Commit 536fd93d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in these updates are:
   - Performance optimisation to avoid writing the control register at
     every exception.
   - Use static inline instead of extern inline in ftrace code.
   - Crypto ARM assembly updates for big endian
   - Alignment of initrd/.init memory to page sizes when freeing to
     ensure that we fully free the regions
   - Add gcov support
   - A couple of preparatory patches for VDSO support: use
     _install_special_mapping, and randomize the sigpage placement above
     stack.
   - Add L2 ePAPR DT cache properties so that DT can specify the cache
     geometry.
   - Preparatory patch for FIQ (NMI) kernel C code for things like
     spinlock lockup debug.  Following on from this are a couple of my
     patches cleaning up show_regs() and removing an unused (probably
     since 1.x days) do_unexp_fiq() function.
   - Use pr_warn() rather than pr_warning().
   - A number of cleanups (smp, footbridge, return_address)"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: 8167/1: extend the reserved memory for initrd to be page aligned
  ARM: 8168/1: extend __init_end to a page align address
  ARM: 8169/1: l2c: parse cache properties from ePAPR definitions
  ARM: 8160/1: drop warning about return_address not using unwind tables
  ARM: 8161/1: footbridge: select machine dir based on ARCH_FOOTBRIDGE
  ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
  ARM: 8155/1: place sigpage at a random offset above stack
  ARM: 8154/1: use _install_special_mapping for sigpage
  ARM: 8153/1: Enable gcov support on the ARM architecture
  ARM: Avoid writing to control register on every exception
  ARM: 8152/1: Convert pr_warning to pr_warn
  ARM: remove unused do_unexp_fiq() function
  ARM: remove extraneous newline in show_regs()
  ARM: 8150/3: fiq: Replace default FIQ handler
  ARM: 8140/1: ep93xx: Enable DEBUG_LL_UART_PL01X
  ARM: 8139/1: versatile: Enable DEBUG_LL_UART_PL01X
  ARM: 8138/1: drop ISAR0 workaround for B15
  ARM: 8136/1: sa1100: add Micro ASIC platform device
  ARM: 8131/1: arm/smp: Absorb boot_secondary()
  ARM: 8126/1: crypto: enable NEON SHA-384/SHA-512 for big endian
  ...
parents e4e65676 d5d16892
......@@ -2,6 +2,10 @@
ARM cores often have a separate level 2 cache controller. There are various
implementations of the L2 cache controller with compatible programming models.
Some of the properties that are just prefixed "cache-*" are taken from section
3.7.3 of the ePAPR v1.1 specification which can be found at:
https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
The ARM L2 cache representation in the device tree should be done as follows:
Required properties:
......@@ -44,6 +48,12 @@ Optional properties:
I/O coherent mode. Valid only when the arm,pl310-cache compatible
string is used.
- interrupts : 1 combined interrupt.
- cache-size : specifies the size in bytes of the cache
- cache-sets : specifies the number of associativity sets of the cache
- cache-block-size : specifies the size in bytes of a cache block
- cache-line-size : specifies the size in bytes of a line in the cache,
if this is not specified, the line size is assumed to be equal to the
cache block size
- cache-id-part: cache id part number to be used if it is not present
on hardware
- wt-override: If present then L2 is forced to Write through mode
......
......@@ -157,6 +157,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_HISI) += hisi
......@@ -205,7 +206,6 @@ machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_FOOTBRIDGE) += footbridge
machine-$(CONFIG_PLAT_SPEAR) += spear
# Platform directory name. This list is sorted alphanumerically
......
......@@ -5,6 +5,8 @@
# architecture-specific flags and dependencies.
#
GCOV_PROFILE := n
LDFLAGS_bootp :=-p --no-undefined -X \
--defsym initrd_phys=$(INITRD_PHYS) \
--defsym params_phys=$(PARAMS_PHYS) -T
......
......@@ -37,6 +37,8 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
OBJS += hyp-stub.o
endif
GCOV_PROFILE := n
#
# Architecture dependencies
#
......
......@@ -107,5 +107,6 @@ CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_PL01X=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_LIBCRC32C=y
......@@ -82,5 +82,6 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_PL01X=y
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y
......@@ -9,7 +9,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.syntax unified
.code 32
......@@ -61,13 +61,13 @@
#define RT3 r12
#define W0 q0
#define W1 q1
#define W1 q7
#define W2 q2
#define W3 q3
#define W4 q4
#define W5 q5
#define W6 q6
#define W7 q7
#define W5 q6
#define W6 q5
#define W7 q1
#define tmp0 q8
#define tmp1 q9
......@@ -79,6 +79,11 @@
#define qK3 q14
#define qK4 q15
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ARM_LE(code...)
