_in_port>;
};
};
port@1 {
reg = <1>;
replicator2_out_port1: endpoint {
remote-endpoint = <&funnel4_in_port2>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator2_in_port0: endpoint {
slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
};
};
replicator3 {
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator3_out_port0: endpoint {
remote-endpoint = <&etb3_in_port>;
};
};
port@1 {
reg = <1>;
replicator3_out_port1: endpoint {
remote-endpoint = <&funnel4_in_port3>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator3_in_port0: endpoint {
slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
};
};
funnel@0,e3c41000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0xe3c41000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* funnel output port */
port@0 {
reg = <0>;
funnel0_out_port0: endpoint {
remote-endpoint =
<&replicator0_in_port0>;
};
};
/* funnel input ports */
port@1 {
reg = <0>;
funnel0_in_port0: endpoint {
slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
port@2 {
reg = <1>;
funnel0_in_port1: endpoint {
slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
port@3 {
reg = <2>;
funnel0_in_port2: endpoint {
slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
port@4 {
reg = <3>;
funnel0_in_port3: endpoint {
slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
};
};
funnel@0,e3c81000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0xe3c81000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* funnel output port */
port@0 {
reg = <0>;
funnel1_out_port0: endpoint {
remote-endpoint =
<&replicator1_in_port0>;
};
};
/* funnel input ports */
port@1 {
reg = <0>;
funnel1_in_port0: endpoint {
slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
port@2 {
reg = <1>;
funnel1_in_port1: endpoint {
slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
port@3 {
reg = <2>;
funnel1_in_port2: endpoint {
slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
port@4 {
reg = <3>;
funnel1_in_port3: endpoint {
slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
};
};
funnel@0,e3cc1000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0xe3cc1000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* funnel output port */
port@0 {
reg = <0>;
funnel2_out_port0: endpoint {
remote-endpoint =
<&replicator2_in_port0>;
};
};
/* funnel input ports */
port@1 {
reg = <0>;
funnel2_in_port0: endpoint {
slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
port@2 {
reg = <1>;
funnel2_in_port1: endpoint {
slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
port@3 {
reg = <2>;
funnel2_in_port2: endpoint {
slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
port@4 {
reg = <3>;
funnel2_in_port3: endpoint {
slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
};
};
funnel@0,e3d01000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0xe3d01000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* funnel output port */
port@0 {
reg = <0>;
funnel3_out_port0: endpoint {
remote-endpoint =
<&replicator3_in_port0>;
};
};
/* funnel input ports */
port@1 {
reg = <0>;
funnel3_in_port0: endpoint {
slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
port@2 {
reg = <1>;
funnel3_in_port1: endpoint {
slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
port@3 {
reg = <2>;
funnel3_in_port2: endpoint {
slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
port@4 {
reg = <3>;
funnel3_in_port3: endpoint {
slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
};
};
funnel@0,e3c04000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0xe3c04000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* funnel output port */
port@0 {
reg = <0>;
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
/* funnel input ports */
port@1 {
reg = <0>;
funnel4_in_port0: endpoint {
slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
port@2 {
reg = <1>;
funnel4_in_port1: endpoint {
slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
port@3 {
reg = <2>;
funnel4_in_port2: endpoint {
slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
port@4 {
reg = <3>;
funnel4_in_port3: endpoint {
slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
};
};
};
ptm@0,e3c7c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3c7c000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
port {
ptm0_out_port: endpoint {
remote-endpoint = <&funnel0_in_port0>;
};
};
};
ptm@0,e3c7d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3c7d000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
port {
ptm1_out_port: endpoint {
remote-endpoint = <&funnel0_in_port1>;
};
};
};
ptm@0,e3c7e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3c7e000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
port {
ptm2_out_port: endpoint {
remote-endpoint = <&funnel0_in_port2>;
};
};
};
ptm@0,e3c7f000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3c7f000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
port {
ptm3_out_port: endpoint {
remote-endpoint = <&funnel0_in_port3>;
};
};
};
ptm@0,e3cbc000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cbc000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
port {
ptm4_out_port: endpoint {
remote-endpoint = <&funnel1_in_port0>;
};
};
};
ptm@0,e3cbd000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cbd000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
port {
ptm5_out_port: endpoint {
remote-endpoint = <&funnel1_in_port1>;
};
};
};
ptm@0,e3cbe000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cbe000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
port {
ptm6_out_port: endpoint {
remote-endpoint = <&funnel1_in_port2>;
};
};
};
ptm@0,e3cbf000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cbf000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
port {
ptm7_out_port: endpoint {
remote-endpoint = <&funnel1_in_port3>;
};
};
};
ptm@0,e3cfc000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cfc000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
port {
ptm8_out_port: endpoint {
remote-endpoint = <&funnel2_in_port0>;
};
};
};
ptm@0,e3cfd000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cfd000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
port {
ptm9_out_port: endpoint {
remote-endpoint = <&funnel2_in_port1>;
};
};
};
ptm@0,e3cfe000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cfe000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
port {
ptm10_out_port: endpoint {
remote-endpoint = <&funnel2_in_port2>;
};
};
};
ptm@0,e3cff000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3cff000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
port {
ptm11_out_port: endpoint {
remote-endpoint = <&funnel2_in_port3>;
};
};
};
ptm@0,e3d3c000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3d3c000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
port {
ptm12_out_port: endpoint {
remote-endpoint = <&funnel3_in_port0>;
};
};
};
ptm@0,e3d3d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3d3d000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
port {
ptm13_out_port: endpoint {
remote-endpoint = <&funnel3_in_port1>;
};
};
};
ptm@0,e3d3e000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3d3e000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
port {
ptm14_out_port: endpoint {
remote-endpoint = <&funnel3_in_port2>;
};
};
};
ptm@0,e3d3f000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0 0xe3d3f000 0 0x1000>;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
port {
ptm15_out_port: endpoint {
remote-endpoint = <&funnel3_in_port3>;
};
};
};
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment