Merge branches 'clk-cleanup', 'clk-aspeed', 'clk-dt', 'clk-renesas' and...

Merge branches 'clk-cleanup', 'clk-aspeed', 'clk-dt', 'clk-renesas' and 'clk-skyworks' into clk-next - Support for i3c clks on Aspeed ast2600 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators * clk-cleanup: clk: microchip: fix potential UAF in auxdev release callback clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: stm32h7: Remove an unused field in struct stm32_fractional_divider clk: tegra20: fix gcc-7 constant overflow warning clock: milbeaut: use devm_platform_get_and_ioremap_resource() clk: Print an info line before disabling unused clocks clk: ti: Use of_address_to_resource() clk: remove unnecessary (void*) conversions clk: at91: clk-sam9x60-pll: fix return value check clk: visconti: remove unused visconti_pll_provider::regmap * clk-aspeed: dt-bindings: clock: ast2600: Expand comment on reset definitions clk: ast2600: Add comment about combined clock + reset handling dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions clk: ast2600: Add full configs for I3C clocks dt-bindings: clock: ast2600: Add top-level I3C clock clk: ast2600: allow empty entries in aspeed_g6_gates * clk-dt: clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt() clk: Use of_property_present() for testing DT property presence * clk-renesas: clk: renesas: r8a77980: Add I2C5 clock clk: rs9: Add support for 9FGV0441 clk: rs9: Support device specific dif bit calculation dt-bindings: clk: rs9: Add 9FGV0441 clk: rs9: Check for vendor/device ID clk: renesas: Convert to platform remove callback returning void clk: renesas: r9a06g032: Improve clock tables clk: renesas: r9a06g032: Document structs clk: renesas: r9a06g032: Drop unused fields clk: renesas: r9a06g032: Improve readability clk: renesas: r8a77980: Add Z2 clock clk: renesas: r8a77970: Add Z2 clock clk: renesas: r8a77995: Fix VIN parent clock clk: renesas: r8a77980: Add VIN clocks clk: renesas: r8a779g0: Add VIN clocks clk: renesas: r8a779g0: Add ISPCS clocks clk: renesas: r8a779g0: Add CSI-2 clocks clk: renesas: r8a779g0: Add thermal clock clk: renesas: r8a779g0: Add Audio clocks clk: renesas: cpg-mssr: Update MSSR register range for R-Car V4H * clk-skyworks: clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators dt-bindings: clk: si521xx: Add Skyworks Si521xx I2C PCIe clock generators

Merge branches 'clk-cleanup', 'clk-aspeed', 'clk-dt', 'clk-renesas' and...
Merge branches 'clk-cleanup', 'clk-aspeed', 'clk-dt', 'clk-renesas' and 'clk-skyworks' into clk-next - Support for i3c clks on Aspeed ast2600 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators * clk-cleanup: clk: microchip: fix potential UAF in auxdev release callback clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: stm32h7: Remove an unused field in struct stm32_fractional_divider clk: tegra20: fix gcc-7 constant overflow warning clock: milbeaut: use devm_platform_get_and_ioremap_resource() clk: Print an info line before disabling unused clocks clk: ti: Use of_address_to_resource() clk: remove unnecessary (void*) conversions clk: at91: clk-sam9x60-pll: fix return value check clk: visconti: remove unused visconti_pll_provider::regmap * clk-aspeed: dt-bindings: clock: ast2600: Expand comment on reset definitions clk: ast2600: Add comment about combined clock + reset handling dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions clk: ast2600: Add full configs for I3C clocks dt-bindings: clock: ast2600: Add top-level I3C clock clk: ast2600: allow empty entries in aspeed_g6_gates * clk-dt: clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt() clk: Use of_property_present() for testing DT property presence * clk-renesas: clk: renesas: r8a77980: Add I2C5 clock clk: rs9: Add support for 9FGV0441 clk: rs9: Support device specific dif bit calculation dt-bindings: clk: rs9: Add 9FGV0441 clk: rs9: Check for vendor/device ID clk: renesas: Convert to platform remove callback returning void clk: renesas: r9a06g032: Improve clock tables clk: renesas: r9a06g032: Document structs clk: renesas: r9a06g032: Drop unused fields clk: renesas: r9a06g032: Improve readability clk: renesas: r8a77980: Add Z2 clock clk: renesas: r8a77970: Add Z2 clock clk: renesas: r8a77995: Fix VIN parent clock clk: renesas: r8a77980: Add VIN clocks clk: renesas: r8a779g0: Add VIN clocks clk: renesas: r8a779g0: Add ISPCS clocks clk: renesas: r8a779g0: Add CSI-2 clocks clk: renesas: r8a779g0: Add thermal clock clk: renesas: r8a779g0: Add Audio clocks clk: renesas: cpg-mssr: Update MSSR register range for R-Car V4H * clk-skyworks: clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators dt-bindings: clk: si521xx: Add Skyworks Si521xx I2C PCIe clock generators
4ec6a2f9 · Stephen Boyd · eeac8ede · 7455b700 · ced8a02b · f1d97a37
Commit 4ec6a2f9 authored Apr 25, 2023 by Stephen Boyd
26 changed files
--- a/Documentation/devicetree/bindings/clock/renesas,9series.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -16,6 +16,11 @@ description: |
  - 9FGV0241:
    0 -- DIF0
    1 -- DIF1
+  - 9FGV0441:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3

 maintainers:
  - Marek Vasut <marex@denx.de>
@@ -24,6 +29,7 @@ properties:
  compatible:
    enum:
      - renesas,9fgv0241
+      - renesas,9fgv0441

  reg:
    description: I2C device address

--- a/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
+++ b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/skyworks,si521xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Si521xx I2C PCIe clock generators
+
+description: |
+  The Skyworks Si521xx are I2C PCIe clock generators providing
+  from 4 to 9 output clocks.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - skyworks,si52144
+      - skyworks,si52146
+      - skyworks,si52147
+
+  reg:
+    const: 0x6b
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  skyworks,out-amplitude-microvolt:
+    enum: [ 300000, 400000, 500000, 600000, 700000, 800000, 900000, 1000000 ]
+    description: Output clock signal amplitude
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@6b {
+            compatible = "skyworks,si52144";
+            reg = <0x6b>;
+            #clock-cells = <1>;
+            clocks = <&ref25m>;
+        };
+    };
+
+...
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -367,6 +367,15 @@ config COMMON_CLK_RS9_PCIE
 	  This driver supports the Renesas 9-series PCIe clock generator
 	  models 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ.

+config COMMON_CLK_SI521XX
+	tristate "Clock driver for SkyWorks Si521xx PCIe clock generators"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	  This driver supports the SkyWorks Si521xx PCIe clock generator
+	  models Si52144/Si52146/Si52147.
+
 config COMMON_CLK_VC5
 	tristate "Clock driver for IDT VersaClock 5,6 devices"
 	depends on I2C

--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_COMMON_CLK_TPS68470)      += clk-tps68470.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
 obj-$(CONFIG_COMMON_CLK_RS9_PCIE)	+= clk-renesas-pcie.o
+obj-$(CONFIG_COMMON_CLK_SI521XX)	+= clk-si521xx.o
 obj-$(CONFIG_COMMON_CLK_VC5)		+= clk-versaclock5.o
 obj-$(CONFIG_COMMON_CLK_VC7)		+= clk-versaclock7.o
 obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o

--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -668,7 +668,7 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,

 		ret = sam9x60_frac_pll_compute_mul_frac(&frac->core, FCORE_MIN,
 							parent_rate, true);
-		if (ret <= 0) {
+		if (ret < 0) {
 			hw = ERR_PTR(ret);
 			goto free;
 		}

--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -15,7 +15,11 @@

 #include "clk-aspeed.h"

-#define ASPEED_G6_NUM_CLKS		71
+/*
+ * This includes the gates (configured from aspeed_g6_gates), plus the
+ * explicitly-configured clocks (ASPEED_CLK_HPLL and up).
+ */
+#define ASPEED_G6_NUM_CLKS		72

 #define ASPEED_G6_SILICON_REV		0x014
 #define CHIP_REVISION_ID			GENMASK(23, 16)
@@ -32,6 +36,20 @@
 #define ASPEED_G6_CLK_SELECTION1	0x300
 #define ASPEED_G6_CLK_SELECTION2	0x304
 #define ASPEED_G6_CLK_SELECTION4	0x310
+#define ASPEED_G6_CLK_SELECTION5	0x314
+#define   I3C_CLK_SELECTION_SHIFT	31
+#define   I3C_CLK_SELECTION		BIT(31)
+#define     I3C_CLK_SELECT_HCLK		(0 << I3C_CLK_SELECTION_SHIFT)
+#define     I3C_CLK_SELECT_APLL_DIV	(1 << I3C_CLK_SELECTION_SHIFT)
+#define   APLL_DIV_SELECTION_SHIFT	28
+#define   APLL_DIV_SELECTION		GENMASK(30, 28)
+#define     APLL_DIV_2			(0b001 << APLL_DIV_SELECTION_SHIFT)
+#define     APLL_DIV_3			(0b010 << APLL_DIV_SELECTION_SHIFT)
+#define     APLL_DIV_4			(0b011 << APLL_DIV_SELECTION_SHIFT)
+#define     APLL_DIV_5			(0b100 << APLL_DIV_SELECTION_SHIFT)
+#define     APLL_DIV_6			(0b101 << APLL_DIV_SELECTION_SHIFT)
+#define     APLL_DIV_7			(0b110 << APLL_DIV_SELECTION_SHIFT)
+#define     APLL_DIV_8			(0b111 << APLL_DIV_SELECTION_SHIFT)

 #define ASPEED_HPLL_PARAM		0x200
 #define ASPEED_APLL_PARAM		0x210
@@ -55,6 +73,27 @@ static void __iomem *scu_g6_base;
 static u8 soc_rev;

