Commit 4f59ebed authored by Seungwon Jeon's avatar Seungwon Jeon Committed by Kukjin Kim

ARM: dts: Add HS400 support for exynos5420 and exynos5800

HS400 timing values are added for SMDK5420, exynos5420-peach-pit
and exynos5800-peach-pi boards. This also adds RCLK GPIO line,
this gpio should be in pull-down state.
This also enables HS400 on peach-pi and this updates the clock
frequency to 800MHz to be set as input clock to controller.
Signed-off-by: default avatarSeungwon Jeon <tgih.jun@samsung.com>
[alim.akhtar@samsung.com: addressed review comments]
Signed-off-by: default avatarAlim Akhtar <alim.akhtar@samsung.com>
Acked-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene@kernel.org>
parent fa87bd43
......@@ -699,8 +699,10 @@ &mmc_0 {
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
bus-width = <8>;
};
......
......@@ -201,6 +201,13 @@ sd1_clk: sd1-clk {
samsung,pin-drv = <3>;
};
sd0_rclk: sd0-rclk {
samsung,pins = "gpc0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpc1-1";
samsung,pin-function = <2>;
......
......@@ -80,8 +80,11 @@ mmc@12200000 {
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
&sd0_rclk>;
bus-width = <8>;
cap-mmc-highspeed;
};
......
......@@ -654,15 +654,18 @@ &mmc_0 {
num-slots = <1>;
broken-cd;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
clock-frequency = <400000000>;
clock-frequency = <800000000>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
bus-width = <8>;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment