Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver core: fix 'dynamic_debug' cmd line parameter
  HOWTO: Sync patch for jp_JP/HOWTO
  Update stable tree documentation
  sysfs: Fix return values for sysdev_store_{ulong,int}
  driver core: drivers/base/sys.c: update comments
  Document kernel taint flags properly

Documentation/ja_JP/HOWTO

@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2008/08/21
+Last Updated: 2008/10/24
 ==================================
 これは、
-linux-2.6.27/Documentation/HOWTO
+linux-2.6.28/Documentation/HOWTO
 の和訳です。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/8/5
+翻訳日： 2008/10/24
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -110,8 +110,8 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを
 新しいドキュメントファイルも追加することを勧めます。
 カーネルの変更が、カーネルがユーザ空間に公開しているインターフェイスの
 変更を引き起こす場合、その変更を説明するマニュアルページのパッチや情報
-をマニュアルページのメンテナ mtk.manpages@gmail.com に送ることを勧めま
-す。
+をマニュアルページのメンテナ mtk.manpages@gmail.com に送り、CC を
+linux-api@ver.kernel.org に送ることを勧めます。
 
 以下はカーネルソースツリーに含まれている読んでおくべきファイルの一覧で
 す-
@@ -149,7 +149,7 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを
      この他にパッチを作る方法についてのよくできた記述は-
 
 	"The Perfect Patch"
-		http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+		http://userweb.kernel.org/~akpm/stuff/tpp.txt
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
@@ -664,7 +664,7 @@ Linux カーネルコミュニティは、一度に大量のコードの塊を
 これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ
 ントの ChangeLog セクションを見てください-
   "The Perfect Patch"
-      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+      http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに
 は数年かかるかもしれません。これは継続的な改善のプロセスであり、そのた

Documentation/stable_kernel_rules.txt

@@ -12,6 +12,7 @@ Rules on what kind of patches are accepted, and which ones are not, into the
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
+ - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.
  - It cannot contain any "trivial" fixes in it (spelling changes,

Documentation/sysctl/kernel.txt

@@ -369,5 +369,15 @@ can be ORed together:
    2 - A module was force loaded by insmod -f.
        Set by modutils >= 2.4.9 and module-init-tools.
    4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
- 64 - A module from drivers/staging was loaded.
+   8 - A module was forcibly unloaded from the system by rmmod -f.
+  16 - A hardware machine check error occurred on the system.
+  32 - A bad page was discovered on the system.
+  64 - The user has asked that the system be marked "tainted".  This
+       could be because they are running software that directly modifies
+       the hardware, or for other reasons.
+ 128 - The system has died.
+ 256 - The ACPI DSDT has been overridden with one supplied by the user
+        instead of using the one provided by the hardware.
+ 512 - A kernel warning has occurred.
+1024 - A module from drivers/staging was loaded.
 

drivers/base/sys.c

@@ -355,7 +355,7 @@ static void __sysdev_resume(struct sys_device *dev)
  *	sysdev_suspend - Suspend all system devices.
  *	@state:		Power state to enter.
  *
- *	We perform an almost identical operation as sys_device_shutdown()
+ *	We perform an almost identical operation as sysdev_shutdown()
  *	above, though calling ->suspend() instead. Interrupts are disabled
  *	when this called. Devices are responsible for both saving state and
  *	quiescing or powering down the device.
@@ -437,7 +437,7 @@ int sysdev_suspend(pm_message_t state)
 /**
  *	sysdev_resume - Bring system devices back to life.
  *
- *	Similar to sys_device_suspend(), but we iterate the list forwards
+ *	Similar to sysdev_suspend(), but we iterate the list forwards
  *	to guarantee that parent devices are resumed before their children.
  *
  *	Note: Interrupts are disabled when called.
@@ -488,7 +488,8 @@ ssize_t sysdev_store_ulong(struct sys_device *sysdev,
 	if (end == buf)
 		return -EINVAL;
 	*(unsigned long *)(ea->var) = new;
-	return end - buf;
+	/* Always return full write size even if we didn't consume all */
+	return size;
 }
 EXPORT_SYMBOL_GPL(sysdev_store_ulong);
 
@@ -511,7 +512,8 @@ ssize_t sysdev_store_int(struct sys_device *sysdev,
 	if (end == buf || new > INT_MAX || new < INT_MIN)
 		return -EINVAL;
 	*(int *)(ea->var) = new;
-	return end - buf;
+	/* Always return full write size even if we didn't consume all */
+	return size;
 }
 EXPORT_SYMBOL_GPL(sysdev_store_int);
 

lib/dynamic_printk.c

@@ -402,6 +402,8 @@ static int __init dynamic_printk_init(void)
 				iter->logical_modname,
 				iter->flag_names, iter->hash, iter->hash2);
 	}
+	if (dynamic_enabled == DYNAMIC_ENABLED_ALL)
+		set_all(true);
 	return 0;
 }
 module_init(dynamic_printk_init);
@@ -411,7 +413,7 @@ static int __init dynamic_printk_setup(char *str)
 {
 	if (str)
 		return -ENOENT;
-	set_all(true);
+	dynamic_enabled = DYNAMIC_ENABLED_ALL;
 	return 0;
 }
 /* Use early_param(), so we can get debug output as early as possible */