 /*
+ * The majority of the clocks in the system are gates paired with a reset
+ * controller that holds the IP in reset; this is represented by the @reset_idx
+ * member of entries here.
+ *
+ * This borrows from clk_hw_register_gate, but registers two 'gates', one
+ * to control the clock enable register and the other to control the reset
+ * IP. This allows us to enforce the ordering:
+ *
+ * 1. Place IP in reset
+ * 2. Enable clock
+ * 3. Delay
+ * 4. Release reset
+ *
+ * Consequently, if reset_idx is set, reset control is implicit: the clock
+ * consumer does not need its own reset handling, as enabling the clock will
+ * also deassert reset.
+ *
+ * There are some gates that do not have an associated reset; these are
+ * handled by using -1 as the index for the reset, and the consumer must
+ * explictly assert/deassert reset lines as required.
+ *
 * Clocks marked with CLK_IS_CRITICAL:
 *
 *  ref0 and ref1 are essential for the SoC to operate
@@ -97,14 +136,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = {
 	[ASPEED_CLK_GATE_LHCCLK]	= { 37, -1, "lhclk-gate",	"lhclk", 0 },	/* LPC master/LPC+ */
 	/* Reserved 38 RSA: no longer used */
 	/* Reserved 39 */
-	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	NULL,	 0 },	/* I3C0 */
-	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	NULL,	 0 },	/* I3C1 */
-	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	NULL,	 0 },	/* I3C2 */
-	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	NULL,	 0 },	/* I3C3 */
-	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	NULL,	 0 },	/* I3C4 */
-	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	NULL,	 0 },	/* I3C5 */
-	[ASPEED_CLK_GATE_I3C6CLK]	= { 46,  46, "i3c6clk-gate",	NULL,	 0 },	/* I3C6 */
-	[ASPEED_CLK_GATE_I3C7CLK]	= { 47,  47, "i3c7clk-gate",	NULL,	 0 },	/* I3C7 */
+	[ASPEED_CLK_GATE_I3C0CLK]	= { 40,  40, "i3c0clk-gate",	"i3cclk", 0 }, /* I3C0 */
+	[ASPEED_CLK_GATE_I3C1CLK]	= { 41,  41, "i3c1clk-gate",	"i3cclk", 0 }, /* I3C1 */
+	[ASPEED_CLK_GATE_I3C2CLK]	= { 42,  42, "i3c2clk-gate",	"i3cclk", 0 }, /* I3C2 */
+	[ASPEED_CLK_GATE_I3C3CLK]	= { 43,  43, "i3c3clk-gate",	"i3cclk", 0 }, /* I3C3 */
+	[ASPEED_CLK_GATE_I3C4CLK]	= { 44,  44, "i3c4clk-gate",	"i3cclk", 0 }, /* I3C4 */
+	[ASPEED_CLK_GATE_I3C5CLK]	= { 45,  45, "i3c5clk-gate",	"i3cclk", 0 }, /* I3C5 */
+	/* Reserved: 46 & 47 */
 	[ASPEED_CLK_GATE_UART1CLK]	= { 48,  -1, "uart1clk-gate",	"uart",	 0 },	/* UART1 */
 	[ASPEED_CLK_GATE_UART2CLK]	= { 49,  -1, "uart2clk-gate",	"uart",	 0 },	/* UART2 */
 	[ASPEED_CLK_GATE_UART3CLK]	= { 50,  -1, "uart3clk-gate",	"uart",  0 },	/* UART3 */
@@ -652,6 +690,9 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 		const struct aspeed_gate_data *gd = &aspeed_g6_gates[i];
 		u32 gate_flags;

+		if (!gd->name)
+			continue;
+
 		/*
 		 * Special case: the USB port 1 clock (bit 14) is always
 		 * working the opposite way from the other ones.
@@ -772,6 +813,14 @@ static void __init aspeed_g6_cc(struct regmap *map)
 	/* USB 2.0 port1 phy 40MHz clock */
 	hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
 	aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+
+	/* i3c clock: source from apll, divide by 8 */
+	regmap_update_bits(map, ASPEED_G6_CLK_SELECTION5,
+			   I3C_CLK_SELECTION | APLL_DIV_SELECTION,
+			   I3C_CLK_SELECT_APLL_DIV | APLL_DIV_8);
+
+	hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
+	aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;
 };

 static void __init aspeed_g6_cc_init(struct device_node *np)

--- a/drivers/clk/clk-milbeaut.c
+++ b/drivers/clk/clk-milbeaut.c
@@ -560,14 +560,12 @@ static void m10v_reg_mux_pre(const struct m10v_clk_mux_factors *factors,
 static int m10v_clk_probe(struct platform_device *pdev)
 {
 	int id;
-	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	void __iomem *base;
 	const char *parent_name;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(base))
 		return PTR_ERR(base);


--- a/drivers/clk/clk-renesas-pcie.c
+++ b/drivers/clk/clk-renesas-pcie.c
@@ -6,6 +6,7 @@
 *   - 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ
 * Currently supported:
 *   - 9FGV0241
+ *   - 9FGV0441
 *
 * Copyright (C) 2022 Marek Vasut <marex@denx.de>
 */
@@ -18,7 +19,6 @@
 #include <linux/regmap.h>

 #define RS9_REG_OE				0x0
-#define RS9_REG_OE_DIF_OE(n)			BIT((n) + 1)
 #define RS9_REG_SS				0x1
 #define RS9_REG_SS_AMP_0V6			0x0
 #define RS9_REG_SS_AMP_0V7			0x1
@@ -31,9 +31,6 @@
 #define RS9_REG_SS_SSC_MASK			(3 << 3)
 #define RS9_REG_SS_SSC_LOCK			BIT(5)
 #define RS9_REG_SR				0x2
-#define RS9_REG_SR_2V0_DIF(n)			0
-#define RS9_REG_SR_3V0_DIF(n)			BIT((n) + 1)
-#define RS9_REG_SR_DIF_MASK(n)		BIT((n) + 1)
 #define RS9_REG_REF				0x3
 #define RS9_REG_REF_OE				BIT(4)
 #define RS9_REG_REF_OD				BIT(5)
@@ -45,22 +42,31 @@
 #define RS9_REG_DID				0x6
 #define RS9_REG_BCP				0x7

+#define RS9_REG_VID_IDT				0x01
+
+#define RS9_REG_DID_TYPE_FGV			(0x0 << RS9_REG_DID_TYPE_SHIFT)
+#define RS9_REG_DID_TYPE_DBV			(0x1 << RS9_REG_DID_TYPE_SHIFT)
+#define RS9_REG_DID_TYPE_DMV			(0x2 << RS9_REG_DID_TYPE_SHIFT)
+#define RS9_REG_DID_TYPE_SHIFT			0x6
+
 /* Supported Renesas 9-series models. */
 enum rs9_model {
 	RENESAS_9FGV0241,
+	RENESAS_9FGV0441,
 };

 /* Structure to describe features of a particular 9-series model */
 struct rs9_chip_info {
 	const enum rs9_model	model;
 	unsigned int		num_clks;
+	u8			did;
 };

 struct rs9_driver_data {
 	struct i2c_client	*client;
 	struct regmap		*regmap;
 	const struct rs9_chip_info *chip_info;
-	struct clk_hw		*clk_dif[2];
+	struct clk_hw		*clk_dif[4];
 	u8			pll_amplitude;
 	u8			pll_ssc;
 	u8			clk_dif_sr;
@@ -151,17 +157,29 @@ static const struct regmap_config rs9_regmap_config = {
 	.reg_read = rs9_regmap_i2c_read,
 };

+static u8 rs9_calc_dif(const struct rs9_driver_data *rs9, int idx)
+{
+	enum rs9_model model = rs9->chip_info->model;
+
+	if (model == RENESAS_9FGV0241)
+		return BIT(idx) + 1;
+	else if (model == RENESAS_9FGV0441)
+		return BIT(idx);
+
+	return 0;
+}
+
 static int rs9_get_output_config(struct rs9_driver_data *rs9, int idx)
 {
 	struct i2c_client *client = rs9->client;
+	u8 dif = rs9_calc_dif(rs9, idx);
 	unsigned char name[5] = "DIF0";
 	struct device_node *np;
 	int ret;
 	u32 sr;

 	/* Set defaults */
-	rs9->clk_dif_sr &= ~RS9_REG_SR_DIF_MASK(idx);
-	rs9->clk_dif_sr |= RS9_REG_SR_3V0_DIF(idx);
+	rs9->clk_dif_sr |= dif;

 	snprintf(name, 5, "DIF%d", idx);
 	np = of_get_child_by_name(client->dev.of_node, name);
@@ -173,11 +191,9 @@ static int rs9_get_output_config(struct rs9_driver_data *rs9, int idx)
 	of_node_put(np);
 	if (!ret) {
 		if (sr == 2000000) {		/* 2V/ns */
-			rs9->clk_dif_sr &= ~RS9_REG_SR_DIF_MASK(idx);
-			rs9->clk_dif_sr |= RS9_REG_SR_2V0_DIF(idx);
+			rs9->clk_dif_sr &= ~dif;
 		} else if (sr == 3000000) {	/* 3V/ns (default) */
-			rs9->clk_dif_sr &= ~RS9_REG_SR_DIF_MASK(idx);
-			rs9->clk_dif_sr |= RS9_REG_SR_3V0_DIF(idx);
+			rs9->clk_dif_sr |= dif;
 		} else
 			ret = dev_err_probe(&client->dev, -EINVAL,
 					    "Invalid renesas,slew-rate value\n");
@@ -248,11 +264,13 @@ static void rs9_update_config(struct rs9_driver_data *rs9)
 	}

 	for (i = 0; i < rs9->chip_info->num_clks; i++) {
-		if (rs9->clk_dif_sr & RS9_REG_SR_3V0_DIF(i))
+		u8 dif = rs9_calc_dif(rs9, i);
+
+		if (rs9->clk_dif_sr & dif)
 			continue;

-		regmap_update_bits(rs9->regmap, RS9_REG_SR, RS9_REG_SR_3V0_DIF(i),
-				   rs9->clk_dif_sr & RS9_REG_SR_3V0_DIF(i));
+		regmap_update_bits(rs9->regmap, RS9_REG_SR, dif,
+				   rs9->clk_dif_sr & dif);
 	}
 }

@@ -269,6 +287,7 @@ static int rs9_probe(struct i2c_client *client)
 {
 	unsigned char name[5] = "DIF0";
 	struct rs9_driver_data *rs9;
+	unsigned int vid, did;
 	struct clk_hw *hw;
 	int i, ret;

@@ -305,6 +324,20 @@ static int rs9_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;

+	ret = regmap_read(rs9->regmap, RS9_REG_VID, &vid);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(rs9->regmap, RS9_REG_DID, &did);
+	if (ret < 0)
+		return ret;
+
+	if (vid != RS9_REG_VID_IDT || did != rs9->chip_info->did)
+		return dev_err_probe(&client->dev, -ENODEV,
+				     "Incorrect VID/DID: %#02x, %#02x. Expected %#02x, %#02x\n",
+				     vid, did, RS9_REG_VID_IDT,
+				     rs9->chip_info->did);
+
 	/* Register clock */
 	for (i = 0; i < rs9->chip_info->num_clks; i++) {
 		snprintf(name, 5, "DIF%d", i);
@@ -348,16 +381,25 @@ static int __maybe_unused rs9_resume(struct device *dev)
 static const struct rs9_chip_info renesas_9fgv0241_info = {
 	.model		= RENESAS_9FGV0241,
 	.num_clks	= 2,
+	.did		= RS9_REG_DID_TYPE_FGV | 0x02,
+};
+
+static const struct rs9_chip_info renesas_9fgv0441_info = {
+	.model		= RENESAS_9FGV0441,
+	.num_clks	= 4,
+	.did		= RS9_REG_DID_TYPE_FGV | 0x04,
 };

 static const struct i2c_device_id rs9_id[] = {
 	{ "9fgv0241", .driver_data = RENESAS_9FGV0241 },
+	{ "9fgv0441", .driver_data = RENESAS_9FGV0441 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rs9_id);

 static const struct of_device_id clk_rs9_of_match[] = {
 	{ .compatible = "renesas,9fgv0241", .data = &renesas_9fgv0241_info },
+	{ .compatible = "renesas,9fgv0441", .data = &renesas_9fgv0441_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, clk_rs9_of_match);

