regulator: da9211: Remove unnecessary devm_regulator_unregister() calls

Current code uses devm_regulator_register(), so the resource management code
will ensure that the resource is freed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

drivers/regulator/da9211-regulator.c

@@ -245,7 +245,7 @@ static int da9211_regulator_init(struct da9211 *chip)
 	ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data);
 	if (ret < 0) {
 		dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	data &= DA9211_SLAVE_SEL;
@@ -259,9 +259,8 @@ static int da9211_regulator_init(struct da9211 *chip)
 		else
 			chip->num_regulator = 2;
 	} else {
-		ret = -EINVAL;
 		dev_err(chip->dev, "Configuration is mismatched\n");
-		goto err;
+		return -EINVAL;
 	}
 
 	for (i = 0; i < chip->num_regulator; i++) {
@@ -278,8 +277,7 @@ static int da9211_regulator_init(struct da9211 *chip)
 		if (IS_ERR(chip->rdev[i])) {
 			dev_err(chip->dev,
 				"Failed to register DA9211 regulator\n");
-			ret = PTR_ERR(chip->rdev[i]);
-			goto err_regulator;
+			return PTR_ERR(chip->rdev[i]);
 		}
 
 		if (chip->chip_irq != 0) {
@@ -288,18 +286,12 @@ static int da9211_regulator_init(struct da9211 *chip)
 			if (ret < 0) {
 				dev_err(chip->dev,
 					"Failed to update mask reg: %d\n", ret);
-				goto err_regulator;
+				return ret;
 			}
 		}
 	}
 
 	return 0;
-
-err_regulator:
-	while (--i >= 0)
-		devm_regulator_unregister(chip->dev, chip->rdev[i]);
-err:
-	return ret;
 }
 /*
  * I2C driver interface functions
@@ -353,17 +345,6 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 	return ret;
 }
 
-static int da9211_i2c_remove(struct i2c_client *i2c)
-{
-	struct da9211 *chip = i2c_get_clientdata(i2c);
-	int i;
-
-	for (i = 0; i < chip->num_regulator; i++)
-		devm_regulator_unregister(chip->dev, chip->rdev[i]);
-
-	return 0;
-}
-
 static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", 0},
 	{},
@@ -377,7 +358,6 @@ static struct i2c_driver da9211_regulator_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = da9211_i2c_probe,
-	.remove = da9211_i2c_remove,
 	.id_table = da9211_i2c_id,
 };