ACPI / gpio: Add irq_type when a GPIO is used as an interrupt

When a GPIO is used as an interrupt in ACPI, the irq_type was not
available for device driver.

Make available polarity and triggering information in acpi_find_gpio by
renaming acpi_gpio_info field active_low  to polarity and adding triggering
field (edge/level).

For sanity, in gpiolib.c replace info.active_low by
"info.polarity == GPIO_ACTIVE_LOW".

Set the irq_type if necessary in acpi_dev_gpio_irq_get.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/gpio/gpiolib-acpi.c

@@ -417,10 +417,15 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
 		 * ActiveLow is only specified for GpioInt resource. If
 		 * GpioIo is used then the only way to set the flag is
 		 * to use _DSD "gpios" property.
+		 * Note: we expect here:
+		 * - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW
+		 * - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
 		 */
-		if (lookup->info.gpioint)
-			lookup->info.active_low =
-				agpio->polarity == ACPI_ACTIVE_LOW;
+		if (lookup->info.gpioint) {
+			lookup->info.polarity = agpio->polarity;
+			lookup->info.triggering = agpio->triggering;
+		}
+
 	}
 
 	return 1;
@@ -447,7 +452,7 @@ static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup,
 	if (info) {
 		*info = lookup->info;
 		if (lookup->active_low)
-			info->active_low = lookup->active_low;
+			info->polarity = lookup->active_low;
 	}
 	return 0;
 }
@@ -595,6 +600,7 @@ struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
 int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 {
 	int idx, i;
+	unsigned int irq_flags;
 
 	for (i = 0, idx = 0; idx <= index; i++) {
 		struct acpi_gpio_info info;
@@ -603,8 +609,23 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 		desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
 		if (IS_ERR(desc))
 			break;
-		if (info.gpioint && idx++ == index)
-			return gpiod_to_irq(desc);
+		if (info.gpioint && idx++ == index) {
+			int irq = gpiod_to_irq(desc);
+
+			if (irq < 0)
+				return irq;
+
+			irq_flags = acpi_dev_get_irq_type(info.triggering,
+							  info.polarity);
+
+			/* Set type if specified and different than the current one */
+			if (irq_flags != IRQ_TYPE_NONE &&
+			    irq_flags != irq_get_trigger_type(irq))
+				irq_set_irq_type(irq, irq_flags);
+
+			return irq;
+		}
+
 	}
 	return -ENOENT;
 }

drivers/gpio/gpiolib.c

@@ -1879,7 +1879,7 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
 			return desc;
 	}
 
-	if (info.active_low)
+	if (info.polarity == GPIO_ACTIVE_LOW)
 		*flags |= GPIO_ACTIVE_LOW;
 
 	return desc;
@@ -2217,7 +2217,7 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
 
 		desc = acpi_node_get_gpiod(fwnode, propname, 0, &info);
 		if (!IS_ERR(desc))
-			active_low = info.active_low;
+			active_low = info.polarity == GPIO_ACTIVE_LOW;
 	}
 
 	if (IS_ERR(desc))

drivers/gpio/gpiolib.h

@@ -26,7 +26,8 @@ struct acpi_device;
  */
 struct acpi_gpio_info {
 	bool gpioint;
-	bool active_low;
+	int polarity;
+	int triggering;
 };
 
 /* gpio suffixes used for ACPI and device tree lookup */