--- a/drivers/clk/clk-si521xx.c
+++ b/drivers/clk/clk-si521xx.c
--- a/drivers/clk/clk-stm32h7.c
+++ b/drivers/clk/clk-stm32h7.c
@@ -667,7 +667,6 @@ struct stm32_fractional_divider {
 	void __iomem	*mreg;
 	u8		mshift;
 	u8		mwidth;
-	u32		mmask;

 	void __iomem	*nreg;
 	u8		nshift;

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1406,6 +1406,8 @@ static int __init clk_disable_unused(void)
 		return 0;
 	}

+	pr_info("clk: Disabling unused clocks\n");
+
 	clk_prepare_lock();

 	hlist_for_each_entry(core, &clk_root_list, child_node)
@@ -3194,7 +3196,7 @@ static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
 static int clk_summary_show(struct seq_file *s, void *data)
 {
 	struct clk_core *c;
-	struct hlist_head **lists = (struct hlist_head **)s->private;
+	struct hlist_head **lists = s->private;

 	seq_puts(s, "                                 enable  prepare  protect                                duty  hardware\n");
 	seq_puts(s, "   clock                          count    count    count        rate   accuracy phase  cycle    enable\n");
@@ -3253,7 +3255,7 @@ static int clk_dump_show(struct seq_file *s, void *data)
 {
 	struct clk_core *c;
 	bool first_node = true;
-	struct hlist_head **lists = (struct hlist_head **)s->private;
+	struct hlist_head **lists = s->private;

 	seq_putc(s, '{');
 	clk_prepare_lock();
@@ -4880,8 +4882,8 @@ static struct device_node *get_clk_provider_node(struct device *dev)
 	np = dev->of_node;
 	parent_np = dev->parent ? dev->parent->of_node : NULL;

-	if (!of_find_property(np, "#clock-cells", NULL))
-		if (of_find_property(parent_np, "#clock-cells", NULL))
+	if (!of_property_present(np, "#clock-cells"))
+		if (of_property_present(parent_np, "#clock-cells"))
 			np = parent_np;

 	return np;

--- a/drivers/clk/mediatek/clk-pllfh.c
+++ b/drivers/clk/mediatek/clk-pllfh.c
@@ -75,13 +75,13 @@ void fhctl_parse_dt(const u8 *compatible_node, struct mtk_pllfh_data *pllfhs,
 	base = of_iomap(node, 0);
 	if (!base) {
 		pr_err("%s(): ioremap failed\n", __func__);
-		return;
+		goto out_node_put;
 	}

 	num_clocks = of_clk_get_parent_count(node);
 	if (!num_clocks) {
 		pr_err("%s(): failed to get clocks property\n", __func__);
-		return;
+		goto err;
 	}

 	for (i = 0; i < num_clocks; i++) {
@@ -102,6 +102,13 @@ void fhctl_parse_dt(const u8 *compatible_node, struct mtk_pllfh_data *pllfhs,
 		pllfh->state.ssc_rate = ssc_rate;
 		pllfh->state.base = base;
 	}
+
+out_node_put:
+	of_node_put(node);
+	return;
+err:
+	iounmap(base);
+	goto out_node_put;
 }

 static void pllfh_init(struct mtk_fh *fh, struct mtk_pllfh_data *pllfh_data)

--- a/drivers/clk/microchip/clk-mpfs.c
+++ b/drivers/clk/microchip/clk-mpfs.c
@@ -374,14 +374,13 @@ static void mpfs_reset_unregister_adev(void *_adev)
 	struct auxiliary_device *adev = _adev;

 	auxiliary_device_delete(adev);
+	auxiliary_device_uninit(adev);
 }

 static void mpfs_reset_adev_release(struct device *dev)
 {
 	struct auxiliary_device *adev = to_auxiliary_dev(dev);

-	auxiliary_device_uninit(adev);
-
 	kfree(adev);
 }


--- a/drivers/clk/renesas/r8a77970-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77970-cpg-mssr.c
@@ -76,6 +76,7 @@ static const struct cpg_core_clk r8a77970_core_clks[] __initconst = {
 	DEF_FIXED(".pll1_div4",	CLK_PLL1_DIV4,	CLK_PLL1_DIV2,	2, 1),

 	/* Core Clock Outputs */
+	DEF_FIXED("z2",		R8A77970_CLK_Z2,    CLK_PLL1_DIV4,  1, 1),
 	DEF_FIXED("ztr",	R8A77970_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",	R8A77970_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",		R8A77970_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),

--- a/drivers/clk/renesas/r8a77980-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77980-cpg-mssr.c
@@ -72,6 +72,7 @@ static const struct cpg_core_clk r8a77980_core_clks[] __initconst = {
 	DEF_RATE(".oco",	CLK_OCO,           32768),