#else
#define ARM_LE(code...) code
#endif
/* Round function macros. */
......@@ -150,45 +155,45 @@
#define W_PRECALC_00_15() \
add RWK, sp, #(WK_offs(0)); \
\
vld1.32 {tmp0, tmp1}, [RDATA]!; \
vrev32.8 W0, tmp0; /* big => little */ \
vld1.32 {tmp2, tmp3}, [RDATA]!; \
vld1.32 {W0, W7}, [RDATA]!; \
ARM_LE(vrev32.8 W0, W0; ) /* big => little */ \
vld1.32 {W6, W5}, [RDATA]!; \
vadd.u32 tmp0, W0, curK; \
vrev32.8 W7, tmp1; /* big => little */ \
vrev32.8 W6, tmp2; /* big => little */ \
ARM_LE(vrev32.8 W7, W7; ) /* big => little */ \
ARM_LE(vrev32.8 W6, W6; ) /* big => little */ \
vadd.u32 tmp1, W7, curK; \
vrev32.8 W5, tmp3; /* big => little */ \
ARM_LE(vrev32.8 W5, W5; ) /* big => little */ \
vadd.u32 tmp2, W6, curK; \
vst1.32 {tmp0, tmp1}, [RWK]!; \
vadd.u32 tmp3, W5, curK; \
vst1.32 {tmp2, tmp3}, [RWK]; \
#define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vld1.32 {tmp0, tmp1}, [RDATA]!; \
vld1.32 {W0, W7}, [RDATA]!; \
#define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
add RWK, sp, #(WK_offs(0)); \
#define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vrev32.8 W0, tmp0; /* big => little */ \
ARM_LE(vrev32.8 W0, W0; ) /* big => little */ \
#define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vld1.32 {tmp2, tmp3}, [RDATA]!; \
vld1.32 {W6, W5}, [RDATA]!; \
#define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vadd.u32 tmp0, W0, curK; \
#define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vrev32.8 W7, tmp1; /* big => little */ \
ARM_LE(vrev32.8 W7, W7; ) /* big => little */ \
#define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vrev32.8 W6, tmp2; /* big => little */ \
ARM_LE(vrev32.8 W6, W6; ) /* big => little */ \
#define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vadd.u32 tmp1, W7, curK; \
#define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vrev32.8 W5, tmp3; /* big => little */ \
ARM_LE(vrev32.8 W5, W5; ) /* big => little */ \
#define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \
vadd.u32 tmp2, W6, curK; \
......
......@@ -45,7 +45,7 @@ void *return_address(unsigned int);
#else
extern inline void *return_address(unsigned int level)
static inline void *return_address(unsigned int level)
{
return NULL;
}
......
......@@ -48,12 +48,6 @@ extern void smp_init_cpus(void);
*/
extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
/*
* Boot a secondary CPU, and assign it the specified idle task.
* This also gives us the initial stack to use for this CPU.
*/
extern int boot_secondary(unsigned int cpu, struct task_struct *);
/*
* Called from platform specific assembly code, this is the
* secondary CPU entry point.
......
......@@ -63,7 +63,7 @@ static inline void syscall_get_arguments(struct task_struct *task,
if (i + n > SYSCALL_MAX_ARGS) {
unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
pr_warning("%s called with max args %d, handling only %d\n",
pr_warn("%s called with max args %d, handling only %d\n",
__func__, i + n, SYSCALL_MAX_ARGS);
memset(args_bad, 0, n_bad * sizeof(args[0]));
n = SYSCALL_MAX_ARGS - i;
......@@ -88,7 +88,7 @@ static inline void syscall_set_arguments(struct task_struct *task,
return;
if (i + n > SYSCALL_MAX_ARGS) {
pr_warning("%s called with max args %d, handling only %d\n",
pr_warn("%s called with max args %d, handling only %d\n",
__func__, i + n, SYSCALL_MAX_ARGS);
n = SYSCALL_MAX_ARGS - i;
}
......
......@@ -130,7 +130,7 @@ static int __init parse_tag_cmdline(const struct tag *tag)
strlcat(default_command_line, tag->u.cmdline.cmdline,
COMMAND_LINE_SIZE);
#elif defined(CONFIG_CMDLINE_FORCE)
pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");
#else
strlcpy(default_command_line, tag->u.cmdline.cmdline,
COMMAND_LINE_SIZE);
......
......@@ -146,7 +146,7 @@ ENDPROC(__und_invalid)
#define SPFIX(code...)
#endif
.macro svc_entry, stack_hole=0
.macro svc_entry, stack_hole=0, trace=1
UNWIND(.fnstart )
UNWIND(.save {r0 - pc} )
sub sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
......@@ -182,9 +182,11 @@ ENDPROC(__und_invalid)
@
stmia r7, {r2 - r6}
.if \trace
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
.endif
.endm
.align 5
......@@ -294,6 +296,15 @@ __pabt_svc:
UNWIND(.fnend )
ENDPROC(__pabt_svc)
.align 5
__fiq_svc:
svc_entry trace=0
mov r0, sp @ struct pt_regs *regs
bl handle_fiq_as_nmi
svc_exit_via_fiq
UNWIND(.fnend )
ENDPROC(__fiq_svc)
.align 5
.LCcralign:
.word cr_alignment
......@@ -304,6 +315,46 @@ ENDPROC(__pabt_svc)
.LCfp:
.word fp_enter
/*
* Abort mode handlers
*/
@
@ Taking a FIQ in abort mode is similar to taking a FIQ in SVC mode
@ and reuses the same macros. However in abort mode we must also
@ save/restore lr_abt and spsr_abt to make nested aborts safe.
@
.align 5
__fiq_abt:
svc_entry trace=0
ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( msr cpsr_c, r0 )
mov r1, lr @ Save lr_abt
mrs r2, spsr @ Save spsr_abt, abort is now safe
ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( msr cpsr_c, r0 )
stmfd sp!, {r1 - r2}
add r0, sp, #8 @ struct pt_regs *regs
bl handle_fiq_as_nmi
ldmfd sp!, {r1 - r2}
ARM( msr cpsr_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( mov r0, #ABT_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( msr cpsr_c, r0 )
mov lr, r1 @ Restore lr_abt, abort is unsafe
msr spsr_cxsf, r2 @ Restore spsr_abt
ARM( msr cpsr_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( mov r0, #SVC_MODE | PSR_I_BIT | PSR_F_BIT )
THUMB( msr cpsr_c, r0 )
svc_exit_via_fiq
UNWIND(.fnend )
ENDPROC(__fiq_abt)
/*
* User mode handlers
*
......@@ -314,13 +365,16 @@ ENDPROC(__pabt_svc)
#error "sizeof(struct pt_regs) must be a multiple of 8"
#endif
.macro usr_entry
.macro usr_entry, trace=1
UNWIND(.fnstart )
UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
ARM( stmib sp, {r1 - r12} )
THUMB( stmia sp, {r0 - r12} )
ATRAP( mrc p15, 0, r7, c1, c0, 0)
ATRAP( ldr r8, .LCcralign)
ldmia r0, {r3 - r5}
add r0, sp, #S_PC @ here for interlock avoidance
mov r6, #-1 @ "" "" "" ""
......@@ -328,6 +382,8 @@ ENDPROC(__pabt_svc)
str r3, [sp] @ save the "real" r0 copied
@ from the exception stack
ATRAP( ldr r8, [r8, #0])
@
@ We are now ready to fill in the remaining blanks on the stack:
@
......@@ -341,20 +397,21 @@ ENDPROC(__pabt_svc)
ARM( stmdb r0, {sp, lr}^ )
THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
@
@ Enable the alignment trap while in kernel mode
@
alignment_trap r0, .LCcralign
ATRAP( teq r8, r7)
ATRAP( mcrne p15, 0, r8, c1, c0, 0)
@
@ Clear FP to mark the first stack frame
@
zero_fp
.if \trace
#ifdef CONFIG_IRQSOFF_TRACER
bl trace_hardirqs_off
#endif
ct_user_exit save = 0
.endif
.endm
.macro kuser_cmpxchg_check
......@@ -683,6 +740,17 @@ ENTRY(ret_from_exception)
ENDPROC(__pabt_usr)
ENDPROC(ret_from_exception)
.align 5
__fiq_usr:
usr_entry trace=0
kuser_cmpxchg_check
mov r0, sp @ struct pt_regs *regs
bl handle_fiq_as_nmi
get_thread_info tsk
restore_user_regs fast = 0, offset = 0
UNWIND(.fnend )
ENDPROC(__fiq_usr)
/*
* Register switch for ARMv3 and ARMv4 processors
* r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
......@@ -1118,17 +1186,29 @@ vector_addrexcptn:
b vector_addrexcptn
/*=============================================================================
* Undefined FIQs
* FIQ "NMI" handler
*-----------------------------------------------------------------------------
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
* MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
* Basically to switch modes, we *HAVE* to clobber one register... brain
* damage alert! I don't think that we can execute any code in here in any
* other mode than FIQ... Ok you can switch to another mode, but you can't
* get out of that mode without clobbering one register.
* Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
* systems.
*/
vector_fiq:
subs pc, lr, #4
vector_stub fiq, FIQ_MODE, 4
.long __fiq_usr @ 0 (USR_26 / USR_32)
.long __fiq_svc @ 1 (FIQ_26 / FIQ_32)
.long __fiq_svc @ 2 (IRQ_26 / IRQ_32)
.long __fiq_svc @ 3 (SVC_26 / SVC_32)
.long __fiq_svc @ 4
.long __fiq_svc @ 5
.long __fiq_svc @ 6
.long __fiq_abt @ 7
.long __fiq_svc @ 8
.long __fiq_svc @ 9
.long __fiq_svc @ a
.long __fiq_svc @ b
.long __fiq_svc @ c
.long __fiq_svc @ d
.long __fiq_svc @ e
.long __fiq_svc @ f
.globl vector_fiq_offset
.equ vector_fiq_offset, vector_fiq
......
......@@ -366,7 +366,7 @@ ENTRY(vector_swi)
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
#endif
zero_fp
alignment_trap ip, __cr_alignment
alignment_trap r10, ip, __cr_alignment
enable_irq
ct_user_exit
get_thread_info tsk
......
......@@ -37,11 +37,19 @@
#endif
.endm
.macro alignment_trap, rtemp, label
#ifdef CONFIG_ALIGNMENT_TRAP
ldr \rtemp, \label
ldr \rtemp, [\rtemp]
mcr p15, 0, \rtemp, c1, c0
#define ATRAP(x...) x
#else
#define ATRAP(x...)
#endif
.macro alignment_trap, rtmp1, rtmp2, label
#ifdef CONFIG_ALIGNMENT_TRAP
mrc p15, 0, \rtmp2, c1, c0, 0
ldr \rtmp1, \label
ldr \rtmp1, [\rtmp1]
teq \rtmp1, \rtmp2
mcrne p15, 0, \rtmp1, c1, c0, 0
#endif
.endm
......@@ -216,6 +224,34 @@
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.endm
@
@ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit
@
@ This macro acts in a similar manner to svc_exit but switches to FIQ
@ mode to restore the final part of the register state.
@
@ We cannot use the normal svc_exit procedure because that would
@ clobber spsr_svc (FIQ could be delivered during the first few
@ instructions of vector_swi meaning its contents have not been
@ saved anywhere).
@
@ Note that, unlike svc_exit, this macro also does not allow a caller
@ supplied rpsr. This is because the FIQ exceptions are not re-entrant
@ and the handlers cannot call into the scheduler (meaning the value
@ on the stack remains correct).
@
.macro svc_exit_via_fiq
mov r0, sp
ldmib r0, {r1 - r14} @ abort is deadly from here onward (it will
@ clobber state restored below)
msr cpsr_c, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
add r8, r0, #S_PC
ldr r9, [r0, #S_PSR]
msr spsr_cxsf, r9
ldr r0, [r0, #S_R0]
ldmia r8, {pc}^
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
......@@ -267,6 +303,25 @@
rfeia sp!
.endm
@
@ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit
@
@ For full details see non-Thumb implementation above.
@
.macro svc_exit_via_fiq
add r0, sp, #S_R2
ldr lr, [sp, #S_LR]
ldr sp, [sp, #S_SP] @ abort is deadly from here onward (it will
@ clobber state restored below)
ldmia r0, {r2 - r12}
mov r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
msr cpsr_c, r1
sub r0, #S_R2
add r8, r0, #S_PC
ldmia r0, {r0 - r1}
rfeia r8
.endm
#ifdef CONFIG_CPU_V7M
/*
* Note we don't need to do clrex here as clearing the local monitor is
......
......@@ -52,7 +52,8 @@
(unsigned)&vector_fiq_offset; \
})
static unsigned long no_fiq_insn;
static unsigned long dfl_fiq_insn;
static struct pt_regs dfl_fiq_regs;
/* Default reacquire function
* - we always relinquish FIQ control
......@@ -60,8 +61,15 @@ static unsigned long no_fiq_insn;
*/
static int fiq_def_op(void *ref, int relinquish)
{
if (!relinquish)
set_fiq_handler(&no_fiq_insn, sizeof(no_fiq_insn));
if (!relinquish) {
/* Restore default handler and registers */
local_fiq_disable();
set_fiq_regs(&dfl_fiq_regs);
set_fiq_handler(&dfl_fiq_insn, sizeof(dfl_fiq_insn));
local_fiq_enable();
/* FIXME: notify irq controller to standard enable FIQs */
}
return 0;
}
......@@ -150,6 +158,7 @@ EXPORT_SYMBOL(disable_fiq);
void __init init_FIQ(int start)
{
unsigned offset = FIQ_OFFSET;
no_fiq_insn = *(unsigned long *)(0xffff0000 + offset);
dfl_fiq_insn = *(unsigned long *)(0xffff0000 + offset);
get_fiq_regs(&dfl_fiq_regs);
fiq_start = start;
}
......@@ -113,8 +113,8 @@ static u32 read_wb_reg(int n)
GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val);
GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val);
default:
pr_warning("attempt to read from unknown breakpoint "
"register %d\n", n);
pr_warn("attempt to read from unknown breakpoint register %d\n",
n);
}
return val;
......@@ -128,8 +128,8 @@ static void write_wb_reg(int n, u32 val)
GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val);
GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val);
default:
pr_warning("attempt to write to unknown breakpoint "
"register %d\n", n);
pr_warn("attempt to write to unknown breakpoint register %d\n",
n);
}
isb();
}
......@@ -292,7 +292,7 @@ int hw_breakpoint_slots(int type)
case TYPE_DATA:
return get_num_wrps();
default:
pr_warning("unknown slot type: %d\n", type);
pr_warn("unknown slot type: %d\n", type);
return 0;
}
}
......@@ -365,7 +365,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
}
if (i == max_slots) {
pr_warning("Can't find any breakpoint slot\n");
pr_warn("Can't find any breakpoint slot\n");
return -EBUSY;
}
......@@ -417,7 +417,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
}
if (i == max_slots) {
pr_warning("Can't find any breakpoint slot\n");
pr_warn("Can't find any breakpoint slot\n");
return;
}
......@@ -894,7 +894,7 @@ static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
{
int cpu = smp_processor_id();
pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
pr_warn("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
instr, cpu);
/* Set the error flag for this CPU and skip the faulting instruction. */
......
......@@ -205,8 +205,8 @@ void migrate_irqs(void)
raw_spin_unlock(&desc->lock);
if (affinity_broken && printk_ratelimit())
pr_warning("IRQ%u no longer affine to CPU%u\n", i,
smp_processor_id());
pr_warn("IRQ%u no longer affine to CPU%u\n",
i, smp_processor_id());
}
local_irq_restore(flags);
......
......@@ -146,7 +146,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
* continue. Otherwise, continue without this interrupt.
*/
if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
irq, i);
continue;
}
......
......@@ -306,7 +306,6 @@ void __show_regs(struct pt_regs *regs)
void show_regs(struct pt_regs * regs)
{
printk("\n");
__show_regs(regs);
dump_stack();
}
......@@ -474,19 +473,57 @@ int in_gate_area_no_mm(unsigned long addr)
const char *arch_vma_name(struct vm_area_struct *vma)
{
return is_gate_vma(vma) ? "[vectors]" :
(vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ?
"[sigpage]" : NULL;
return is_gate_vma(vma) ? "[vectors]" : NULL;
}
/* If possible, provide a placement hint at a random offset from the
* stack for the signal page.
*/
static unsigned long sigpage_addr(const struct mm_struct *mm,
unsigned int npages)
{
unsigned long offset;
unsigned long first;
unsigned long last;
unsigned long addr;
unsigned int slots;
first = PAGE_ALIGN(mm->start_stack);
last = TASK_SIZE - (npages << PAGE_SHIFT);
/* No room after stack? */
if (first > last)
return 0;
/* Just enough room? */
if (first == last)
return first;
slots = ((last - first) >> PAGE_SHIFT) + 1;
offset = get_random_int() % slots;
addr = first + (offset << PAGE_SHIFT);
return addr;
}
static struct page *signal_page;
extern struct page *get_signal_page(void);
static const struct vm_special_mapping sigpage_mapping = {
.name = "[sigpage]",
.pages = &signal_page,
};
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long addr;
int ret;
unsigned long hint;
int ret = 0;
if (!signal_page)
signal_page = get_signal_page();
......@@ -494,17 +531,22 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
return -ENOMEM;
down_write(&mm->mmap_sem);
addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
hint = sigpage_addr(mm, 1);
addr = get_unmapped_area(NULL, hint, PAGE_SIZE, 0, 0);
if (IS_ERR_VALUE(addr)) {
ret = addr;
goto up_fail;
}
ret = install_special_mapping(mm, addr, PAGE_SIZE,
vma = _install_special_mapping(mm, addr, PAGE_SIZE,
VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
&signal_page);
&sigpage_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto up_fail;
}
if (ret == 0)
mm->context.sigpage = addr;
up_fail:
......
......@@ -59,15 +59,6 @@ void *return_address(unsigned int level)
#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
#if defined(CONFIG_ARM_UNWIND)
#warning "TODO: return_address should use unwind tables"
#endif
void *return_address(unsigned int level)
{
return NULL;
}
#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
EXPORT_SYMBOL_GPL(return_address);
......@@ -133,6 +133,7 @@ struct stack {
u32 irq[3];
u32 abt[3];
u32 und[3];
u32 fiq[3];
} ____cacheline_aligned;
#ifndef CONFIG_CPU_V7M
......@@ -470,7 +471,10 @@ void notrace cpu_init(void)
"msr cpsr_c, %5\n\t"
"add r14, %0, %6\n\t"
"mov sp, r14\n\t"
"msr cpsr_c, %7"
"msr cpsr_c, %7\n\t"
"add r14, %0, %8\n\t"
"mov sp, r14\n\t"
"msr cpsr_c, %9"
:
: "r" (stk),
PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
......@@ -479,6 +483,8 @@ void notrace cpu_init(void)
"I" (offsetof(struct stack, abt[0])),
PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
"I" (offsetof(struct stack, und[0])),
PLC (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
"I" (offsetof(struct stack, fiq[0])),
PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
: "r14");
#endif
......
......@@ -95,6 +95,9 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
if (!smp_ops.smp_boot_secondary)
return -ENOSYS;
/*
* We need to tell the secondary core where to find
* its stack and the page tables.
......@@ -113,7 +116,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
/*
* Now bring the CPU into our world.
*/
ret = boot_secondary(cpu, idle);
ret = smp_ops.smp_boot_secondary(cpu, idle);
if (ret == 0) {
/*
* CPU was successfully started, wait for it
......@@ -142,13 +145,6 @@ void __init smp_init_cpus(void)
smp_ops.smp_init_cpus();
}
int boot_secondary(unsigned int cpu, struct task_struct *idle)
{
if (smp_ops.smp_boot_secondary)
return smp_ops.smp_boot_secondary(cpu, idle);
return -ENOSYS;
}
int platform_can_cpu_hotplug(void)
{
#ifdef CONFIG_HOTPLUG_CPU
......@@ -650,7 +646,7 @@ void smp_send_stop(void)
udelay(1);
if (num_online_cpus() > 1)
pr_warning("SMP: failed to stop secondary CPUs\n");
pr_warn("SMP: failed to stop secondary CPUs\n");
}
/*
......
......@@ -25,6 +25,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/irq.h>
#include <linux/atomic.h>
#include <asm/cacheflush.h>
......@@ -460,10 +461,29 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
}
asmlinkage void do_unexp_fiq (struct pt_regs *regs)
/*
* Handle FIQ similarly to NMI on x86 systems.
*
* The runtime environment for NMIs is extremely restrictive
* (NMIs can pre-empt critical sections meaning almost all locking is
* forbidden) meaning this default FIQ handling must only be used in
* circumstances where non-maskability improves robustness, such as
* watchdog or debug logic.
*
* This handler is not appropriate for general purpose use in drivers
* platform code and can be overrideen using set_fiq_handler.
*/
asmlinkage void __exception_irq_entry handle_fiq_as_nmi(struct pt_regs *regs)
{
printk("Hmm. Unexpected FIQ received, but trying to continue\n");
printk("You may have a hardware problem...\n");
struct pt_regs *old_regs = set_irq_regs(regs);
nmi_enter();
/* nop. FIQ handlers for special arch/arm features can be added here. */
nmi_exit();
set_irq_regs(old_regs);
}
/*
......
......@@ -157,7 +157,7 @@ static const struct unwind_idx *search_index(unsigned long addr,
if (likely(start->addr_offset <= addr_prel31))
return start;
else {
pr_warning("unwind: Unknown symbol address %08lx\n", addr);
pr_warn("unwind: Unknown symbol address %08lx\n", addr);
return NULL;
}
}
......@@ -225,7 +225,7 @@ static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
unsigned long ret;
if (ctrl->entries <= 0) {
pr_warning("unwind: Corrupt unwind table\n");
pr_warn("unwind: Corrupt unwind table\n");
return 0;
}
......@@ -333,7 +333,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
insn = (insn << 8) | unwind_get_byte(ctrl);
mask = insn & 0x0fff;
if (mask == 0) {
pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
pr_warn("unwind: 'Refuse to unwind' instruction %04lx\n",
insn);
return -URC_FAILURE;
}
......@@ -357,7 +357,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
unsigned long mask = unwind_get_byte(ctrl);
if (mask == 0 || mask & 0xf0) {
pr_warning("unwind: Spare encoding %04lx\n",
pr_warn("unwind: Spare encoding %04lx\n",
(insn << 8) | mask);
return -URC_FAILURE;
}
......@@ -370,7 +370,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
} else {
pr_warning("unwind: Unhandled instruction %02lx\n", insn);
pr_warn("unwind: Unhandled instruction %02lx\n", insn);
return -URC_FAILURE;
}
......@@ -403,7 +403,7 @@ int unwind_frame(struct stackframe *frame)
idx = unwind_find_idx(frame->pc);
if (!idx) {
pr_warning("unwind: Index not found %08lx\n", frame->pc);
pr_warn("unwind: Index not found %08lx\n", frame->pc);
return -URC_FAILURE;
}
......@@ -422,7 +422,7 @@ int unwind_frame(struct stackframe *frame)
/* only personality routine 0 supported in the index */
ctrl.insn = &idx->insn;
else {
pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
pr_warn("unwind: Unsupported personality routine %08lx in the index at %p\n",
idx->insn, idx);
return -URC_FAILURE;
}
......@@ -435,7 +435,7 @@ int unwind_frame(struct stackframe *frame)
ctrl.byte = 1;
ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
} else {
pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
pr_warn("unwind: Unsupported personality routine %08lx at %p\n",
*ctrl.insn, ctrl.insn);
return -URC_FAILURE;
}
......
......@@ -219,8 +219,8 @@ SECTIONS
__data_loc = ALIGN(4); /* location in binary */
. = PAGE_OFFSET + TEXT_OFFSET;
#else
__init_end = .;
. = ALIGN(THREAD_SIZE);
__init_end = .;
__data_loc = .;
#endif
......
