Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fw-ohci: shut up false compiler warning on PPC32
  firewire: fw-ohci: use dma_alloc_coherent for ar_buffer
  ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)
  firewire: fw-sbp2: fix for SYM13FW500 bridge (Datafab disk)
  firewire: update Kconfig help text
  firewire: warn on fatal condition in topology code
  firewire: fw-sbp2: set single-phase retry_limit
  firewire: fw-ohci: Apple UniNorth 1st generation support
  firewire: fw-ohci: PPC PMac platform code
  firewire: endianess annotations
  firewire: endianess fix

drivers/firewire/Kconfig

-# -*- shell-script -*-
-
 comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
 	depends on EXPERIMENTAL=n
 
@@ -21,27 +19,7 @@ config FIREWIRE
           NOTE:
 
 	  You should only build ONE of the stacks, unless you REALLY know what
-	  you are doing.  If you install both, you should configure them only as
-	  modules rather than link them statically, and you should blacklist one
-	  of the concurrent low-level drivers in /etc/modprobe.conf.  Add either
-
-	      blacklist firewire-ohci
-	  or
-	      blacklist ohci1394
-
-	  there depending on which driver you DON'T want to have auto-loaded.
-	  You can optionally do the same with the other IEEE 1394/ FireWire
-	  drivers.
-
-	  If you have an old modprobe which doesn't implement the blacklist
-	  directive, use either
-
-	       install firewire-ohci /bin/true
-	  or
-	       install ohci1394 /bin/true
-
-	  and so on, depending on which modules you DON't want to have
-	  auto-loaded.
+	  you are doing.
 
 config FIREWIRE_OHCI
 	tristate "Support for OHCI FireWire host controllers"
@@ -57,8 +35,24 @@ config FIREWIRE_OHCI
 
           NOTE:
 
-	  If you also build ohci1394 of the classic stack, blacklist either
-	  ohci1394 or firewire-ohci to let hotplug load only the desired driver.
+	  You should only build ohci1394 or firewire-ohci, but not both.
+	  If you nevertheless want to install both, you should configure them
+	  only as modules and blacklist the driver(s) which you don't want to
+	  have auto-loaded.  Add either
+
+	      blacklist firewire-ohci
+	  or
+	      blacklist ohci1394
+	      blacklist video1394
+	      blacklist dv1394
+
+	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+	  depending on your distribution.  The latter two modules should be
+	  blacklisted together with ohci1394 because they depend on ohci1394.
+
+	  If you have an old modprobe which doesn't implement the blacklist
+	  directive, use "install modulename /bin/true" for the modules to be
+	  blacklisted.
 
 config FIREWIRE_SBP2
 	tristate "Support for storage devices (SBP-2 protocol driver)"
@@ -75,9 +69,3 @@ config FIREWIRE_SBP2
 
 	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
 	  configuration section.
-
-          NOTE:
-
-	  If you also build sbp2 of the classic stack, blacklist either sbp2
-	  or firewire-sbp2 to let hotplug load only the desired driver.
-

drivers/firewire/fw-ohci.c

@@ -33,6 +33,10 @@
 #include <asm/page.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_PPC_PMAC
+#include <asm/pmac_feature.h>
+#endif
+
 #include "fw-ohci.h"
 #include "fw-transaction.h"
 
@@ -175,6 +179,7 @@ struct fw_ohci {
 	int generation;
 	int request_generation;
 	u32 bus_seconds;
+	bool old_uninorth;
 
 	/*
 	 * Spinlock for accessing fw_ohci data.  Never call out of
@@ -276,19 +281,13 @@ static int ar_context_add_page(struct ar_context *ctx)
 {
 	struct device *dev = ctx->ohci->card.device;
 	struct ar_buffer *ab;
-	dma_addr_t ab_bus;
+	dma_addr_t uninitialized_var(ab_bus);
 	size_t offset;
 
-	ab = (struct ar_buffer *) __get_free_page(GFP_ATOMIC);
+	ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC);
 	if (ab == NULL)
 		return -ENOMEM;
 
