Skip to content

L
linux
Commit 4e7b4997 authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller
Browse files
Options

bnx2x: Add support for 20G-KR2 

Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b884d95b
Hide whitespace changes
Inline Side-by-side
Showing with 365 additions and 34 deletions
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
View file @ 4e7b4997
......@@ -2167,6 +2167,8 @@ struct shmem2_region {
u32 reserved2; /* Offset 0x148 */
u32 reserved3; /* Offset 0x14C */
u32 reserved4; /* Offset 0x150 */
u32 link_attr_sync[PORT_MAX]; /* Offset 0x154 */
#define LINK_ATTR_SYNC_KR2_ENABLE (1<<0)
};
......
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
View file @ 4e7b4997
......@@ -121,6 +121,7 @@
#define GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI
#define GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS
#define GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI
#define GP_STATUS_20G_KR2 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2
#define LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD
#define LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD
#define LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
......@@ -1664,7 +1665,10 @@ static void bnx2x_xmac_init(struct link_params *params, u32 max_speed)
* ports of the path
*/
if ((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) &&
if (((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) ||
(CHIP_NUM(bp) == CHIP_NUM_57840_2_20) ||
(CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE)) &&
is_port4mode &&
(REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
DP(NETIF_MSG_LINK,
......@@ -1760,6 +1764,18 @@ static int bnx2x_xmac_enable(struct link_params *params,
*/
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0);
/* When XMAC is in XLGMII mode, disable sending idles for fault
* detection.
*/
if (!(params->phy[INT_PHY].flags & FLAGS_TX_ERROR_CHECK)) {
REG_WR(bp, xmac_base + XMAC_REG_RX_LSS_CTRL,
(XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE |
XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE));
REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
REG_WR(bp, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
}
/* Set Max packet size */
REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710);
......@@ -1780,6 +1796,12 @@ static int bnx2x_xmac_enable(struct link_params *params,
/* Enable TX and RX */
val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN;
/* Set MAC in XLGMII mode for dual-mode */
if ((vars->line_speed == SPEED_20000) &&
(params->phy[INT_PHY].supported &
SUPPORTED_20000baseKR2_Full))
val |= XMAC_CTRL_REG_XLGMII_ALIGN_ENB;
/* Check loopback mode */
if (lb)
val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
......@@ -2096,6 +2118,16 @@ static void bnx2x_update_mng(struct link_params *params, u32 link_status)
port_mb[params->port].link_status), link_status);
}
static void bnx2x_update_link_attr(struct link_params *params, u32 link_attr)
{
struct bnx2x *bp = params->bp;
if (SHMEM2_HAS(bp, link_attr_sync))
REG_WR(bp, params->shmem2_base +
offsetof(struct shmem2_region,
link_attr_sync[params->port]), link_attr);
}
static void bnx2x_update_pfc_nig(struct link_params *params,
struct link_vars *vars,
struct bnx2x_nig_brb_pfc_port_params *nig_params)
......@@ -3147,6 +3179,15 @@ static void bnx2x_cl45_read_or_write(struct bnx2x *bp, struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy, devad, reg, val | or_val);
}
static void bnx2x_cl45_read_and_write(struct bnx2x *bp,
struct bnx2x_phy *phy,
u8 devad, u16 reg, u16 and_val)
{
u16 val;
bnx2x_cl45_read(bp, phy, devad, reg, &val);
bnx2x_cl45_write(bp, phy, devad, reg, val & and_val);
}
int bnx2x_phy_read(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 *ret_val)
{
......@@ -3551,6 +3592,44 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
* init configuration, and set/clear SGMII flag. Internal
* phy init is done purely in phy_init stage.
*/
static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u16 i;
static struct bnx2x_reg_set reg_set[] = {
/* Step 1 - Program the TX/RX alignment markers */
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0xa157},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xcbe2},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0x7537},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0xa157},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xcbe2},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0x7537},
/* Step 2 - Configure the NP registers */
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000a},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6400},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0620},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0157},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x6464},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x3150},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x3150},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620}
};
DP(NETIF_MSG_LINK, "Enabling 20G-KR2\n");
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL49_USERB0_CTRL, (3<<6));
for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++)
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
/* Start KR2 work-around timer which handles BCM8073 link-parner */
vars->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE;
bnx2x_update_link_attr(params, vars->link_attr_sync);
}
static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
struct link_params *params)
......@@ -3564,6 +3643,21 @@ static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy,
MDIO_WC_REG_DIGITAL4_MISC5, 0xc000);
}
static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy,
struct link_params *params)
{
/* Restart autoneg on the leading lane only */
struct bnx2x *bp = params->bp;
u16 lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);
/* Restore AER */
bnx2x_set_aer_mmd(params, phy);
}
static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars) {
......@@ -3576,7 +3670,9 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
/* Disable Autoneg: re-enable it after adv is done. */
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0}
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0},
{MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n");
/* Set to default registers that may be overriden by 10G force */
......@@ -3586,7 +3682,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
cl72_ctrl &= 0xf8ff;
cl72_ctrl &= 0x08ff;
cl72_ctrl |= 0x3800;
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
......@@ -3624,6 +3720,16 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
/* Configure the next lane if dual mode */
if (phy->flags & FLAGS_WC_DUAL_MODE)
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10*(lane+1),
((0x02 <<
MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x06 <<
MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x09 <<
MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL,
0x03f0);
......@@ -3670,10 +3776,26 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL3_UP1, 0x1f);
/* Enable Autoneg */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200);
if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) ||
(phy->req_line_speed == SPEED_20000)) {
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_RX1_PCI_CTRL + (0x10*lane),
(1<<11));
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7);
bnx2x_set_aer_mmd(params, phy);
bnx2x_warpcore_enable_AN_KR2(phy, params, vars);
}
/* Enable Autoneg: only on the main lane */
bnx2x_warpcore_restart_AN_KR(phy, params);
}
static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
......@@ -3692,9 +3814,7 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
/* Leave cl72 training enable, needed for KR */
{MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
0x2}
{MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}
};
for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++)
......@@ -3858,10 +3978,57 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy,
MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, (val & 0x7FFF));
}
static void bnx2x_warpcore_set_20G_KR2(struct bnx2x *bp,
struct bnx2x_phy *phy)
static void bnx2x_warpcore_set_20G_force_KR2(struct bnx2x_phy *phy,
struct link_params *params)
{
DP(NETIF_MSG_LINK, "KR2 still not supported !!!\n");
u16 val;
struct bnx2x *bp = params->bp;
/* Set global registers, so set AER lane to 0 */
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, 0);
/* Disable sequencer */
bnx2x_cl45_read_and_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~(1<<13));
