Commit 51378066 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'samsung-fixes-1' of...

Merge tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

From Kukjin Kim:
Samsung fixes for v3.11
- fix kernel booting on exynos5440
  skip pm which is not supported
  update regarding LPAE features
- fix s3c2440 uart with adding clkdev entries
- fix compilatioin for Samsung SoCs with selecting pm
- update ARCH_NR_GPIO to support exynos4412 has more gpios

* tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos
  ARM: EXYNOS: Fix low level debug support
  ARM: SAMSUNG: Save/restore only selected uart's registers
  ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm
  ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART
  ARM: EXYNOS: Enable 64-bit DMA for EXYNOS5440 if LPAE is enabled
  ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZE
  ARM: EXYNOS: skip pm support on exynos5440
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents f82a3133 53302bf6
......@@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 512 if SOC_OMAP5
default 512 if ARCH_KEYSTONE
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI
......
......@@ -92,6 +92,7 @@ config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
......
......@@ -14,7 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
......
......@@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static void exynos5440_map_io(void);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
......@@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
}, {
.idcode = EXYNOS5440_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5440_map_io,
.init = exynos_init,
.name = name_exynos5440,
},
......@@ -149,11 +147,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS4_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
......@@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS5_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
},
};
static struct map_desc exynos5440_iodesc0[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS5440_PA_UART0),
.length = SZ_512K,
.type = MT_DEVICE,
},
};
......@@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
static void __init exynos5440_map_io(void)
{
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
void __init exynos_init_time(void)
{
of_clk_init(NULL);
......
......@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
};
extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
extern void s3c_cpu_resume(void);
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
......@@ -25,6 +25,7 @@
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include "common.h"
......
......@@ -15,8 +15,13 @@
#define PLAT_PHYS_OFFSET UL(0x40000000)
#ifndef CONFIG_ARM_LPAE
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
#else
#define MAX_PHYSMEM_BITS 36
#define SECTION_SIZE_BITS 31
#endif
#endif /* __ASM_ARCH_MEMORY_H */
......@@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void)
struct clk *pll_base;
unsigned int tmp;
if (soc_is_exynos5440())
return 0;
s3c_pm_init();
/* All wakeup disable */
......@@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = {
static __init int exynos_pm_syscore_init(void)
{
if (soc_is_exynos5440())
return 0;
register_syscore_ops(&exynos_pm_syscore_ops);
return 0;
}
......
......@@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
}
};
static struct clk init_clocks[] = {
{
static struct clk clk_lcd = {
.name = "lcd",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_LCDC,
}, {
};
static struct clk clk_gpio = {
.name = "gpio",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_GPIO,
}, {
};
static struct clk clk_usb_host = {
.name = "usb-host",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBH,
}, {
};
static struct clk clk_usb_device = {
.name = "usb-device",
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBD,
}, {
};
static struct clk clk_timers = {
.name = "timers",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_PWMT,
}, {
};
struct clk s3c24xx_clk_uart0 = {
.name = "uart",
.devname = "s3c2410-uart.0",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART0,
}, {
};
struct clk s3c24xx_clk_uart1 = {
.name = "uart",
.devname = "s3c2410-uart.1",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART1,
}, {
};
struct clk s3c24xx_clk_uart2 = {
.name = "uart",
.devname = "s3c2410-uart.2",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART2,
}, {
};
static struct clk clk_rtc = {
.name = "rtc",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_RTC,
}, {
};
static struct clk clk_watchdog = {
.name = "watchdog",
.parent = &clk_p,
.ctrlbit = 0,
}, {
};
static struct clk clk_usb_bus_host = {
.name = "usb-bus-host",
.parent = &clk_usb_bus,
}, {
};
static struct clk clk_usb_bus_gadget = {
.name = "usb-bus-gadget",
.parent = &clk_usb_bus,
},
};
static struct clk *init_clocks[] = {
&clk_lcd,
&clk_gpio,
&clk_usb_host,
&clk_usb_device,
&clk_timers,
&s3c24xx_clk_uart0,
&s3c24xx_clk_uart1,
&s3c24xx_clk_uart2,
&clk_rtc,
&clk_watchdog,
&clk_usb_bus_host,
&clk_usb_bus_gadget,
};
/* s3c2410_baseclk_add()
......@@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
{
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
struct clk *clkp;
struct clk *xtal;
int ret;
int ptr;
......@@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
/* register clocks from clock array */
clkp = init_clocks;
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
struct clk *clkp = init_clocks[ptr];
/* ensure that we note the clock state */
clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
......
......@@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
};
......
......@@ -29,6 +29,13 @@ config PLAT_S5P
help
Base platform code for Samsung's S5P series SoC.
config SAMSUNG_PM
bool
depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
default y
help
Base platform power management code for samsung code
if PLAT_SAMSUNG
# boot configurations
......
......@@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
......
......@@ -83,6 +83,11 @@ extern struct clk clk_ext;
extern struct clksrc_clk clk_epllref;
extern struct clksrc_clk clk_esysclk;
/* S3C24XX UART clocks */
extern struct clk s3c24xx_clk_uart0;
extern struct clk s3c24xx_clk_uart1;
extern struct clk s3c24xx_clk_uart2;
/* S3C64XX specific clocks */
extern struct clk clk_h2;
extern struct clk clk_27m;
......
......@@ -19,7 +19,7 @@
struct device;
#ifdef CONFIG_PM
#ifdef CONFIG_SAMSUNG_PM
extern __init int s3c_pm_init(void);
extern __init int s3c64xx_pm_init(void);
......@@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
extern void s3c_cpu_resume(void);
extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
......@@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
#ifdef CONFIG_PM
#ifdef CONFIG_SAMSUNG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
extern void s3c_cpu_resume(void);
#else
#define s3c_irq_wake NULL
#define s3c_irqext_wake NULL
#define s3c_cpu_resume NULL
#endif
/* PM debug functions */
......
......@@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot;
#ifdef CONFIG_SAMSUNG_PM_DEBUG
static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
static struct pm_uart_save uart_save;
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
......@@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_save_uarts(void)
{
struct pm_uart_save *save = uart_save;
unsigned int uart;
for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
s3c_pm_save_uart(uart, save);
s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
......@@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
static void s3c_pm_restore_uarts(void)
{
struct pm_uart_save *save = uart_save;
unsigned int uart;
for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
s3c_pm_restore_uart(uart, save);
s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
#else
static void s3c_pm_save_uarts(void) { }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment