Merge tag 'clk-renesas-for-v4.14-tag1' of...

Merge tag 'clk-renesas-for-v4.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geert Uytterhoeven:

  * Add more module clocks for R-Car V2H and M3-W,
  * Add support for the R-Car Gen3 USB 2.0 clock selector PHY,
  * Add support for the new R-Car D3 SoC,
  * Allow compile-testing of all (sub)drivers now all dummy infrastructure
    is available,
  * Small fixes and cleanups.

* tag 'clk-renesas-for-v4.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a7796: Add USB3.0 clock
  clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY
  clk: renesas: cpg-mssr: Add R8A77995 support
  clk: renesas: rcar-gen3: Add support for SCCG/Clean peripheral clocks
  clk: renesas: rcar-gen3: Add divider support for PLL1 and PLL3
  clk: renesas: Add r8a77995 CPG Core Clock Definitions
  clk: renesas: rcar-gen3-cpg: Refactor checks for accessing the div table
  clk: renesas: rcar-gen3-cpg: Drop superfluous variable
  clk: renesas: Allow compile-testing of all (sub)drivers
  clk: renesas: r8a7792: Add IMR-LX3/LSX3 clocks
  clk: renesas: div6: Document fields used for parent selection

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt

@@ -22,6 +22,7 @@ Required Properties:
       - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
       - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
+      - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
     block
@@ -30,7 +31,7 @@ Required Properties:
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
       - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
-		 r8a7795, r8a7796)
+		 r8a7795, r8a7796, r8a77995)
       - "extalr" (r8a7795, r8a7796)
       - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794)
 

Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt

+* Renesas R-Car USB 2.0 clock selector
+
+This file provides information on what the device node for the R-Car USB 2.0
+clock selector.
+
+If you connect an external clock to the USB_EXTAL pin only, you should set
+the clock rate to "usb_extal" node only.
+If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+is not needed because this is default setting. (Of course, you can set the
+clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+Case 1: An external clock connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|External  |---|USB_EXTAL ---> all usb channels|
+	|clock     |   |USB_XTAL                       |
+	+----------+   +-------------------------------+
+In this case, we need this driver with "usb_extal" clock.
+
+Case 2: An oscillator connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|Oscillator|---|USB_EXTAL -+-> all usb channels|
+	|          |---|USB_XTAL --+                   |
+	+----------+   +-------------------------------+
+In this case, we don't need this selector.
+
+Required properties:
+- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
+	      an R8A7795 SoC.
+	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
+	      an R8A7796 SoC.
+	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
+	      compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
+- reg: offset and length of the USB 2.0 clock selector register block.
+- clocks: A list of phandles and specifier pairs.
+- clock-names: Name of the clocks.
+ - The functional clock must be "ehci_ohci"
+ - The USB_EXTAL clock pin must be "usb_extal"
+ - The USB_XTAL clock pin must be "usb_xtal"
+- #clock-cells: Must be 0
+
+Example (R-Car H3):
+
+	usb2_clksel: clock-controller@e6590630 {
+		compatible = "renesas,r8a77950-rcar-usb2-clock-sel",
+			     "renesas,rcar-gen3-usb2-clock-sel";
+		reg = <0 0xe6590630 0 0x02>;
+		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
+		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
+		#clock-cells = <0>;
+	};

drivers/clk/renesas/Kconfig

@@ -15,6 +15,7 @@ config CLK_RENESAS
 	select CLK_R8A7794 if ARCH_R8A7794
 	select CLK_R8A7795 if ARCH_R8A7795
 	select CLK_R8A7796 if ARCH_R8A7796
+	select CLK_R8A77995 if ARCH_R8A77995
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -34,94 +35,103 @@ config CLK_EMEV2
 	bool "Emma Mobile EV2 clock support" if COMPILE_TEST
 
 config CLK_RZA1
-	bool
+	bool "RZ/A1H clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
 config CLK_R8A73A4
-	bool
+	bool "R-Mobile APE6 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7740
-	bool
+	bool "R-Mobile A1 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7743
-	bool
+	bool "RZ/G1M clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
 
 config CLK_R8A7745
-	bool
+	bool "RZ/G1E clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
 
 config CLK_R8A7778
-	bool
+	bool "R-Car M1A clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
 config CLK_R8A7779
-	bool
+	bool "R-Car H1 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
 config CLK_R8A7790
-	bool
+	bool "R-Car H2 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7791
-	bool
+	bool "R-Car M2-W/N clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7792
-	bool
+	bool "R-Car V2H clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 
 config CLK_R8A7794
-	bool
+	bool "R-Car E2 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7795
-	bool
+	bool "R-Car H3 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
 config CLK_R8A7796
-	bool
+	bool "R-Car M3-W clock support" if COMPILE_TEST
+	select CLK_RCAR_GEN3_CPG
+
+config CLK_R8A77995
+	bool "R-Car D3 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
 config CLK_SH73A0
-	bool
+	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 
 # Family
 config CLK_RCAR_GEN2
-	bool
+	bool "R-Car Gen2 legacy clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 config CLK_RCAR_GEN2_CPG
-	bool
+	bool "R-Car Gen2 CPG clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
 
 config CLK_RCAR_GEN3_CPG
-	bool
+	bool "R-Car Gen3 CPG clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
 
+config CLK_RCAR_USB2_CLOCK_SEL
+	bool "Renesas R-Car USB2 clock selector support"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  This is a driver for R-Car USB2 clock selector
 
 # Generic
 config CLK_RENESAS_CPG_MSSR
-	bool
+	bool "CPG/MSSR clock support" if COMPILE_TEST
 	select CLK_RENESAS_DIV6
 
 config CLK_RENESAS_CPG_MSTP
-	bool
+	bool "MSTP clock support" if COMPILE_TEST
 
 config CLK_RENESAS_DIV6
 	bool "DIV6 clock support" if COMPILE_TEST

drivers/clk/renesas/Makefile

@@ -13,12 +13,14 @@ obj-$(CONFIG_CLK_R8A7792)		+= r8a7792-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7794)		+= r8a7794-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7795)		+= r8a7795-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7796)		+= r8a7796-cpg-mssr.o
+obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family
 obj-$(CONFIG_CLK_RCAR_GEN2)		+= clk-rcar-gen2.o
 obj-$(CONFIG_CLK_RCAR_GEN2_CPG)		+= rcar-gen2-cpg.o
 obj-$(CONFIG_CLK_RCAR_GEN3_CPG)		+= rcar-gen3-cpg.o
+obj-$(CONFIG_CLK_RCAR_USB2_CLOCK_SEL)	+= rcar-usb2-clock-sel.o
 
 # Generic
 obj-$(CONFIG_CLK_RENESAS_CPG_MSSR)	+= renesas-cpg-mssr.o

drivers/clk/renesas/clk-div6.c

@@ -29,6 +29,9 @@
  * @hw: handle between common and hardware-specific interfaces
  * @reg: IO-remapped register
  * @div: divisor value (1-64)
+ * @src_shift: Shift to access the register bits to select the parent clock
+ * @src_width: Number of register bits to select the parent clock (may be 0)
+ * @parents: Array to map from valid parent clocks indices to hardware indices
  */
 struct div6_clock {
 	struct clk_hw hw;

drivers/clk/renesas/r8a7792-cpg-mssr.c

@@ -118,6 +118,13 @@ static const struct mssr_mod_clk r8a7792_mod_clks[] __initconst = {
 	DEF_MOD("vin1",			 810,	R8A7792_CLK_ZG),
 	DEF_MOD("vin0",			 811,	R8A7792_CLK_ZG),
 	DEF_MOD("etheravb",		 812,	R8A7792_CLK_HP),
+	DEF_MOD("imr-lx3",		 821,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-1",		 822,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-0",		 823,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-5",		 825,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-4",		 826,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-3",		 827,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-2",		 828,	R8A7792_CLK_ZG),
 	DEF_MOD("gyro-adc",		 901,	R8A7792_CLK_P),
 	DEF_MOD("gpio7",		 904,	R8A7792_CLK_CP),
 	DEF_MOD("gpio6",		 905,	R8A7792_CLK_CP),

drivers/clk/renesas/r8a7795-cpg-mssr.c

@@ -305,23 +305,23 @@ static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
 					 (((md) & BIT(17)) >> 17))
 