-	ab_bus = dma_map_single(dev, ab, PAGE_SIZE, DMA_BIDIRECTIONAL);
-	if (dma_mapping_error(ab_bus)) {
-		free_page((unsigned long) ab);
-		return -ENOMEM;
-	}
-
 	memset(&ab->descriptor, 0, sizeof(ab->descriptor));
 	ab->descriptor.control        = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
 						    DESCRIPTOR_STATUS |
@@ -299,8 +298,6 @@ static int ar_context_add_page(struct ar_context *ctx)
 	ab->descriptor.res_count      = cpu_to_le16(PAGE_SIZE - offset);
 	ab->descriptor.branch_address = 0;
 
-	dma_sync_single_for_device(dev, ab_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
-
 	ctx->last_buffer->descriptor.branch_address = cpu_to_le32(ab_bus | 1);
 	ctx->last_buffer->next = ab;
 	ctx->last_buffer = ab;
@@ -311,15 +308,22 @@ static int ar_context_add_page(struct ar_context *ctx)
 	return 0;
 }
 
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+#define cond_le32_to_cpu(v) \
+	(ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v))
+#else
+#define cond_le32_to_cpu(v) le32_to_cpu(v)
+#endif
+
 static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 {
 	struct fw_ohci *ohci = ctx->ohci;
 	struct fw_packet p;
 	u32 status, length, tcode;
 
-	p.header[0] = le32_to_cpu(buffer[0]);
-	p.header[1] = le32_to_cpu(buffer[1]);
-	p.header[2] = le32_to_cpu(buffer[2]);
+	p.header[0] = cond_le32_to_cpu(buffer[0]);
+	p.header[1] = cond_le32_to_cpu(buffer[1]);
+	p.header[2] = cond_le32_to_cpu(buffer[2]);
 
 	tcode = (p.header[0] >> 4) & 0x0f;
 	switch (tcode) {
@@ -331,7 +335,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 		break;
 
 	case TCODE_READ_BLOCK_REQUEST :
-		p.header[3] = le32_to_cpu(buffer[3]);
+		p.header[3] = cond_le32_to_cpu(buffer[3]);
 		p.header_length = 16;
 		p.payload_length = 0;
 		break;
@@ -340,7 +344,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 	case TCODE_READ_BLOCK_RESPONSE:
 	case TCODE_LOCK_REQUEST:
 	case TCODE_LOCK_RESPONSE:
-		p.header[3] = le32_to_cpu(buffer[3]);
+		p.header[3] = cond_le32_to_cpu(buffer[3]);
 		p.header_length = 16;
 		p.payload_length = p.header[3] >> 16;
 		break;
@@ -357,7 +361,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 
 	/* FIXME: What to do about evt_* errors? */
 	length = (p.header_length + p.payload_length + 3) / 4;
-	status = le32_to_cpu(buffer[length]);
+	status = cond_le32_to_cpu(buffer[length]);
 
 	p.ack        = ((status >> 16) & 0x1f) - 16;
 	p.speed      = (status >> 21) & 0x7;
@@ -375,7 +379,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 	 */
 
 	if (p.ack + 16 == 0x09)
-		ohci->request_generation = (buffer[2] >> 16) & 0xff;
+		ohci->request_generation = (p.header[2] >> 16) & 0xff;
 	else if (ctx == &ohci->ar_request_ctx)
 		fw_core_handle_request(&ohci->card, &p);
 	else
@@ -397,6 +401,7 @@ static void ar_context_tasklet(unsigned long data)
 
 	if (d->res_count == 0) {
 		size_t size, rest, offset;
+		dma_addr_t buffer_bus;
 
 		/*
 		 * This descriptor is finished and we may have a
@@ -405,9 +410,7 @@ static void ar_context_tasklet(unsigned long data)
 		 */
 
 		offset = offsetof(struct ar_buffer, data);
-		dma_unmap_single(ohci->card.device,
-			le32_to_cpu(ab->descriptor.data_address) - offset,
-			PAGE_SIZE, DMA_BIDIRECTIONAL);
+		buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
 
 		buffer = ab;
 		ab = ab->next;
@@ -423,7 +426,8 @@ static void ar_context_tasklet(unsigned long data)
 		while (buffer < end)
 			buffer = handle_ar_packet(ctx, buffer);
 
-		free_page((unsigned long)buffer);
+		dma_free_coherent(ohci->card.device, PAGE_SIZE,
+				  buffer, buffer_bus);
 		ar_context_add_page(ctx);
 	} else {
 		buffer = ctx->pointer;
@@ -532,7 +536,7 @@ static int
 context_add_buffer(struct context *ctx)
 {
 	struct descriptor_buffer *desc;
-	dma_addr_t bus_addr;
+	dma_addr_t uninitialized_var(bus_addr);
 	int offset;
 
 	/*
@@ -1022,13 +1026,14 @@ static void bus_reset_tasklet(unsigned long data)
 	 */
 
 	self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff;
-	generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
+	generation = (cond_le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
 	rmb();
 
 	for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
 		if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1])
 			fw_error("inconsistent self IDs\n");
-		ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]);
+		ohci->self_id_buffer[j] =
+				cond_le32_to_cpu(ohci->self_id_cpu[i]);
 	}
 	rmb();
 
@@ -1316,7 +1321,7 @@ ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length)
 	unsigned long flags;
 	int retval = -EBUSY;
 	__be32 *next_config_rom;
-	dma_addr_t next_config_rom_bus;
+	dma_addr_t uninitialized_var(next_config_rom_bus);
 
 	ohci = fw_ohci(card);
 
@@ -1487,7 +1492,7 @@ static int handle_ir_dualbuffer_packet(struct context *context,
 	void *p, *end;
 	int i;
 
-	if (db->first_res_count > 0 && db->second_res_count > 0) {
+	if (db->first_res_count != 0 && db->second_res_count != 0) {
 		if (ctx->excess_bytes <= le16_to_cpu(db->second_req_count)) {
 			/* This descriptor isn't done yet, stop iteration. */
 			return 0;
@@ -1513,7 +1518,7 @@ static int handle_ir_dualbuffer_packet(struct context *context,
 		memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4);
 		i += ctx->base.header_size;
 		ctx->excess_bytes +=
-			(le32_to_cpu(*(u32 *)(p + 4)) >> 16) & 0xffff;
+			(le32_to_cpu(*(__le32 *)(p + 4)) >> 16) & 0xffff;
 		p += ctx->base.header_size + 4;
 	}
 	ctx->header_length = i;
@@ -2048,6 +2053,18 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	int err;
 	size_t size;
 
+#ifdef CONFIG_PPC_PMAC
+	/* Necessary on some machines if fw-ohci was loaded/ unloaded before */
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(dev);
+
+		if (ofn) {
+			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1);
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+		}
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
 	if (ohci == NULL) {
 		fw_error("Could not malloc fw_ohci data.\n");
@@ -2066,6 +2083,10 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 	pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
 	pci_set_drvdata(dev, ohci);
 
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+	ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
+			     dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW;
+#endif
 	spin_lock_init(&ohci->lock);
 
 	tasklet_init(&ohci->bus_reset_tasklet,
@@ -2182,6 +2203,19 @@ static void pci_remove(struct pci_dev *dev)
 	pci_disable_device(dev);
 	fw_card_put(&ohci->card);
 
+#ifdef CONFIG_PPC_PMAC
+	/* On UniNorth, power down the cable and turn off the chip clock
+	 * to save power on laptops */
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(dev);
+
+		if (ofn) {
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0);
+		}
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	fw_notify("Removed fw-ohci device.\n");
 }
 
@@ -2202,6 +2236,16 @@ static int pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (err)
 		fw_error("pci_set_power_state failed with %d\n", err);
 
+/* PowerMac suspend code comes last */
+#ifdef CONFIG_PPC_PMAC
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(pdev);
+
+		if (ofn)
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0);
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	return 0;
 }
 
@@ -2210,6 +2254,16 @@ static int pci_resume(struct pci_dev *pdev)
 	struct fw_ohci *ohci = pci_get_drvdata(pdev);
 	int err;
 
+/* PowerMac resume code comes first */
+#ifdef CONFIG_PPC_PMAC
+	if (machine_is(powermac)) {
+		struct device_node *ofn = pci_device_to_OF_node(pdev);
+
+		if (ofn)
+			pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1);
+	}
+#endif /* CONFIG_PPC_PMAC */
+
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	err = pci_enable_device(pdev);

drivers/firewire/fw-sbp2.c

@@ -173,6 +173,7 @@ struct sbp2_target {
 #define SBP2_ORB_TIMEOUT		2000U	/* Timeout in ms */
 #define SBP2_ORB_NULL			0x80000000
 #define SBP2_MAX_SG_ELEMENT_LENGTH	0xf000
+#define SBP2_RETRY_LIMIT		0xf	/* 15 retries */
 
 #define SBP2_DIRECTION_TO_MEDIA		0x0
 #define SBP2_DIRECTION_FROM_MEDIA	0x1
@@ -330,6 +331,11 @@ static const struct {
 		.model			= ~0,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
+	/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+		.firmware_revision	= 0x002600,
+		.model			= ~0,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
+	},
 
 	/*
 	 * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
@@ -812,6 +818,30 @@ static void sbp2_target_put(struct sbp2_target *tgt)
 	kref_put(&tgt->kref, sbp2_release_target);
 }
 
+static void
+complete_set_busy_timeout(struct fw_card *card, int rcode,
+			  void *payload, size_t length, void *done)
+{
+	complete(done);
+}
+
+static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
+{
+	struct fw_device *device = fw_device(lu->tgt->unit->device.parent);
+	DECLARE_COMPLETION_ONSTACK(done);
+	struct fw_transaction t;
+	static __be32 busy_timeout;
+
+	/* FIXME: we should try to set dual-phase cycle_limit too */
+	busy_timeout = cpu_to_be32(SBP2_RETRY_LIMIT);
+
+	fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST,
+			lu->tgt->node_id, lu->generation, device->max_speed,
+			CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &busy_timeout,
+			sizeof(busy_timeout), complete_set_busy_timeout, &done);
+	wait_for_completion(&done);
+}
+
 static void sbp2_reconnect(struct work_struct *work);
 
 static void sbp2_login(struct work_struct *work)
@@ -864,10 +894,8 @@ static void sbp2_login(struct work_struct *work)
 	fw_notify("%s: logged in to LUN %04x (%d retries)\n",
 		  tgt->bus_id, lu->lun, lu->retries);
 
-#if 0
-	/* FIXME: The linux1394 sbp2 does this last step. */
-	sbp2_set_busy_timeout(scsi_id);
-#endif
+	/* set appropriate retry limit(s) in BUSY_TIMEOUT register */
+	sbp2_set_busy_timeout(lu);
 
 	PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect);
 	sbp2_agent_reset(lu);

drivers/firewire/fw-topology.c

@@ -21,6 +21,7 @@
 #include <linux/module.h>
 #include <linux/wait.h>
 #include <linux/errno.h>
+#include <asm/bug.h>
 #include <asm/system.h>
 #include "fw-transaction.h"
 #include "fw-topology.h"
@@ -424,8 +425,8 @@ update_tree(struct fw_card *card, struct fw_node *root)
 	node1 = fw_node(list1.next);
 
 	while (&node0->link != &list0) {
+		WARN_ON(node0->port_count != node1->port_count);
 
-		/* assert(node0->port_count == node1->port_count); */
 		if (node0->link_on && !node1->link_on)
 			event = FW_NODE_LINK_OFF;
 		else if (!node0->link_on && node1->link_on)

drivers/firewire/fw-transaction.c

@@ -751,7 +751,7 @@ handle_topology_map(struct fw_card *card, struct fw_request *request,
 		    void *payload, size_t length, void *callback_data)
 {
 	int i, start, end;
-	u32 *map;
+	__be32 *map;
 
 	if (!TCODE_IS_READ_REQUEST(tcode)) {
 		fw_send_response(card, request, RCODE_TYPE_ERROR);

drivers/firewire/fw-transaction.h

@@ -87,11 +87,11 @@ static inline void
 fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
 {
 	u32    *dst = _dst;
-	u32 *src = _src;
+	__be32 *src = _src;
 	int i;
 
 	for (i = 0; i < size / 4; i++)
-		dst[i] = cpu_to_be32(src[i]);
+		dst[i] = be32_to_cpu(src[i]);
 }
 
 static inline void

drivers/ieee1394/sbp2.c

@@ -376,6 +376,11 @@ static const struct {
 		.model_id		= SBP2_ROM_VALUE_WILDCARD,
 		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
 	},
+	/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ {
+		.firmware_revision	= 0x002600,
+		.model_id		= SBP2_ROM_VALUE_WILDCARD,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
+	},
 	/* iPod 4th generation */ {
 		.firmware_revision	= 0x0a2700,
 		.model_id		= 0x000021,