Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - update the ili210x touchscreen driver, refreshing the code and adding
   support for ILI251X line

 - add support for st1633 to the st1232 touchscreen driver

 - add support for sx8650 to the the sx8654 touchscreen driver

 - add support for Evervision FT5726 to the edt-ft5x06 touchscreen
   driver

 - add support for gt5688 to the Goodix touchscreen driver

 - new vibrator driver for MSM SOCs

 - miscellaneous fixes for the rest of input drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: wacom_serial4 - add support for Wacom ArtPad II tablet
  Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
  Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
  Input: msm-vibrator - use correct gpio header
  Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
  Input: i8042 - rework DT node name comparisons
  Input: goodix - print values in case of inconsistencies
  Input: goodix - refer to touchscreen.txt in device tree bindings
  Input: goodix - support Goodix gt5688
  Input: synaptics_i2c - remove redundant spinlock
  Input: db9 - mark expected switch fall-through
  Input: qt2160 - remove redundant spinlock
  Input: st1232 - handle common DT bindings
  Input: ims-pcu - switch to using brightness_set_blocking()
  Input: st1232 - switch to gpiod API
  Input: ili210x - fetch touchscreen geometry from DT
  Input: msm-vibrator - tweak an error message
  Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
  Input: stmfts - acknowledge that setting brightness is a blocking call
  Input: ili210x - switch to using devm_device_add_group()
  ...

Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt

 Samsung tm2-touchkey
 
 Required properties:
-- compatible: must be "cypress,tm2-touchkey"
+- compatible:
+    * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
+    * "cypress,midas-touchkey" - for the touchkey found on midas boards
+    * "cypress,aries-touchkey" - for the touchkey found on aries boards
 - reg: I2C address of the chip.
 - interrupts: interrupt to which the chip is connected (see interrupt
 	binding[0]).
 - vcc-supply : internal regulator output. 1.8V
 - vdd-supply : power supply for IC 3.3V
 
+Optional properties:
+- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK
+
 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
 Example:
@@ -21,5 +27,6 @@ Example:
 			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 			vcc-supply=<&ldo32_reg>;
 			vdd-supply=<&ldo33_reg>;
+			linux,keycodes = <KEY_PHONE KEY_BACK>;
 		};
 	};

Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt

+Ilitek ILI210x/ILI251x touchscreen controller
+
+Required properties:
+- compatible:
+    ilitek,ili210x for ILI210x
+    ilitek,ili251x for ILI251x
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchscreen's IRQ output
+    See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
+Example:
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	};

Documentation/devicetree/bindings/input/msm-vibrator.txt

+* Device tree bindings for the Qualcomm MSM vibrator
+
+Required properties:
+
+  - compatible: Should be one of
+		"qcom,msm8226-vibrator"
+		"qcom,msm8974-vibrator"
+  - reg: the base address and length of the IO memory for the registers.
+  - pinctrl-names: set to default.
+  - pinctrl-0: phandles pointing to pin configuration nodes. See
+               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+  - clock-names: set to pwm
+  - clocks: phandle of the clock. See
+            Documentation/devicetree/bindings/clock/clock-bindings.txt
+  - enable-gpios: GPIO that enables the vibrator.
+
+Optional properties:
+
+  - vcc-supply: phandle to the regulator that provides power to the sensor.
+
+Example from a LG Nexus 5 (hammerhead) phone:
+
+vibrator@fd8c3450 {
+	reg = <0xfd8c3450 0x400>;
+	compatible = "qcom,msm8974-vibrator";
+
+	vcc-supply = <&pm8941_l19>;
+
+	clocks = <&mmcc CAMSS_GP1_CLK>;
+	clock-names = "pwm";
+
+	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&vibrator_pin>;
+};

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

 FocalTech EDT-FT5x06 Polytouch driver
 =====================================
 
-There are 3 variants of the chip for various touch panel sizes
+There are 5 variants of the chip for various touch panel sizes
 FT5206GE1  2.8" .. 3.8"
 FT5306DE4  4.3" .. 7"
 FT5406EE8  7"   .. 8.9"
 FT5506EEG  7"   .. 8.9"
+FT5726NEI  5.7” .. 11.6"
 
 The software interface is identical for all those chips, so that
 currently there is no need for the driver to distinguish between the
@@ -19,6 +20,7 @@ Required properties:
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
            or:  "edt,edt-ft5506"
+           or:  "evervision,ev-ft5726"
            or:  "focaltech,ft6236"
 
  - reg:         I2C slave address of the chip (0x38)
@@ -42,6 +44,15 @@ Optional properties:
 
  - offset:      allows setting the edge compensation in the range from
                 0 to 31.
+
+ - offset-x:    Same as offset, but applies only to the horizontal position.
+                Range from 0 to 80, only supported by evervision,ev-ft5726
+                devices.
+
+ - offset-y:    Same as offset, but applies only to the vertical position.
+                Range from 0 to 80, only supported by evervision,ev-ft5726
+                devices.
+
  - touchscreen-size-x	   : See touchscreen.txt
  - touchscreen-size-y	   : See touchscreen.txt
  - touchscreen-fuzz-x      : See touchscreen.txt

Documentation/devicetree/bindings/input/touchscreen/goodix.txt

@@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
 Required properties:
 
  - compatible		: Should be "goodix,gt1151"
+				 or "goodix,gt5688"
 				 or "goodix,gt911"
 				 or "goodix,gt9110"
 				 or "goodix,gt912"
@@ -18,11 +19,14 @@ Optional properties:
  - irq-gpios		: GPIO pin used for IRQ. The driver uses the
 			  interrupt gpio pin as output to reset the device.
  - reset-gpios		: GPIO pin used for reset
-
- - touchscreen-inverted-x  : X axis is inverted (boolean)
- - touchscreen-inverted-y  : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
-                             (swapping is done after inverting the axis)
+ - touchscreen-inverted-x
+ - touchscreen-inverted-y
+ - touchscreen-size-x
+ - touchscreen-size-y
+ - touchscreen-swapped-x-y
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
 
 Example:
 

Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt

-* Sitronix st1232 touchscreen controller
+* Sitronix st1232 or st1633 touchscreen controller
 
 Required properties:
-- compatible: must be "sitronix,st1232"
+- compatible: must contain one of
+  * "sitronix,st1232"
+  * "sitronix,st1633"
 - reg: I2C address of the chip
 - interrupts: interrupt to which the chip is connected
 
 Optional properties:
 - gpios: a phandle to the reset GPIO
 
+For additional optional properties see: touchscreen.txt
+
 Example:
 
 	i2c@00000000 {

Documentation/devicetree/bindings/input/touchscreen/sx8654.txt

 * Semtech SX8654 I2C Touchscreen Controller
 
 Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+	"semtech,sx8650"
+	"semtech,sx8654"
+	"semtech,sx8655"
+	"semtech,sx8656"
 - reg: i2c slave address
 - interrupts: touch controller interrupt
 
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
 Example:
 
 	sx8654@48 {
@@ -12,4 +19,5 @@ Example:
 		reg = <0x48>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 	};

drivers/input/joystick/db9.c

@@ -259,7 +259,7 @@ static unsigned char db9_saturn_read_packet(struct parport *port, unsigned char
 			db9_saturn_write_sub(port, type, 3, powered, 0);
 			return data[0] = 0xe3;
 		}
-		/* else: fall through */
+		/* fall through */
 	default:
 		return data[0];
 	}

drivers/input/keyboard/gpio_keys.c

@@ -1015,8 +1015,18 @@ static int __maybe_unused gpio_keys_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);
 
+static void gpio_keys_shutdown(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = gpio_keys_suspend(&pdev->dev);
+	if (ret)
+		dev_err(&pdev->dev, "failed to shutdown\n");
+}
+
 static struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
+	.shutdown	= gpio_keys_shutdown,
 	.driver		= {
 		.name	= "gpio-keys",
 		.pm	= &gpio_keys_pm_ops,

drivers/input/keyboard/mcs_touchkey.c

@@ -113,8 +113,7 @@ static int mcs_touchkey_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	data = kzalloc(sizeof(struct mcs_touchkey_data) +
-			sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
+	data = kzalloc(struct_size(data, keycodes, pdata->key_maxval + 1),
 		       GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!data || !input_dev) {

drivers/input/keyboard/mtk-pmic-keys.c

@@ -14,18 +14,17 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/platform_device.h>
 #include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/regmap.h>
 #include <linux/mfd/mt6323/registers.h>
-#include <linux/mfd/mt6397/registers.h>
 #include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
 
 #define MTK_PMIC_PWRKEY_RST_EN_MASK	0x1
 #define MTK_PMIC_PWRKEY_RST_EN_SHIFT	6

drivers/input/keyboard/qt2160.c

@@ -68,7 +68,6 @@ struct qt2160_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct delayed_work dwork;
-	spinlock_t lock;        /* Protects canceling/rescheduling of dwork */
 	unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
 	u16 key_matrix;
 #ifdef CONFIG_LEDS_CLASS
@@ -212,22 +211,15 @@ static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
 static irqreturn_t qt2160_irq(int irq, void *_qt2160)
 {
 	struct qt2160_data *qt2160 = _qt2160;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qt2160->lock, flags);
 
 	mod_delayed_work(system_wq, &qt2160->dwork, 0);
 
