Merge branch 'thermal-core'

Merge additional thermal core and ACPI thermal changes for 6.4-rc1:

 - Clean up the step-wise thermal governor (Zhang Rui).

 - Introduce thermal_zone_device() for accessing the device field of
   struct thermal_zone_device and two drivers use it (Daniel Lezcano).

 - Clean up the ACPI thermal driver a bit (Daniel Lezcano).

 - Delete the thermal driver for Intel Menlow platforms that is not
   expected to have any users (Rafael Wysocki).

* thermal-core:
  thermal: intel: menlow: Get rid of this driver
  ACPI: thermal: Move to dedicated function sysfs extra attr creation
  ACPI: thermal: Use thermal_zone_device()
  thermal: intel: pch_thermal: Use thermal driver device to write a trace
  thermal: core: Encapsulate tz->device field
  thermal: gov_step_wise: Adjust code logic to match comment
  thermal: gov_step_wise: Delete obsolete comment

drivers/acpi/thermal.c

@@ -787,6 +787,32 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
 	.critical = acpi_thermal_zone_device_critical,
 };
 
+static int acpi_thermal_zone_sysfs_add(struct acpi_thermal *tz)
+{
+	struct device *tzdev = thermal_zone_device(tz->thermal_zone);
+	int ret;
+
+	ret = sysfs_create_link(&tz->device->dev.kobj,
+				&tzdev->kobj, "thermal_zone");
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_link(&tzdev->kobj,
+				   &tz->device->dev.kobj, "device");
+	if (ret)
+		sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+
+	return ret;
+}
+
+static void acpi_thermal_zone_sysfs_remove(struct acpi_thermal *tz)
+{
+	struct device *tzdev = thermal_zone_device(tz->thermal_zone);
+
+	sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+	sysfs_remove_link(&tzdev->kobj, "device");
+}
+
 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 {
 	int trips = 0;
@@ -820,21 +846,15 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 
-	result = sysfs_create_link(&tz->device->dev.kobj,
-				   &tz->thermal_zone->device.kobj, "thermal_zone");
+	result = acpi_thermal_zone_sysfs_add(tz);
 	if (result)
 		goto unregister_tzd;
 
-	result = sysfs_create_link(&tz->thermal_zone->device.kobj,
-				   &tz->device->dev.kobj, "device");
-	if (result)
-		goto remove_tz_link;
-
 	status =  acpi_bus_attach_private_data(tz->device->handle,
 					       tz->thermal_zone);
 	if (ACPI_FAILURE(status)) {
 		result = -ENODEV;
-		goto remove_dev_link;
+		goto remove_links;
 	}
 
 	result = thermal_zone_device_enable(tz->thermal_zone);
@@ -848,10 +868,8 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 
 acpi_bus_detach:
 	acpi_bus_detach_private_data(tz->device->handle);
-remove_dev_link:
-	sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
-remove_tz_link:
-	sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+remove_links:
+	acpi_thermal_zone_sysfs_remove(tz);
 unregister_tzd:
 	thermal_zone_device_unregister(tz->thermal_zone);
 
@@ -860,8 +878,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 
 static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)
 {
-	sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
-	sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
+	acpi_thermal_zone_sysfs_remove(tz);
 	thermal_zone_device_unregister(tz->thermal_zone);
 	tz->thermal_zone = NULL;
 	acpi_bus_detach_private_data(tz->device->handle);

drivers/thermal/gov_step_wise.c

@@ -21,19 +21,11 @@
  *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
  *       state for this trip point
  *    b. if the trend is THERMAL_TREND_DROPPING, do nothing
- *    c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
- *       for this trip point
- *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
- *       for this trip point
  * If the temperature is lower than a trip point,
  *    a. if the trend is THERMAL_TREND_RAISING, do nothing
  *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
  *       state for this trip point, if the cooling state already
  *       equals lower limit, deactivate the thermal instance
- *    c. if the trend is THERMAL_TREND_RAISE_FULL, do nothing
- *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit,
- *       if the cooling state already equals lower limit,
- *       deactivate the thermal instance
  */
 static unsigned long get_target_state(struct thermal_instance *instance,
 				enum thermal_trend trend, bool throttle)
@@ -61,25 +53,17 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 		return next_target;
 	}
 
-	switch (trend) {
-	case THERMAL_TREND_RAISING:
 	if (throttle) {
+		if (trend == THERMAL_TREND_RAISING)
 			next_target = clamp((cur_state + 1), instance->lower, instance->upper);
-		}
-		break;
-	case THERMAL_TREND_DROPPING:
-		if (cur_state <= instance->lower) {
-			if (!throttle)
-				next_target = THERMAL_NO_TARGET;
 	} else {
-			if (!throttle) {
+		if (trend == THERMAL_TREND_DROPPING) {
+			if (cur_state <= instance->lower)
+				next_target = THERMAL_NO_TARGET;
+			else
 				next_target = clamp((cur_state - 1), instance->lower, instance->upper);
 		}
 	}
-		break;
-	default:
-		break;
-	}
 
 	return next_target;
 }

drivers/thermal/intel/Kconfig

@@ -103,15 +103,6 @@ config INTEL_TCC_COOLING
 	  on how fast the setting takes effect, and how much the CPU frequency
 	  is reduced.
 
-config INTEL_MENLOW
-	tristate "Thermal Management driver for Intel menlow platform"
-	depends on ACPI_THERMAL
-	help
-	  ACPI thermal management enhancement driver on
-	  Intel Menlow platform.
-
-	  If unsure, say N.
-
 config INTEL_HFI_THERMAL
 	bool "Intel Hardware Feedback Interface"
 	depends on NET

drivers/thermal/intel/Makefile

@@ -13,5 +13,4 @@ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
 obj-$(CONFIG_INTEL_PCH_THERMAL)	+= intel_pch_thermal.o
 obj-$(CONFIG_INTEL_TCC_COOLING)	+= intel_tcc_cooling.o
 obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
-obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_INTEL_HFI_THERMAL) += intel_hfi.o

drivers/thermal/intel/intel_pch_thermal.c

@@ -127,7 +127,8 @@ static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
 
 static void pch_critical(struct thermal_zone_device *tzd)
 {
-	dev_dbg(&tzd->device, "%s: critical temperature reached\n", tzd->type);
+	dev_dbg(thermal_zone_device(tzd), "%s: critical temperature reached\n",
+		thermal_zone_device_type(tzd));
 }
 
 static struct thermal_zone_device_ops tzd_ops = {

drivers/thermal/thermal_core.c

@@ -1398,6 +1398,12 @@ int thermal_zone_device_id(struct thermal_zone_device *tzd)
 }
 EXPORT_SYMBOL_GPL(thermal_zone_device_id);
 
+struct device *thermal_zone_device(struct thermal_zone_device *tzd)
+{
+	return &tzd->device;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device);
+
 /**
  * thermal_zone_device_unregister - removes the registered thermal zone device
  * @tz: the thermal zone device to remove

include/linux/thermal.h

@@ -313,6 +313,7 @@ thermal_zone_device_register_with_trips(const char *, struct thermal_trip *, int
 void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
 const char *thermal_zone_device_type(struct thermal_zone_device *tzd);
 int thermal_zone_device_id(struct thermal_zone_device *tzd);
+struct device *thermal_zone_device(struct thermal_zone_device *tzd);
 
 int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
 				     struct thermal_cooling_device *,