 static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
-	/* EXTAL div	PLL1 mult	PLL3 mult */
-	{ 1,		192,		192,	},
-	{ 1,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		192,		192,	},
-	{ 1,		160,		160,	},
-	{ 1,		160,		106,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		160,		160,	},
-	{ 1,		128,		128,	},
-	{ 1,		128,		84,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		128,		128,	},
-	{ 2,		192,		192,	},
-	{ 2,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 2,		192,		192,	},
+	/* EXTAL div	PLL1 mult/div	PLL3 mult/div */
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		160,	1,	106,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		128,	1,	128,	1,	},
+	{ 1,		128,	1,	84,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		128,	1,	128,	1,	},
+	{ 2,		192,	1,	192,	1,	},
+	{ 2,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 2,		192,	1,	192,	1,	},
 };
 
 static const struct soc_device_attribute r8a7795es1[] __initconst = {

drivers/clk/renesas/r8a7796-cpg-mssr.c

@@ -138,6 +138,7 @@ static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {
 	DEF_MOD("sdif0",		 314,	R8A7796_CLK_SD0),
 	DEF_MOD("pcie1",		 318,	R8A7796_CLK_S3D1),
 	DEF_MOD("pcie0",		 319,	R8A7796_CLK_S3D1),
+	DEF_MOD("usb3-if0",		 328,	R8A7796_CLK_S3D1),
 	DEF_MOD("usb-dmac0",		 330,	R8A7796_CLK_S3D1),
 	DEF_MOD("usb-dmac1",		 331,	R8A7796_CLK_S3D1),
 	DEF_MOD("rwdt",			 402,	R8A7796_CLK_R),
@@ -277,23 +278,23 @@ static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
 					 (((md) & BIT(17)) >> 17))
 
 static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
-	/* EXTAL div	PLL1 mult	PLL3 mult */
-	{ 1,		192,		192,	},
-	{ 1,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		192,		192,	},
-	{ 1,		160,		160,	},
-	{ 1,		160,		106,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		160,		160,	},
-	{ 1,		128,		128,	},
-	{ 1,		128,		84,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		128,		128,	},
-	{ 2,		192,		192,	},
-	{ 2,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 2,		192,		192,	},
+	/* EXTAL div	PLL1 mult/div	PLL3 mult/div */
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		160,	1,	106,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		128,	1,	128,	1,	},
+	{ 1,		128,	1,	84,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		128,	1,	128,	1,	},
+	{ 2,		192,	1,	192,	1,	},
+	{ 2,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 2,		192,	1,	192,	1,	},
 };
 
 static int __init r8a7796_cpg_mssr_init(struct device *dev)

drivers/clk/renesas/r8a77995-cpg-mssr.c

+/*
+ * r8a77995 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2017 Glider bvba
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a77995-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A77995_CLK_CP,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL3,
+	CLK_PLL0D2,
+	CLK_PLL0D3,
+	CLK_PLL0D5,
+	CLK_PLL1D2,
+	CLK_PE,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",     CLK_EXTAL),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",      CLK_MAIN, CLK_TYPE_GEN3_MAIN,       CLK_EXTAL),
+	DEF_BASE(".pll1",      CLK_PLL1, CLK_TYPE_GEN3_PLL1,       CLK_MAIN),
+	DEF_BASE(".pll3",      CLK_PLL3, CLK_TYPE_GEN3_PLL3,       CLK_MAIN),
+
+	DEF_FIXED(".pll0",     CLK_PLL0,           CLK_MAIN,	   4, 250),
+	DEF_FIXED(".pll0d2",   CLK_PLL0D2,         CLK_PLL0,       2, 1),
+	DEF_FIXED(".pll0d3",   CLK_PLL0D3,         CLK_PLL0,       3, 1),
+	DEF_FIXED(".pll0d5",   CLK_PLL0D5,         CLK_PLL0,       5, 1),
+	DEF_FIXED(".pll1d2",   CLK_PLL1D2,         CLK_PLL1,       2, 1),
+	DEF_FIXED(".pe",       CLK_PE,             CLK_PLL0D3,     4, 1),
+	DEF_FIXED(".s0",       CLK_S0,             CLK_PLL1,       2, 1),
+	DEF_FIXED(".s1",       CLK_S1,             CLK_PLL1,       3, 1),
+	DEF_FIXED(".s2",       CLK_S2,             CLK_PLL1,       4, 1),
+	DEF_FIXED(".s3",       CLK_S3,             CLK_PLL1,       6, 1),
+	DEF_FIXED(".sdsrc",    CLK_SDSRC,          CLK_PLL1,       2, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("z2",        R8A77995_CLK_Z2,    CLK_PLL0D3,     1, 1),
+	DEF_FIXED("ztr",       R8A77995_CLK_ZTR,   CLK_PLL1,       6, 1),
+	DEF_FIXED("zt",        R8A77995_CLK_ZT,    CLK_PLL1,       4, 1),
+	DEF_FIXED("zx",        R8A77995_CLK_ZX,    CLK_PLL1,       3, 1),
+	DEF_FIXED("s0d1",      R8A77995_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s1d1",      R8A77995_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",      R8A77995_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",      R8A77995_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",      R8A77995_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",      R8A77995_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",      R8A77995_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",      R8A77995_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",      R8A77995_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",      R8A77995_CLK_S3D4,  CLK_S3,         4, 1),
+
+	DEF_FIXED("cl",        R8A77995_CLK_CL,    CLK_PLL1,      48, 1),
+	DEF_FIXED("cp",        R8A77995_CLK_CP,    CLK_EXTAL,      2, 1),
+	DEF_FIXED("osc",       R8A77995_CLK_OSC,   CLK_EXTAL,    384, 1),
+	DEF_FIXED("r",         R8A77995_CLK_R,     CLK_EXTAL,   1536, 1),
+
+	DEF_GEN3_PE("s1d4c",   R8A77995_CLK_S1D4C, CLK_S1, 4, CLK_PE, 2),
+	DEF_GEN3_PE("s3d1c",   R8A77995_CLK_S3D1C, CLK_S3, 1, CLK_PE, 1),
+	DEF_GEN3_PE("s3d2c",   R8A77995_CLK_S3D2C, CLK_S3, 2, CLK_PE, 2),
+	DEF_GEN3_PE("s3d4c",   R8A77995_CLK_S3D4C, CLK_S3, 4, CLK_PE, 4),
+
+	DEF_GEN3_SD("sd0",     R8A77995_CLK_SD0,   CLK_SDSRC,     0x268),
+
+	DEF_DIV6P1("canfd",    R8A77995_CLK_CANFD, CLK_PLL0D3,    0x244),
+	DEF_DIV6P1("mso",      R8A77995_CLK_MSO,   CLK_PLL1D2,    0x014),
+};
+
+static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
+	DEF_MOD("scif5",		 202,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif4",		 203,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif3",		 204,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif1",		 206,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif0",		 207,	R8A77995_CLK_S3D4C),
+	DEF_MOD("msiof3",		 208,	R8A77995_CLK_MSO),
+	DEF_MOD("msiof2",		 209,	R8A77995_CLK_MSO),
+	DEF_MOD("msiof1",		 210,	R8A77995_CLK_MSO),
+	DEF_MOD("msiof0",		 211,	R8A77995_CLK_MSO),
+	DEF_MOD("sys-dmac2",		 217,	R8A77995_CLK_S3D1),
+	DEF_MOD("sys-dmac1",		 218,	R8A77995_CLK_S3D1),
+	DEF_MOD("sys-dmac0",		 219,	R8A77995_CLK_S3D1),
+	DEF_MOD("cmt3",			 300,	R8A77995_CLK_R),
+	DEF_MOD("cmt2",			 301,	R8A77995_CLK_R),
+	DEF_MOD("cmt1",			 302,	R8A77995_CLK_R),
+	DEF_MOD("cmt0",			 303,	R8A77995_CLK_R),
+	DEF_MOD("scif2",		 310,	R8A77995_CLK_S3D4C),
+	DEF_MOD("emmc0",		 312,	R8A77995_CLK_SD0),
+	DEF_MOD("usb-dmac0",		 330,	R8A77995_CLK_S3D1),
+	DEF_MOD("usb-dmac1",		 331,	R8A77995_CLK_S3D1),
+	DEF_MOD("rwdt",			 402,	R8A77995_CLK_R),
+	DEF_MOD("intc-ex",		 407,	R8A77995_CLK_CP),
+	DEF_MOD("intc-ap",		 408,	R8A77995_CLK_S3D1),
+	DEF_MOD("audmac0",		 502,	R8A77995_CLK_S3D1),
+	DEF_MOD("hscif3",		 517,	R8A77995_CLK_S3D1C),
+	DEF_MOD("hscif0",		 520,	R8A77995_CLK_S3D1C),
+	DEF_MOD("thermal",		 522,	R8A77995_CLK_CP),
+	DEF_MOD("pwm",			 523,	R8A77995_CLK_S3D4C),
+	DEF_MOD("fcpvd1",		 602,	R8A77995_CLK_S1D2),
+	DEF_MOD("fcpvd0",		 603,	R8A77995_CLK_S1D2),
+	DEF_MOD("fcpvbs",		 607,	R8A77995_CLK_S0D1),
+	DEF_MOD("vspd1",		 622,	R8A77995_CLK_S1D2),
+	DEF_MOD("vspd0",		 623,	R8A77995_CLK_S1D2),
+	DEF_MOD("vspbs",		 627,	R8A77995_CLK_S0D1),
+	DEF_MOD("ehci0",		 703,	R8A77995_CLK_S3D2),
+	DEF_MOD("hsusb",		 704,	R8A77995_CLK_S3D2),
+	DEF_MOD("du1",			 723,	R8A77995_CLK_S2D1),
+	DEF_MOD("du0",			 724,	R8A77995_CLK_S2D1),
+	DEF_MOD("lvds",			 727,	R8A77995_CLK_S2D1),
+	DEF_MOD("vin7",			 804,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin6",			 805,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin5",			 806,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin4",			 807,	R8A77995_CLK_S1D2),
+	DEF_MOD("etheravb",		 812,	R8A77995_CLK_S3D2),
+	DEF_MOD("imr0",			 823,	R8A77995_CLK_S1D2),
+	DEF_MOD("gpio6",		 906,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio5",		 907,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio4",		 908,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio3",		 909,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio2",		 910,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio1",		 911,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio0",		 912,	R8A77995_CLK_S3D4),
+	DEF_MOD("can-fd",		 914,	R8A77995_CLK_S3D2),
+	DEF_MOD("can-if1",		 915,	R8A77995_CLK_S3D4),
+	DEF_MOD("can-if0",		 916,	R8A77995_CLK_S3D4),
+	DEF_MOD("i2c3",			 928,	R8A77995_CLK_S3D2),
+	DEF_MOD("i2c2",			 929,	R8A77995_CLK_S3D2),
+	DEF_MOD("i2c1",			 930,	R8A77995_CLK_S3D2),
+	DEF_MOD("i2c0",			 931,	R8A77995_CLK_S3D2),
+	DEF_MOD("ssi-all",		1005,	R8A77995_CLK_S3D4),
+	DEF_MOD("ssi4",			1011,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi3",			1012,	MOD_CLK_ID(1005)),
+	DEF_MOD("scu-all",		1017,	R8A77995_CLK_S3D4),
+	DEF_MOD("scu-dvc1",		1018,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-dvc0",		1019,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu1-mix1",	1020,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu0-mix0",	1021,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src6",		1025,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src5",		1026,	MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a77995_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD19		EXTAL (MHz)	PLL0		PLL1		PLL3
+ *--------------------------------------------------------------------
+ * 0		48 x 1		x250/4		x100/3		x100/3
+ * 1		48 x 1		x250/4		x100/3		x116/6
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	(((md) & BIT(19)) >> 19)
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[2] __initconst = {
+	/* EXTAL div	PLL1 mult/div	PLL3 mult/div */
+	{ 1,		100,	3,	100,	3,	},
+	{ 1,		100,	3,	116,	6,	},
+};
+
+static int __init r8a77995_cpg_mssr_init(struct device *dev)
+{
+	const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
+	u32 cpg_mode;
+	int error;
+
+	error = rcar_rst_read_mode_pins(&cpg_mode);
+	if (error)
+		return error;
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+	return rcar_gen3_cpg_init(cpg_pll_config, 0, cpg_mode);
+}
+
+const struct cpg_mssr_info r8a77995_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a77995_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a77995_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a77995_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a77995_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a77995_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a77995_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a77995_cpg_mssr_init,
+	.cpg_clk_register = rcar_gen3_cpg_clk_register,
+};

drivers/clk/renesas/rcar-gen3-cpg.c

@@ -60,6 +60,7 @@ struct sd_clock {
 	unsigned int div_num;
 	unsigned int div_min;
 	unsigned int div_max;
+	unsigned int cur_div_idx;
 };
 
 /* SDn divider
@@ -96,21 +97,10 @@ static const struct sd_div_table cpg_sd_div_table[] = {
 static int cpg_sd_clock_enable(struct clk_hw *hw)
 {
 	struct sd_clock *clock = to_sd_clock(hw);
-	u32 val, sd_fc;
-	unsigned int i;
-
-	val = readl(clock->reg);
-
-	sd_fc = val & CPG_SD_FC_MASK;
-	for (i = 0; i < clock->div_num; i++)
-		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
-			break;
-
-	if (i >= clock->div_num)
-		return -EINVAL;
+	u32 val = readl(clock->reg);
 
 	val &= ~(CPG_SD_STP_MASK);
-	val |= clock->div_table[i].val & CPG_SD_STP_MASK;
+	val |= clock->div_table[clock->cur_div_idx].val & CPG_SD_STP_MASK;
 
 	writel(val, clock->reg);
 
@@ -135,21 +125,9 @@ static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
 	struct sd_clock *clock = to_sd_clock(hw);
-	unsigned long rate = parent_rate;
-	u32 val, sd_fc;
-	unsigned int i;
 
-	val = readl(clock->reg);
-
-	sd_fc = val & CPG_SD_FC_MASK;
-	for (i = 0; i < clock->div_num; i++)
-		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
-			break;
-
-	if (i >= clock->div_num)
-		return -EINVAL;
-
-	return DIV_ROUND_CLOSEST(rate, clock->div_table[i].div);
+	return DIV_ROUND_CLOSEST(parent_rate,
+				 clock->div_table[clock->cur_div_idx].div);
 }
 
 static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
@@ -190,6 +168,8 @@ static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (i >= clock->div_num)
 		return -EINVAL;
 
+	clock->cur_div_idx = i;
+
 	val = readl(clock->reg);
 	val &= ~(CPG_SD_STP_MASK | CPG_SD_FC_MASK);
 	val |= clock->div_table[i].val & (CPG_SD_STP_MASK | CPG_SD_FC_MASK);
@@ -215,6 +195,7 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,
 	struct sd_clock *clock;
 	struct clk *clk;
 	unsigned int i;
+	u32 sd_fc;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
@@ -231,6 +212,18 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,
 	clock->div_table = cpg_sd_div_table;
 	clock->div_num = ARRAY_SIZE(cpg_sd_div_table);
 
+	sd_fc = readl(clock->reg) & CPG_SD_FC_MASK;
+	for (i = 0; i < clock->div_num; i++)
+		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
+			break;
+
+	if (WARN_ON(i >= clock->div_num)) {
+		kfree(clock);
+		return ERR_PTR(-EINVAL);
+	}
+
+	clock->cur_div_idx = i;
+
 	clock->div_max = clock->div_table[0].div;
 	clock->div_min = clock->div_max;
 	for (i = 1; i < clock->div_num; i++) {
@@ -279,7 +272,7 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 	unsigned int div = 1;
 	u32 value;
 
-	parent = clks[core->parent];
+	parent = clks[core->parent & 0xffff];	/* CLK_TYPE_PE uses high bits */
 	if (IS_ERR(parent))
 		return ERR_CAST(parent);
 
@@ -303,6 +296,7 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 
 	case CLK_TYPE_GEN3_PLL1:
 		mult = cpg_pll_config->pll1_mult;
+		div = cpg_pll_config->pll1_div;
 		break;
 
 	case CLK_TYPE_GEN3_PLL2:
@@ -320,6 +314,7 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 
 	case CLK_TYPE_GEN3_PLL3:
 		mult = cpg_pll_config->pll3_mult;
+		div = cpg_pll_config->pll3_div;
 		break;
 
 	case CLK_TYPE_GEN3_PLL4:
@@ -360,6 +355,24 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 			parent = clks[cpg_clk_extalr];
 		break;
 
+	case CLK_TYPE_GEN3_PE:
+		/*
+		 * Peripheral clock with a fixed divider, selectable between
+		 * clean and spread spectrum parents using MD12
+		 */
+		if (cpg_mode & BIT(12)) {
+			/* Clean */
+			div = core->div & 0xffff;
+		} else {
+			/* SCCG */
+			parent = clks[core->parent >> 16];
+			if (IS_ERR(parent))
+				return ERR_CAST(parent);
+			div = core->div >> 16;
+		}
+		mult = 1;
+		break;
+
 	default:
 		return ERR_PTR(-EINVAL);
 	}

drivers/clk/renesas/rcar-gen3-cpg.h

@@ -20,15 +20,24 @@ enum rcar_gen3_clk_types {
 	CLK_TYPE_GEN3_PLL4,
 	CLK_TYPE_GEN3_SD,
 	CLK_TYPE_GEN3_R,
+	CLK_TYPE_GEN3_PE,
 };
 
