PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum

Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.

If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed.  That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.

See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details.  Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.

Add a new flag, clear_retrain_link, in struct pci_dev.  Quirks for affected
devices set this bit.

Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org

drivers/pci/pcie/aspm.c

@@ -205,6 +205,15 @@ static bool pcie_retrain_link(struct pcie_link_state *link)
 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
 	reg16 |= PCI_EXP_LNKCTL_RL;
 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+	if (parent->clear_retrain_link) {
+		/*
+		 * Due to an erratum in some devices the Retrain Link bit
+		 * needs to be cleared again manually to allow the link
+		 * training to succeed.
+		 */
+		reg16 &= ~PCI_EXP_LNKCTL_RL;
+		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+	}
 
 	/* Wait for link training end. Break out after waiting for timeout */
 	start_jiffies = jiffies;

drivers/pci/quirks.c

@@ -2245,6 +2245,23 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
 
+/*
+ * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
+ * Link bit cleared after starting the link retrain process to allow this
+ * process to finish.
+ *
+ * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130.  See also the
+ * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf.
+ */
+static void quirk_enable_clear_retrain_link(struct pci_dev *dev)
+{
+	dev->clear_retrain_link = 1;
+	pci_info(dev, "Enable PCIe Retrain Link quirk\n");
+}
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe110, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe111, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe130, quirk_enable_clear_retrain_link);
+
 static void fixup_rev1_53c810(struct pci_dev *dev)
 {
 	u32 class = dev->class;

include/linux/pci.h

@@ -348,6 +348,8 @@ struct pci_dev {
 	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
 						      controlled exclusively by
 						      user sysfs */
+	unsigned int	clear_retrain_link:1;	/* Need to clear Retrain Link
+						   bit manually */
 	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
 	unsigned int	d3cold_delay;	/* D3cold->D0 transition time in ms */