staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip

Commit 81f153fa ("staging: rtl8723bs: fix wireless regulatory API
misuse") moved the wiphy_apply_custom_regulatory() call to earlier in the
driver's init-sequence, so that it gets called before wiphy_register().

But at this point in time the eFuses which code the regulatory-settings
for the chip have not been read by the driver yet, causing
_rtw_reg_apply_flags() to set the IEEE80211_CHAN_DISABLED flag on *all*
channels.

On the device where I initially tested the fix, a Jumper EZpad 7 tablet,
this does not cause any problems because shortly after init the
rtw_reg_notifier() gets called fixing things up. I guess this happens
into response to receiving a (broadcast) packet with regulatory info
from the access-point ?

But on another device with a RTL8723BS wifi chip, an Acer Switch 10E
(SW3-016), the rtw_reg_notifier() never gets called. I assume that some
fuse has been set on this device to ignore regulatory info received from
access-points.

This means that on the Acer the driver is stuck in a state with all
channels disabled, leading to non working Wifi.

We cannot move the wiphy_apply_custom_regulatory() call back, because
that call must be made before the wiphy_register() call.

Instead move the entire rtw_wdev_alloc() call to after the Efuses have
been read, fixing all channels being disabled in the initial channel-map.

Fixes: 81f153fa ("staging: rtl8723bs: fix wireless regulatory API misuse")
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210201152956.370186-2-hdegoede@redhat.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

drivers/staging/rtl8723bs/os_dep/sdio_intf.c

@@ -339,8 +339,6 @@ static struct adapter *rtw_sdio_if1_init(struct dvobj_priv *dvobj, const struct
 
 	padapter = rtw_netdev_priv(pnetdev);
 
-	rtw_wdev_alloc(padapter, dvobj_to_dev(dvobj));
-
 	/* 3 3. init driver special setting, interface, OS and hardware relative */
 
 	/* 4 3.1 set hardware operation functions */
@@ -378,6 +376,8 @@ static struct adapter *rtw_sdio_if1_init(struct dvobj_priv *dvobj, const struct
 		goto free_hal_data;
 	}
 
+	rtw_wdev_alloc(padapter, dvobj_to_dev(dvobj));
+
 	/* 3 8. get WLan MAC address */
 	/*  set mac addr */
 	rtw_macaddr_cfg(&psdio->func->dev, padapter->eeprompriv.mac_addr);