 #define DEF_GEN3_SD(_name, _id, _parent, _offset)	\
 	DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
 
+#define DEF_GEN3_PE(_name, _id, _parent_sscg, _div_sscg, _parent_clean, \
+		    _div_clean) \
+	DEF_BASE(_name, _id, CLK_TYPE_GEN3_PE,			\
+		 (_parent_sscg) << 16 | (_parent_clean),	\
+		 .div = (_div_sscg) << 16 | (_div_clean))
+
 struct rcar_gen3_cpg_pll_config {
-	unsigned int extal_div;
-	unsigned int pll1_mult;
-	unsigned int pll3_mult;
+	u8 extal_div;
+	u8 pll1_mult;
+	u8 pll1_div;
+	u8 pll3_mult;
+	u8 pll3_div;
 };
 
 #define CPG_RCKCR	0x240

drivers/clk/renesas/rcar-usb2-clock-sel.c

+/*
+ * Renesas R-Car USB2.0 clock selector
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * Based on renesas-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#define USB20_CLKSET0		0x00
+#define CLKSET0_INTCLK_EN	BIT(11)
+#define CLKSET0_PRIVATE		BIT(0)
+#define CLKSET0_EXTAL_ONLY	(CLKSET0_INTCLK_EN | CLKSET0_PRIVATE)
+
+struct usb2_clock_sel_priv {
+	void __iomem *base;
+	struct clk_hw hw;
+	bool extal;
+	bool xtal;
+};
+#define to_priv(_hw)	container_of(_hw, struct usb2_clock_sel_priv, hw)
+
+static void usb2_clock_sel_enable_extal_only(struct usb2_clock_sel_priv *priv)
+{
+	u16 val = readw(priv->base + USB20_CLKSET0);
+
+	pr_debug("%s: enter %d %d %x\n", __func__,
+		 priv->extal, priv->xtal, val);
+
+	if (priv->extal && !priv->xtal && val != CLKSET0_EXTAL_ONLY)
+		writew(CLKSET0_EXTAL_ONLY, priv->base + USB20_CLKSET0);
+}
+
+static void usb2_clock_sel_disable_extal_only(struct usb2_clock_sel_priv *priv)
+{
+	if (priv->extal && !priv->xtal)
+		writew(CLKSET0_PRIVATE, priv->base + USB20_CLKSET0);
+}
+
+static int usb2_clock_sel_enable(struct clk_hw *hw)
+{
+	usb2_clock_sel_enable_extal_only(to_priv(hw));
+
+	return 0;
+}
+
+static void usb2_clock_sel_disable(struct clk_hw *hw)
+{
+	usb2_clock_sel_disable_extal_only(to_priv(hw));
+}
+
+/*
+ * This module seems a mux, but this driver assumes a gate because
+ * ehci/ohci platform drivers don't support clk_set_parent() for now.
+ * If this driver acts as a gate, ehci/ohci-platform drivers don't need
+ * any modification.
+ */
+static const struct clk_ops usb2_clock_sel_clock_ops = {
+	.enable = usb2_clock_sel_enable,
+	.disable = usb2_clock_sel_disable,
+};
+
+static const struct of_device_id rcar_usb2_clock_sel_match[] = {
+	{ .compatible = "renesas,rcar-gen3-usb2-clock-sel" },
+	{ }
+};
+
+static int rcar_usb2_clock_sel_suspend(struct device *dev)
+{
+	struct usb2_clock_sel_priv *priv = dev_get_drvdata(dev);
+
+	usb2_clock_sel_disable_extal_only(priv);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int rcar_usb2_clock_sel_resume(struct device *dev)
+{
+	struct usb2_clock_sel_priv *priv = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	usb2_clock_sel_enable_extal_only(priv);
+
+	return 0;
+}
+
+static int rcar_usb2_clock_sel_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb2_clock_sel_priv *priv = platform_get_drvdata(pdev);
+
+	of_clk_del_provider(dev->of_node);
+	clk_hw_unregister(&priv->hw);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct usb2_clock_sel_priv *priv;
+	struct resource *res;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	clk = devm_clk_get(dev, "usb_extal");
+	if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+		priv->extal = !!clk_get_rate(clk);
+		clk_disable_unprepare(clk);
+	}
+	clk = devm_clk_get(dev, "usb_xtal");
+	if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+		priv->xtal = !!clk_get_rate(clk);
+		clk_disable_unprepare(clk);
+	}
+
+	if (!priv->extal && !priv->xtal) {
+		dev_err(dev, "This driver needs usb_extal or usb_xtal\n");
+		return -ENOENT;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	dev_set_drvdata(dev, priv);
+
+	init.name = "rcar_usb2_clock_sel";
+	init.ops = &usb2_clock_sel_clock_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	priv->hw.init = &init;
+
+	clk = clk_register(NULL, &priv->hw);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	return of_clk_add_hw_provider(np, of_clk_hw_simple_get, &priv->hw);
+}
+
+static const struct dev_pm_ops rcar_usb2_clock_sel_pm_ops = {
+	.suspend	= rcar_usb2_clock_sel_suspend,
+	.resume		= rcar_usb2_clock_sel_resume,
+};
+
+static struct platform_driver rcar_usb2_clock_sel_driver = {
+	.driver		= {
+		.name	= "rcar-usb2-clock-sel",
+		.of_match_table = rcar_usb2_clock_sel_match,
+		.pm	= &rcar_usb2_clock_sel_pm_ops,
+	},
+	.probe		= rcar_usb2_clock_sel_probe,
+	.remove		= rcar_usb2_clock_sel_remove,
+};
+builtin_platform_driver(rcar_usb2_clock_sel_driver);
+
+MODULE_DESCRIPTION("Renesas R-Car USB2 clock selector Driver");
+MODULE_LICENSE("GPL v2");

drivers/clk/renesas/renesas-cpg-mssr.c

@@ -679,6 +679,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.compatible = "renesas,r8a7796-cpg-mssr",
 		.data = &r8a7796_cpg_mssr_info,
 	},
+#endif
+#ifdef CONFIG_CLK_R8A77995
+	{
+		.compatible = "renesas,r8a77995-cpg-mssr",
+		.data = &r8a77995_cpg_mssr_info,
+	},
 #endif
 	{ /* sentinel */ }
 };

drivers/clk/renesas/renesas-cpg-mssr.h

@@ -138,6 +138,7 @@ extern const struct cpg_mssr_info r8a7792_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7794_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a77995_cpg_mssr_info;
 
 
     /*

include/dt-bindings/clock/r8a77995-cpg-mssr.h

+/*
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a77995 CPG Core Clocks */
+#define R8A77995_CLK_Z2			0
+#define R8A77995_CLK_ZG			1
+#define R8A77995_CLK_ZTR		2
+#define R8A77995_CLK_ZT			3
+#define R8A77995_CLK_ZX			4
+#define R8A77995_CLK_S0D1		5
+#define R8A77995_CLK_S1D1		6
+#define R8A77995_CLK_S1D2		7
+#define R8A77995_CLK_S1D4		8
+#define R8A77995_CLK_S2D1		9
+#define R8A77995_CLK_S2D2		10
+#define R8A77995_CLK_S2D4		11
+#define R8A77995_CLK_S3D1		12
+#define R8A77995_CLK_S3D2		13
+#define R8A77995_CLK_S3D4		14
+#define R8A77995_CLK_S1D4C		15
+#define R8A77995_CLK_S3D1C		16
+#define R8A77995_CLK_S3D2C		17
+#define R8A77995_CLK_S3D4C		18
+#define R8A77995_CLK_LB			19
+#define R8A77995_CLK_CL			20
+#define R8A77995_CLK_ZB3		21
+#define R8A77995_CLK_ZB3D2		22
+#define R8A77995_CLK_CR			23
+#define R8A77995_CLK_CRD2		24
+#define R8A77995_CLK_SD0H		25
+#define R8A77995_CLK_SD0		26
+#define R8A77995_CLK_SSP2		27
+#define R8A77995_CLK_SSP1		28
+#define R8A77995_CLK_RPC		29
+#define R8A77995_CLK_RPCD2		30
+#define R8A77995_CLK_ZA2		31
+#define R8A77995_CLK_ZA8		32
+#define R8A77995_CLK_Z2D		33
+#define R8A77995_CLK_CANFD		34
+#define R8A77995_CLK_MSO		35
+#define R8A77995_CLK_R			36
+#define R8A77995_CLK_OSC		37
+#define R8A77995_CLK_LV0		38
+#define R8A77995_CLK_LV1		39
+#define R8A77995_CLK_CP			40
+
+#endif /* __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__ */