Staging: ccg: delete it from the tree

Now that it isn't in the build, just delete the ccg driver from the tree
entirely.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/ccg/Kconfig

-if USB_GADGET
-
-config USB_G_CCG
-	tristate "Configurable Composite Gadget (STAGING)"
-	depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM && TTY
-	help
-	  The Configurable Composite Gadget supports multiple USB
-	  functions: acm, mass storage, rndis and FunctionFS.
-	  Each function can be configured and enabled/disabled
-	  dynamically from userspace through a sysfs interface.
-
-	  In order to compile this (either as a module or built-in),
-	  "USB Gadget Drivers" and anything under it must not be
-	  selected compiled-in in
-	  Device Drivers->USB Support->USB Gadget Support.
-	  However, you can say "M" there, if you do, the
-	  Configurable Composite Gadget can be compiled "M" only
-	  or not at all.
-
-	  BIG FAT NOTE: DON'T RELY ON THIS USERINTERFACE HERE! AS PART
-	  OF THE REWORK DONE HERE WILL BE A NEW USER INTERFACE WITHOUT ANY
-	  COMPATIBILITY TO THIS SYSFS INTERFACE HERE. BE AWARE OF THIS
-	  BEFORE SELECTING THIS.
-
-endif # USB_GADGET

drivers/staging/ccg/Makefile

-g_ccg-y				:= ccg.o
-obj-$(CONFIG_USB_G_CCG)		+= g_ccg.o

drivers/staging/ccg/TODO

-TODO:
-	- change configuration interface from sysfs to configfs
-
-Please send patches to Greg Kroah-Hartmann <gregkh@linuxfoundation.org>,
-Andrzej Pietrasiewicz <andrzej.p@samsung.com>, and
-Cc: Mike Lockwood <lockwood@android.com>

drivers/staging/ccg/config.c

-/*
- * usb/gadget/config.c -- simplify building config descriptors
- *
- * Copyright (C) 2003 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/string.h>
-#include <linux/device.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-
-/**
- * usb_descriptor_fillbuf - fill buffer with descriptors
- * @buf: Buffer to be filled
- * @buflen: Size of buf
- * @src: Array of descriptor pointers, terminated by null pointer.
- *
- * Copies descriptors into the buffer, returning the length or a
- * negative error code if they can't all be copied.  Useful when
- * assembling descriptors for an associated set of interfaces used
- * as part of configuring a composite device; or in other cases where
- * sets of descriptors need to be marshaled.
- */
-int
-usb_descriptor_fillbuf(void *buf, unsigned buflen,
-		const struct usb_descriptor_header **src)
-{
-	u8	*dest = buf;
-
-	if (!src)
-		return -EINVAL;
-
-	/* fill buffer from src[] until null descriptor ptr */
-	for (; NULL != *src; src++) {
-		unsigned		len = (*src)->bLength;
-
-		if (len > buflen)
-			return -EINVAL;
-		memcpy(dest, *src, len);
-		buflen -= len;
-		dest += len;
-	}
-	return dest - (u8 *)buf;
-}
-
-
-/**
- * usb_gadget_config_buf - builts a complete configuration descriptor
- * @config: Header for the descriptor, including characteristics such
- *	as power requirements and number of interfaces.
- * @desc: Null-terminated vector of pointers to the descriptors (interface,
- *	endpoint, etc) defining all functions in this device configuration.
- * @buf: Buffer for the resulting configuration descriptor.
- * @length: Length of buffer.  If this is not big enough to hold the
- *	entire configuration descriptor, an error code will be returned.
- *
- * This copies descriptors into the response buffer, building a descriptor
- * for that configuration.  It returns the buffer length or a negative
- * status code.  The config.wTotalLength field is set to match the length
- * of the result, but other descriptor fields (including power usage and
- * interface count) must be set by the caller.
- *
- * Gadget drivers could use this when constructing a config descriptor
- * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
- * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
- */
-int usb_gadget_config_buf(
-	const struct usb_config_descriptor	*config,
-	void					*buf,
-	unsigned				length,
-	const struct usb_descriptor_header	**desc
-)
-{
-	struct usb_config_descriptor		*cp = buf;
-	int					len;
-
-	/* config descriptor first */
-	if (length < USB_DT_CONFIG_SIZE || !desc)
-		return -EINVAL;
-	*cp = *config;
-
-	/* then interface/endpoint/class/vendor/... */
-	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
-			length - USB_DT_CONFIG_SIZE, desc);
-	if (len < 0)
-		return len;
-	len += USB_DT_CONFIG_SIZE;
-	if (len > 0xffff)
-		return -EINVAL;
-
-	/* patch up the config descriptor */
-	cp->bLength = USB_DT_CONFIG_SIZE;
-	cp->bDescriptorType = USB_DT_CONFIG;
-	cp->wTotalLength = cpu_to_le16(len);
-	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
-	return len;
-}
-
-/**
- * usb_copy_descriptors - copy a vector of USB descriptors
- * @src: null-terminated vector to copy
- * Context: initialization code, which may sleep
- *
- * This makes a copy of a vector of USB descriptors.  Its primary use
- * is to support usb_function objects which can have multiple copies,
- * each needing different descriptors.  Functions may have static
- * tables of descriptors, which are used as templates and customized
- * with identifiers (for interfaces, strings, endpoints, and more)
- * as needed by a given function instance.
- */
-struct usb_descriptor_header **
-usb_copy_descriptors(struct usb_descriptor_header **src)
-{
-	struct usb_descriptor_header **tmp;
-	unsigned bytes;
-	unsigned n_desc;
-	void *mem;
-	struct usb_descriptor_header **ret;
-
-	/* count descriptors and their sizes; then add vector size */
-	for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++)
-		bytes += (*tmp)->bLength;
-	bytes += (n_desc + 1) * sizeof(*tmp);
-
-	mem = kmalloc(bytes, GFP_KERNEL);
-	if (!mem)
-		return NULL;
-
-	/* fill in pointers starting at "tmp",
-	 * to descriptors copied starting at "mem";
-	 * and return "ret"
-	 */
-	tmp = mem;
-	ret = mem;
-	mem += (n_desc + 1) * sizeof(*tmp);
-	while (*src) {
-		memcpy(mem, *src, (*src)->bLength);
-		*tmp = mem;
-		tmp++;
-		mem += (*src)->bLength;
-		src++;
-	}
-	*tmp = NULL;
-
-	return ret;
-}
-