bnx2x_set_aer_mmd(params, phy);
bnx2x_cl45_read_and_write(bp, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_KR_CONTROL, ~(1<<1));
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_CTRL, 0);
/* Turn off CL73 */
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL73_USERB0_CTRL, &val);
val &= ~(1<<5);
val |= (1<<6);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL73_USERB0_CTRL, val);
/* Set 20G KR2 force speed */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x1f);
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL4_MISC3, (1<<7));
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &val);
val &= ~(3<<14);
val |= (1<<15);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, val);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0x835A);
/* Enable sequencer (over lane 0) */
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, 0);
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, (1<<13));
bnx2x_set_aer_mmd(params, phy);
}
static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp,
......@@ -4293,16 +4460,14 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
bnx2x_sfp_module_detection(phy, params);
break;
case PORT_HW_CFG_NET_SERDES_IF_KR2:
if (vars->line_speed != SPEED_20000) {
DP(NETIF_MSG_LINK, "Speed not supported yet\n");
return;
if (!params->loopback_mode) {
bnx2x_warpcore_enable_AN_KR(phy, params, vars);
} else {
DP(NETIF_MSG_LINK, "Setting KR 20G-Force\n");
bnx2x_warpcore_set_20G_force_KR2(phy, params);
}
DP(NETIF_MSG_LINK, "Setting 20G KR2\n");
bnx2x_warpcore_set_20G_KR2(bp, phy);
break;
default:
DP(NETIF_MSG_LINK,
"Unsupported Serdes Net Interface 0x%x\n",
......@@ -4413,8 +4578,9 @@ static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n",
params->loopback_mode, phy->req_line_speed);
if (phy->req_line_speed < SPEED_10000) {
/* 10/100/1000 */
if (phy->req_line_speed < SPEED_10000 ||
phy->supported & SUPPORTED_20000baseKR2_Full) {
/* 10/100/1000/20G-KR2 */
/* Update those 1-copy registers */
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
......@@ -4427,18 +4593,20 @@ static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
lane = bnx2x_get_warpcore_lane(phy, params);
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16);
val16 |= (1<<lane);
if (phy->flags & FLAGS_WC_DUAL_MODE)
val16 |= (2<<lane);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK1_LANECTRL2,
val16 | (1<<lane));
val16);
/* Switch back to 4-copy registers */
bnx2x_set_aer_mmd(params, phy);
} else {
/* 10G & 20G */
/* 10G / 20G-DXGXS */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL,
0x4000);
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1);
}
......@@ -4603,6 +4771,10 @@ void bnx2x_link_status_update(struct link_params *params,
params->feature_config_flags &=
~FEATURE_CONFIG_PFC_ENABLED;
if (SHMEM2_HAS(bp, link_attr_sync))
vars->link_attr_sync = SHMEM2_RD(bp,
link_attr_sync[params->port]);
DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n",
vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",
......@@ -5332,6 +5504,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy,
vars->link_status |= LINK_10GTFD;
break;
case GP_STATUS_20G_DXGXS:
case GP_STATUS_20G_KR2:
vars->line_speed = SPEED_20000;
vars->link_status |= LINK_20GTFD;
break;
......@@ -5439,7 +5612,15 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy,
int rc = 0;
lane = bnx2x_get_warpcore_lane(phy, params);
/* Read gp_status */
if (phy->req_line_speed > SPEED_10000) {
if ((params->loopback_mode) &&
(phy->flags & FLAGS_WC_DUAL_MODE)) {
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up);
link_up &= 0x1;
} else if ((phy->req_line_speed > SPEED_10000) &&
(phy->supported & SUPPORTED_20000baseMLD2_Full)) {
u16 temp_link_up;
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
1, &temp_link_up);
......@@ -5452,12 +5633,22 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy,
bnx2x_ext_phy_resolve_fc(phy, params, vars);
} else {
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1);
MDIO_WC_REG_GP2_STATUS_GP_2_1,
&gp_status1);
DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1);
/* Check for either KR or generic link up. */
gp_status1 = ((gp_status1 >> 8) & 0xf) |
((gp_status1 >> 12) & 0xf);
link_up = gp_status1 & (1 << lane);
/* Check for either KR, 1G, or AN up. */
link_up = ((gp_status1 >> 8) |
(gp_status1 >> 12) |
(gp_status1)) &
(1 << lane);
if (phy->supported & SUPPORTED_20000baseKR2_Full) {
u16 an_link;
bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_STATUS, &an_link);
bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_STATUS, &an_link);
link_up |= (an_link & (1<<2));
}
if (link_up && SINGLE_MEDIA_DIRECT(params)) {
u16 pd, gp_status4;
if (phy->req_line_speed == SPEED_AUTO_NEG) {
......@@ -5522,7 +5713,7 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy,
if ((lane & 1) == 0)
gp_speed <<= 8;
gp_speed &= 0x3f00;
link_up = !!link_up;
rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed,
duplex);
......@@ -11564,9 +11755,11 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
phy->media_type = ETH_PHY_KR;
phy->flags |= FLAGS_WC_DUAL_MODE;
phy->supported &= (SUPPORTED_20000baseKR2_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
phy->flags &= ~FLAGS_TX_ERROR_CHECK;
break;
default:
DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n",
......@@ -12018,13 +12211,17 @@ static void bnx2x_init_xgxs_loopback(struct link_params *params,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
struct bnx2x_phy *int_phy = &params->phy[INT_PHY];
vars->link_up = 1;
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->duplex = DUPLEX_FULL;
if (params->req_line_speed[0] == SPEED_1000)
vars->line_speed = SPEED_1000;
else if ((params->req_line_speed[0] == SPEED_20000) ||
(int_phy->flags & FLAGS_WC_DUAL_MODE))
vars->line_speed = SPEED_20000;
else
vars->line_speed = SPEED_10000;
vars->line_speed = SPEED_10000;
if (!USES_WARPCORE(bp))
bnx2x_xgxs_deassert(params);
......@@ -13139,6 +13336,108 @@ static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy,
}
}
}
static void bnx2x_disable_kr2(struct link_params *params,
struct link_vars *vars,
struct bnx2x_phy *phy)
{
struct bnx2x *bp = params->bp;
int i;
static struct bnx2x_reg_set reg_set[] = {
/* Step 1 - Program the TX/RX alignment markers */
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000}
};
DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n");
for (i = 0; i < sizeof(reg_set)/sizeof(struct bnx2x_reg_set); i++)
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE;
bnx2x_update_link_attr(params, vars->link_attr_sync);
/* Restart AN on leading lane */
bnx2x_warpcore_restart_AN_KR(phy, params);
}
static void bnx2x_kr2_recovery(struct link_params *params,
struct link_vars *vars,
struct bnx2x_phy *phy)
{
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "KR2 recovery\n");
bnx2x_warpcore_enable_AN_KR2(phy, params, vars);
bnx2x_warpcore_restart_AN_KR(phy, params);
}
static void bnx2x_check_kr2_wa(struct link_params *params,
struct link_vars *vars,
struct bnx2x_phy *phy)
{
struct bnx2x *bp = params->bp;
u16 base_page, next_page, not_kr2_device, lane;
int sigdet = bnx2x_warpcore_get_sigdet(phy, params);
if (!sigdet) {
if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
bnx2x_kr2_recovery(params, vars, phy);
return;
}
lane = bnx2x_get_warpcore_lane(phy, params);
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, lane);
bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_LP_AUTO_NEG, &base_page);
bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_LP_AUTO_NEG2, &next_page);
bnx2x_set_aer_mmd(params, phy);
/* CL73 has not begun yet */
if (base_page == 0) {
if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE))
bnx2x_kr2_recovery(params, vars, phy);
return;
}
/* In case NP bit is not set in the BasePage, or it is set,
* but only KX is advertised, declare this link partner as non-KR2
* device.
*/
not_kr2_device = (((base_page & 0x8000) == 0) ||
(((base_page & 0x8000) &&
((next_page & 0xe0) == 0x2))));
/* In case KR2 is already disabled, check if we need to re-enable it */
if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
if (!not_kr2_device) {
DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page,
next_page);
bnx2x_kr2_recovery(params, vars, phy);
}
return;
}
/* KR2 is enabled, but not KR2 device */
if (not_kr2_device) {
/* Disable KR2 on both lanes */
DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page);
bnx2x_disable_kr2(params, vars, phy);
return;
}
}
void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
{
u16 phy_idx;
......@@ -13156,6 +13455,9 @@ void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
if (CHIP_IS_E3(bp)) {
struct bnx2x_phy *phy = &params->phy[INT_PHY];
bnx2x_set_aer_mmd(params, phy);
if ((phy->supported & SUPPORTED_20000baseKR2_Full) &&
(phy->speed_cap_mask & SPEED_20000))
bnx2x_check_kr2_wa(params, vars, phy);
bnx2x_check_over_curr(params, vars);
if (vars->rx_tx_asic_rst)
bnx2x_warpcore_config_runtime(phy, params, vars);
......
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
View file @ 4e7b4997
......@@ -347,6 +347,8 @@ struct link_vars {
u8 rx_tx_asic_rst;
u8 turn_to_run_wc_rt;
u16 rsrv2;
/* The same definitions as the shmem2 parameter */
u32 link_attr_sync;
};
/***********************************************************/
......