-	spin_unlock_irqrestore(&qt2160->lock, flags);
-
 	return IRQ_HANDLED;
 }
 
 static void qt2160_schedule_read(struct qt2160_data *qt2160)
 {
-	spin_lock_irq(&qt2160->lock);
 	schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
-	spin_unlock_irq(&qt2160->lock);
 }
 
 static void qt2160_worker(struct work_struct *work)
@@ -391,7 +383,6 @@ static int qt2160_probe(struct i2c_client *client,
 	qt2160->client = client;
 	qt2160->input = input;
 	INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
-	spin_lock_init(&qt2160->lock);
 
 	input->name = "AT42QT2160 Touch Sense Keyboard";
 	input->id.bustype = BUS_I2C;

drivers/input/keyboard/tca6416-keypad.c

@@ -219,9 +219,7 @@ static int tca6416_keypad_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	chip = kzalloc(sizeof(struct tca6416_keypad_chip) +
-		       pdata->nbuttons * sizeof(struct tca6416_button),
-		       GFP_KERNEL);
+	chip = kzalloc(struct_size(chip, buttons, pdata->nbuttons), GFP_KERNEL);
 	input = input_allocate_device();
 	if (!chip || !input) {
 		error = -ENOMEM;

drivers/input/keyboard/tm2-touchkey.c

@@ -22,12 +22,14 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pm.h>
 #include <linux/regulator/consumer.h>
 
 #define TM2_TOUCHKEY_DEV_NAME		"tm2-touchkey"
-#define TM2_TOUCHKEY_KEYCODE_REG	0x03
-#define TM2_TOUCHKEY_BASE_REG		0x00
+
+#define ARIES_TOUCHKEY_CMD_LED_ON	0x1
+#define ARIES_TOUCHKEY_CMD_LED_OFF	0x2
 #define TM2_TOUCHKEY_CMD_LED_ON		0x10
 #define TM2_TOUCHKEY_CMD_LED_OFF	0x20
 #define TM2_TOUCHKEY_BIT_PRESS_EV	BIT(3)
@@ -35,9 +37,13 @@
 #define TM2_TOUCHKEY_LED_VOLTAGE_MIN	2500000
 #define TM2_TOUCHKEY_LED_VOLTAGE_MAX	3300000
 
-enum {
-	TM2_TOUCHKEY_KEY_MENU = 0x1,
-	TM2_TOUCHKEY_KEY_BACK,
+struct touchkey_variant {
+	u8 keycode_reg;
+	u8 base_reg;
+	u8 cmd_led_on;
+	u8 cmd_led_off;
+	bool no_reg;
+	bool fixed_regulator;
 };
 
 struct tm2_touchkey_data {
@@ -46,9 +52,33 @@ struct tm2_touchkey_data {
 	struct led_classdev led_dev;
 	struct regulator *vdd;
 	struct regulator_bulk_data regulators[2];
+	const struct touchkey_variant *variant;
+	u32 keycodes[4];
+	int num_keycodes;
+};
+
+static const struct touchkey_variant tm2_touchkey_variant = {
+	.keycode_reg = 0x03,
+	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static const struct touchkey_variant midas_touchkey_variant = {
+	.keycode_reg = 0x00,
+	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
 };
 
-static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
+static struct touchkey_variant aries_touchkey_variant = {
+	.no_reg = true,
+	.fixed_regulator = true,
+	.cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF,
+};
+
+static int tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
 					    enum led_brightness brightness)
 {
 	struct tm2_touchkey_data *touchkey =
@@ -58,15 +88,19 @@ static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
 
 	if (brightness == LED_OFF) {
 		volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
-		data = TM2_TOUCHKEY_CMD_LED_OFF;
+		data = touchkey->variant->cmd_led_off;
 	} else {
 		volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
-		data = TM2_TOUCHKEY_CMD_LED_ON;
+		data = touchkey->variant->cmd_led_on;
 	}
 
+	if (!touchkey->variant->fixed_regulator)
 		regulator_set_voltage(touchkey->vdd, volt, volt);
+
+	return touchkey->variant->no_reg ?
+		i2c_smbus_write_byte(touchkey->client, data) :
 		i2c_smbus_write_byte_data(touchkey->client,
-				  TM2_TOUCHKEY_BASE_REG, data);
+					  touchkey->variant->base_reg, data);
 }
 
 static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
@@ -96,49 +130,57 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 {
 	struct tm2_touchkey_data *touchkey = devid;
 	int data;
-	int key;
+	int index;
+	int i;
 
+	if (touchkey->variant->no_reg)
+		data = i2c_smbus_read_byte(touchkey->client);
+	else
 		data = i2c_smbus_read_byte_data(touchkey->client,
-					TM2_TOUCHKEY_KEYCODE_REG);
+						touchkey->variant->keycode_reg);
 	if (data < 0) {
 		dev_err(&touchkey->client->dev,
 			"failed to read i2c data: %d\n", data);
 		goto out;
 	}
 
-	switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
-	case TM2_TOUCHKEY_KEY_MENU:
-		key = KEY_PHONE;
-		break;
-
-	case TM2_TOUCHKEY_KEY_BACK:
-		key = KEY_BACK;
-		break;
-
-	default:
+	index = (data & TM2_TOUCHKEY_BIT_KEYCODE) - 1;
+	if (index < 0 || index >= touchkey->num_keycodes) {
 		dev_warn(&touchkey->client->dev,
-			 "unhandled keycode, data %#02x\n", data);
+			 "invalid keycode index %d\n", index);
 		goto out;
 	}
 
 	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
-		input_report_key(touchkey->input_dev, KEY_PHONE, 0);
-		input_report_key(touchkey->input_dev, KEY_BACK, 0);
+		for (i = 0; i < touchkey->num_keycodes; i++)
+			input_report_key(touchkey->input_dev,
+					 touchkey->keycodes[i], 0);
 	} else {
-		input_report_key(touchkey->input_dev, key, 1);
+		input_report_key(touchkey->input_dev,
+				 touchkey->keycodes[index], 1);
 	}
 
 	input_sync(touchkey->input_dev);
 
 out:
+	if (touchkey->variant->fixed_regulator &&
+				data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+		/* touch turns backlight on, so make sure we're in sync */
+		if (touchkey->led_dev.brightness == LED_OFF)
+			tm2_touchkey_led_brightness_set(&touchkey->led_dev,
+							LED_OFF);
+	}
+
 	return IRQ_HANDLED;
 }
 
 static int tm2_touchkey_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct tm2_touchkey_data *touchkey;
 	int error;
+	int i;
 
 	if (!i2c_check_functionality(client->adapter,
 			I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -153,6 +195,8 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	touchkey->client = client;
 	i2c_set_clientdata(client, touchkey);
 
+	touchkey->variant = of_device_get_match_data(&client->dev);
+
 	touchkey->regulators[0].supply = "vcc";
 	touchkey->regulators[1].supply = "vdd";
 	error = devm_regulator_bulk_get(&client->dev,
@@ -166,6 +210,16 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	/* Save VDD for easy access */
 	touchkey->vdd = touchkey->regulators[1].consumer;
 
+	touchkey->num_keycodes = of_property_read_variable_u32_array(np,
+					"linux,keycodes", touchkey->keycodes, 0,
+					ARRAY_SIZE(touchkey->keycodes));
+	if (touchkey->num_keycodes <= 0) {
+		/* default keycodes */
+		touchkey->keycodes[0] = KEY_PHONE;
+		touchkey->keycodes[1] = KEY_BACK;
+		touchkey->num_keycodes = 2;
+	}
+
 	error = tm2_touchkey_power_enable(touchkey);
 	if (error) {
 		dev_err(&client->dev, "failed to power up device: %d\n", error);
@@ -190,8 +244,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
 	touchkey->input_dev->id.bustype = BUS_I2C;
 
-	input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
-	input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
+	for (i = 0; i < touchkey->num_keycodes; i++)
+		input_set_capability(touchkey->input_dev, EV_KEY,
+				     touchkey->keycodes[i]);
 
 	error = input_register_device(touchkey->input_dev);
 	if (error) {
@@ -212,9 +267,10 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 
 	/* led device */
 	touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME;
-	touchkey->led_dev.brightness = LED_FULL;
+	touchkey->led_dev.brightness = LED_ON;
 	touchkey->led_dev.max_brightness = LED_ON;
-	touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set;
+	touchkey->led_dev.brightness_set_blocking =
+					tm2_touchkey_led_brightness_set;
 
 	error = devm_led_classdev_register(&client->dev, &touchkey->led_dev);
 	if (error) {
@@ -223,6 +279,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 		return error;
 	}
 
+	if (touchkey->variant->fixed_regulator)
+		tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON);
+
 	return 0;
 }
 
@@ -262,7 +321,16 @@ static const struct i2c_device_id tm2_touchkey_id_table[] = {
 MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table);
 
 static const struct of_device_id tm2_touchkey_of_match[] = {
-	{ .compatible = "cypress,tm2-touchkey", },
+	{
+		.compatible = "cypress,tm2-touchkey",
+		.data = &tm2_touchkey_variant,
+	}, {
+		.compatible = "cypress,midas-touchkey",
+		.data = &midas_touchkey_variant,
+	}, {
+		.compatible = "cypress,aries-touchkey",
+		.data = &aries_touchkey_variant,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match);

drivers/input/misc/Kconfig

@@ -117,6 +117,16 @@ config INPUT_E3X0_BUTTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called e3x0_button.
 
+config INPUT_MSM_VIBRATOR
+	tristate "Qualcomm MSM vibrator driver"
+	select INPUT_FF_MEMLESS
+	help
+	  Support for the vibrator that is found on various Qualcomm MSM
+	  SOCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called msm_vibrator.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM

drivers/input/misc/Makefile

@@ -48,6 +48,7 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
 obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
+obj-$(CONFIG_INPUT_MSM_VIBRATOR)	+= msm-vibrator.o
 obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON)	+= palmas-pwrbutton.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o

drivers/input/misc/ims-pcu.c

@@ -39,8 +39,6 @@ struct ims_pcu_gamepad {
 
 struct ims_pcu_backlight {
 	struct led_classdev cdev;
-	struct work_struct work;
-	enum led_brightness desired_brightness;
 	char name[32];
 };
 
@@ -949,14 +947,14 @@ static void ims_pcu_process_async_firmware(const struct firmware *fw,
 
 #define IMS_PCU_MAX_BRIGHTNESS		31998
 
-static void ims_pcu_backlight_work(struct work_struct *work)
+static int ims_pcu_backlight_set_brightness(struct led_classdev *cdev,
+					    enum led_brightness value)
 {
 	struct ims_pcu_backlight *backlight =
-			container_of(work, struct ims_pcu_backlight, work);
+			container_of(cdev, struct ims_pcu_backlight, cdev);
 	struct ims_pcu *pcu =
 			container_of(backlight, struct ims_pcu, backlight);
-	int desired_brightness = backlight->desired_brightness;
-	__le16 br_val = cpu_to_le16(desired_brightness);
+	__le16 br_val = cpu_to_le16(value);
 	int error;
 
 	mutex_lock(&pcu->cmd_mutex);
@@ -966,19 +964,11 @@ static void ims_pcu_backlight_work(struct work_struct *work)
 	if (error && error != -ENODEV)
 		dev_warn(pcu->dev,
 			 "Failed to set desired brightness %u, error: %d\n",
-			 desired_brightness, error);
+			 value, error);
 
 	mutex_unlock(&pcu->cmd_mutex);
-}
 
-static void ims_pcu_backlight_set_brightness(struct led_classdev *cdev,
-					     enum led_brightness value)
-{
-	struct ims_pcu_backlight *backlight =
-			container_of(cdev, struct ims_pcu_backlight, cdev);
-
-	backlight->desired_brightness = value;
-	schedule_work(&backlight->work);
+	return error;
 }
 
 static enum led_brightness
@@ -1015,14 +1005,14 @@ static int ims_pcu_setup_backlight(struct ims_pcu *pcu)
 	struct ims_pcu_backlight *backlight = &pcu->backlight;
 	int error;
 
-	INIT_WORK(&backlight->work, ims_pcu_backlight_work);
 	snprintf(backlight->name, sizeof(backlight->name),
 		 "pcu%d::kbd_backlight", pcu->device_no);
 
 	backlight->cdev.name = backlight->name;
 	backlight->cdev.max_brightness = IMS_PCU_MAX_BRIGHTNESS;
 	backlight->cdev.brightness_get = ims_pcu_backlight_get_brightness;
-	backlight->cdev.brightness_set = ims_pcu_backlight_set_brightness;
+	backlight->cdev.brightness_set_blocking =
+					 ims_pcu_backlight_set_brightness;
 
 	error = led_classdev_register(pcu->dev, &backlight->cdev);
 	if (error) {
@@ -1040,7 +1030,6 @@ static void ims_pcu_destroy_backlight(struct ims_pcu *pcu)
 	struct ims_pcu_backlight *backlight = &pcu->backlight;
 
 	led_classdev_unregister(&backlight->cdev);
-	cancel_work_sync(&backlight->work);
 }
 
 

drivers/input/misc/msm-vibrator.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm MSM vibrator driver
+ *
+ * Copyright (c) 2018 Brian Masney <masneyb@onstation.org>
+ *
+ * Based on qcom,pwm-vibrator.c from:
+ * Copyright (c) 2018 Jonathan Marek <jonathan@marek.ca>
+ *
+ * Based on msm_pwm_vibrator.c from downstream Android sources:
+ * Copyright (C) 2009-2014 LGE, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define REG_CMD_RCGR           0x00
+#define REG_CFG_RCGR           0x04
+#define REG_M                  0x08
+#define REG_N                  0x0C
+#define REG_D                  0x10
+#define REG_CBCR               0x24
+#define MMSS_CC_M_DEFAULT      1
+
+struct msm_vibrator {
+	struct input_dev *input;
+	struct mutex mutex;
+	struct work_struct worker;
+	void __iomem *base;
+	struct regulator *vcc;
+	struct clk *clk;
+	struct gpio_desc *enable_gpio;
+	u16 magnitude;
+	bool enabled;
+};
+
+static void msm_vibrator_write(struct msm_vibrator *vibrator, int offset,
+			       u32 value)
+{
+	writel(value, vibrator->base + offset);
+}
+
+static int msm_vibrator_start(struct msm_vibrator *vibrator)
+{
+	int d_reg_val, ret = 0;
+
+	mutex_lock(&vibrator->mutex);
+
+	if (!vibrator->enabled) {
+		ret = clk_set_rate(vibrator->clk, 24000);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to set clock rate: %d\n", ret);
+			goto unlock;
+		}
+
+		ret = clk_prepare_enable(vibrator->clk);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to enable clock: %d\n", ret);
+			goto unlock;
+		}
+
+		ret = regulator_enable(vibrator->vcc);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to enable regulator: %d\n", ret);
+			clk_disable(vibrator->clk);
+			goto unlock;
+		}
+
+		gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
+
+		vibrator->enabled = true;
+	}
+
+	d_reg_val = 127 - ((126 * vibrator->magnitude) / 0xffff);
+	msm_vibrator_write(vibrator, REG_CFG_RCGR,
+			   (2 << 12) | /* dual edge mode */
+			   (0 << 8) |  /* cxo */
+			   (7 << 0));
+	msm_vibrator_write(vibrator, REG_M, 1);
+	msm_vibrator_write(vibrator, REG_N, 128);
+	msm_vibrator_write(vibrator, REG_D, d_reg_val);
+	msm_vibrator_write(vibrator, REG_CMD_RCGR, 1);
+	msm_vibrator_write(vibrator, REG_CBCR, 1);
+
+unlock:
+	mutex_unlock(&vibrator->mutex);
+
+	return ret;
+}
+
+static void msm_vibrator_stop(struct msm_vibrator *vibrator)
+{
+	mutex_lock(&vibrator->mutex);
+
+	if (vibrator->enabled) {
+		gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
+		regulator_disable(vibrator->vcc);
+		clk_disable(vibrator->clk);
+		vibrator->enabled = false;
+	}
+
+	mutex_unlock(&vibrator->mutex);
+}
+
+static void msm_vibrator_worker(struct work_struct *work)
+{
+	struct msm_vibrator *vibrator = container_of(work,
+						     struct msm_vibrator,
+						     worker);
+
+	if (vibrator->magnitude)
+		msm_vibrator_start(vibrator);
+	else
+		msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_play_effect(struct input_dev *dev, void *data,
+				    struct ff_effect *effect)
+{
+	struct msm_vibrator *vibrator = input_get_drvdata(dev);
+
+	mutex_lock(&vibrator->mutex);
+
+	if (effect->u.rumble.strong_magnitude > 0)
+		vibrator->magnitude = effect->u.rumble.strong_magnitude;
+	else
+		vibrator->magnitude = effect->u.rumble.weak_magnitude;
+
+	mutex_unlock(&vibrator->mutex);
+
+	schedule_work(&vibrator->worker);
+
+	return 0;
+}
+
+static void msm_vibrator_close(struct input_dev *input)
+{
+	struct msm_vibrator *vibrator = input_get_drvdata(input);
+
+	cancel_work_sync(&vibrator->worker);
+	msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_probe(struct platform_device *pdev)
+{
+	struct msm_vibrator *vibrator;
+	struct resource *res;
+	int ret;
+
+	vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
+	if (!vibrator)
+		return -ENOMEM;
+
+	vibrator->input = devm_input_allocate_device(&pdev->dev);
+	if (!vibrator->input)
+		return -ENOMEM;
+
+	vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(vibrator->vcc)) {
+		if (PTR_ERR(vibrator->vcc) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get regulator: %ld\n",
+				PTR_ERR(vibrator->vcc));
+		return PTR_ERR(vibrator->vcc);
+	}
+
+	vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+	if (IS_ERR(vibrator->enable_gpio)) {
+		if (PTR_ERR(vibrator->enable_gpio) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get enable gpio: %ld\n",
+				PTR_ERR(vibrator->enable_gpio));
+		return PTR_ERR(vibrator->enable_gpio);
+	}
+
+	vibrator->clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(vibrator->clk)) {
+		if (PTR_ERR(vibrator->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to lookup pwm clock: %ld\n",
+				PTR_ERR(vibrator->clk));
+		return PTR_ERR(vibrator->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENODEV;
+	}
+
+	vibrator->base = devm_ioremap(&pdev->dev, res->start,
+				     resource_size(res));
+	if (!vibrator->base) {
+		dev_err(&pdev->dev, "Failed to iomap resource.\n");
+		return -ENOMEM;
+	}
+
+	vibrator->enabled = false;
+	mutex_init(&vibrator->mutex);
+	INIT_WORK(&vibrator->worker, msm_vibrator_worker);
+
+	vibrator->input->name = "msm-vibrator";
+	vibrator->input->id.bustype = BUS_HOST;
+	vibrator->input->close = msm_vibrator_close;
+
+	input_set_drvdata(vibrator->input, vibrator);
+	input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
+
+	ret = input_ff_create_memless(vibrator->input, NULL,
+				      msm_vibrator_play_effect);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create ff memless: %d", ret);
+		return ret;
+	}
+
+	ret = input_register_device(vibrator->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register input device: %d", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, vibrator);
+
+	return 0;
+}
+
+static int __maybe_unused msm_vibrator_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct msm_vibrator *vibrator = platform_get_drvdata(pdev);
+
+	cancel_work_sync(&vibrator->worker);
+
+	if (vibrator->enabled)
+		msm_vibrator_stop(vibrator);
+
+	return 0;
+}
+
+static int __maybe_unused msm_vibrator_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct msm_vibrator *vibrator = platform_get_drvdata(pdev);
+
+	if (vibrator->enabled)
+		msm_vibrator_start(vibrator);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(msm_vibrator_pm_ops, msm_vibrator_suspend,
+			 msm_vibrator_resume);
+
+static const struct of_device_id msm_vibrator_of_match[] = {
+	{ .compatible = "qcom,msm8226-vibrator" },
+	{ .compatible = "qcom,msm8974-vibrator" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, msm_vibrator_of_match);
+
+static struct platform_driver msm_vibrator_driver = {
+	.probe	= msm_vibrator_probe,
+	.driver	= {
+		.name = "msm-vibrator",
+		.pm = &msm_vibrator_pm_ops,
+		.of_match_table = of_match_ptr(msm_vibrator_of_match),
+	},
+};
+module_platform_driver(msm_vibrator_driver);
+
+MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>");
+MODULE_DESCRIPTION("Qualcomm MSM vibrator driver");
+MODULE_LICENSE("GPL");

drivers/input/misc/soc_button_array.c

@@ -185,6 +185,10 @@ static int soc_button_parse_btn_desc(struct device *dev,
 		info->name = "power";
 		info->event_code = KEY_POWER;
 		info->wakeup = true;
+	} else if (upage == 0x01 && usage == 0xca) {
+		info->name = "rotation lock switch";
+		info->event_type = EV_SW;
+		info->event_code = SW_ROTATE_LOCK;
 	} else if (upage == 0x07 && usage == 0xe3) {
 		info->name = "home";
 		info->event_code = KEY_LEFTMETA;
@@ -373,7 +377,7 @@ static struct soc_button_info soc_button_PNP0C40[] = {
 	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
 	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
 	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
-	{ "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false },
+	{ "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false },
 	{ }
 };
 

drivers/input/mouse/elan_i2c_core.c

@@ -1337,6 +1337,7 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN0000", 0 },
 	{ "ELAN0100", 0 },
 	{ "ELAN0600", 0 },
+	{ "ELAN0601", 0 },
 	{ "ELAN0602", 0 },
 	{ "ELAN0605", 0 },
 	{ "ELAN0608", 0 },

drivers/input/mouse/synaptics_i2c.c

@@ -219,7 +219,6 @@ struct synaptics_i2c {
 	struct i2c_client	*client;
 	struct input_dev	*input;
 	struct delayed_work	dwork;
-	spinlock_t		lock;
 	int			no_data_count;
 	int			no_decel_param;
 	int			reduce_report_param;
@@ -369,23 +368,11 @@ static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
 	return xy_delta || gesture;
 }
 
-static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch,
-					  unsigned long delay)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&touch->lock, flags);
-
-	mod_delayed_work(system_wq, &touch->dwork, delay);
-
-	spin_unlock_irqrestore(&touch->lock, flags);
-}
-
 static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
 {
 	struct synaptics_i2c *touch = dev_id;
 
-	synaptics_i2c_reschedule_work(touch, 0);
+	mod_delayed_work(system_wq, &touch->dwork, 0);
 
 	return IRQ_HANDLED;
 }
@@ -461,7 +448,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work)
 	 * We poll the device once in THREAD_IRQ_SLEEP_SECS and
 	 * if error is detected, we try to reset and reconfigure the touchpad.
 	 */
-	synaptics_i2c_reschedule_work(touch, delay);
+	mod_delayed_work(system_wq, &touch->dwork, delay);
 }
 
 static int synaptics_i2c_open(struct input_dev *input)
@@ -474,7 +461,7 @@ static int synaptics_i2c_open(struct input_dev *input)
 		return ret;
 
 	if (polling_req)
-		synaptics_i2c_reschedule_work(touch,
+		mod_delayed_work(system_wq, &touch->dwork,
 				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
 
 	return 0;
@@ -530,7 +517,6 @@ static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *clien
 	touch->scan_rate_param = scan_rate;
 	set_scan_rate(touch, scan_rate);
 	INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
-	spin_lock_init(&touch->lock);
 
 	return touch;
 }
@@ -637,7 +623,7 @@ static int __maybe_unused synaptics_i2c_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	synaptics_i2c_reschedule_work(touch,
+	mod_delayed_work(system_wq, &touch->dwork,
 				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
 
 	return 0;

drivers/input/serio/i8042-sparcio.h

@@ -53,12 +53,11 @@ static struct resource *kbd_res;
 
 static int sparc_i8042_probe(struct platform_device *op)
 {
-	struct device_node *dp = op->dev.of_node;
+	struct device_node *dp;
 
-	dp = dp->child;
-	while (dp) {
-		if (!strcmp(dp->name, OBP_PS2KBD_NAME1) ||
-		    !strcmp(dp->name, OBP_PS2KBD_NAME2)) {
+	for_each_child_of_node(op->dev.of_node, dp) {
+		if (of_node_name_eq(dp, OBP_PS2KBD_NAME1) ||
+		    of_node_name_eq(dp, OBP_PS2KBD_NAME2)) {
 			struct platform_device *kbd = of_find_device_by_node(dp);
 			unsigned int irq = kbd->archdata.irqs[0];
 			if (irq == 0xffffffff)
@@ -67,16 +66,14 @@ static int sparc_i8042_probe(struct platform_device *op)
 			kbd_iobase = of_ioremap(&kbd->resource[0],
 						0, 8, "kbd");
 			kbd_res = &kbd->resource[0];
-		} else if (!strcmp(dp->name, OBP_PS2MS_NAME1) ||
-			   !strcmp(dp->name, OBP_PS2MS_NAME2)) {
+		} else if (of_node_name_eq(dp, OBP_PS2MS_NAME1) ||
+			   of_node_name_eq(dp, OBP_PS2MS_NAME2)) {
 			struct platform_device *ms = of_find_device_by_node(dp);
 			unsigned int irq = ms->archdata.irqs[0];
 			if (irq == 0xffffffff)
 				irq = op->archdata.irqs[0];
 			i8042_aux_irq = irq;
 		}
-
-		dp = dp->sibling;
 	}
 
 	return 0;
@@ -109,8 +106,9 @@ static struct platform_driver sparc_i8042_driver = {
 static int __init i8042_platform_init(void)
 {
 	struct device_node *root = of_find_node_by_path("/");
+	const char *name = of_get_property(root, "name", NULL);
 
-	if (!strcmp(root->name, "SUNW,JavaStation-1")) {
+	if (name && !strcmp(name, "SUNW,JavaStation-1")) {
 		/* Hardcoded values for MrCoffee.  */
 		i8042_kbd_irq = i8042_aux_irq = 13 | 0x20;
 		kbd_iobase = ioremap(0x71300060, 8);
@@ -139,8 +137,9 @@ static int __init i8042_platform_init(void)
 static inline void i8042_platform_exit(void)
 {
 	struct device_node *root = of_find_node_by_path("/");
+	const char *name = of_get_property(root, "name", NULL);
 
-	if (strcmp(root->name, "SUNW,JavaStation-1"))
+	if (!name || strcmp(name, "SUNW,JavaStation-1"))
 		platform_driver_unregister(&sparc_i8042_driver);
 }
 

drivers/input/tablet/wacom_serial4.c

@@ -187,6 +187,7 @@ enum {
 	MODEL_DIGITIZER_II	= 0x5544, /* UD */
 	MODEL_GRAPHIRE		= 0x4554, /* ET */
 	MODEL_PENPARTNER	= 0x4354, /* CT */
+	MODEL_ARTPAD_II		= 0x4B54, /* KT */
 };
 
 static void wacom_handle_model_response(struct wacom *wacom)
@@ -245,6 +246,7 @@ static void wacom_handle_model_response(struct wacom *wacom)
 		wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
 		break;
 
+	case MODEL_ARTPAD_II:
 	case MODEL_DIGITIZER_II:
 		wacom->dev->name = "Wacom Digitizer II";
 		wacom->dev->id.version = MODEL_DIGITIZER_II;

drivers/input/touchscreen/Kconfig

@@ -699,6 +699,7 @@ config TOUCHSCREEN_EDT_FT5X06
 config TOUCHSCREEN_RASPBERRYPI_FW
 	tristate "Raspberry Pi's firmware base touch screen support"
 	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
+	select INPUT_POLLDEV
 	help
 	  Say Y here if you have the official Raspberry Pi 7 inch screen on
 	  your system.
@@ -1168,11 +1169,11 @@ config TOUCHSCREEN_SIS_I2C
 	  module will be called sis_i2c.
 
 config TOUCHSCREEN_ST1232
-	tristate "Sitronix ST1232 touchscreen controllers"
+	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
 	depends on I2C
 	help
-	  Say Y here if you want to support Sitronix ST1232
-	  touchscreen controller.
+	  Say Y here if you want to support the Sitronix ST1232
+	  or ST1633 touchscreen controller.
 
 	  If unsure, say N.
 

drivers/input/touchscreen/ad7879.c

@@ -246,11 +246,14 @@ static void ad7879_timer(struct timer_list *t)
 static irqreturn_t ad7879_irq(int irq, void *handle)
 {
 	struct ad7879 *ts = handle;
+	int error;
 
-	regmap_bulk_read(ts->regmap, AD7879_REG_XPLUS,
+	error = regmap_bulk_read(ts->regmap, AD7879_REG_XPLUS,
 				 ts->conversion_data, AD7879_NR_SENSE);
-
-	if (!ad7879_report(ts))
+	if (error)
+		dev_err_ratelimited(ts->dev, "failed to read %#02x: %d\n",
+				    AD7879_REG_XPLUS, error);
+	else if (!ad7879_report(ts))
 		mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
 
 	return IRQ_HANDLED;

drivers/input/touchscreen/edt-ft5x06.c

@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/kernel.h>
 #include <linux/uaccess.h>
 #include <linux/delay.h>
 #include <linux/debugfs.h>
@@ -53,6 +54,11 @@
 #define M09_REGISTER_NUM_X		0x94
 #define M09_REGISTER_NUM_Y		0x95
 
+#define EV_REGISTER_THRESHOLD		0x40
+#define EV_REGISTER_GAIN		0x41
+#define EV_REGISTER_OFFSET_Y		0x45
+#define EV_REGISTER_OFFSET_X		0x46
+
 #define NO_REGISTER			0xff
 
 #define WORK_REGISTER_OPMODE		0x3c
@@ -73,6 +79,7 @@ enum edt_ver {
 	EDT_M06,
 	EDT_M09,
 	EDT_M12,
+	EV_FT,
 	GENERIC_FT,
 };
 
@@ -81,6 +88,8 @@ struct edt_reg_addr {
 	int reg_report_rate;
 	int reg_gain;
 	int reg_offset;
+	int reg_offset_x;
+	int reg_offset_y;
 	int reg_num_x;
 	int reg_num_y;
 };
@@ -106,6 +115,8 @@ struct edt_ft5x06_ts_data {
 	int threshold;
 	int gain;
 	int offset;
+	int offset_x;
+	int offset_y;
 	int report_rate;
 	int max_support_points;
 
@@ -190,6 +201,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 
 	case EDT_M09:
 	case EDT_M12:
+	case EV_FT:
 	case GENERIC_FT:
 		cmd = 0x0;
 		offset = 3;
@@ -242,6 +254,10 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 
 		x = ((buf[0] << 8) | buf[1]) & 0x0fff;
 		y = ((buf[2] << 8) | buf[3]) & 0x0fff;
+		/* The FT5x26 send the y coordinate first */
+		if (tsdata->version == EV_FT)
+			swap(x, y);
+
 		id = (buf[2] >> 4) & 0x0f;
 		down = type != TOUCH_EVENT_UP;
 
@@ -275,8 +291,10 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
 		wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
 		return edt_ft5x06_ts_readwrite(tsdata->client, 4,
 					wrbuf, 0, NULL);
+	/* fallthrough */
 	case EDT_M09:
 	case EDT_M12:
+	case EV_FT:
 	case GENERIC_FT:
 		wrbuf[0] = addr;
 		wrbuf[1] = value;
@@ -315,8 +333,10 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
 		}
 		break;
 
+	/* fallthrough */
 	case EDT_M09:
 	case EDT_M12:
+	case EV_FT:
 	case GENERIC_FT:
 		wrbuf[0] = addr;
 		error = edt_ft5x06_ts_readwrite(tsdata->client, 1,
@@ -339,9 +359,10 @@ struct edt_ft5x06_attribute {
 	u8 limit_high;
 	u8 addr_m06;
 	u8 addr_m09;
+	u8 addr_ev;
 };
 
-#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09,			\
+#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, _addr_ev,		\
 		_limit_low, _limit_high)				\
 	struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = {	\
 		.dattr = __ATTR(_field, _mode,				\
@@ -350,6 +371,7 @@ struct edt_ft5x06_attribute {
 		.field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \
 		.addr_m06 = _addr_m06,					\
 		.addr_m09 = _addr_m09,					\
+		.addr_ev  = _addr_ev,					\
 		.limit_low = _limit_low,				\
 		.limit_high = _limit_high,				\
 	}
@@ -386,6 +408,10 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev,
 		addr = attr->addr_m09;
 		break;
 
+	case EV_FT:
+		addr = attr->addr_ev;
+		break;
+
 	default:
 		error = -ENODEV;
 		goto out;
@@ -457,6 +483,10 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev,
 		addr = attr->addr_m09;
 		break;
 
+	case EV_FT:
+		addr = attr->addr_ev;
+		break;
+
 	default:
 		error = -ENODEV;
 		goto out;
@@ -480,20 +510,28 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev,
 
 /* m06, m09: range 0-31, m12: range 0-5 */
 static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
-		M09_REGISTER_GAIN, 0, 31);
+		M09_REGISTER_GAIN, EV_REGISTER_GAIN, 0, 31);
 /* m06, m09: range 0-31, m12: range 0-16 */
 static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
-		M09_REGISTER_OFFSET, 0, 31);
+		M09_REGISTER_OFFSET, NO_REGISTER, 0, 31);
+/* m06, m09, m12: no supported, ev_ft: range 0-80 */
+static EDT_ATTR(offset_x, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
+		EV_REGISTER_OFFSET_X, 0, 80);
+/* m06, m09, m12: no supported, ev_ft: range 0-80 */
+static EDT_ATTR(offset_y, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
+		EV_REGISTER_OFFSET_Y, 0, 80);
 /* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */
 static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
-		M09_REGISTER_THRESHOLD, 0, 255);
+		M09_REGISTER_THRESHOLD, EV_REGISTER_THRESHOLD, 0, 255);
 /* m06: range 3 to 14, m12: (0x64: 100Hz) */
 static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
-		NO_REGISTER, 0, 255);
+		NO_REGISTER, NO_REGISTER, 0, 255);
 
 static struct attribute *edt_ft5x06_attrs[] = {
 	&edt_ft5x06_attr_gain.dattr.attr,
 	&edt_ft5x06_attr_offset.dattr.attr,
+	&edt_ft5x06_attr_offset_x.dattr.attr,
+	&edt_ft5x06_attr_offset_y.dattr.attr,
 	&edt_ft5x06_attr_threshold.dattr.attr,
 	&edt_ft5x06_attr_report_rate.dattr.attr,
 	NULL
@@ -605,8 +643,15 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
 				  tsdata->threshold);
 	edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
 				  tsdata->gain);
+	if (reg_addr->reg_offset != NO_REGISTER)
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
 					  tsdata->offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
+					  tsdata->offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
+					  tsdata->offset_y);
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
 				  tsdata->report_rate);
@@ -867,6 +912,16 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
 		case 0x5a:   /* Solomon Goldentek Display */
 			snprintf(model_name, EDT_NAME_LEN, "GKTW50SCED1R0");
 			break;
+		case 0x59:  /* Evervision Display with FT5xx6 TS */
+			tsdata->version = EV_FT;
+			error = edt_ft5x06_ts_readwrite(client, 1, "\x53",
+							1, rdbuf);
+			if (error)
+				return error;
+			strlcpy(fw_version, rdbuf, 1);
+			snprintf(model_name, EDT_NAME_LEN,
+				 "EVERVISION-FT5726NEi");
+			break;
 		default:
 			snprintf(model_name, EDT_NAME_LEN,
 				 "generic ft5x06 (%02x)",
@@ -902,6 +957,18 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val);
 		tsdata->offset = val;
 	}
+
+	error = device_property_read_u32(dev, "offset-x", &val);
+	if (!error) {
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val);
+		tsdata->offset_x = val;
+	}
+
+	error = device_property_read_u32(dev, "offset-y", &val);
+	if (!error) {
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val);
+		tsdata->offset_y = val;
+	}
 }
 