......@@ -58,6 +58,7 @@ config SA1100_H3100
bool "Compaq iPAQ H3100"
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
......@@ -69,6 +70,7 @@ config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select ARM_SA1110_CPUFREQ
select HTC_EGPIO
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
......
......@@ -25,6 +25,7 @@
#include <asm/mach/map.h>
#include <mach/h3xxx.h>
#include <mach/irqs.h>
#include "generic.h"
......@@ -244,9 +245,23 @@ static struct platform_device h3xxx_keys = {
},
};
static struct resource h3xxx_micro_resources[] = {
DEFINE_RES_MEM(0x80010000, SZ_4K),
DEFINE_RES_MEM(0x80020000, SZ_4K),
DEFINE_RES_IRQ(IRQ_Ser1UART),
};
struct platform_device h3xxx_micro_asic = {
.name = "ipaq-h3xxx-micro",
.id = -1,
.resource = h3xxx_micro_resources,
.num_resources = ARRAY_SIZE(h3xxx_micro_resources),
};
static struct platform_device *h3xxx_devices[] = {
&h3xxx_egpio,
&h3xxx_keys,
&h3xxx_micro_asic,
};
void __init h3xxx_mach_init(void)
......
......@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/log2.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
......@@ -945,6 +946,98 @@ static int l2_wt_override;
* pass it though the device tree */
static u32 cache_id_part_number_from_dt;
/**
* l2x0_cache_size_of_parse() - read cache size parameters from DT
* @np: the device tree node for the l2 cache
* @aux_val: pointer to machine-supplied auxilary register value, to
* be augmented by the call (bits to be set to 1)
* @aux_mask: pointer to machine-supplied auxilary register mask, to
* be augmented by the call (bits to be set to 0)
* @associativity: variable to return the calculated associativity in
* @max_way_size: the maximum size in bytes for the cache ways
*/
static void __init l2x0_cache_size_of_parse(const struct device_node *np,
u32 *aux_val, u32 *aux_mask,
u32 *associativity,
u32 max_way_size)
{
u32 mask = 0, val = 0;
u32 cache_size = 0, sets = 0;
u32 way_size_bits = 1;
u32 way_size = 0;
u32 block_size = 0;
u32 line_size = 0;
of_property_read_u32(np, "cache-size", &cache_size);
of_property_read_u32(np, "cache-sets", &sets);
of_property_read_u32(np, "cache-block-size", &block_size);
of_property_read_u32(np, "cache-line-size", &line_size);
if (!cache_size || !sets)
return;
/* All these l2 caches have the same line = block size actually */
if (!line_size) {
if (block_size) {
/* If linesize if not given, it is equal to blocksize */
line_size = block_size;
} else {
/* Fall back to known size */
pr_warn("L2C OF: no cache block/line size given: "
"falling back to default size %d bytes\n",
CACHE_LINE_SIZE);
line_size = CACHE_LINE_SIZE;
}
}
if (line_size != CACHE_LINE_SIZE)
pr_warn("L2C OF: DT supplied line size %d bytes does "
"not match hardware line size of %d bytes\n",
line_size,
CACHE_LINE_SIZE);
/*
* Since:
* set size = cache size / sets
* ways = cache size / (sets * line size)
* way size = cache size / (cache size / (sets * line size))
* way size = sets * line size
* associativity = ways = cache size / way size
*/
way_size = sets * line_size;
*associativity = cache_size / way_size;
if (way_size > max_way_size) {
pr_err("L2C OF: set size %dKB is too large\n", way_size);
return;
}
pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
cache_size, cache_size >> 10);
pr_info("L2C OF: override line size: %d bytes\n", line_size);
pr_info("L2C OF: override way size: %d bytes (%dKB)\n",
way_size, way_size >> 10);
pr_info("L2C OF: override associativity: %d\n", *associativity);
/*
* Calculates the bits 17:19 to set for way size:
* 512KB -> 6, 256KB -> 5, ... 16KB -> 1
*/
way_size_bits = ilog2(way_size >> 10) - 3;
if (way_size_bits < 1 || way_size_bits > 6) {
pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
way_size);
return;
}
mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
val |= (way_size_bits << L2C_AUX_CTRL_WAY_SIZE_SHIFT);
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
}
static void __init l2x0_of_parse(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
......@@ -952,6 +1045,7 @@ static void __init l2x0_of_parse(const struct device_node *np,
u32 tag = 0;
u32 dirty = 0;
u32 val = 0, mask = 0;
u32 assoc;
of_property_read_u32(np, "arm,tag-latency", &tag);
if (tag) {
......@@ -974,6 +1068,15 @@ static void __init l2x0_of_parse(const struct device_node *np,
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
}
l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
if (assoc > 8) {
pr_err("l2x0 of: cache setting yield too high associativity\n");
pr_err("l2x0 of: %d calculated, max 8\n", assoc);
} else {
mask |= L2X0_AUX_CTRL_ASSOC_MASK;
val |= (assoc << L2X0_AUX_CTRL_ASSOC_SHIFT);
}
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
......@@ -1021,6 +1124,7 @@ static void __init l2c310_of_parse(const struct device_node *np,
u32 data[3] = { 0, 0, 0 };
u32 tag[3] = { 0, 0, 0 };
u32 filter[2] = { 0, 0 };
u32 assoc;
of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
if (tag[0] && tag[1] && tag[2])
......@@ -1047,6 +1151,23 @@ static void __init l2c310_of_parse(const struct device_node *np,
writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L310_ADDR_FILTER_EN,
l2x0_base + L310_ADDR_FILTER_START);
}
l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
switch (assoc) {
case 16:
*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
*aux_val |= L310_AUX_CTRL_ASSOCIATIVITY_16;
*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
break;
case 8:
*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
break;
default:
pr_err("PL310 OF: cache setting yield illegal associativity\n");
pr_err("PL310 OF: %d calculated, only 8 and 16 legal\n", assoc);
break;
}
}
static const struct l2c_init_data of_l2c310_data __initconst = {
......