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
View file @ 4e7b4997
......@@ -5498,6 +5498,7 @@
#define XMAC_CTRL_REG_RX_EN (0x1<<1)
#define XMAC_CTRL_REG_SOFT_RESET (0x1<<6)
#define XMAC_CTRL_REG_TX_EN (0x1<<0)
#define XMAC_CTRL_REG_XLGMII_ALIGN_ENB (0x1<<7)
#define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18)
#define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17)
#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1)
......@@ -5518,11 +5519,14 @@
#define XMAC_REG_PAUSE_CTRL 0x68
#define XMAC_REG_PFC_CTRL 0x70
#define XMAC_REG_PFC_CTRL_HI 0x74
#define XMAC_REG_RX_LSS_CTRL 0x50
#define XMAC_REG_RX_LSS_STATUS 0x58
/* [RW 14] Maximum packet size in receive direction; exclusive of preamble &
* CRC in strip mode */
#define XMAC_REG_RX_MAX_SIZE 0x40
#define XMAC_REG_TX_CTRL 0x20
#define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE (0x1<<0)
#define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE (0x1<<1)
/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
header pointer. */
......@@ -6688,6 +6692,7 @@
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900
#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
......@@ -7062,7 +7067,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000
#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000
#define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96
#define MDIO_WC_REG_PCS_STATUS2 0x0021
#define MDIO_WC_REG_PMD_KR_CONTROL 0x0096
#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000
#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e
#define MDIO_WC_REG_XGXSBLK1_DESKEW 0x8010
......@@ -7094,6 +7100,7 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130
#define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131
#define MDIO_WC_REG_XGXS_X2_CONTROL2 0x8141
#define MDIO_WC_REG_XGXS_X2_CONTROL3 0x8142
#define MDIO_WC_REG_XGXS_RX_LN_SWAP1 0x816B
#define MDIO_WC_REG_XGXS_TX_LN_SWAP1 0x8169
#define MDIO_WC_REG_GP2_STATUS_GP_2_0 0x81d0
......@@ -7128,6 +7135,7 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a
#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00
#define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000
#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP 0x82e2
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3
#define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6
#define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL 0x82e7
......@@ -7145,9 +7153,16 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_DIGITAL4_MISC5 0x833e
#define MDIO_WC_REG_DIGITAL5_MISC6 0x8345
#define MDIO_WC_REG_DIGITAL5_MISC7 0x8349
#define MDIO_WC_REG_DIGITAL5_LINK_STATUS 0x834d
#define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED 0x834e
#define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL 0x8350
#define MDIO_WC_REG_CL49_USERB0_CTRL 0x8368
#define MDIO_WC_REG_CL73_USERB0_CTRL 0x8370
#define MDIO_WC_REG_CL73_USERB0_USTAT 0x8371
#define MDIO_WC_REG_CL73_BAM_CTRL1 0x8372
#define MDIO_WC_REG_CL73_BAM_CTRL2 0x8373
#define MDIO_WC_REG_CL73_BAM_CTRL3 0x8374
#define MDIO_WC_REG_CL73_BAM_CODE_FIELD 0x837b
#define MDIO_WC_REG_EEE_COMBO_CONTROL0 0x8390
#define MDIO_WC_REG_TX66_CONTROL 0x83b0
#define MDIO_WC_REG_RX66_CONTROL 0x83c0
......@@ -7161,7 +7176,17 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_WC_REG_RX66_SCW3_MASK 0x83c9
#define MDIO_WC_REG_FX100_CTRL1 0x8400
#define MDIO_WC_REG_FX100_CTRL3 0x8402
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL5 0x8436
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL6 0x8437
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL7 0x8438
#define MDIO_WC_REG_CL82_USERB1_TX_CTRL9 0x8439
#define MDIO_WC_REG_CL82_USERB1_RX_CTRL10 0x843a
#define MDIO_WC_REG_CL82_USERB1_RX_CTRL11 0x843b
#define MDIO_WC_REG_ETA_CL73_OUI1 0x8453
#define MDIO_WC_REG_ETA_CL73_OUI2 0x8454
#define MDIO_WC_REG_ETA_CL73_OUI3 0x8455
#define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE 0x8456
#define MDIO_WC_REG_ETA_CL73_LD_UD_CODE 0x8457
#define MDIO_WC_REG_MICROBLK_CMD 0xffc2
#define MDIO_WC_REG_MICROBLK_DL_STATUS 0xffc5
#define MDIO_WC_REG_MICROBLK_CMD3 0xffcc
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7