 static void
@@ -912,7 +979,15 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
 	tsdata->threshold = edt_ft5x06_register_read(tsdata,
 						     reg_addr->reg_threshold);
 	tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain);
-	tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
+	if (reg_addr->reg_offset != NO_REGISTER)
+		tsdata->offset =
+			edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		tsdata->offset_x = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		tsdata->offset_y = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_offset_y);
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
 						reg_addr->reg_report_rate);
@@ -940,6 +1015,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE;
 		reg_addr->reg_gain = WORK_REGISTER_GAIN;
 		reg_addr->reg_offset = WORK_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
 		reg_addr->reg_num_x = WORK_REGISTER_NUM_X;
 		reg_addr->reg_num_y = WORK_REGISTER_NUM_Y;
 		break;
@@ -950,15 +1027,30 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_report_rate = NO_REGISTER;
 		reg_addr->reg_gain = M09_REGISTER_GAIN;
 		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
 		reg_addr->reg_num_x = M09_REGISTER_NUM_X;
 		reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
 		break;
 
+	case EV_FT:
+		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
+		reg_addr->reg_gain = EV_REGISTER_GAIN;
+		reg_addr->reg_offset = NO_REGISTER;
+		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
+		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
+		reg_addr->reg_num_x = NO_REGISTER;
+		reg_addr->reg_num_y = NO_REGISTER;
+		reg_addr->reg_report_rate = NO_REGISTER;
+		break;
+
 	case GENERIC_FT:
 		/* this is a guesswork */
 		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
 		reg_addr->reg_gain = M09_REGISTER_GAIN;
 		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
 		break;
 	}
 }
@@ -1155,6 +1247,7 @@ static const struct edt_i2c_chip_data edt_ft6236_data = {
 static const struct i2c_device_id edt_ft5x06_ts_id[] = {
 	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
 	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
+	{ .name = "ev-ft5726", .driver_data = (long)&edt_ft5506_data },
 	/* Note no edt- prefix for compatibility with the ft6236.c driver */
 	{ .name = "ft6236", .driver_data = (long)&edt_ft6236_data },
 	{ /* sentinel */ }
@@ -1167,6 +1260,7 @@ static const struct of_device_id edt_ft5x06_of_match[] = {
 	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
+	{ .compatible = "evervision,ev-ft5726", .data = &edt_ft5506_data },
 	/* Note focaltech vendor prefix for compatibility with ft6236.c */
 	{ .compatible = "focaltech,ft6236", .data = &edt_ft6236_data },
 	{ /* sentinel */ }

drivers/input/touchscreen/goodix.c

@@ -216,6 +216,7 @@ static const struct goodix_chip_data *goodix_get_chip_data(u16 id)
 {
 	switch (id) {
 	case 1151:
+	case 5688:
 		return &gt1x_chip_data;
 
 	case 911:
@@ -692,7 +693,9 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
 	touchscreen_parse_properties(ts->input_dev, true, &ts->prop);
 
 	if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) {
-		dev_err(&ts->client->dev, "Invalid config, using defaults\n");
+		dev_err(&ts->client->dev,
+			"Invalid config (%d, %d, %d), using defaults\n",
+			ts->prop.max_x, ts->prop.max_y, ts->max_touch_num);
 		ts->prop.max_x = GOODIX_MAX_WIDTH - 1;
 		ts->prop.max_y = GOODIX_MAX_HEIGHT - 1;
 		ts->max_touch_num = GOODIX_MAX_CONTACTS;
@@ -942,6 +945,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
 #ifdef CONFIG_OF
 static const struct of_device_id goodix_of_match[] = {
 	{ .compatible = "goodix,gt1151" },
+	{ .compatible = "goodix,gt5688" },
 	{ .compatible = "goodix,gt911" },
 	{ .compatible = "goodix,gt9110" },
 	{ .compatible = "goodix,gt912" },

drivers/input/touchscreen/st1232.c

@@ -11,25 +11,19 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/input/touchscreen.h>
 
 #define ST1232_TS_NAME	"st1232-ts"
-
-#define MIN_X		0x00
-#define MIN_Y		0x00
-#define MAX_X		0x31f	/* (800 - 1) */
-#define MAX_Y		0x1df	/* (480 - 1) */
-#define MAX_AREA	0xff
-#define MAX_FINGERS	2
+#define ST1633_TS_NAME	"st1633-ts"
 
 struct st1232_ts_finger {
 	u16 x;
@@ -38,12 +32,25 @@ struct st1232_ts_finger {
 	bool is_valid;
 };
 
+struct st_chip_info {
+	bool	have_z;
+	u16	max_x;
+	u16	max_y;
+	u16	max_area;
+	u16	max_fingers;
+	u8	start_reg;
+};
+
 struct st1232_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
-	struct st1232_ts_finger finger[MAX_FINGERS];
+	struct touchscreen_properties prop;
 	struct dev_pm_qos_request low_latency_req;
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
+	const struct st_chip_info *chip_info;
+	int read_buf_len;
+	u8 *read_buf;
+	struct st1232_ts_finger *finger;
 };
 
 static int st1232_ts_read_data(struct st1232_ts_data *ts)
@@ -52,40 +59,35 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts)
 	struct i2c_client *client = ts->client;
 	struct i2c_msg msg[2];
 	int error;
-	u8 start_reg;
-	u8 buf[10];
+	int i, y;
+	u8 start_reg = ts->chip_info->start_reg;
+	u8 *buf = ts->read_buf;
 
-	/* read touchscreen data from ST1232 */
+	/* read touchscreen data */
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 1;
 	msg[0].buf = &start_reg;
-	start_reg = 0x10;
 
 	msg[1].addr = ts->client->addr;
 	msg[1].flags = I2C_M_RD;
-	msg[1].len = sizeof(buf);
+	msg[1].len = ts->read_buf_len;
 	msg[1].buf = buf;
 
 	error = i2c_transfer(client->adapter, msg, 2);
 	if (error < 0)
 		return error;
 
-	/* get "valid" bits */
-	finger[0].is_valid = buf[2] >> 7;
-	finger[1].is_valid = buf[5] >> 7;
+	for (i = 0, y = 0; i < ts->chip_info->max_fingers; i++, y += 3) {
+		finger[i].is_valid = buf[i + y] >> 7;
+		if (finger[i].is_valid) {
+			finger[i].x = ((buf[i + y] & 0x0070) << 4) | buf[i + 1];
+			finger[i].y = ((buf[i + y] & 0x0007) << 8) | buf[i + 2];
 
-	/* get xy coordinate */
-	if (finger[0].is_valid) {
-		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
-		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
-		finger[0].t = buf[8];
+			/* st1232 includes a z-axis / touch strength */
+			if (ts->chip_info->have_z)
+				finger[i].t = buf[i + 6];
 		}
-
-	if (finger[1].is_valid) {
-		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
-		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
-		finger[1].t = buf[9];
 	}
 
 	return 0;
@@ -104,13 +106,16 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 		goto end;
 
 	/* multi touch protocol */
-	for (i = 0; i < MAX_FINGERS; i++) {
+	for (i = 0; i < ts->chip_info->max_fingers; i++) {
 		if (!finger[i].is_valid)
 			continue;
 
-		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
-		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
-		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
+		if (ts->chip_info->have_z)
+			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+					 finger[i].t);
+
+		touchscreen_report_pos(input_dev, &ts->prop,
+					finger[i].x, finger[i].y, true);
 		input_mt_sync(input_dev);
 		count++;
 	}
@@ -138,17 +143,45 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 
 static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
 {
-	if (gpio_is_valid(ts->reset_gpio))
-		gpio_direction_output(ts->reset_gpio, poweron);
+	if (ts->reset_gpio)
+		gpiod_set_value_cansleep(ts->reset_gpio, !poweron);
 }
 
+static const struct st_chip_info st1232_chip_info = {
+	.have_z		= true,
+	.max_x		= 0x31f, /* 800 - 1 */
+	.max_y		= 0x1df, /* 480 -1 */
+	.max_area	= 0xff,
+	.max_fingers	= 2,
+	.start_reg	= 0x12,
+};
+
+static const struct st_chip_info st1633_chip_info = {
+	.have_z		= false,
+	.max_x		= 0x13f, /* 320 - 1 */
+	.max_y		= 0x1df, /* 480 -1 */
+	.max_area	= 0x00,
+	.max_fingers	= 5,
+	.start_reg	= 0x12,
+};
+
 static int st1232_ts_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	const struct st_chip_info *match;
 	struct st1232_ts_data *ts;
+	struct st1232_ts_finger *finger;
 	struct input_dev *input_dev;
 	int error;
 
+	match = device_get_match_data(&client->dev);
+	if (!match && id)
+		match = (const void *)id->driver_data;
+	if (!match) {
+		dev_err(&client->dev, "unknown device model\n");
+		return -ENODEV;
+	}
+
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
 		return -EIO;
@@ -163,6 +196,19 @@ static int st1232_ts_probe(struct i2c_client *client,
 	if (!ts)
 		return -ENOMEM;
 
+	ts->chip_info = match;
+	ts->finger = devm_kcalloc(&client->dev,
+				  ts->chip_info->max_fingers, sizeof(*finger),
+				  GFP_KERNEL);
+	if (!ts->finger)
+		return -ENOMEM;
+
+	/* allocate a buffer according to the number of registers to read */
+	ts->read_buf_len = ts->chip_info->max_fingers * 4;
+	ts->read_buf = devm_kzalloc(&client->dev, ts->read_buf_len, GFP_KERNEL);
+	if (!ts->read_buf)
+		return -ENOMEM;
+
 	input_dev = devm_input_allocate_device(&client->dev);
 	if (!input_dev)
 		return -ENOMEM;
@@ -170,16 +216,14 @@ static int st1232_ts_probe(struct i2c_client *client,
 	ts->client = client;
 	ts->input_dev = input_dev;
 
-	ts->reset_gpio = of_get_gpio(client->dev.of_node, 0);
-	if (gpio_is_valid(ts->reset_gpio)) {
-		error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL);
-		if (error) {
-			dev_err(&client->dev,
-				"Unable to request GPIO pin %d.\n",
-				ts->reset_gpio);
+	ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL,
+						 GPIOD_OUT_HIGH);
+	if (IS_ERR(ts->reset_gpio)) {
+		error = PTR_ERR(ts->reset_gpio);
+		dev_err(&client->dev, "Unable to request GPIO pin: %d.\n",
+			error);
 		return error;
 	}
-	}
 
 	st1232_ts_power(ts, true);
 
@@ -192,9 +236,16 @@ static int st1232_ts_probe(struct i2c_client *client,
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(EV_ABS, input_dev->evbit);
 
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+	if (ts->chip_info->have_z)
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+				     ts->chip_info->max_area, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, ts->chip_info->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, ts->chip_info->max_y, 0, 0);
+
+	touchscreen_parse_properties(input_dev, true, &ts->prop);
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  NULL, st1232_ts_irq_handler,
@@ -261,13 +312,15 @@ static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
 			 st1232_ts_suspend, st1232_ts_resume);
 
 static const struct i2c_device_id st1232_ts_id[] = {
-	{ ST1232_TS_NAME, 0 },
+	{ ST1232_TS_NAME, (unsigned long)&st1232_chip_info },
+	{ ST1633_TS_NAME, (unsigned long)&st1633_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
 
 static const struct of_device_id st1232_ts_dt_ids[] = {
-	{ .compatible = "sitronix,st1232", },
+	{ .compatible = "sitronix,st1232", .data = &st1232_chip_info },
+	{ .compatible = "sitronix,st1633", .data = &st1633_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
@@ -286,5 +339,6 @@ static struct i2c_driver st1232_ts_driver = {
 module_i2c_driver(st1232_ts_driver);
 
 MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
+MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@ginzinger.com>");
 MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
 MODULE_LICENSE("GPL v2");

drivers/input/touchscreen/stmfts.c

@@ -106,27 +106,29 @@ struct stmfts_data {
 	bool running;
 };
 
-static void stmfts_brightness_set(struct led_classdev *led_cdev,
+static int stmfts_brightness_set(struct led_classdev *led_cdev,
 					enum led_brightness value)
 {
 	struct stmfts_data *sdata = container_of(led_cdev,
 					struct stmfts_data, led_cdev);
 	int err;
 
-	if (value == sdata->led_status || !sdata->ledvdd)
-		return;
-
+	if (value != sdata->led_status && sdata->ledvdd) {
 		if (!value) {
 			regulator_disable(sdata->ledvdd);
 		} else {
 			err = regulator_enable(sdata->ledvdd);
-		if (err)
+			if (err) {
 				dev_warn(&sdata->client->dev,
 					 "failed to disable ledvdd regulator: %d\n",
 					 err);
+				return err;
+			}
 		}
-
 		sdata->led_status = value;
+	}
+
+	return 0;
 }
 
 static enum led_brightness stmfts_brightness_get(struct led_classdev *led_cdev)
@@ -608,7 +610,7 @@ static int stmfts_enable_led(struct stmfts_data *sdata)
 	sdata->led_cdev.name = STMFTS_DEV_NAME;
 	sdata->led_cdev.max_brightness = LED_ON;
 	sdata->led_cdev.brightness = LED_OFF;
-	sdata->led_cdev.brightness_set = stmfts_brightness_set;
+	sdata->led_cdev.brightness_set_blocking = stmfts_brightness_set;
 	sdata->led_cdev.brightness_get = stmfts_brightness_get;
 
 	err = devm_led_classdev_register(&sdata->client->dev, &sdata->led_cdev);

drivers/input/touchscreen/sx8654.c

@@ -27,12 +27,16 @@
  *  published by the Free Software Foundation.
  */
 
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
 
 /* register addresses */
 #define I2C_REG_TOUCH0			0x00
@@ -42,25 +46,28 @@
 #define I2C_REG_IRQSRC			0x23
 #define I2C_REG_SOFTRESET		0x3f
 
+#define I2C_REG_SX8650_STAT		0x05
+#define SX8650_STAT_CONVIRQ		BIT(7)
+
 /* commands */
 #define CMD_READ_REGISTER		0x40
-#define CMD_MANUAL			0xc0
 #define CMD_PENTRG			0xe0
 
 /* value for I2C_REG_SOFTRESET */
 #define SOFTRESET_VALUE			0xde
 
 /* bits for I2C_REG_IRQSRC */
-#define IRQ_PENTOUCH_TOUCHCONVDONE	0x08
-#define IRQ_PENRELEASE			0x04
+#define IRQ_PENTOUCH_TOUCHCONVDONE	BIT(3)
+#define IRQ_PENRELEASE			BIT(2)
 
 /* bits for RegTouch1 */
 #define CONDIRQ				0x20
+#define RPDNT_100K			0x00
 #define FILT_7SA			0x03
 
 /* bits for I2C_REG_CHANMASK */
-#define CONV_X				0x80
-#define CONV_Y				0x40
+#define CONV_X				BIT(7)
+#define CONV_Y				BIT(6)
 
 /* coordinates rate: higher nibble of CTRL0 register */
 #define RATE_MANUAL			0x00
@@ -69,13 +76,122 @@
 /* power delay: lower nibble of CTRL0 register */
 #define POWDLY_1_1MS			0x0b
 
+/* for sx8650, as we have no pen release IRQ there: timeout in ns following the
+ * last PENIRQ after which we assume the pen is lifted.
+ */
+#define SX8650_PENIRQ_TIMEOUT		msecs_to_jiffies(10)
+
 #define MAX_12BIT			((1 << 12) - 1)
+#define MAX_I2C_READ_LEN		10 /* see datasheet section 5.1.5 */
+
+/* channel definition */
+#define CH_X				0x00
+#define CH_Y				0x01
+
+struct sx865x_data {
+	u8 cmd_manual;
+	u8 chan_mask;
+	bool has_irq_penrelease;
+	bool has_reg_irqmask;
+	irq_handler_t irqh;
+};
 
 struct sx8654 {
 	struct input_dev *input;
 	struct i2c_client *client;
+	struct gpio_desc *gpio_reset;
+
+	spinlock_t lock;	/* for input reporting from irq/timer */
+	struct timer_list timer;
+
+	struct touchscreen_properties props;
+
+	const struct sx865x_data *data;
 };
 
+static inline void sx865x_penrelease(struct sx8654 *ts)
+{
+	struct input_dev *input_dev = ts->input;
+
+	input_report_key(input_dev, BTN_TOUCH, 0);
+	input_sync(input_dev);
+}
+
+static void sx865x_penrelease_timer_handler(struct timer_list *t)
+{
+	struct sx8654 *ts = from_timer(ts, t, timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ts->lock, flags);
+	sx865x_penrelease(ts);
+	spin_unlock_irqrestore(&ts->lock, flags);
+	dev_dbg(&ts->client->dev, "penrelease by timer\n");
+}
+
+static irqreturn_t sx8650_irq(int irq, void *handle)
+{
+	struct sx8654 *ts = handle;
+	struct device *dev = &ts->client->dev;
+	int len, i;
+	unsigned long flags;
+	u8 stat;
+	u16 x, y;
+	u16 ch;
+	u16 chdata;
+	__be16 data[MAX_I2C_READ_LEN / sizeof(__be16)];
+	u8 nchan = hweight32(ts->data->chan_mask);
+	u8 readlen = nchan * sizeof(*data);
+
+	stat = i2c_smbus_read_byte_data(ts->client, CMD_READ_REGISTER
+						    | I2C_REG_SX8650_STAT);
+
+	if (!(stat & SX8650_STAT_CONVIRQ)) {
+		dev_dbg(dev, "%s ignore stat [0x%02x]", __func__, stat);
+		return IRQ_HANDLED;
+	}
+
+	len = i2c_master_recv(ts->client, (u8 *)data, readlen);
+	if (len != readlen) {
+		dev_dbg(dev, "ignore short recv (%d)\n", len);
+		return IRQ_HANDLED;
+	}
+
+	spin_lock_irqsave(&ts->lock, flags);
+
+	x = 0;
+	y = 0;
+	for (i = 0; i < nchan; i++) {
+		chdata = be16_to_cpu(data[i]);
+
+		if (unlikely(chdata == 0xFFFF)) {
+			dev_dbg(dev, "invalid qualified data @ %d\n", i);
+			continue;
+		} else if (unlikely(chdata & 0x8000)) {
+			dev_warn(dev, "hibit @ %d [0x%04x]\n", i, chdata);
+			continue;
+		}
+
+		ch = chdata >> 12;
+		if (ch == CH_X)
+			x = chdata & MAX_12BIT;
+		else if (ch == CH_Y)
+			y = chdata & MAX_12BIT;
+		else
+			dev_warn(dev, "unknown channel %d [0x%04x]\n", ch,
+				 chdata);
+	}
+
+	touchscreen_report_pos(ts->input, &ts->props, x, y, false);
+	input_report_key(ts->input, BTN_TOUCH, 1);
+	input_sync(ts->input);
+	dev_dbg(dev, "point(%4d,%4d)\n", x, y);
+
+	mod_timer(&ts->timer, jiffies + SX8650_PENIRQ_TIMEOUT);
+	spin_unlock_irqrestore(&ts->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t sx8654_irq(int irq, void *handle)
 {
 	struct sx8654 *sx8654 = handle;
@@ -112,8 +228,8 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
 		x = ((data[0] & 0xf) << 8) | (data[1]);
 		y = ((data[2] & 0xf) << 8) | (data[3]);
 
-		input_report_abs(sx8654->input, ABS_X, x);
-		input_report_abs(sx8654->input, ABS_Y, y);
+		touchscreen_report_pos(sx8654->input, &sx8654->props, x, y,
+				       false);
 		input_report_key(sx8654->input, BTN_TOUCH, 1);
 		input_sync(sx8654->input);
 
@@ -124,6 +240,25 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
 	return IRQ_HANDLED;
 }
 
+static int sx8654_reset(struct sx8654 *ts)
+{
+	int err;
+
+	if (ts->gpio_reset) {
+		gpiod_set_value_cansleep(ts->gpio_reset, 1);
+		udelay(2); /* Tpulse > 1µs */
+		gpiod_set_value_cansleep(ts->gpio_reset, 0);
+	} else {
+		dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n");
+		err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET,
+						SOFTRESET_VALUE);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 static int sx8654_open(struct input_dev *dev)
 {
 	struct sx8654 *sx8654 = input_get_drvdata(dev);
@@ -157,14 +292,17 @@ static void sx8654_close(struct input_dev *dev)
 
 	disable_irq(client->irq);
 
+	if (!sx8654->data->has_irq_penrelease)
+		del_timer_sync(&sx8654->timer);
+
 	/* enable manual mode mode */
-	error = i2c_smbus_write_byte(client, CMD_MANUAL);
+	error = i2c_smbus_write_byte(client, sx8654->data->cmd_manual);
 	if (error) {
 		dev_err(&client->dev, "writing command CMD_MANUAL failed");
 		return;
 	}
 
-	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, RATE_MANUAL);
 	if (error) {
 		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
 		return;
@@ -186,6 +324,31 @@ static int sx8654_probe(struct i2c_client *client,
 	if (!sx8654)
 		return -ENOMEM;
 
+	sx8654->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(sx8654->gpio_reset)) {
+		error = PTR_ERR(sx8654->gpio_reset);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev, "unable to get reset-gpio: %d\n",
+				error);
+		return error;
+	}
+	dev_dbg(&client->dev, "got GPIO reset pin\n");
+
+	sx8654->data = device_get_match_data(&client->dev);
+	if (!sx8654->data)
+		sx8654->data = (const struct sx865x_data *)id->driver_data;
+	if (!sx8654->data) {
+		dev_err(&client->dev, "invalid or missing device data\n");
+		return -EINVAL;
+	}
+
+	if (!sx8654->data->has_irq_penrelease) {
+		dev_dbg(&client->dev, "use timer for penrelease\n");
+		timer_setup(&sx8654->timer, sx865x_penrelease_timer_handler, 0);
+		spin_lock_init(&sx8654->lock);
+	}
+
 	input = devm_input_allocate_device(&client->dev);
 	if (!input)
 		return -ENOMEM;
@@ -201,43 +364,46 @@ static int sx8654_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
 	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
 
+	touchscreen_parse_properties(input, false, &sx8654->props);
+
 	sx8654->client = client;
 	sx8654->input = input;
 
 	input_set_drvdata(sx8654->input, sx8654);
 
-	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
-					  SOFTRESET_VALUE);
+	error = sx8654_reset(sx8654);
 	if (error) {
-		dev_err(&client->dev, "writing softreset value failed");
+		dev_err(&client->dev, "reset failed");
 		return error;
 	}
 
 	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
-					  CONV_X | CONV_Y);
+					  sx8654->data->chan_mask);
 	if (error) {
 		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
 		return error;
 	}
 
+	if (sx8654->data->has_reg_irqmask) {
 		error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
 						  IRQ_PENTOUCH_TOUCHCONVDONE |
 							IRQ_PENRELEASE);
 		if (error) {
-		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
+			dev_err(&client->dev, "writing I2C_REG_IRQMASK failed");
 			return error;
 		}
+	}
 
 	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
-					  CONDIRQ | FILT_7SA);
+					  CONDIRQ | RPDNT_100K | FILT_7SA);
 	if (error) {
 		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
 		return error;
 	}
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
-					  NULL, sx8654_irq,
-					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  NULL, sx8654->data->irqh,
+					  IRQF_ONESHOT,
 					  client->name, sx8654);
 	if (error) {
 		dev_err(&client->dev,
@@ -256,17 +422,48 @@ static int sx8654_probe(struct i2c_client *client,
 	return 0;
 }
 
+static const struct sx865x_data sx8650_data = {
+	.cmd_manual		= 0xb0,
+	.has_irq_penrelease	= false,
+	.has_reg_irqmask	= false,
+	.chan_mask		= (CONV_X | CONV_Y),
+	.irqh			= sx8650_irq,
+};
+
+static const struct sx865x_data sx8654_data = {
+	.cmd_manual		= 0xc0,
+	.has_irq_penrelease	= true,
+	.has_reg_irqmask	= true,
+	.chan_mask		= (CONV_X | CONV_Y),
+	.irqh			= sx8654_irq,
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id sx8654_of_match[] = {
-	{ .compatible = "semtech,sx8654", },
-	{ },
+	{
+		.compatible = "semtech,sx8650",
+		.data = &sx8650_data,
+	}, {
+		.compatible = "semtech,sx8654",
+		.data = &sx8654_data,
+	}, {
+		.compatible = "semtech,sx8655",
+		.data = &sx8654_data,
+	}, {
+		.compatible = "semtech,sx8656",
+		.data = &sx8654_data,
+	},
+	{ }
 };
 MODULE_DEVICE_TABLE(of, sx8654_of_match);
 #endif
 
 static const struct i2c_device_id sx8654_id_table[] = {
-	{ "semtech_sx8654", 0 },
-	{ },
+	{ .name = "semtech_sx8650", .driver_data = (long)&sx8650_data },
+	{ .name = "semtech_sx8654", .driver_data = (long)&sx8654_data },
+	{ .name = "semtech_sx8655", .driver_data = (long)&sx8654_data },
+	{ .name = "semtech_sx8656", .driver_data = (long)&sx8654_data },
+	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
 

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -507,10 +507,8 @@ static int titsc_remove(struct platform_device *pdev)
 static int __maybe_unused titsc_suspend(struct device *dev)
 {
 	struct titsc *ts_dev = dev_get_drvdata(dev);
-	struct ti_tscadc_dev *tscadc_dev;
 	unsigned int idle;
 
-	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
 	if (device_may_wakeup(dev)) {
 		titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 		idle = titsc_readl(ts_dev, REG_IRQENABLE);
@@ -524,9 +522,7 @@ static int __maybe_unused titsc_suspend(struct device *dev)
 static int __maybe_unused titsc_resume(struct device *dev)
 {
 	struct titsc *ts_dev = dev_get_drvdata(dev);
-	struct ti_tscadc_dev *tscadc_dev;
 
-	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
 	if (device_may_wakeup(dev)) {
 		titsc_writel(ts_dev, REG_IRQWAKEUP,
 				0x00);

include/linux/input/ili210x.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ILI210X_H
-#define _ILI210X_H
-
-struct ili210x_platform_data {
-	unsigned long irq_flags;
-	unsigned int poll_period;
-	bool (*get_pendown_state)(void);
-};
-
-#endif