Merge branch 'dsa2-pdata'

Florian Fainelli says:

====================
net: dsa: Support for pdata in dsa2

This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).

We would probably want the whole series to be merged via David Miller's tree
to simplify things.

Thanks!

Changes in v5:

- dropped changes to drivers/base/ because after more than a month, we cannot
  get any answer from Greg KH

Changes in v4:

- Changed device_find_class() to device_find_in_class_name()
- Added kerneldoc above device_find_in_class_name() to explain what it does
  and the calling convention regarding device reference counts
- Changed dev_to_net_device to device_to_net_device() added comments
  about what it does and the caller conventions regarding reference counts

Changes in v3:

- Tested EPROBE_DEFER from a mockup MDIO/DSA switch driver and everything
  is fine, once the driver finally probes we have access to platform data
  as expected

- added comment above dsa_port_is_valid() that port->name is mandatory
  for platform data cases

- added an extra check in dsa_parse_member() for a NULL pdata pointer

- fixed a bunch of checkpatch errors and warnings

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to
  allow us to do exaclty the same things with platform data and Device Tree
  we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate
  platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm/mach-orion5x/common.c

@@ -105,7 +105,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
+void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
 {
 	orion_ge00_switch_init(d);
 }

arch/arm/mach-orion5x/common.h

@@ -3,7 +3,7 @@
 
 #include <linux/reboot.h>
 
-struct dsa_platform_data;
+struct dsa_chip_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d);
+void orion5x_eth_switch_init(struct dsa_chip_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

@@ -101,11 +101,6 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_fxo_switch_chip_data,
-};
-
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -120,7 +115,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

@@ -102,11 +102,6 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_ge_switch_chip_data,
-};
-
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -125,7 +120,7 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 

arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c

@@ -40,11 +40,6 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
 	.port_names[5]	= "cpu",
 };
 
-static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f6183ap_ge_switch_chip_data,
-};
-
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@@ -89,7 +84,7 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();

arch/arm/mach-orion5x/wnr854t-setup.c

@@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_plat_data);
+	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -191,11 +191,6 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
 	.port_names[7]	= "lan4",
 };
 
-static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &wrt350n_v2_switch_chip_data,
-};
-
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -210,7 +205,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

arch/arm/plat-orion/common.c

@@ -22,6 +22,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
+#include <linux/phy.h>
 
 /* Create a clkdev entry for a given device/clk */
 void __init orion_clkdev_add(const char *con_id, const char *dev_id,
@@ -470,15 +471,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion_ge00_switch_init(struct dsa_platform_data *d)
+static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
+static __initdata struct mdio_board_info
+		  orion_ge00_switch_board_info;
+
+void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	int i;
+	struct mdio_board_info *bd;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
+		if (!strcmp(d->port_names[i], "cpu"))
+			break;
 
-	d->netdev = &orion_ge00.dev;
-	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
+	bd = &orion_ge00_switch_board_info;
+	bd->bus_id = orion_ge00_mvmdio_bus_name;
+	bd->mdio_addr = d->sw_addr;
+	d->netdev[i] = &orion_ge00.dev;
+	strcpy(bd->modalias, "mv88e6085");
+	bd->platform_data = d;
 
-	platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
+	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }
 
 /*****************************************************************************

arch/arm/plat-orion/include/plat/common.h

@@ -12,7 +12,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 
-struct dsa_platform_data;
+struct dsa_chip_data;
 struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
@@ -57,7 +57,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_platform_data *d);
+void __init orion_ge00_switch_init(struct dsa_chip_data *d);
 
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,

drivers/net/phy/Makefile

 # Makefile for Linux PHY drivers and MDIO bus drivers
 
-libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o
+libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o \
+				   mdio-boardinfo.o
 libphy-$(CONFIG_SWPHY)		+= swphy.o
 libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_led_triggers.o
 

drivers/net/phy/mdio-boardinfo.c

+/*
+ * mdio-boardinfo - Collect pre-declarations for MDIO devices
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+
+#include "mdio-boardinfo.h"
+
+static LIST_HEAD(mdio_board_list);
+static DEFINE_MUTEX(mdio_board_lock);
+
+/**
+ * mdiobus_setup_mdiodev_from_board_info - create and setup MDIO devices
+ * from pre-collected board specific MDIO information
+ * @mdiodev: MDIO device pointer
+ * Context: can sleep
+ */
+void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus)
+{
+	struct mdio_board_entry *be;
+	struct mdio_device *mdiodev;
+	struct mdio_board_info *bi;
+	int ret;
+
+	mutex_lock(&mdio_board_lock);
+	list_for_each_entry(be, &mdio_board_list, list) {
+		bi = &be->board_info;
+
+		if (strcmp(bus->id, bi->bus_id))
+			continue;
+
+		mdiodev = mdio_device_create(bus, bi->mdio_addr);
+		if (IS_ERR(mdiodev))
+			continue;
+
+		strncpy(mdiodev->modalias, bi->modalias,
+			sizeof(mdiodev->modalias));
+		mdiodev->bus_match = mdio_device_bus_match;
+		mdiodev->dev.platform_data = (void *)bi->platform_data;
+
+		ret = mdio_device_register(mdiodev);
+		if (ret) {
+			mdio_device_free(mdiodev);
+			continue;
+		}
+	}
+	mutex_unlock(&mdio_board_lock);
+}
+
+/**
+ * mdio_register_board_info - register MDIO devices for a given board
+ * @info: array of devices descriptors
+ * @n: number of descriptors provided
+ * Context: can sleep
+ *
+ * The board info passed can be marked with __initdata but be pointers
+ * such as platform_data etc. are copied as-is
+ */
+int mdiobus_register_board_info(const struct mdio_board_info *info,
+				unsigned int n)
+{
+	struct mdio_board_entry *be;
+	unsigned int i;
+
+	be = kcalloc(n, sizeof(*be), GFP_KERNEL);
+	if (!be)
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++, be++, info++) {
+		memcpy(&be->board_info, info, sizeof(*info));
+		mutex_lock(&mdio_board_lock);
+		list_add_tail(&be->list, &mdio_board_list);
+		mutex_unlock(&mdio_board_lock);
+	}
+
+	return 0;
+}

drivers/net/phy/mdio-boardinfo.h

+/*
+ * mdio-boardinfo.h - board info interface internal to the mdio_bus
+ * component
+ */
+
+#ifndef __MDIO_BOARD_INFO_H
+#define __MDIO_BOARD_INFO_H
+
+#include <linux/phy.h>
+#include <linux/mutex.h>
+
+struct mdio_board_entry {
+	struct list_head	list;
+	struct mdio_board_info	board_info;
+};
+
+void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus);
+
+#endif /* __MDIO_BOARD_INFO_H */

drivers/net/phy/mdio_bus.c

@@ -41,6 +41,8 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/mdio.h>
 
+#include "mdio-boardinfo.h"
+
 int mdiobus_register_device(struct mdio_device *mdiodev)
 {
 	if (mdiodev->bus->mdio_map[mdiodev->addr])
@@ -343,6 +345,8 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		}
 	}
 
+	mdiobus_setup_mdiodev_from_board_info(bus);
+
 	bus->state = MDIOBUS_REGISTERED;
 	pr_info("%s: probed\n", bus->name);
 	return 0;

drivers/net/phy/mdio_device.c

@@ -34,6 +34,17 @@ static void mdio_device_release(struct device *dev)
 	kfree(to_mdio_device(dev));
 }
 
+int mdio_device_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct mdio_device *mdiodev = to_mdio_device(dev);
+	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
+
+	if (mdiodrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY)
+		return 0;
+
+	return strcmp(mdiodev->modalias, drv->name) == 0;
+}
+
 struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr)
 {
 	struct mdio_device *mdiodev;

include/linux/mdio.h

@@ -10,6 +10,7 @@
 #define __LINUX_MDIO_H__
 
 #include <uapi/linux/mdio.h>
+#include <linux/mod_devicetable.h>
 
 struct mii_bus;
 
@@ -29,6 +30,7 @@ struct mdio_device {
 
 	const struct dev_pm_ops *pm_ops;
 	struct mii_bus *bus;
+	char modalias[MDIO_NAME_SIZE];
 
 	int (*bus_match)(struct device *dev, struct device_driver *drv);
 	void (*device_free)(struct mdio_device *mdiodev);
@@ -71,6 +73,7 @@ int mdio_device_register(struct mdio_device *mdiodev);
 void mdio_device_remove(struct mdio_device *mdiodev);
 int mdio_driver_register(struct mdio_driver *drv);
 void mdio_driver_unregister(struct mdio_driver *drv);
+int mdio_device_bus_match(struct device *dev, struct device_driver *drv);
 
 static inline bool mdio_phy_id_is_c45(int phy_id)
 {

include/linux/mod_devicetable.h

@@ -501,6 +501,7 @@ struct platform_device_id {
 	kernel_ulong_t driver_data;
 };
 
+#define MDIO_NAME_SIZE		32
 #define MDIO_MODULE_PREFIX	"mdio:"
 
 #define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"

include/linux/phy.h

@@ -886,6 +886,25 @@ void mdio_bus_exit(void);
 
 extern struct bus_type mdio_bus_type;
 
+struct mdio_board_info {
+	const char	*bus_id;
+	char		modalias[MDIO_NAME_SIZE];
+	int		mdio_addr;
+	const void	*platform_data;
+};
+
+#if IS_ENABLED(CONFIG_PHYLIB)
+int mdiobus_register_board_info(const struct mdio_board_info *info,
+				unsigned int n);
+#else
+static inline int mdiobus_register_board_info(const struct mdio_board_info *i,
+					      unsigned int n)
+{
+	return 0;
+}
+#endif
+
+
 /**
  * module_phy_driver() - Helper macro for registering PHY drivers
  * @__phy_drivers: array of PHY drivers to register

include/net/dsa.h

@@ -45,6 +45,11 @@ struct dsa_chip_data {
 	struct device	*host_dev;
 	int		sw_addr;
 
+	/*
+	 * Reference to network devices
+	 */
+	struct device	*netdev[DSA_MAX_PORTS];
+
 	/* set to size of eeprom if supported by the switch */
 	int		eeprom_len;
 
@@ -170,6 +175,7 @@ struct dsa_mall_tc_entry {
 struct dsa_port {
 	struct dsa_switch	*ds;
 	unsigned int		index;
+	const char		*name;
 	struct net_device	*netdev;
 	struct device_node	*dn;
 	unsigned int		ageing_time;
@@ -445,6 +451,7 @@ struct dsa_switch_driver {
 void register_switch_driver(struct dsa_switch_driver *type);
 void unregister_switch_driver(struct dsa_switch_driver *type);
 struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev);
+struct net_device *dsa_dev_to_net_device(struct device *dev);
 
 static inline bool dsa_uses_tagged_protocol(struct dsa_switch_tree *dst)
 {

net/dsa/dsa.c

@@ -492,7 +492,7 @@ struct mii_bus *dsa_host_dev_to_mii_bus(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dsa_host_dev_to_mii_bus);
 
-static struct net_device *dev_to_net_device(struct device *dev)
+struct net_device *dsa_dev_to_net_device(struct device *dev)
 {
 	struct device *d;
 
@@ -509,6 +509,7 @@ static struct net_device *dev_to_net_device(struct device *dev)
 
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(dsa_dev_to_net_device);
 
 #ifdef CONFIG_OF
 static int dsa_of_setup_routing_table(struct dsa_platform_data *pd,
@@ -817,7 +818,7 @@ static int dsa_probe(struct platform_device *pdev)
 		dev = pd->of_netdev;
 		dev_hold(dev);
 	} else {
-		dev = dev_to_net_device(pd->netdev);
+		dev = dsa_dev_to_net_device(pd->netdev);
 	}
 	if (dev == NULL) {
 		ret = -EPROBE_DEFER;

net/dsa/dsa2.c

@@ -78,18 +78,27 @@ static void dsa_dst_del_ds(struct dsa_switch_tree *dst,
 	kref_put(&dst->refcount, dsa_free_dst);
 }
 
+/* For platform data configurations, we need to have a valid name argument to
+ * differentiate a disabled port from an enabled one
+ */
 static bool dsa_port_is_valid(struct dsa_port *port)
 {
-	return !!port->dn;
+	return !!(port->dn || port->name);
 }
 
 static bool dsa_port_is_dsa(struct dsa_port *port)
 {
+	if (port->name && !strcmp(port->name, "dsa"))
+		return true;
+	else
 		return !!of_parse_phandle(port->dn, "link", 0);
 }
 
 static bool dsa_port_is_cpu(struct dsa_port *port)
 {
+	if (port->name && !strcmp(port->name, "cpu"))
+		return true;
+	else
 		return !!of_parse_phandle(port->dn, "ethernet", 0);
 }
 
@@ -250,9 +259,10 @@ static void dsa_cpu_port_unapply(struct dsa_port *port, u32 index,
 static int dsa_user_port_apply(struct dsa_port *port, u32 index,
 			       struct dsa_switch *ds)
 {
-	const char *name;
+	const char *name = port->name;
 	int err;
 
+	if (port->dn)
 		name = of_get_property(port->dn, "label", NULL);
 	if (!name)
 		name = "eth%d";
@@ -444,11 +454,16 @@ static int dsa_cpu_parse(struct dsa_port *port, u32 index,
 	struct net_device *ethernet_dev;
 	struct device_node *ethernet;
 
+	if (port->dn) {
 		ethernet = of_parse_phandle(port->dn, "ethernet", 0);
 		if (!ethernet)
 			return -EINVAL;
-
 		ethernet_dev = of_find_net_device_by_node(ethernet);
+	} else {
+		ethernet_dev = dsa_dev_to_net_device(ds->cd->netdev[index]);
+		dev_put(ethernet_dev);
+	}
+
 	if (!ethernet_dev)
 		return -EPROBE_DEFER;
 
@@ -551,6 +566,33 @@ static int dsa_parse_ports_dn(struct device_node *ports, struct dsa_switch *ds)
 	return 0;
 }
 
+static int dsa_parse_ports(struct dsa_chip_data *cd, struct dsa_switch *ds)
+{
+	bool valid_name_found = false;
+	unsigned int i;
+
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		if (!cd->port_names[i])
+			continue;
+
+		ds->ports[i].name = cd->port_names[i];
+
+		/* Initialize enabled_port_mask now for drv->setup()
+		 * to have access to a correct value, just like what
+		 * net/dsa/dsa.c::dsa_switch_setup_one does.
+		 */
+		if (!dsa_port_is_cpu(&ds->ports[i]))
+			ds->enabled_port_mask |= 1 << i;
+
+		valid_name_found = true;
+	}
+
+	if (!valid_name_found && i == DSA_MAX_PORTS)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
 {
 	int err;
@@ -575,6 +617,18 @@ static int dsa_parse_member_dn(struct device_node *np, u32 *tree, u32 *index)
 	return 0;
 }
 
+static int dsa_parse_member(struct dsa_chip_data *pd, u32 *tree, u32 *index)
+{
+	if (!pd)
+		return -ENODEV;
+
+	/* We do not support complex trees with dsa_chip_data */
+	*tree = 0;
+	*index = 0;
+
+	return 0;
+}
+
 static struct device_node *dsa_get_ports(struct dsa_switch *ds,
 					 struct device_node *np)
 {
@@ -591,12 +645,14 @@ static struct device_node *dsa_get_ports(struct dsa_switch *ds,
 
 static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
 {
+	struct dsa_chip_data *pdata = dev->platform_data;
 	struct device_node *np = dev->of_node;
 	struct dsa_switch_tree *dst;
 	struct device_node *ports;
 	u32 tree, index;
 	int i, err;
 
+	if (np) {
 		err = dsa_parse_member_dn(np, &tree, &index);
 		if (err)
 			return err;
@@ -608,6 +664,15 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
 		err = dsa_parse_ports_dn(ports, ds);
 		if (err)
 			return err;
+	} else {
+		err = dsa_parse_member(pdata, &tree, &index);
+		if (err)
+			return err;
+
+		err = dsa_parse_ports(pdata, ds);
+		if (err)
+			return err;
+	}
 
 	dst = dsa_get_dst(tree);
 	if (!dst) {
@@ -623,6 +688,7 @@ static int _dsa_register_switch(struct dsa_switch *ds, struct device *dev)
 
 	ds->dst = dst;
 	ds->index = index;
+	ds->cd = pdata;
 
 	/* Initialize the routing table */
 	for (i = 0; i < DSA_MAX_SWITCHES; ++i)