Commit 506847ad authored by Rajkumar Manoharan's avatar Rajkumar Manoharan Committed by John W. Linville

ath9k_hw: cleanup MCI gpm offset state

Add utility functions to get and test GPM offset and
remove MCI_STATE*_GPM_OFFSET states.
Signed-off-by: default avatarRajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 64bc1239
......@@ -593,8 +593,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
if (!time_out)
break;
offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
&more_data);
offset = ar9003_mci_get_next_gpm_offset(ah, false, &more_data);
if (offset == MCI_GPM_INVALID)
continue;
......@@ -658,8 +657,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
time_out = 0;
while (more_data == MCI_GPM_MORE) {
offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
&more_data);
offset = ar9003_mci_get_next_gpm_offset(ah, false, &more_data);
if (offset == MCI_GPM_INVALID)
break;
......@@ -894,7 +892,7 @@ void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
}
/* Check pending GPM msg before MCI Reset Rx */
ar9003_mci_state(ah, MCI_STATE_CHECK_GPM_OFFSET, NULL);
ar9003_mci_check_gpm_offset(ah);
regval |= SM(1, AR_MCI_COMMAND2_RESET_RX);
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
......@@ -902,7 +900,7 @@ void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
regval &= ~SM(1, AR_MCI_COMMAND2_RESET_RX);
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
ar9003_mci_get_next_gpm_offset(ah, true, NULL);
REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE,
(SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
......@@ -1170,7 +1168,7 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 value = 0, more_gpm = 0, gpm_ptr;
u32 value = 0;
u8 query_type;
switch (state_type) {
......@@ -1182,96 +1180,6 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
value = 0;
}
value &= AR_BTCOEX_CTRL_MCI_MODE_EN;
break;
case MCI_STATE_INIT_GPM_OFFSET:
value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
mci->gpm_idx = value;
break;
case MCI_STATE_CHECK_GPM_OFFSET:
/*
* This should only be called before "MAC Warm Reset" or
* "MCI Reset Rx".
*/
value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
if (mci->gpm_idx == value)
break;
ath_dbg(common, MCI,
"GPM cached write pointer mismatch %d %d\n",
mci->gpm_idx, value);
mci->query_bt = true;
mci->need_flush_btinfo = true;
mci->gpm_idx = 0;
break;
case MCI_STATE_NEXT_GPM_OFFSET:
case MCI_STATE_LAST_GPM_OFFSET:
/*
* This could be useful to avoid new GPM message interrupt which
* may lead to spurious interrupt after power sleep, or multiple
* entry of ath_mci_intr().
* Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
* alleviate this effect, but clearing GPM RX interrupt bit is
* safe, because whether this is called from hw or driver code
* there must be an interrupt bit set/triggered initially
*/
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
AR_MCI_INTERRUPT_RX_MSG_GPM);
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
value = gpm_ptr;
if (value == 0)
value = mci->gpm_len - 1;
else if (value >= mci->gpm_len) {
if (value != 0xFFFF)
value = 0;
} else {
value--;
}
if (value == 0xFFFF) {
value = MCI_GPM_INVALID;
more_gpm = MCI_GPM_NOMORE;
} else if (state_type == MCI_STATE_NEXT_GPM_OFFSET) {
if (gpm_ptr == mci->gpm_idx) {
value = MCI_GPM_INVALID;
more_gpm = MCI_GPM_NOMORE;
} else {
for (;;) {
u32 temp_index;
/* skip reserved GPM if any */
if (value != mci->gpm_idx)
more_gpm = MCI_GPM_MORE;
else
more_gpm = MCI_GPM_NOMORE;
temp_index = mci->gpm_idx;
mci->gpm_idx++;
if (mci->gpm_idx >=
mci->gpm_len)
mci->gpm_idx = 0;
if (ar9003_mci_is_gpm_valid(ah,
temp_index)) {
value = temp_index;
break;
}
if (more_gpm == MCI_GPM_NOMORE) {
value = MCI_GPM_INVALID;
break;
}
}
}
if (p_data)
*p_data = more_gpm;
}
if (value != MCI_GPM_INVALID)
value <<= 4;
break;
case MCI_STATE_LAST_SCHD_MSG_OFFSET:
value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
......@@ -1450,3 +1358,99 @@ void ar9003_mci_set_power_awake(struct ath_hw *ah)
udelay(50);
}
}
void ar9003_mci_check_gpm_offset(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 offset;
/*
* This should only be called before "MAC Warm Reset" or "MCI Reset Rx".
