Commit 4d85529d authored by Ben Widawsky's avatar Ben Widawsky Committed by Keith Packard

drm/i915: drpc debugfs update for gen6

Many of the old fields from Ironlake have gone away. Strip all those
fields, and try to update to fields people care about. RC information
isn't exactly ideal anymore. All we can guarantee when we read the
register is that we're not using forcewake, ie. the software isn't
forcing the hardware to stay awake. The downside is that in doing this
we may wait a while and that causes an unnaturally idle state on the
GPU.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578Signed-off-by: default avatarBen Widawsky <ben@bwidawsk.net>
Reviewed-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarKeith Packard <keithp@keithp.com>
parent 6ed55ee7
......@@ -1001,7 +1001,7 @@ static int i915_inttoext_table(struct seq_file *m, void *unused)
return 0;
}
static int i915_drpc_info(struct seq_file *m, void *unused)
static int ironlake_drpc_info(struct seq_file *m)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
......@@ -1068,6 +1068,90 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
return 0;
}
static int gen6_drpc_info(struct seq_file *m)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 rpmodectl1, gt_core_status, rcctl1;
int count=0, ret;
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
return ret;
if (atomic_read(&dev_priv->forcewake_count)) {
seq_printf(m, "RC information inaccurate because userspace "
"holds a reference \n");
} else {
/* NB: we cannot use forcewake, else we read the wrong values */
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
udelay(10);
seq_printf(m, "RC information accurate: %s\n", yesno(count < 51));
}
gt_core_status = readl(dev_priv->regs + GEN6_GT_CORE_STATUS);
trace_i915_reg_rw(false, GEN6_GT_CORE_STATUS, gt_core_status, 4);
rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
rcctl1 = I915_READ(GEN6_RC_CONTROL);
mutex_unlock(&dev->struct_mutex);
seq_printf(m, "Video Turbo Mode: %s\n",
yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
seq_printf(m, "HW control enabled: %s\n",
yesno(rpmodectl1 & GEN6_RP_ENABLE));
seq_printf(m, "SW control enabled: %s\n",
yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
GEN6_RP_MEDIA_SW_MODE));
seq_printf(m, "RC6 Enabled: %s\n",
yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
seq_printf(m, "RC6 Enabled: %s\n",
yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE));
seq_printf(m, "Deep RC6 Enabled: %s\n",
yesno(rcctl1 & GEN6_RC_CTL_RC6p_ENABLE));
seq_printf(m, "Deepest RC6 Enabled: %s\n",
yesno(rcctl1 & GEN6_RC_CTL_RC6pp_ENABLE));
seq_printf(m, "Current RC state: ");
switch (gt_core_status & GEN6_RCn_MASK) {
case GEN6_RC0:
if (gt_core_status & GEN6_CORE_CPD_STATE_MASK)
seq_printf(m, "Core Power Down\n");
else
seq_printf(m, "on\n");
break;
case GEN6_RC3:
seq_printf(m, "RC3\n");
break;
case GEN6_RC6:
seq_printf(m, "RC6\n");
break;
case GEN6_RC7:
seq_printf(m, "RC7\n");
break;
default:
seq_printf(m, "Unknown\n");
break;
}
seq_printf(m, "Core Power Down: %s\n",
yesno(gt_core_status & GEN6_CORE_CPD_STATE_MASK));
return 0;
}
static int i915_drpc_info(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
if (IS_GEN6(dev) || IS_GEN7(dev))
return gen6_drpc_info(m);
else
return ironlake_drpc_info(m);
}
static int i915_fbc_status(struct seq_file *m, void *unused)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
......
......@@ -3563,6 +3563,14 @@
#define GEN6_PCODE_DATA 0x138128
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_GT_CORE_STATUS 0x138060
#define GEN6_CORE_CPD_STATE_MASK (7<<4)
#define GEN6_RCn_MASK 7
#define GEN6_RC0 0
#define GEN6_RC3 2
#define GEN6_RC6 3
#define GEN6_RC7 4
#define G4X_AUD_VID_DID 0x62020
#define INTEL_AUDIO_DEVCL 0x808629FB
#define INTEL_AUDIO_DEVBLC 0x80862801
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment