m32r: Fix ei_tx_timeout() in drivers/net/lib8390.c

Change INT0 trigger mode from edge-sense mode to level-sense mode,
in order to fix the following timeout error:
  'NETDEV WATCHDOG: eth0: transmit timed out'.

This patch is required only for the Mappi platform.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Hitoshi Yamamoto <hitoshiy@linux-m32r.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/m32r/kernel/setup_mappi.c

@@ -45,7 +45,8 @@ static void mask_and_ack_mappi(unsigned int irq)
 
 static void end_mappi_irq(unsigned int irq)
 {
-	enable_mappi_irq(irq);
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_mappi_irq(irq);
 }
 
 static unsigned int startup_mappi_irq(unsigned int irq)
@@ -88,7 +89,7 @@ void __init init_IRQ(void)
 	irq_desc[M32R_IRQ_INT0].chip = &mappi_irq_type;
 	irq_desc[M32R_IRQ_INT0].action = NULL;
 	irq_desc[M32R_IRQ_INT0].depth = 1;
-	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
+	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
 	disable_mappi_irq(M32R_IRQ_INT0);
 #endif /* CONFIG_M32R_NE2000 */
 

drivers/net/lib8390.c

@@ -219,15 +219,6 @@ static void ei_tx_timeout(struct net_device *dev)
 	int txsr, isr, tickssofar = jiffies - dev->trans_start;
 	unsigned long flags;
 
-#if defined(CONFIG_M32R) && defined(CONFIG_SMP)
-	unsigned long icucr;
-
-	local_irq_save(flags);
-	icucr = inl(M32R_ICU_CR1_PORTL);
-	icucr |= M32R_ICUCR_ISMOD11;
-	outl(icucr, M32R_ICU_CR1_PORTL);
-	local_irq_restore(flags);
-#endif
 	ei_local->stat.tx_errors++;
 
 	spin_lock_irqsave(&ei_local->page_lock, flags);