mdio: Add register definitions for MDIO (clause 45)

IEEE 802.3 clause 45 specifies the MDIO interface and registers for
use in 10G and other PHYs, similar to the MII management interface.

PHYs may have up to 32 MMDs corresponding to different sub-layers and
functions, each with up to 65536 registers.  These are addressed by
PRTAD (similar to the MII PHY address) and DEVAD.  Define a mapping
for specifying PRTAD and DEVAD through the existing MII ioctls.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

include/linux/mdio.h

+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+static inline bool mdio_phy_id_is_c45(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
+}
+
+static inline __u16 mdio_phy_id_prtad(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+}
+
+static inline __u16 mdio_phy_id_devad(int phy_id)
+{
+	return phy_id & MDIO_PHY_ID_DEVAD;
+}
+
+#endif /* __LINUX_MDIO_H__ */