drivers/staging/ccg/gadget_chips.h

-/*
- * USB device controllers have lots of quirks.  Use these macros in
- * gadget drivers or other code that needs to deal with them, and which
- * autoconfigures instead of using early binding to the hardware.
- *
- * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
- * some config file that gets updated as new hardware is supported.
- * (And avoiding all runtime comparisons in typical one-choice configs!)
- *
- * NOTE:  some of these controller drivers may not be available yet.
- * Some are available on 2.4 kernels; several are available, but not
- * yet pushed in the 2.6 mainline tree.
- */
-
-#ifndef __GADGET_CHIPS_H
-#define __GADGET_CHIPS_H
-
-/*
- * NOTICE: the entries below are alphabetical and should be kept
- * that way.
- *
- * Always be sure to add new entries to the correct position or
- * accept the bashing later.
- *
- * If you have forgotten the alphabetical order let VIM/EMACS
- * do that for you.
- */
-#define gadget_is_amd5536udc(g)		(!strcmp("amd5536udc", (g)->name))
-#define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
-#define gadget_is_atmel_usba(g)		(!strcmp("atmel_usba_udc", (g)->name))
-#define gadget_is_bcm63xx(g)		(!strcmp("bcm63xx_udc", (g)->name))
-#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
-#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
-#define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
-#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
-#define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
-#define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
-#define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
-#define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
-#define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
-#define gadget_is_lpc32xx(g)		(!strcmp("lpc32xx_udc", (g)->name))
-#define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
-#define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
-#define gadget_is_net2272(g)		(!strcmp("net2272", (g)->name))
-#define gadget_is_net2280(g)		(!strcmp("net2280", (g)->name))
-#define gadget_is_omap(g)		(!strcmp("omap_udc", (g)->name))
-#define gadget_is_pch(g)		(!strcmp("pch_udc", (g)->name))
-#define gadget_is_pxa(g)		(!strcmp("pxa25x_udc", (g)->name))
-#define gadget_is_pxa27x(g)		(!strcmp("pxa27x_udc", (g)->name))
-#define gadget_is_r8a66597(g)		(!strcmp("r8a66597_udc", (g)->name))
-#define gadget_is_renesas_usbhs(g)	(!strcmp("renesas_usbhs_udc", (g)->name))
-#define gadget_is_s3c2410(g)		(!strcmp("s3c2410_udc", (g)->name))
-#define gadget_is_s3c_hsotg(g)		(!strcmp("s3c-hsotg", (g)->name))
-#define gadget_is_s3c_hsudc(g)		(!strcmp("s3c-hsudc", (g)->name))
-
-/**
- * usb_gadget_controller_number - support bcdDevice id convention
- * @gadget: the controller being driven
- *
- * Return a 2-digit BCD value associated with the peripheral controller,
- * suitable for use as part of a bcdDevice value, or a negative error code.
- *
- * NOTE:  this convention is purely optional, and has no meaning in terms of
- * any USB specification.  If you want to use a different convention in your
- * gadget driver firmware -- maybe a more formal revision ID -- feel free.
- *
- * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