......@@ -27,7 +27,7 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
pmd = pmd_alloc_one(&init_mm, addr);
if (!pmd) {
pr_warning("Failed to allocate identity pmd.\n");
pr_warn("Failed to allocate identity pmd.\n");
return;
}
/*
......
......@@ -636,6 +636,11 @@ static int keep_initrd;
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (!keep_initrd) {
if (start == initrd_start)
start = round_down(start, PAGE_SIZE);
if (end == initrd_end)
end = round_up(end, PAGE_SIZE);
poison_init_mem((void *)start, PAGE_ALIGN(end) - start);
free_reserved_area((void *)start, (void *)end, -1, "initrd");
}
......
......@@ -223,13 +223,13 @@ early_param("ecc", early_ecc);
static int __init early_cachepolicy(char *p)
{
pr_warning("cachepolicy kernel parameter not supported without cp15\n");
pr_warn("cachepolicy kernel parameter not supported without cp15\n");
}
early_param("cachepolicy", early_cachepolicy);
static int __init noalign_setup(char *__unused)
{
pr_warning("noalign kernel parameter not supported without cp15\n");
pr_warn("noalign kernel parameter not supported without cp15\n");
}
__setup("noalign", noalign_setup);
......
......@@ -570,7 +570,7 @@ __v7_ca15mp_proc_info:
__v7_b15mp_proc_info:
.long 0x420f00f0
.long 0xff0ffff0
__v7_proc __v7_b15mp_setup, hwcaps = HWCAP_IDIV
__v7_proc __v7_b15mp_setup
.size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info
/*
......
......@@ -97,9 +97,9 @@ SECTIONS
PERCPU_SECTION(64)
. = ALIGN(PAGE_SIZE);
__init_end = .;
. = ALIGN(PAGE_SIZE);
_data = .;
_sdata = .;
RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
......
......@@ -333,8 +333,14 @@ static int keep_initrd;
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (!keep_initrd)
if (!keep_initrd) {
if (start == initrd_start)
start = round_down(start, PAGE_SIZE);
if (end == initrd_end)
end = round_up(end, PAGE_SIZE);
free_reserved_area((void *)start, (void *)end, 0, "initrd");
}
}
static int __init keepinitrd_setup(char *__unused)
......
......@@ -543,7 +543,7 @@ config CRYPTO_SHA1_ARM
config CRYPTO_SHA1_ARM_NEON
tristate "SHA1 digest algorithm (ARM NEON)"
depends on ARM && KERNEL_MODE_NEON && !CPU_BIG_ENDIAN
depends on ARM && KERNEL_MODE_NEON
select CRYPTO_SHA1_ARM
select CRYPTO_SHA1
select CRYPTO_HASH
......@@ -603,7 +603,7 @@ config CRYPTO_SHA512_SPARC64
config CRYPTO_SHA512_ARM_NEON
tristate "SHA384 and SHA512 digest algorithm (ARM NEON)"
depends on ARM && KERNEL_MODE_NEON && !CPU_BIG_ENDIAN
depends on ARM && KERNEL_MODE_NEON
select CRYPTO_SHA512
select CRYPTO_HASH
help
......
......@@ -40,6 +40,8 @@
* }
*
* [__init_begin, __init_end] is the init section that may be freed after init
* // __init_begin and __init_end should be page aligned, so that we can
* // free the whole .init memory
* [_stext, _etext] is the text section
* [_sdata, _edata] is the data section
*
......
......@@ -35,7 +35,7 @@ config GCOV_KERNEL
config GCOV_PROFILE_ALL
bool "Profile entire Kernel"
depends on GCOV_KERNEL
depends on SUPERH || S390 || X86 || PPC || MICROBLAZE
depends on SUPERH || S390 || X86 || PPC || MICROBLAZE || ARM
default n
---help---
This options activates profiling for the entire kernel.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment