Merge branch 'omap-for-linus' of...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits)
  omap2: Initialize Menelaus and MMC for N8X0
  AM3517 EVM: correct typo - tca6416 mispelt as tca6516
  AM3517 EVM: Enable I2C support
  AM35x: Enable OMAP_MUX in defconfig
  AM35x: Add missing GPIO mux config for EHCI port
  Zoom3: Defconfig update
  omap: i2c: Fix muxing for command line enabled bus
  OMAP4: clock: Remove clock hacks from timer-gp.c
  OMAP4: clock: Add dummy clock nodes for interface clocks
  OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck
  OMAP2+ clock: revise omap2_clk_{disable,enable}()
  OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
  OMAP clockdomain: if no autodeps exist, don't try to add or remove them
  OMAP hwmod: add hwmod class support
  OMAP hwmod: convert header files with static allocations into C files
  OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con
  OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code
  OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630
  OMAP4 clock: drop the ALWAYS_ENABLED clock flag
  OMAP clock: drop RATE_FIXED clock flag
  ...

arch/arm/configs/am3517_evm_defconfig

@@ -201,7 +201,7 @@ CONFIG_ARCH_OMAP3=y
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MCBSP is not set
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
@@ -590,7 +590,46 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #

arch/arm/configs/omap3_evm_defconfig

@@ -187,6 +187,8 @@ CONFIG_ARCH_OMAP3=y
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
@@ -333,7 +335,7 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
@@ -1339,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set

arch/arm/configs/omap_4430sdp_defconfig

@@ -199,7 +199,7 @@ CONFIG_ARCH_OMAP4=y
 #
 # CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
@@ -307,7 +307,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -491,7 +491,8 @@ CONFIG_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #

arch/arm/configs/omap_zoom3_defconfig

@@ -1136,7 +1136,7 @@ CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
 # MMC/SD/SDIO Card Drivers
@@ -1186,7 +1186,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
+CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1416,7 +1416,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set

arch/arm/configs/rx51_defconfig

@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
+CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1362,7 +1362,7 @@ CONFIG_MMC=y
 # MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 # CONFIG_SDIO_UART is not set
 # CONFIG_MMC_TEST is not set
 

arch/arm/mach-omap1/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

arch/arm/mach-omap1/board-fsample.c

@@ -18,18 +18,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
@@ -150,9 +151,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -164,7 +165,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,

arch/arm/mach-omap1/board-h2.c

@@ -26,6 +26,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
@@ -35,7 +36,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
@@ -45,6 +45,7 @@
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h2.h"
 
@@ -121,9 +122,9 @@ static struct mtd_partition h2_nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h2_nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h2_nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= h2_nor_partitions,
 	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
 };
@@ -134,7 +135,7 @@ static struct resource h2_nor_resource = {
 };
 
 static struct platform_device h2_nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h2_nor_data,

arch/arm/mach-omap1/board-h3.c

@@ -25,6 +25,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
@@ -47,6 +47,7 @@
 #include <plat/keypad.h>
 #include <plat/dma.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h3.h"
 
@@ -126,9 +127,9 @@ static struct mtd_partition nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -139,7 +140,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,

arch/arm/mach-omap1/board-innovator.c

@@ -22,16 +22,17 @@
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <mach/gpio.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition innovator_partitions[] = {
 	}
 };
 
-static struct flash_platform_data innovator_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data innovator_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= innovator_partitions,
 	.nr_parts	= ARRAY_SIZE(innovator_partitions),
 };
@@ -108,7 +109,7 @@ static struct resource innovator_flash_resource = {
 };
 
 static struct platform_device innovator_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &innovator_flash_data,

arch/arm/mach-omap1/board-osk.c

@@ -37,6 +37,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <linux/i2c/tps65010.h>
 
@@ -46,8 +47,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
+#include <plat/flash.h>
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition osk_partitions[] = {
 	}
 };
 
-static struct flash_platform_data osk_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data osk_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= osk_partitions,
 	.nr_parts	= ARRAY_SIZE(osk_partitions),
 };
@@ -107,7 +108,7 @@ static struct resource osk_flash_resource = {
 };
 
 static struct platform_device osk5912_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &osk_flash_data,

arch/arm/mach-omap1/devices.c

@@ -73,7 +73,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
 
 static struct resource mbox_resources[] = {
 	{

arch/arm/mach-omap1/i2c.c

@@ -23,9 +23,7 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap1_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap7xx()) {
 		omap_cfg_reg(I2C_7XX_SDA);
@@ -34,6 +32,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		omap_cfg_reg(I2C_SDA);
 		omap_cfg_reg(I2C_SCL);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }

arch/arm/mach-omap2/board-apollon.c

@@ -337,7 +337,7 @@ static void __init omap_apollon_init(void)
 static void __init omap_apollon_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")