Skip to content

L
linux
Commit 5282da45 authored by Linus Walleij's avatar Linus Walleij
Browse files
Options

ARM: dts: ux500: Push VMMCI down to each tree 

The setting of VMMCI differs so much between different
boards that we need to handle it on a per-board basis
rather that complicating things by overriding stuff from
the included DTSI:s. Push it down into top-level tree
instead.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent ace79dd1
Hide whitespace changes
Inline Side-by-side
Showing with 153 additions and 42 deletions
arch/arm/boot/dts/ste-href.dtsi
View file @ 5282da45
......@@ -113,21 +113,6 @@ i2c@80110000 {
status = "okay";
};
/* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
states = <1800000 0x1
2900000 0x0>;
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
......
arch/arm/boot/dts/ste-href520-tvk.dts
View file @ 5282da45
......@@ -12,11 +12,43 @@ / {
model = "ST-Ericsson HREF520 and TVK1281618 UIB";
compatible = "st-ericsson,href520", "st-ericsson,u8500";
soc {
vmmci: regulator-gpio {
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
/* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
states = <1800000 0x1
2900000 0x0>;
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&vmmci_default_mode>;
};
};
&pinctrl {
vmmci {
vmmci_default_mode: vmmc_default {
/* VMMCI level-shifter enable */
default_href520_cfg1 {
pins = "GPIO78_F4";
ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_href520_cfg2 {
pins = "GPIO5_AG6";
ste,config = <&gpio_out_hi>;
};
};
};
};
arch/arm/boot/dts/ste-hrefprev60-stuib.dts
View file @ 5282da45
......@@ -12,6 +12,25 @@ / {
model = "ST-Ericsson HREF (pre-v60) and ST UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
/* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
states = <1800000 0x1
2900000 0x0>;
gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
......
arch/arm/boot/dts/ste-hrefprev60-tvk.dts
View file @ 5282da45
......@@ -11,4 +11,23 @@
/ {
model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
/* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
states = <1800000 0x1
2900000 0x0>;
gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
arch/arm/boot/dts/ste-hrefprev60.dtsi
View file @ 5282da45
......@@ -65,12 +65,6 @@ sdi0_per1@80126000 {
cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
};
vmmci: regulator-gpio {
gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
pinctrl {
/* Set this up using hogs */
pinctrl-names = "default";
......
arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
View file @ 5282da45
......@@ -14,6 +14,28 @@ / {
model = "ST-Ericsson HREF (v60+) and ST UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
/* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
states = <1800000 0x1
2900000 0x0>;
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&vmmci_default_mode>;
};
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
......@@ -33,3 +55,20 @@ bu21013_tp@5d {
};
};
};
&pinctrl {
vmmci {
vmmci_default_mode: vmmc_default {
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
pins = "GPIO5_AG6";
ste,config = <&gpio_out_hi>;
};
};
};
};
arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
View file @ 5282da45
......@@ -13,4 +13,43 @@
/ {
model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
/* ST6G3244ME level translator for 1.8/2.9 V */
vmmci: regulator-gpio {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
states = <1800000 0x1
2900000 0x0>;
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&vmmci_default_mode>;
};
};
&pinctrl {
vmmci {
vmmci_default_mode: vmmc_default {
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
pins = "GPIO5_AG6";
ste,config = <&gpio_out_hi>;
};
};
};
};
arch/arm/boot/dts/ste-hrefv60plus.dtsi
View file @ 5282da45
......@@ -194,12 +194,6 @@ sdi0_per1@80126000 {
cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
};
vmmci: regulator-gpio {
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
pinctrl {
/*
* Set this up using hogs, as time goes by and as seems fit, these
......@@ -224,16 +218,6 @@ default_hrefv60_cfg1 {
pins = "GPIO95_E8";
ste,config = <&gpio_in_pu>;
};
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
pins = "GPIO5_AG6";
ste,config = <&gpio_out_hi>;
};
};
};
ipgpio {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7