*/
offset = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
if (mci->gpm_idx == offset)
return;
ath_dbg(common, MCI, "GPM cached write pointer mismatch %d %d\n",
mci->gpm_idx, offset);
mci->query_bt = true;
mci->need_flush_btinfo = true;
mci->gpm_idx = 0;
}
u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, bool first, u32 *more)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 offset, more_gpm = 0, gpm_ptr;
if (first) {
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
mci->gpm_idx = gpm_ptr;
return gpm_ptr;
}
/*
* This could be useful to avoid new GPM message interrupt which
* may lead to spurious interrupt after power sleep, or multiple
* entry of ath_mci_intr().
* Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
* alleviate this effect, but clearing GPM RX interrupt bit is
* safe, because whether this is called from hw or driver code
* there must be an interrupt bit set/triggered initially
*/
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
AR_MCI_INTERRUPT_RX_MSG_GPM);
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
offset = gpm_ptr;
if (!offset)
offset = mci->gpm_len - 1;
else if (offset >= mci->gpm_len) {
if (offset != 0xFFFF)
offset = 0;
} else {
offset--;
}
if ((offset == 0xFFFF) || (gpm_ptr == mci->gpm_idx)) {
offset = MCI_GPM_INVALID;
more_gpm = MCI_GPM_NOMORE;
goto out;
}
for (;;) {
u32 temp_index;
/* skip reserved GPM if any */
if (offset != mci->gpm_idx)
more_gpm = MCI_GPM_MORE;
else
more_gpm = MCI_GPM_NOMORE;
temp_index = mci->gpm_idx;
mci->gpm_idx++;
if (mci->gpm_idx >= mci->gpm_len)
mci->gpm_idx = 0;
if (ar9003_mci_is_gpm_valid(ah, temp_index)) {
offset = temp_index;
break;
}
if (more_gpm == MCI_GPM_NOMORE) {
offset = MCI_GPM_INVALID;
break;
}
}
if (offset != MCI_GPM_INVALID)
offset <<= 4;
out:
if (more)
*more = more_gpm;
return offset;
}
EXPORT_SYMBOL(ar9003_mci_get_next_gpm_offset);
......@@ -189,10 +189,6 @@ enum mci_bt_state {
/* Type of state query */
enum mci_state_type {
MCI_STATE_ENABLE,
MCI_STATE_INIT_GPM_OFFSET,
MCI_STATE_CHECK_GPM_OFFSET,
MCI_STATE_NEXT_GPM_OFFSET,
MCI_STATE_LAST_GPM_OFFSET,
MCI_STATE_BT,
MCI_STATE_SET_BT_SLEEP,
MCI_STATE_SET_BT_AWAKE,
......@@ -266,6 +262,7 @@ void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
void ar9003_mci_cleanup(struct ath_hw *ah);
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
u32 *rx_msg_intr);
u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, bool first, u32 *more);
/*
* These functions are used by ath9k_hw.
*/
......@@ -286,6 +283,7 @@ void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked);
void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah);
void ar9003_mci_set_power_awake(struct ath_hw *ah);
void ar9003_mci_check_gpm_offset(struct ath_hw *ah);
#else
......@@ -329,6 +327,9 @@ static inline void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
static inline void ar9003_mci_set_power_awake(struct ath_hw *ah)
{
}
static inline void ar9003_mci_check_gpm_offset(struct ath_hw *ah)
{
}
#endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */
#endif
......@@ -1349,7 +1349,7 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
}
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_state(ah, MCI_STATE_CHECK_GPM_OFFSET, NULL);
ar9003_mci_check_gpm_offset(ah);
REG_WRITE(ah, AR_RTC_RC, rst_flags);
......
......@@ -421,7 +421,7 @@ void ath_mci_intr(struct ath_softc *sc)
ar9003_mci_get_interrupt(sc->sc_ah, &mci_int, &mci_int_rxmsg);
if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) == 0) {
ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
ar9003_mci_get_next_gpm_offset(ah, true, NULL);
return;
}
......@@ -488,7 +488,7 @@ void ath_mci_intr(struct ath_softc *sc)
while (more_data == MCI_GPM_MORE) {
pgpm = mci->gpm_buf.bf_addr;
offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
offset = ar9003_mci_get_next_gpm_offset(ah, false,
&more_data);
if (offset == MCI_GPM_INVALID)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment