Skip to content

L
linux
Commit 519183af authored by Bjorn Andersson's avatar Bjorn Andersson
Browse files
Options

arm64: dts: qcom: add SA8540P and ADP 

Introduce the Qualcomm SA8540P automotive platform and the SA8295P ADP
development board.

The SA8540P and SC8280XP are fairly similar, so the SA8540P is built
ontop of the SC8280XP dtsi to reduce duplication. As more advanced
features are integrated this might be re-evaluated.

This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh
regulators, debug UART, PMICs, remoteprocs (NSPs crashes shortly after
booting) and USB.

The SA8295P ADP contains four PM8450 PMICs, which according to their
revid are compatible with PM8150. They are defined within the ADP for
now, to avoid creating additional .dtsi files for PM8150 with just
addresses changed - and to allow using the labels from the schematics.
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: default avatarJohan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-6-bjorn.andersson@linaro.org
parent ccd3517f
Hide whitespace changes
Inline Side-by-side
Showing with 523 additions and 0 deletions
arch/arm64/boot/dts/qcom/Makefile
View file @ 519183af
...@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb ...@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
......
arch/arm64/boot/dts/qcom/sa8295p-adp.dts 0 → 100644
View file @ 519183af
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
* Copyright (c) 2022, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/spmi/spmi.h>
#include "sa8540p.dtsi"
/ {
model = "Qualcomm SA8295P ADP";
compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
aliases {
serial0 = &qup2_uart17;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&apps_rsc {
pmm8540-a-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_l3a: ldo3 {
regulator-name = "vreg_l3a";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l5a: ldo5 {
regulator-name = "vreg_l5a";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7a: ldo7 {
regulator-name = "vreg_l7a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l13a: ldo13 {
regulator-name = "vreg_l13a";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
};
pmm8540-c-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "c";
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l2c: ldo2 {
regulator-name = "vreg_l2c";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l3c: ldo3 {
regulator-name = "vreg_l3c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l6c: ldo6 {
regulator-name = "vreg_l6c";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7c: ldo7 {
regulator-name = "vreg_l7c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l10c: ldo10 {
regulator-name = "vreg_l10c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l17c: ldo17 {
regulator-name = "vreg_l17c";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
};
pmm8540-g-regulators {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "g";
vreg_l3g: ldo3 {
regulator-name = "vreg_l3g";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7g: ldo7 {
regulator-name = "vreg_l7g";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
};
};
&qup2 {
status = "okay";
};
&qup2_uart17 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sa8540p/adsp.mbn";
status = "okay";
};
&remoteproc_nsp0 {
firmware-name = "qcom/sa8540p/cdsp.mbn";
status = "okay";
};
&remoteproc_nsp1 {
firmware-name = "qcom/sa8540p/cdsp1.mbn";
status = "okay";
};
&spmi_bus {
pm8450a: pmic@0 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450a_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8450c: pmic@4 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450c_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8450e: pmic@8 {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450e_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8450g: pmic@c {
compatible = "qcom,pm8150", "qcom,spmi-pmic";
reg = <0xc SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8450g_gpios: gpio@c000 {
compatible = "qcom,pm8150-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
&ufs_mem_hc {
reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17c>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l6c>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&ufs_card_hc {
reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l10c>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l3c>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_card_phy {
vdda-phy-supply = <&vreg_l8g>;
vdda-pll-supply = <&vreg_l3g>;
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_0_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "peripheral";
};
&usb_0_hsphy {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7a>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_0_qmpphy {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "host";
};
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l1c>;
vdda18-supply = <&vreg_l7c>;
vdda33-supply = <&vreg_l2c>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l4c>;
vdda-pll-supply = <&vreg_l1c>;
status = "okay";
};
&usb_2_hsphy0 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy1 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy2 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_hsphy3 {
vdda-pll-supply = <&vreg_l5a>;
vdda18-supply = <&vreg_l7g>;
vdda33-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2_qmpphy0 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&usb_2_qmpphy1 {
vdda-phy-supply = <&vreg_l3a>;
vdda-pll-supply = <&vreg_l5a>;
status = "okay";
};
&xo_board_clk {
clock-frequency = <38400000>;
};
/* PINCTRL */
arch/arm64/boot/dts/qcom/sa8540p.dtsi 0 → 100644
View file @ 519183af
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
* Copyright (c) 2022, Linaro Limited
*/
#include "sc8280xp.dtsi"
/delete-node/ &cpu0_opp_table;
/delete-node/ &cpu4_opp_table;
/ {
cpu0_opp_table: cpu0-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
};
opp-499200000 {
opp-hz = /bits/ 64 <499200000>;
};
opp-595200000 {
opp-hz = /bits/ 64 <595200000>;
};
opp-710400000 {
opp-hz = /bits/ 64 <710400000>;
};
opp-806400000 {
opp-hz = /bits/ 64 <806400000>;
};
opp-902400000 {
opp-hz = /bits/ 64 <902400000>;
};
opp-1017600000 {
opp-hz = /bits/ 64 <1017600000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
};
opp-1209600000 {
opp-hz = /bits/ 64 <1209600000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
};
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
};
opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
};
opp-1670400000 {
opp-hz = /bits/ 64 <1670400000>;
};
opp-1785600000 {
opp-hz = /bits/ 64 <1785600000>;
};
opp-1881600000 {
opp-hz = /bits/ 64 <1881600000>;
};
opp-2016000000 {
opp-hz = /bits/ 64 <2016000000>;
};
opp-2131200000 {
opp-hz = /bits/ 64 <2131200000>;
};
opp-2246400000 {
opp-hz = /bits/ 64 <2246400000>;
};
};
cpu4_opp_table: cpu4-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
};
opp-1171200000 {
opp-hz = /bits/ 64 <1171200000>;
};
opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
};
opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
};
opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
};
opp-1747200000 {
opp-hz = /bits/ 64 <1747200000>;
};
opp-1862400000 {
opp-hz = /bits/ 64 <1862400000>;
};
opp-1977600000 {
opp-hz = /bits/ 64 <1977600000>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
};
opp-2169600000 {
opp-hz = /bits/ 64 <2169600000>;
};
opp-2284800000 {
opp-hz = /bits/ 64 <2284800000>;
};
opp-2380800000 {
opp-hz = /bits/ 64 <2380800000>;
};
opp-2496000000 {
opp-hz = /bits/ 64 <2496000000>;
};
opp-2592000000 {
opp-hz = /bits/ 64 <2592000000>;
};
};
};
&rpmhpd {
compatible = "qcom,sa8540p-rpmhpd";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7