 	/* Core Clock Outputs */
+	DEF_FIXED("z2",		R8A77980_CLK_Z2,    CLK_PLL2,       4, 1),
 	DEF_FIXED("ztr",	R8A77980_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED("ztrd2",	R8A77980_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
 	DEF_FIXED("zt",		R8A77980_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
@@ -150,11 +151,27 @@ static const struct mssr_mod_clk r8a77980_mod_clks[] __initconst = {
 	DEF_MOD("imp-ocv3",		 529,	R8A77980_CLK_S1D1),
 	DEF_MOD("imp-ocv2",		 531,	R8A77980_CLK_S1D1),
 	DEF_MOD("fcpvd0",		 603,	R8A77980_CLK_S3D1),
+	DEF_MOD("vin15",		 604,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin14",		 605,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin13",		 608,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin12",		 612,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin11",		 618,	R8A77980_CLK_S2D1),
 	DEF_MOD("vspd0",		 623,	R8A77980_CLK_S3D1),
+	DEF_MOD("vin10",		 625,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin9",			 627,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin8",			 628,	R8A77980_CLK_S2D1),
 	DEF_MOD("csi41",		 715,	R8A77980_CLK_CSI0),
 	DEF_MOD("csi40",		 716,	R8A77980_CLK_CSI0),
 	DEF_MOD("du0",			 724,	R8A77980_CLK_S2D1),
 	DEF_MOD("lvds",			 727,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin7",			 804,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin6",			 805,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin5",			 806,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin4",			 807,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin3",			 808,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin2",			 809,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin1",			 810,	R8A77980_CLK_S2D1),
+	DEF_MOD("vin0",			 811,	R8A77980_CLK_S2D1),
 	DEF_MOD("etheravb",		 812,	R8A77980_CLK_S3D2),
 	DEF_MOD("gether",		 813,	R8A77980_CLK_S3D2),
 	DEF_MOD("imp3",			 824,	R8A77980_CLK_S1D1),
@@ -173,6 +190,7 @@ static const struct mssr_mod_clk r8a77980_mod_clks[] __initconst = {
 	DEF_MOD("gpio0",		 912,	R8A77980_CLK_CP),
 	DEF_MOD("can-fd",		 914,	R8A77980_CLK_S3D2),
 	DEF_MOD("rpc-if",		 917,	R8A77980_CLK_RPCD2),
+	DEF_MOD("i2c5",			 919,	R8A77980_CLK_S0D6),
 	DEF_MOD("i2c4",			 927,	R8A77980_CLK_S0D6),
 	DEF_MOD("i2c3",			 928,	R8A77980_CLK_S0D6),
 	DEF_MOD("i2c2",			 929,	R8A77980_CLK_S3D2),

--- a/drivers/clk/renesas/r8a77995-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c
@@ -167,7 +167,7 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
 	DEF_MOD("du0",			 724,	R8A77995_CLK_S1D1),
 	DEF_MOD("lvds",			 727,	R8A77995_CLK_S2D1),
 	DEF_MOD("mlp",			 802,	R8A77995_CLK_S2D1),
-	DEF_MOD("vin4",			 807,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin4",			 807,	R8A77995_CLK_S3D1),
 	DEF_MOD("etheravb",		 812,	R8A77995_CLK_S3D2),
 	DEF_MOD("imr0",			 823,	R8A77995_CLK_S1D2),
 	DEF_MOD("gpio6",		 906,	R8A77995_CLK_S3D4),

--- a/drivers/clk/renesas/r8a779g0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a779g0-cpg-mssr.c
@@ -146,6 +146,7 @@ static const struct cpg_core_clk r8a779g0_core_clks[] __initconst = {
 	DEF_FIXED("vcbus",	R8A779G0_CLK_VCBUS,	CLK_VC,		1, 1),
 	DEF_FIXED("vcbusd2",	R8A779G0_CLK_VCBUSD2,	CLK_VC,		2, 1),
 	DEF_DIV6P1("canfd",     R8A779G0_CLK_CANFD,	CLK_PLL5_DIV4,	0x878),
+	DEF_DIV6P1("csi",	R8A779G0_CLK_CSI,	CLK_PLL5_DIV4,	0x880),
 	DEF_FIXED("dsiref",	R8A779G0_CLK_DSIREF,	CLK_PLL5_DIV4,	48, 1),
 	DEF_DIV6P1("dsiext",	R8A779G0_CLK_DSIEXT,	CLK_PLL5_DIV4,	0x884),

@@ -165,6 +166,8 @@ static const struct mssr_mod_clk r8a779g0_mod_clks[] __initconst = {
 	DEF_MOD("avb1",		212,	R8A779G0_CLK_S0D4_HSC),
 	DEF_MOD("avb2",		213,	R8A779G0_CLK_S0D4_HSC),
 	DEF_MOD("canfd0",	328,	R8A779G0_CLK_SASYNCPERD2),
+	DEF_MOD("csi40",	331,	R8A779G0_CLK_CSI),
+	DEF_MOD("csi41",	400,	R8A779G0_CLK_CSI),
 	DEF_MOD("dis0",		411,	R8A779G0_CLK_VIOBUSD2),
 	DEF_MOD("dsitxlink0",	415,	R8A779G0_CLK_VIOBUSD2),
 	DEF_MOD("dsitxlink1",	416,	R8A779G0_CLK_VIOBUSD2),
@@ -181,6 +184,8 @@ static const struct mssr_mod_clk r8a779g0_mod_clks[] __initconst = {
 	DEF_MOD("i2c4",		522,	R8A779G0_CLK_S0D6_PER),
 	DEF_MOD("i2c5",		523,	R8A779G0_CLK_S0D6_PER),
 	DEF_MOD("irqc",		611,	R8A779G0_CLK_CL16M),
+	DEF_MOD("ispcs0",	612,	R8A779G0_CLK_S0D2_VIO),
+	DEF_MOD("ispcs1",	613,	R8A779G0_CLK_S0D2_VIO),
 	DEF_MOD("msi0",		618,	R8A779G0_CLK_MSO),
 	DEF_MOD("msi1",		619,	R8A779G0_CLK_MSO),
 	DEF_MOD("msi2",		620,	R8A779G0_CLK_MSO),
@@ -202,6 +207,22 @@ static const struct mssr_mod_clk r8a779g0_mod_clks[] __initconst = {
 	DEF_MOD("tmu3",		716,	R8A779G0_CLK_SASYNCPERD2),
 	DEF_MOD("tmu4",		717,	R8A779G0_CLK_SASYNCPERD2),
 	DEF_MOD("tpu0",		718,	R8A779G0_CLK_SASYNCPERD4),
+	DEF_MOD("vin00",	730,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin01",	731,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin02",	800,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin03",	801,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin04",	802,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin05",	803,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin06",	804,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin07",	805,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin10",	806,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin11",	807,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin12",	808,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin13",	809,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin14",	810,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin15",	811,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin16",	812,	R8A779G0_CLK_S0D4_VIO),
+	DEF_MOD("vin17",	813,	R8A779G0_CLK_S0D4_VIO),
 	DEF_MOD("vspd0",	830,	R8A779G0_CLK_VIOBUSD2),
 	DEF_MOD("vspd1",	831,	R8A779G0_CLK_VIOBUSD2),
 	DEF_MOD("wdt1:wdt0",	907,	R8A779G0_CLK_R),
@@ -213,6 +234,9 @@ static const struct mssr_mod_clk r8a779g0_mod_clks[] __initconst = {
 	DEF_MOD("pfc1",		916,	R8A779G0_CLK_CL16M),
 	DEF_MOD("pfc2",		917,	R8A779G0_CLK_CL16M),
 	DEF_MOD("pfc3",		918,	R8A779G0_CLK_CL16M),
+	DEF_MOD("tsc",		919,	R8A779G0_CLK_CL16M),
+	DEF_MOD("ssiu",		2926,	R8A779G0_CLK_S0D6_PER),
+	DEF_MOD("ssi",		2927,	R8A779G0_CLK_S0D6_PER),
 };

 /*

--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
--- a/drivers/clk/renesas/rcar-usb2-clock-sel.c
+++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c
@@ -125,15 +125,13 @@ static int rcar_usb2_clock_sel_resume(struct device *dev)
 	return 0;
 }

-static int rcar_usb2_clock_sel_remove(struct platform_device *pdev)
+static void rcar_usb2_clock_sel_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;

 	of_clk_del_provider(dev->of_node);
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-
-	return 0;
 }

 static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
@@ -215,7 +213,7 @@ static struct platform_driver rcar_usb2_clock_sel_driver = {
 		.pm	= &rcar_usb2_clock_sel_pm_ops,
 	},
 	.probe		= rcar_usb2_clock_sel_probe,
-	.remove		= rcar_usb2_clock_sel_remove,
+	.remove_new	= rcar_usb2_clock_sel_remove,
 };
 builtin_platform_driver(rcar_usb2_clock_sel_driver);


--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -61,7 +61,7 @@ static const u16 mstpsr_for_gen4[] = {
 	0x2E00, 0x2E04, 0x2E08, 0x2E0C, 0x2E10, 0x2E14, 0x2E18, 0x2E1C,
 	0x2E20, 0x2E24, 0x2E28, 0x2E2C, 0x2E30, 0x2E34, 0x2E38, 0x2E3C,
 	0x2E40, 0x2E44, 0x2E48, 0x2E4C, 0x2E50, 0x2E54, 0x2E58, 0x2E5C,
-	0x2E60, 0x2E64, 0x2E68, 0x2E6C,
+	0x2E60, 0x2E64, 0x2E68, 0x2E6C, 0x2E70, 0x2E74,
 };

 /*
@@ -77,7 +77,7 @@ static const u16 mstpcr_for_gen4[] = {
 	0x2D00, 0x2D04, 0x2D08, 0x2D0C, 0x2D10, 0x2D14, 0x2D18, 0x2D1C,
 	0x2D20, 0x2D24, 0x2D28, 0x2D2C, 0x2D30, 0x2D34, 0x2D38, 0x2D3C,
 	0x2D40, 0x2D44, 0x2D48, 0x2D4C, 0x2D50, 0x2D54, 0x2D58, 0x2D5C,
-	0x2D60, 0x2D64, 0x2D68, 0x2D6C,
+	0x2D60, 0x2D64, 0x2D68, 0x2D6C, 0x2D70, 0x2D74,
 };

 /*
@@ -103,7 +103,7 @@ static const u16 srcr_for_gen4[] = {
 	0x2C00, 0x2C04, 0x2C08, 0x2C0C, 0x2C10, 0x2C14, 0x2C18, 0x2C1C,
 	0x2C20, 0x2C24, 0x2C28, 0x2C2C, 0x2C30, 0x2C34, 0x2C38, 0x2C3C,
 	0x2C40, 0x2C44, 0x2C48, 0x2C4C, 0x2C50, 0x2C54, 0x2C58, 0x2C5C,
-	0x2C60, 0x2C64, 0x2C68, 0x2C6C,
+	0x2C60, 0x2C64, 0x2C68, 0x2C6C, 0x2C70, 0x2C74,
 };

 /*
@@ -119,7 +119,7 @@ static const u16 srstclr_for_gen4[] = {
 	0x2C80, 0x2C84, 0x2C88, 0x2C8C, 0x2C90, 0x2C94, 0x2C98, 0x2C9C,
 	0x2CA0, 0x2CA4, 0x2CA8, 0x2CAC, 0x2CB0, 0x2CB4, 0x2CB8, 0x2CBC,
 	0x2CC0, 0x2CC4, 0x2CC8, 0x2CCC, 0x2CD0, 0x2CD4, 0x2CD8, 0x2CDC,
-	0x2CE0, 0x2CE4, 0x2CE8, 0x2CEC,
+	0x2CE0, 0x2CE4, 0x2CE8, 0x2CEC, 0x2CF0, 0x2CF4,
 };

 /**

--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -2,8 +2,8 @@

 menuconfig CLK_SIFIVE
 	bool "SiFive SoC driver support"
-	depends on SOC_SIFIVE || COMPILE_TEST
-	default SOC_SIFIVE
+	depends on ARCH_SIFIVE || COMPILE_TEST
+	default ARCH_SIFIVE
 	help
 	  SoC drivers for SiFive Linux-capable SoCs.

@@ -11,7 +11,7 @@ if CLK_SIFIVE

 config CLK_SIFIVE_PRCI
 	bool "PRCI driver for SiFive SoCs"
-	default SOC_SIFIVE
+	default ARCH_SIFIVE
 	select RESET_CONTROLLER
 	select RESET_SIMPLE
 	select CLK_ANALOGBITS_WRPLL_CLN28HPC

--- a/drivers/clk/sprd/common.c
+++ b/drivers/clk/sprd/common.c
@@ -44,7 +44,7 @@ int sprd_clk_regmap_init(struct platform_device *pdev,
 	struct device_node *node = dev->of_node, *np;
 	struct regmap *regmap;

-	if (of_find_property(node, "sprd,syscon", NULL)) {
+	if (of_property_present(node, "sprd,syscon")) {
 		regmap = syscon_regmap_lookup_by_phandle(node, "sprd,syscon");
 		if (IS_ERR(regmap)) {
 			pr_err("%s: failed to get syscon regmap\n", __func__);

--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -21,24 +21,24 @@
 #define MISC_CLK_ENB 0x48

 #define OSC_CTRL 0x50
-#define OSC_CTRL_OSC_FREQ_MASK (3<<30)
-#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30)
-#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30)
-#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30)
-#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30)
-#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
-
-#define OSC_CTRL_PLL_REF_DIV_MASK (3<<28)
-#define OSC_CTRL_PLL_REF_DIV_1		(0<<28)
-#define OSC_CTRL_PLL_REF_DIV_2		(1<<28)
-#define OSC_CTRL_PLL_REF_DIV_4		(2<<28)
+#define OSC_CTRL_OSC_FREQ_MASK (3u<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ (0u<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ (1u<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ (2u<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ (3u<<30)
+#define OSC_CTRL_MASK (0x3f2u | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_CTRL_PLL_REF_DIV_MASK	(3u<<28)
+#define OSC_CTRL_PLL_REF_DIV_1		(0u<<28)
+#define OSC_CTRL_PLL_REF_DIV_2		(1u<<28)
+#define OSC_CTRL_PLL_REF_DIV_4		(2u<<28)

 #define OSC_FREQ_DET 0x58
-#define OSC_FREQ_DET_TRIG (1<<31)
+#define OSC_FREQ_DET_TRIG (1u<<31)

 #define OSC_FREQ_DET_STATUS 0x5c
-#define OSC_FREQ_DET_BUSY (1<<31)
-#define OSC_FREQ_DET_CNT_MASK 0xFFFF
+#define OSC_FREQ_DET_BUSYu (1<<31)
+#define OSC_FREQ_DET_CNT_MASK 0xFFFFu

 #define TEGRA20_CLK_PERIPH_BANKS	3


--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -512,16 +512,16 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 	struct clk_hw_omap *hw;
 	struct clk *clk;
 	struct omap_clkctrl_clk *clkctrl_clk = NULL;
-	const __be32 *addrp;
 	bool legacy_naming;
 	const char *clkctrl_name;
 	u32 addr;
 	int ret;
 	char *c;
 	u16 soc_mask = 0;
+	struct resource res;

-	addrp = of_get_address(node, 0, NULL, NULL);
-	addr = (u32)of_translate_address(node, addrp);
+	of_address_to_resource(node, 0, &res);
+	addr = (u32)res.start;

 #ifdef CONFIG_ARCH_OMAP4
 	if (of_machine_is_compatible("ti,omap4"))

--- a/drivers/clk/visconti/pll.h
+++ b/drivers/clk/visconti/pll.h
@@ -15,7 +15,6 @@

 struct visconti_pll_provider {
 	void __iomem *reg_base;
-	struct regmap *regmap;
 	struct clk_hw_onecell_data clk_data;
 	struct device_node *node;
 };

--- a/include/dt-bindings/clock/ast2600-clock.h
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -57,8 +57,6 @@
 #define ASPEED_CLK_GATE_I3C3CLK		40
 #define ASPEED_CLK_GATE_I3C4CLK		41
 #define ASPEED_CLK_GATE_I3C5CLK		42
-#define ASPEED_CLK_GATE_I3C6CLK		43
-#define ASPEED_CLK_GATE_I3C7CLK		44

 #define ASPEED_CLK_GATE_FSICLK		45

@@ -87,8 +85,9 @@
 #define ASPEED_CLK_MAC2RCLK		68
 #define ASPEED_CLK_MAC3RCLK		69
 #define ASPEED_CLK_MAC4RCLK		70
+#define ASPEED_CLK_I3C			71

-/* Only list resets here that are not part of a gate */
+/* Only list resets here that are not part of a clock gate + reset pair */
 #define ASPEED_RESET_ADC		55
 #define ASPEED_RESET_JTAG_MASTER2	54
 #define ASPEED_RESET_I3C_DMA		39