Merge commit 'v2.6.35-rc6' into devicetree/next

Conflicts:
	arch/sparc/kernel/prom_64.c

Documentation/00-INDEX

@@ -32,8 +32,6 @@ DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
-	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
@@ -84,6 +82,8 @@ blockdev/
 	- info on block devices & drivers
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
@@ -168,6 +168,8 @@ initrd.txt
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
+io-mapping.txt
+	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/

Documentation/kernel-parameters.txt

@@ -1265,7 +1265,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
-	lmb=debug	[KNL] Enable lmb debug messages.
+	memblock=debug	[KNL] Enable memblock debug messages.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/blockdev/ramdisk.txt.
@@ -2048,7 +2048,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			WARNING: Forcing ASPM on may cause system lockups.
 
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-		off	Do not use native PCIe PME signaling.
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
 		force	Use native PCIe PME signaling even if the BIOS refuses
 			to allow the kernel to control the relevant PCIe config
 			registers.

Documentation/video4linux/CARDLIST.tuner

@@ -82,3 +82,4 @@ tuner=81 - Partsnic (Daewoo) PTI-5NF05
 tuner=82 - Philips CU1216L
 tuner=83 - NXP TDA18271
 tuner=84 - Sony BTF-Pxn01Z
+tuner=85 - Philips FQ1236 MK5

Documentation/watchdog/watchdog-parameters.txt

@@ -125,6 +125,11 @@ ibmasr:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+-------------------------------------------------
 indydog:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)

MAINTAINERS

@@ -896,11 +896,13 @@ S:	Maintained
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
+M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
+F:	arch/arm/plat-s5p/
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1148,7 +1150,7 @@ F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
@@ -1160,18 +1162,18 @@ F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
-L:	kernel@avr32linux.org
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
@@ -1581,7 +1583,7 @@ F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
-L:	linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
 W:	http://linux-cifs.samba.org/
 Q:	http://patchwork.ozlabs.org/project/linux-cifs-client/list/
@@ -2109,11 +2111,20 @@ F:	drivers/edac/i5000_edac.c
 
 EDAC-I5400
 M:	Mauro Carvalho Chehab <mchehab@redhat.com>
-L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
+EDAC-I7CORE
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/i7core_edac.c
+F:	drivers/edac/edac_mce.c
+F:	include/linux/edac_mce.h
+
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
 M:	"Arvind R." <arvind@jetztechnologies.com>
@@ -2887,6 +2898,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
+INPUT MULTITOUCH (MT) PROTOCOL
+M:	Henrik Rydberg <rydberg@euromail.se>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/input/multi-touch-protocol.txt
+K:	\b(ABS|SYN)_MT_
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -2978,20 +2996,14 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2100.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2200.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
@@ -3379,7 +3391,7 @@ KPROBES
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
-M:	Masami Hiramatsu <mhiramat@redhat.com>
+M:	Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
@@ -4627,6 +4639,12 @@ M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
+QLOGIC QLA1280 SCSI DRIVER
+M:	Michael Reed <mdr@sgi.com>
+L:	linux-scsi@vger.kernel.org
+S:	Maintained
+F:	drivers/scsi/qla1280.[ch]
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5318,6 +5336,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
+F:	drivers/sbus
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 35
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
@@ -883,80 +883,10 @@ PHONY += $(vmlinux-dirs)
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
-# Build the kernel release string
-#
-# The KERNELRELEASE value built here is stored in the file
-# include/config/kernel.release, and is used when executing several
-# make targets, such as "make install" or "make modules_install."
-#
-# The eventual kernel release string consists of the following fields,
-# shown in a hierarchical format to show how smaller parts are concatenated
-# to form the larger and final value, with values coming from places like
-# the Makefile, kernel config options, make command line options and/or
-# SCM tag information.
-#
-#	$(KERNELVERSION)
-#	  $(VERSION)			eg, 2
-#	  $(PATCHLEVEL)			eg, 6
-#	  $(SUBLEVEL)			eg, 18
-#	  $(EXTRAVERSION)		eg, -rc6
-#	$(localver-full)
-#	  $(localver)
-#	    localversion*		(files without backups, containing '~')
-#	    $(CONFIG_LOCALVERSION)	(from kernel config setting)
-#	  $(LOCALVERSION)		(from make command line, if provided)
-#	  $(localver-extra)
-#	    $(scm-identifier)		(unique SCM tag, if one exists)
-#	      ./scripts/setlocalversion	(only with CONFIG_LOCALVERSION_AUTO)
-#	      .scmversion		(only with CONFIG_LOCALVERSION_AUTO)
-#	    +				(only without CONFIG_LOCALVERSION_AUTO
-#					 and without LOCALVERSION= and
-#					 repository is at non-tagged commit)
-#
-# For kernels without CONFIG_LOCALVERSION_AUTO compiled from an SCM that has
-# been revised beyond a tagged commit, `+' is appended to the version string
-# when not overridden by using "make LOCALVERSION=".  This indicates that the
-# kernel is not a vanilla release version and has been modified.
-
-pattern = ".*/localversion[^~]*"
-string  = $(shell cat /dev/null \
-	   `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
-
-localver = $(subst $(space),, $(string) \
-			      $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-# scripts/setlocalversion is called to create a unique identifier if the source
-# is managed by a known SCM and the repository has been revised since the last
-# tagged (release) commit.  The format of the identifier is determined by the
-# SCM's implementation.
-#
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
-ifeq ($(wildcard .scmversion),)
-        scm-identifier = $(shell $(CONFIG_SHELL) \
-                         $(srctree)/scripts/setlocalversion $(srctree))
-else
-        scm-identifier = $(shell cat .scmversion 2> /dev/null)
-endif
-
-ifdef CONFIG_LOCALVERSION_AUTO
-	localver-extra = $(scm-identifier)
-else
-	ifneq ($(scm-identifier),)
-		ifeq ($(LOCALVERSION),)
-			localver-extra = +
-		endif
-	endif
-endif
-
-localver-full = $(localver)$(LOCALVERSION)$(localver-extra)
-
 # Store (new) KERNELRELASE string in include/config/kernel.release
-kernelrelease = $(KERNELVERSION)$(localver-full)
 include/config/kernel.release: include/config/auto.conf FORCE
 	$(Q)rm -f $@
-	$(Q)echo $(kernelrelease) > $@
+	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
 
 
 # Things we need to do before we recursively start building the kernel

arch/alpha/include/asm/bitops.h

@@ -410,7 +410,7 @@ static inline unsigned long __arch_hweight64(unsigned long w)
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	return __arch_hweight64(w);
 }

arch/alpha/kernel/Makefile

@@ -35,7 +35,7 @@ endif
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@ obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support

arch/alpha/kernel/ns87312.c

-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}

arch/alpha/kernel/pc873xx.c

+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}

arch/alpha/kernel/pc873xx.h

+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif

arch/alpha/kernel/pci-sysfs.c

@@ -53,7 +53,6 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
 
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {

arch/alpha/kernel/sys_sio.c

@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@ noname_init_pci(void)
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init

arch/arm/Kconfig

@@ -955,7 +955,8 @@ config XSCALE_PMU
 	default y
 
 config CPU_HAS_PMU
-	depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+		   (!ARCH_OMAP3 || OMAP3_EMU)
 	default y
 	bool