- * to change their behavior accordingly.  For example it might help avoiding
- * some chip bug.
- */
-static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
-{
-	if (gadget_is_net2280(gadget))
-		return 0x01;
-	else if (gadget_is_dummy(gadget))
-		return 0x02;
-	else if (gadget_is_pxa(gadget))
-		return 0x03;
-	else if (gadget_is_goku(gadget))
-		return 0x06;
-	else if (gadget_is_omap(gadget))
-		return 0x08;
-	else if (gadget_is_pxa27x(gadget))
-		return 0x11;
-	else if (gadget_is_s3c2410(gadget))
-		return 0x12;
-	else if (gadget_is_at91(gadget))
-		return 0x13;
-	else if (gadget_is_imx(gadget))
-		return 0x14;
-	else if (gadget_is_musbhdrc(gadget))
-		return 0x16;
-	else if (gadget_is_atmel_usba(gadget))
-		return 0x18;
-	else if (gadget_is_fsl_usb2(gadget))
-		return 0x19;
-	else if (gadget_is_amd5536udc(gadget))
-		return 0x20;
-	else if (gadget_is_m66592(gadget))
-		return 0x21;
-	else if (gadget_is_fsl_qe(gadget))
-		return 0x22;
-	else if (gadget_is_ci13xxx_pci(gadget))
-		return 0x23;
-	else if (gadget_is_langwell(gadget))
-		return 0x24;
-	else if (gadget_is_r8a66597(gadget))
-		return 0x25;
-	else if (gadget_is_s3c_hsotg(gadget))
-		return 0x26;
-	else if (gadget_is_pch(gadget))
-		return 0x27;
-	else if (gadget_is_ci13xxx_msm(gadget))
-		return 0x28;
-	else if (gadget_is_renesas_usbhs(gadget))
-		return 0x29;
-	else if (gadget_is_s3c_hsudc(gadget))
-		return 0x30;
-	else if (gadget_is_net2272(gadget))
-		return 0x31;
-	else if (gadget_is_dwc3(gadget))
-		return 0x32;
-	else if (gadget_is_lpc32xx(gadget))
-		return 0x33;
-	else if (gadget_is_bcm63xx(gadget))
-		return 0x34;
-
-	return -ENOENT;
-}
-
-
-/**
- * gadget_supports_altsettings - return true if altsettings work
- * @gadget: the gadget in question
- */
-static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
-{
-	/* PXA 21x/25x/26x has no altsettings at all */
-	if (gadget_is_pxa(gadget))
-		return false;
-
-	/* PXA 27x and 3xx have *broken* altsetting support */
-	if (gadget_is_pxa27x(gadget))
-		return false;
-
-	/* Everything else is *presumably* fine ... */
-	return true;
-}
-
-#endif /* __GADGET_CHIPS_H */

drivers/staging/ccg/ndis.h

-/*
- * ndis.h
- *
- * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
- *
- * Thanks to the cygwin development team,
- * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
- *
- * THIS SOFTWARE IS NOT COPYRIGHTED
- *
- * This source code is offered for use in the public domain. You may
- * use, modify or distribute it freely.
- */
-
-#ifndef _LINUX_NDIS_H
-#define _LINUX_NDIS_H
-
-enum NDIS_DEVICE_POWER_STATE {
-	NdisDeviceStateUnspecified = 0,
-	NdisDeviceStateD0,
-	NdisDeviceStateD1,
-	NdisDeviceStateD2,
-	NdisDeviceStateD3,
-	NdisDeviceStateMaximum
-};
-
-struct NDIS_PM_WAKE_UP_CAPABILITIES {
-	enum NDIS_DEVICE_POWER_STATE  MinMagicPacketWakeUp;
-	enum NDIS_DEVICE_POWER_STATE  MinPatternWakeUp;
-	enum NDIS_DEVICE_POWER_STATE  MinLinkChangeWakeUp;
-};
-
-struct NDIS_PNP_CAPABILITIES {
-	__le32					Flags;
-	struct NDIS_PM_WAKE_UP_CAPABILITIES	WakeUpCapabilities;
-};
-
-struct NDIS_PM_PACKET_PATTERN {
-	__le32	Priority;
-	__le32	Reserved;
-	__le32	MaskSize;
-	__le32	PatternOffset;
-	__le32	PatternSize;
-	__le32	PatternFlags;
-};
-
-#endif /* _LINUX_NDIS_H */