i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()

Instead of open coded variant switch to use i2c_new_ccgx_ucsi().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/Kconfig

@@ -590,6 +590,7 @@ config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
 	select I2C_DESIGNWARE_CORE
+	select I2C_CCGX_UCSI
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 
 #include "i2c-designware-core.h"
+#include "i2c-ccgx-ucsi.h"
 
 #define DRIVER_NAME "i2c-designware-pci"
 #define AMD_CLK_RATE_HZ	100000
@@ -125,26 +126,6 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 	return -ENODEV;
 }
 
- /*
-  * TODO find a better way how to deduplicate instantiation
-  * of USB PD slave device from nVidia GPU driver.
-  */
-static int navi_amd_register_client(struct dw_i2c_dev *dev)
-{
-	struct i2c_board_info	info;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	strscpy(info.type, "ccgx-ucsi", I2C_NAME_SIZE);
-	info.addr = 0x08;
-	info.irq = dev->irq;
-
-	dev->slave = i2c_new_client_device(&dev->adapter, &info);
-	if (IS_ERR(dev->slave))
-		return PTR_ERR(dev->slave);
-
-	return 0;
-}
-
 static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
@@ -325,11 +306,10 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	}
 
 	if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
-		r = navi_amd_register_client(dev);
-		if (r) {
-			dev_err(dev->dev, "register client failed with %d\n", r);
-			return r;
-		}
+		dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL);
+		if (IS_ERR(dev->slave))
+			return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
+					     "register UCSI failed\n");
 	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);