wifi: mt76: mt7915: don't claim 160MHz support with mt7915 DBDC

The hardware simply does not support this in DBDC mode.  Remove it from
the HE capabilities.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt7915/init.c

@@ -761,8 +761,12 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
 	u8 c, sts_160 = sts;
 
 	/* Can do 1/2 of STS in 160Mhz mode for mt7915 */
-	if (is_mt7915(&dev->mt76) && !dev->dbdc_support)
+	if (is_mt7915(&dev->mt76)) {
+		if (!dev->dbdc_support)
 			sts_160 /= 2;
+		else
+			sts_160 = 0;
+	}
 
 #ifdef CONFIG_MAC80211_MESH
 	if (vif == NL80211_IFTYPE_MESH_POINT)
@@ -772,8 +776,9 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
 	elem->phy_cap_info[3] &= ~IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER;
 	elem->phy_cap_info[4] &= ~IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
 
-	c = IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK |
-	    IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK;
+	c = IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
+	if (sts_160)
+		c |= IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK;
 	elem->phy_cap_info[5] &= ~c;
 
 	c = IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMING_FB |
@@ -789,8 +794,9 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
 	elem->phy_cap_info[2] |= c;
 
 	c = IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE |
-	    IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 |
-	    IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4;
+	    IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4;
+	if (sts_160)
+		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4;
 	elem->phy_cap_info[4] |= c;
 
 	/* do not support NG16 due to spec D4.0 changes subcarrier idx */
@@ -815,11 +821,12 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
 	elem->phy_cap_info[4] |= IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
 
 	/* num_snd_dim
-	 * for mt7915, max supported sts is 2 for bw > 80MHz
+	 * for mt7915, max supported sts is 2 for bw > 80MHz and 0 if dbdc
 	 */
 	c = FIELD_PREP(IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK,
-		       sts - 1) |
-	    FIELD_PREP(IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK,
+		       sts - 1);
+	if (sts_160)
+		c |= FIELD_PREP(IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK,
 				sts_160 - 1);
 	elem->phy_cap_info[5] |= c;
 
@@ -865,11 +872,14 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
 	u16 mcs_map_160 = 0;
 	u8 nss_160;
 
+	if (!is_mt7915(&dev->mt76))
+		nss_160 = nss;
+	else if (!dev->dbdc_support)
 		/* Can do 1/2 of NSS streams in 160Mhz mode for mt7915 */
-	if (is_mt7915(&dev->mt76) && !dev->dbdc_support)
 		nss_160 = nss / 2;
 	else
-		nss_160 = nss;
+		/* Can't do 160MHz with mt7915 dbdc */
+		nss_160 = 0;
 
 	for (i = 0; i < 8; i++) {
 		if (i < nss)
@@ -915,11 +925,14 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
 		if (band == NL80211_BAND_2GHZ)
 			he_cap_elem->phy_cap_info[0] =
 				IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G;
-		else
+		else if (nss_160)
 			he_cap_elem->phy_cap_info[0] =
 				IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
 				IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
 				IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
+		else
+			he_cap_elem->phy_cap_info[0] =
+				IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G;
 
 		he_cap_elem->phy_cap_info[1] =
 			IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD;
@@ -973,9 +986,11 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
 				IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI;
 			he_cap_elem->phy_cap_info[8] |=
 				IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
-				IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
-				IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU |
 				IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_484;
+			if (nss_160)
+				he_cap_elem->phy_cap_info[8] |=
+					IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
+					IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU;
 			he_cap_elem->phy_cap_info[9] |=
 				IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM |
 				IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK |