[PATCH] mpt fusion update from vendor

drivers/message/fusion/Config.help

@@ -42,6 +42,16 @@ CONFIG_FUSION
   architecture is based on LSI Logic's Message Passing Interface (MPI)
   specification.
 
+Maximum number of scatter gather entries
+CONFIG_FUSION_MAX_SGE
+  This option allows you to specify the maximum number of scatter-
+  gather entries per I/O. The driver defaults to 40, a reasonable number
+  for most systems. However, the user may increase this up to 128.
+  Increasing this parameter will require significantly more memory 
+  on a per controller instance. Increasing the parameter is not
+  necessary (or recommended) unless the user will be running 
+  large I/O's via the raw interface.
+
 CONFIG_FUSION_ISENSE
   The isense module (roughly stands for Interpret SENSE data) is
   completely optional.  It simply provides extra English readable

drivers/message/fusion/Config.in

@@ -10,6 +10,7 @@ if [ "$CONFIG_FUSION" = "y" -o "$CONFIG_FUSION" = "m" ]; then
   else
     define_bool CONFIG_FUSION_BOOT n
   fi
+  int  "  Maximum number of scatter gather entries" CONFIG_FUSION_MAX_SGE 40 
 
   if [ "$CONFIG_MODULES" = "y" ]; then
     #  How can we force these options to module or nothing?

drivers/message/fusion/linux_compat.h

@@ -253,25 +253,36 @@ static __inline__ int __get_order(unsigned long size)
 #endif
 
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28)
-#define mptscsih_save_flags(flags) \
-({	local_irq_save(flags); \
-})
+#define mptscsih_lock(iocp, flags) \
+                spin_lock_irqsave(&iocp->FreeQlock, flags)
 #else
-#define mptscsih_save_flags(flags) \
+#define mptscsih_lock(iocp, flags) \
 ({	save_flags(flags); \
 	cli(); \
 })
 #endif
 
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28)
-#define mptscsih_restore_flags(flags) \
-({	local_irq_enable(); \
-	local_irq_restore(flags); \
-})
+#define mptscsih_unlock(iocp, flags) \
+                spin_unlock_irqrestore(&iocp->FreeQlock, flags)
+#else
+#define mptscsih_unlock(iocp, flags)  restore_flags(flags);
+#endif
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,41)
+#define mpt_work_struct work_struct 
+#define MPT_INIT_WORK(_task, _func, _data) INIT_WORK(_task, _func, _data)
 #else
-#define mptscsih_restore_flags(flags)  restore_flags(flags);
+#define mpt_work_struct tq_struct 
+#define MPT_INIT_WORK(_task, _func, _data) \
+({	(_task)->sync = 0; \
+	(_task)->routine = (_func); \
+	(_task)->data = (void *) (_data); \
+})
 #endif
 
+
 /*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif /* _LINUX_COMPAT_H */
 

drivers/message/fusion/lsi/mpi.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    MPI.H Version:  01.02.06
+ *    MPI.H Version:  01.02.07
  *
  *  Version History
  *  ---------------
@@ -47,6 +47,7 @@
  *  03-14-02  01.02.04  Added MPI_HEADER_VERSION_ defines.
  *  05-31-02  01.02.05  Bumped MPI_HEADER_VERSION_UNIT.
  *  07-12-02  01.02.06  Added define for MPI_FUNCTION_MAILBOX.
+ *  09-16-02  01.02.07  Bumped value for MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -75,7 +76,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x07)
+#define MPI_HEADER_VERSION_UNIT             (0x09)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)

drivers/message/fusion/lsi/mpi_cnfg.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    MPI_CNFG.H Version:  01.02.08
+ *    MPI_CNFG.H Version:  01.02.09
  *
  *  Version History
  *  ---------------
@@ -127,6 +127,7 @@
  *                      MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
  *                      Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
  *                      Modified MPI_FCPORTPAGE5_FLAGS_ defines.
+ *  09-16-02 01.02.09   Added more MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
  *  --------------------------------------------------------------------------
  */
 
@@ -814,6 +815,7 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_1
 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED           (0x00000002)
 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED           (0x00000004)
 #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE    (0x00000008)
+#define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG             (0x00000010)
 
 
 typedef struct _CONFIG_PAGE_SCSI_DEVICE_2

drivers/message/fusion/lsi/mpi_targ.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Target mode messages and structures
  *  Creation Date:  June 22, 2000
  *
- *    MPI_TARG.H Version:  01.02.06
+ *    MPI_TARG.H Version:  01.02.07
  *
  *  Version History
  *  ---------------
@@ -39,6 +39,8 @@
  *  05-31-02  01.02.06  Modified TARGET_MODE_REPLY_ALIAS_MASK to only include
  *                      one bit.
  *                      Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
+ *  09-16-02  01.02.07  Added flags for confirmed completion.
+ *                      Added PRIORITY_REASON_TARGET_BUSY.
  *  --------------------------------------------------------------------------
  */
 
@@ -138,6 +140,7 @@ typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY
 #define PRIORITY_REASON_PROTOCOL_ERR            (0x06)
 #define PRIORITY_REASON_DATA_OUT_PARITY_ERR     (0x07)
 #define PRIORITY_REASON_DATA_OUT_CRC_ERR        (0x08)
+#define PRIORITY_REASON_TARGET_BUSY             (0x09)
 #define PRIORITY_REASON_UNKNOWN                 (0xFF)
 
 
@@ -217,6 +220,7 @@ typedef struct _MSG_TARGET_ASSIST_REQUEST
 #define TARGET_ASSIST_FLAGS_DATA_DIRECTION          (0x01)
 #define TARGET_ASSIST_FLAGS_AUTO_STATUS             (0x02)
 #define TARGET_ASSIST_FLAGS_HIGH_PRIORITY           (0x04)
+#define TARGET_ASSIST_FLAGS_CONFIRMED               (0x08)
 #define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER       (0x80)
 
 
@@ -261,6 +265,7 @@ typedef struct _MSG_TARGET_STATUS_SEND_REQUEST
 
 #define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS   (0x01)
 #define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY      (0x04)
+#define TARGET_STATUS_SEND_FLAGS_CONFIRMED          (0x08)
 #define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER  (0x80)
 
 /*

drivers/message/fusion/mptbase.c

@@ -49,7 +49,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptbase.c,v 1.121 2002/07/23 18:56:59 pdelaney Exp $
+ *  $Id: mptbase.c,v 1.122 2002/10/03 13:10:11 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -1416,10 +1416,30 @@ mpt_adapter_install(struct pci_dev *pdev)
 	else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929X) {
 		ioc->chip_type = FC929X;
 		ioc->prod_name = "LSIFC929X";
+		{
+			/* 929X Chip Fix. Set Split transactions level
+			 * for PCIX. Set bits 5 - 6 to zero, turn on bit 4.
+			 */
+			u16 pcixcmd = 0;
+			pci_read_config_word(pdev, 0x6a, &pcixcmd);
+			pcixcmd &= 0xFF9F;
+			pcixcmd |= 0x0010;
+			pci_write_config_word(pdev, 0x6a, pcixcmd);
+		}
 	}
 	else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC919X) {
 		ioc->chip_type = FC919X;
 		ioc->prod_name = "LSIFC919X";
+		{
+			/* 919X Chip Fix. Set Split transactions level
+			 * for PCIX. Set bits 5 - 6 to zero, turn on bit 4.
+			 */
+			u16 pcixcmd = 0;
+			pci_read_config_word(pdev, 0x6a, &pcixcmd);
+			pcixcmd &= 0xFF9F;
+			pcixcmd |= 0x0010;
+			pci_write_config_word(pdev, 0x6a, pcixcmd);
+		}
 	}
 	else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) {
 		ioc->chip_type = C1030;

drivers/message/fusion/mptbase.h

@@ -13,7 +13,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptbase.h,v 1.133 2002/09/05 22:30:09 pdelaney Exp $
+ *  $Id: mptbase.h,v 1.134 2002/10/03 13:10:12 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -80,8 +80,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2002 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"2.02.01.01"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-2.02.01.01"
+#define MPT_LINUX_VERSION_COMMON	"2.02.01.07"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-2.02.01.07"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -91,7 +91,7 @@
 /*
  *  Fusion MPT(linux) driver configurable stuff...
  */
-#define MPT_MAX_ADAPTERS		16
+#define MPT_MAX_ADAPTERS		18
 #define MPT_MAX_PROTOCOL_DRIVERS	16
 #define MPT_MAX_BUS			1
 #define MPT_MAX_FC_DEVICES		255
@@ -397,8 +397,10 @@ typedef struct _VirtDevice {
 	ScsiCmndTracker		 SentQ;
 	ScsiCmndTracker		 DoneQ;
 //--- LUN split here?
+#ifdef MPT_SAVE_AUTOSENSE
 	u8			 sense[SCSI_STD_SENSE_BYTES];		/* 18 */
 	u8			 rsvd2[2];	/* alignment */
+#endif
 	u32			 luns;		/* Max LUNs is 32 */
 	u8			 inq_data[SCSI_STD_INQUIRY_BYTES];	/* 36 */
 	u8			 pad0[4];
@@ -424,7 +426,9 @@ typedef struct _VirtDevice {
 #define MPT_TARGET_DEFAULT_DV_STATUS	0
 #define MPT_TARGET_FLAGS_VALID_NEGO	0x01
 #define MPT_TARGET_FLAGS_VALID_INQUIRY	0x02
+#ifdef MPT_SAVE_AUTOSENSE
 #define MPT_TARGET_FLAGS_VALID_SENSE	0x04
+#endif
 #define MPT_TARGET_FLAGS_Q_YES		0x08
 #define MPT_TARGET_FLAGS_VALID_56	0x10
 
@@ -890,6 +894,8 @@ typedef struct _MPT_SCSI_HOST {
 	MPT_Q_TRACKER		  taskQ;		/* TM request Q */
 	spinlock_t		  freedoneQlock;
 	int			  taskQcnt;
+	int			  num_chain;		/* Number of chain buffers */
+	int			  max_sge;		/* Max No of SGE*/
 	u8			  numTMrequests;
 	u8			  tmPending;
 	u8			  resetPending;

drivers/message/fusion/mptctl.c

@@ -34,7 +34,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptctl.c,v 1.59 2002/09/05 22:30:10 pdelaney Exp $
+ *  $Id: mptctl.c,v 1.60 2002/10/03 13:10:13 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -627,7 +627,7 @@ mptctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned
 	/* Test for Compaq-specific IOCTL's.
 	 */
 	if ((cmd == CPQFCTS_GETPCIINFO) || (cmd == CPQFCTS_CTLR_STATUS) ||
-		(cmd == CPQFCTS_GETDRIVER) || (cmd == CPQFCTS_SCSI_PASSTHRU) ||
+		(cmd == CPQFCTS_GETDRIVVER) || (cmd == CPQFCTS_SCSI_PASSTHRU) ||
 		(cmd == CPQFCTS_SCSI_IOCTL_FC_TARGET_ADDRESS))
 		return mptctl_compaq_ioctl(file, cmd, arg);
 
@@ -2406,7 +2406,7 @@ mptctl_compaq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case CPQFCTS_GETPCIINFO:
 		ret = mptctl_cpq_getpciinfo(arg);
 		break;
-	case CPQFCTS_GETDRIVER:
+	case CPQFCTS_GETDRIVVER:
 		ret = mptctl_cpq_getdriver(arg);
 		break;
 	case CPQFCTS_CTLR_STATUS:
@@ -3180,7 +3180,7 @@ int __init mptctl_init(void)
 	if (++where && err) goto out_fail;
 	err = register_ioctl32_conversion(CPQFCTS_CTLR_STATUS, NULL);
 	if (++where && err) goto out_fail;
-	err = register_ioctl32_conversion(CPQFCTS_GETDRIVER, NULL);
+	err = register_ioctl32_conversion(CPQFCTS_GETDRIVVER, NULL);
 	if (++where && err) goto out_fail;
 	err = register_ioctl32_conversion(CPQFCTS_SCSI_IOCTL_FC_TARGET_ADDRESS, NULL);
 	if (++where && err) goto out_fail;
@@ -3234,7 +3234,7 @@ int __init mptctl_init(void)
 	unregister_ioctl32_conversion(MPTCOMMAND32);
 	unregister_ioctl32_conversion(MPTFWDOWNLOAD32);
 	unregister_ioctl32_conversion(CPQFCTS_GETPCIINFO);
-	unregister_ioctl32_conversion(CPQFCTS_GETDRIVER);
+	unregister_ioctl32_conversion(CPQFCTS_GETDRIVVER);
 	unregister_ioctl32_conversion(CPQFCTS_CTLR_STATUS);
 	unregister_ioctl32_conversion(CPQFCTS_SCSI_IOCTL_FC_TARGET_ADDRESS);
 	unregister_ioctl32_conversion(CPQFCTS_SCSI_PASSTHRU32);

drivers/message/fusion/mptctl.h

@@ -20,7 +20,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptctl.h,v 1.10 2002/05/28 15:57:16 pdelaney Exp $
+ *  $Id: mptctl.h,v 1.11 2002/10/03 13:10:13 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -319,12 +319,12 @@ struct mpt_ioctl_command32 {
 #define CPQFCTS_IOC_MAGIC 'Z'
 
 #define CPQFCTS_GETPCIINFO		_IOR(CPQFCTS_IOC_MAGIC, 1, cpqfc_pci_info_struct)
-#define CPQFCTS_GETDRIVER		_IOR(CPQFCTS_IOC_MAGIC, 2, int)
+#define CPQFCTS_GETDRIVVER		_IOR(CPQFCTS_IOC_MAGIC, 9, int)
 #define CPQFCTS_CTLR_STATUS		_IOR(CPQFCTS_IOC_MAGIC, 3, struct _cpqfc_ctlr_status)
-#define CPQFCTS_SCSI_IOCTL_FC_TARGET_ADDRESS	_IOR(CPQFCTS_IOC_MAGIC, 4, struct scsi_fctargaddress)
-#define CPQFCTS_SCSI_PASSTHRU		_IOWR(CPQFCTS_IOC_MAGIC, 5, VENDOR_IOCTL_REQ)
+#define CPQFCTS_SCSI_IOCTL_FC_TARGET_ADDRESS	_IOR(CPQFCTS_IOC_MAGIC, 13, struct scsi_fctargaddress)
+#define CPQFCTS_SCSI_PASSTHRU		_IOWR(CPQFCTS_IOC_MAGIC, 11, VENDOR_IOCTL_REQ)
 #if defined(__sparc__) && defined(__sparc_v9__)
-#define CPQFCTS_SCSI_PASSTHRU32		_IOWR(CPQFCTS_IOC_MAGIC, 5, VENDOR_IOCTL_REQ32)
+#define CPQFCTS_SCSI_PASSTHRU32		_IOWR(CPQFCTS_IOC_MAGIC, 11, VENDOR_IOCTL_REQ32)
 #endif
 
 typedef struct {

drivers/message/fusion/mptlan.c

@@ -132,7 +132,7 @@ struct mpt_lan_priv {
 	u32 total_received;
 	struct net_device_stats stats;	/* Per device statistics */
 
-	struct work_struct post_buckets_task;
+	struct mpt_work_struct post_buckets_task;
 	unsigned long post_buckets_active;
 };
 
@@ -876,9 +876,22 @@ mpt_lan_wake_post_buckets_task(struct net_device *dev, int priority)
 	
 	if (test_and_set_bit(0, &priv->post_buckets_active) == 0) {
 		if (priority) {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,41)
 			schedule_work(&priv->post_buckets_task);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,40)
+			schedule_task(&priv->post_buckets_task);
+#else
+			queue_task(&priv->post_buckets_task, &tq_immediate);
+			mark_bh(IMMEDIATE_BH);
+#endif
 		} else {
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,41)
 			schedule_delayed_work(&priv->post_buckets_task, 1);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,40)
+			schedule_task(&priv->post_buckets_task);
+#else
+			queue_task(&priv->post_buckets_task, &tq_timer);
+#endif
 			dioprintk((KERN_INFO MYNAM ": post_buckets queued on "
 				   "timer.\n"));
 		}
@@ -1364,8 +1377,8 @@ mpt_register_lan_device (MPT_ADAPTER *mpt_dev, int pnum)
 	priv->mpt_dev = mpt_dev;
 	priv->pnum = pnum;
 
-	memset(&priv->post_buckets_task, 0, sizeof(struct work_struct));
-	INIT_WORK(&priv->post_buckets_task, mpt_lan_post_receive_buckets, dev);
+	memset(&priv->post_buckets_task, 0, sizeof(struct mpt_work_struct));
+	MPT_INIT_WORK(&priv->post_buckets_task, mpt_lan_post_receive_buckets, dev);
 	priv->post_buckets_active = 0;
 
 	dlprintk((KERN_INFO MYNAM "@%d: bucketlen = %d\n",

drivers/message/fusion/mptlan.h

@@ -20,7 +20,11 @@
 #include <linux/slab.h>
 #include <linux/miscdevice.h>
 #include <linux/spinlock.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,41)
+#include <linux/tqueue.h>
+#else
 #include <linux/workqueue.h>
+#endif
 #include <linux/delay.h>
 // #include <linux/trdevice.h>
 

drivers/message/fusion/mptscsih.c

@@ -26,7 +26,7 @@
  *  (mailto:sjralston1@netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptscsih.c,v 1.101 2002/09/05 22:30:11 pdelaney Exp $
+ *  $Id: mptscsih.c,v 1.102 2002/10/03 13:10:14 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -76,7 +76,6 @@
 #include <linux/delay.h>	/* for mdelay */
 #include <linux/interrupt.h>	/* needed for in_interrupt() proto */
 #include <linux/reboot.h>	/* notifier code */
-#include <linux/workqueue.h>
 #include "../../scsi/scsi.h"
 #include "../../scsi/hosts.h"
 #include "../../scsi/sd.h"
@@ -165,7 +164,6 @@ static int	mptscsih_AddSGE(MPT_SCSI_HOST *hd, Scsi_Cmnd *SCpnt,
 static int	mptscsih_getFreeChainBuffer(MPT_SCSI_HOST *hd, int *retIndex);
 static void	mptscsih_freeChainBuffers(MPT_SCSI_HOST *hd, int req_idx);
 static int	mptscsih_initChainBuffers (MPT_SCSI_HOST *hd, int init);
-
 static void	copy_sense_data(Scsi_Cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
 #ifndef MPT_SCSI_USE_NEW_EH
 static void	search_taskQ_for_cmd(Scsi_Cmnd *sc, MPT_SCSI_HOST *hd);
@@ -184,7 +182,9 @@ static int	mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE
 
 static VirtDevice	*mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen);
 void		mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56);
+#ifdef MPT_SAVE_AUTOSENSE
 static void	clear_sense_flag(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
+#endif
 static void	mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
 static void	mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags);
 static void	mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id);
@@ -245,7 +245,7 @@ static struct proc_dir_entry proc_mpt_scsihost =
  */
 static spinlock_t mytaskQ_lock = SPIN_LOCK_UNLOCKED;
 static int mytaskQ_bh_active = 0;
-static struct work_struct	mptscsih_ptaskfoo;
+static struct mpt_work_struct	mptscsih_ptaskfoo;
 static atomic_t	mpt_taskQdepth;
 #endif
 
@@ -256,7 +256,7 @@ static atomic_t	mpt_taskQdepth;
 static spinlock_t dvtaskQ_lock = SPIN_LOCK_UNLOCKED;
 static int dvtaskQ_active = 0;
 static int dvtaskQ_release = 0;
-static struct work_struct	mptscsih_dvTask;
+static struct mpt_work_struct	mptscsih_dvTask;
 #endif
 
 /*
@@ -352,7 +352,9 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 						dlen);
 			}
 		}
+#ifdef MPT_SAVE_AUTOSENSE
 		clear_sense_flag(hd, pScsiReq);
+#endif
 	} else {
 		u32	 xfer_cnt;
 		u16	 status;
@@ -437,17 +439,21 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 			 *  precedence!
 			 */
 			sc->result = (DID_OK << 16) | pScsiReply->SCSIStatus;
+#ifdef MPT_SAVE_AUTOSENSE
 			clear_sense_flag(hd, pScsiReq);
-			if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+#endif
+			if (scsi_state == 0) {
+				;
+			} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
 				/* Have already saved the status and sense data
 				 */
 				;
-			} else if (pScsiReply->SCSIState & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
+			} else if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
 				/* What to do?
 				 */
 				sc->result = DID_SOFT_ERROR << 16;
 			}
-			else if (pScsiReply->SCSIState & MPI_SCSI_STATE_TERMINATED) {
+			else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
 				/*  Not real sure here either...  */
 				sc->result = DID_RESET << 16;
 			}
@@ -488,9 +494,12 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
 		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
 			sc->result = (DID_OK << 16) | pScsiReply->SCSIStatus;
+#ifdef MPT_SAVE_AUTOSENSE
 			clear_sense_flag(hd, pScsiReq);
-
-			if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+#endif
+			if (scsi_state == 0) {
+				;
+			} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
 				/*
 				 * If running agains circa 200003dd 909 MPT f/w,
 				 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
@@ -521,7 +530,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 #endif
 
 			}
-			else if (pScsiReply->SCSIState &
+			else if (scsi_state &
 			         (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
 			   ) {
 				/*
@@ -529,11 +538,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 				 */
 				sc->result = DID_SOFT_ERROR << 16;
 			}
-			else if (pScsiReply->SCSIState & MPI_SCSI_STATE_TERMINATED) {
+			else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
 				/*  Not real sure here either...  */
 				sc->result = DID_RESET << 16;
 			}
-			else if (pScsiReply->SCSIState & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
+			else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
 				/* Device Inq. data indicates that it supports
 				 * QTags, but rejects QTag messages.
 				 * This command completed OK.
@@ -1024,21 +1033,13 @@ mptscsih_initChainBuffers (MPT_SCSI_HOST *hd, int init)
 	MPT_FRAME_HDR	*chain;
 	u8		*mem;
 	unsigned long	flags;
-	int		sz, ii, numChain;
+	int		sz, ii, num_chain;
+	int 		scale, num_sge;
 
-
-        /* Chain buffer allocations
-	 * Allocate and initialize tracker structures
+	/* ReqToChain size must equal the req_depth
+	 * index = req_idx
 	 */
-	if (hd->ioc->req_sz <= 64)
-		numChain = MPT_SG_REQ_64_SCALE * hd->ioc->req_depth;
-	else if (hd->ioc->req_sz <= 96)
-		numChain = MPT_SG_REQ_96_SCALE * hd->ioc->req_depth;
-	else
-		numChain = MPT_SG_REQ_128_SCALE * hd->ioc->req_depth;
-
-	sz = numChain * sizeof(int);
-
+	sz = hd->ioc->req_depth * sizeof(int);
 	if (hd->ReqToChain == NULL) {
 		mem = kmalloc(sz, GFP_ATOMIC);
 		if (mem == NULL)
@@ -1050,6 +1051,38 @@ mptscsih_initChainBuffers (MPT_SCSI_HOST *hd, int init)
 	}
 	memset(mem, 0xFF, sz);
 
+
+	/* ChainToChain size must equal the total number
+	 * of chain buffers to be allocated.
+	 * index = chain_idx
+	 *
+	 * Calculate the number of chain buffers needed(plus 1) per I/O 
+	 * then multiply the the maximum number of simultaneous cmds
+	 *
+	 * num_sge = num sge in request frame + last chain buffer
+	 * scale = num sge per chain buffer if no chain element
+	 */
+	scale = hd->ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
+	if (sizeof(dma_addr_t) == sizeof(u64))
+		num_sge =  scale + (hd->ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+	else
+		num_sge =  1+ scale + (hd->ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+
+	num_chain = 1;
+	while (hd->max_sge - num_sge > 0) {
+		num_chain++;
+		num_sge += (scale - 1);
+	}
+	num_chain++;
+
+	if ((int) hd->ioc->chip_type > (int) FC929)
+		num_chain *= MPT_SCSI_CAN_QUEUE;
+	else
+		num_chain *= MPT_FC_CAN_QUEUE;
+
+	hd->num_chain = num_chain;
+
+	sz = num_chain * sizeof(int);
 	if (hd->ChainToChain == NULL) {
 		mem = kmalloc(sz, GFP_ATOMIC);
 		if (mem == NULL)
@@ -1061,10 +1094,10 @@ mptscsih_initChainBuffers (MPT_SCSI_HOST *hd, int init)
 	}
 	memset(mem, 0xFF, sz);
 
+	sz = num_chain * hd->ioc->req_sz;
 	if (hd->ChainBuffer == NULL) {
 		/* Allocate free chain buffer pool
 		 */
-		sz = numChain * hd->ioc->req_sz;
 		mem = pci_alloc_consistent(hd->ioc->pcidev, sz, &hd->ChainBufferDMA);
 		if (mem == NULL)
 			return -1;
@@ -1090,7 +1123,7 @@ mptscsih_initChainBuffers (MPT_SCSI_HOST *hd, int init)
 	/* Post the chain buffers to the FreeChainQ.
 	 */
 	mem = (u8 *)hd->ChainBuffer;
-	for (ii=0; ii < numChain; ii++) {
+	for (ii=0; ii < num_chain; ii++) {
 		chain = (MPT_FRAME_HDR *) mem;
 		Q_ADD_TAIL(&hd->FreeChainQ.head, &chain->u.frame.linkage, MPT_FRAME_HDR);
 		mem += hd->ioc->req_sz;
@@ -1227,7 +1260,7 @@ mptscsih_detect(Scsi_Host_Template *tpnt)
 #endif
 			sh = scsi_register(tpnt, sizeof(MPT_SCSI_HOST));
 			if (sh != NULL) {
-				mptscsih_save_flags(flags);
+				mptscsih_lock(this, flags);
 				sh->io_port = 0;
 				sh->n_io_port = 0;
 				sh->irq = 0;
@@ -1254,12 +1287,21 @@ mptscsih_detect(Scsi_Host_Template *tpnt)
 				}
 				sh->max_lun = MPT_LAST_LUN + 1;
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,7)
+				sh->max_sectors = MPT_SCSI_MAX_SECTORS;
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,1)
+				sh->highmem_io = 1;
+#endif
 				sh->this_id = this->pfacts[portnum].PortSCSIID;
 
 				/* OS entry to allow host drivers to force
 				 * a queue depth on a per device basis.
 				 */
 				sh->select_queue_depths = mptscsih_select_queue_depths;
+				/* Required entry.
+				 */
+				sh->unique_id = this->id;
 
 				/* Verify that we won't exceed the maximum
 				 * number of chain buffers
@@ -1291,10 +1333,11 @@ mptscsih_detect(Scsi_Host_Template *tpnt)
 				 */
 				scsi_set_pci_device(sh, this->pcidev);
 
-				mptscsih_restore_flags(flags);
+				mptscsih_unlock(this, flags);
 
 				hd = (MPT_SCSI_HOST *) sh->hostdata;
 				hd->ioc = this;
+				hd->max_sge = sh->sg_tablesize;
 
 				if ((int)this->chip_type > (int)FC929)
 					hd->is_spi = 1;
@@ -1534,7 +1577,6 @@ mptscsih_release(struct Scsi_Host *host)
 		int szc2chain = 0;
 		int szchain = 0;
 		int szQ = 0;
-		int scale;
 
 		/* Synchronize disk caches
 		 */
@@ -1542,13 +1584,6 @@ mptscsih_release(struct Scsi_Host *host)
 
 		sz1 = sz2 = sz3 = 0;
 
-		if (hd->ioc->req_sz <= 64)
-			scale = MPT_SG_REQ_64_SCALE;
-		else if (hd->ioc->req_sz <= 96)
-			scale = MPT_SG_REQ_96_SCALE;
-		else
-			scale = MPT_SG_REQ_128_SCALE;
-
 		if (hd->ScsiLookup != NULL) {
 			sz1 = hd->ioc->req_depth * sizeof(void *);
 			kfree(hd->ScsiLookup);
@@ -1556,19 +1591,19 @@ mptscsih_release(struct Scsi_Host *host)
 		}
 
 		if (hd->ReqToChain != NULL) {
-			szr2chain = scale * hd->ioc->req_depth * sizeof(int);
+			szr2chain = hd->ioc->req_depth * sizeof(int);
 			kfree(hd->ReqToChain);
 			hd->ReqToChain = NULL;
 		}
 
 		if (hd->ChainToChain != NULL) {
-			szc2chain = scale * hd->ioc->req_depth * sizeof(int);
+			szc2chain = hd->num_chain * sizeof(int);
 			kfree(hd->ChainToChain);
 			hd->ChainToChain = NULL;
 		}
 
 		if (hd->ChainBuffer != NULL) {
-			sz2 = scale * hd->ioc->req_depth * hd->ioc->req_sz;
+			sz2 = hd->num_chain * hd->ioc->req_sz;
 			szchain = szr2chain + szc2chain + sz2;
 
 			pci_free_consistent(hd->ioc->pcidev, sz2,
@@ -1591,7 +1626,7 @@ mptscsih_release(struct Scsi_Host *host)
 			if (hd->is_spi) {
 				max = MPT_MAX_SCSI_DEVICES;
 			} else {
-				max = MPT_MAX_FC_DEVICES;
+				max = MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255;
 			}
 			for (ii=0; ii < max; ii++) {
 				if (hd->Targets[ii]) {
@@ -1805,6 +1840,7 @@ mptscsih_qcmd(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n",
 			(hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done));
 
+#ifdef MPT_SAVE_AUTOSENSE
 	/* 20000617 -sralston
 	 *  GRRRRR...  Shouldn't have to do this but...
 	 *  Do explicit check for REQUEST_SENSE and cached SenseData.
@@ -1840,6 +1876,7 @@ mptscsih_qcmd(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 			}
 		}
 	}
+#endif
 
 	if (hd->resetPending) {
 		/* Prevent new commands from being issued
@@ -2020,7 +2057,8 @@ mptscsih_qcmd(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 					if (!dvtaskQ_active) {
 						dvtaskQ_active = 1;
 						spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
-						INIT_WORK(&mptscsih_dvTask, mptscsih_domainValidation, (void *) hd);
+						MPT_INIT_WORK(&mptscsih_dvTask, mptscsih_domainValidation, (void *) hd); 
+
 						SCHEDULE_TASK(&mptscsih_dvTask);
 					} else {
 						spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
@@ -3046,7 +3084,7 @@ mptscsih_old_abort(Scsi_Cmnd *SCpnt)
 {
 	MPT_SCSI_HOST		*hd;
 	MPT_FRAME_HDR		*mf;
-	struct work_struct	*ptaskfoo;
+	struct mpt_work_struct	*ptaskfoo;
 	unsigned long		 flags;
 	int			 scpnt_idx;
 
@@ -3154,10 +3192,8 @@ mptscsih_old_abort(Scsi_Cmnd *SCpnt)
 		 *  Oh how cute, no alloc/free/mgmt needed if we use
 		 *  (bottom/unused portion of) MPT request frame.
 		 */
-		ptaskfoo = (struct work_struct *) &mptscsih_ptaskfoo;
-		ptaskfoo->sync = 0;
-		ptaskfoo->routine = mptscsih_taskmgmt_bh;
-		ptaskfoo->data = SCpnt;
+		ptaskfoo = (struct mpt_work_struct *) &mptscsih_ptaskfoo;
+		MPT_INIT_WORK(&mptscsih_ptaskfoo, mptscsih_taskmgmt_bh, (void *) SCpnt); 
 
 		SCHEDULE_TASK(ptaskfoo);
 	} else  {
@@ -3182,7 +3218,7 @@ mptscsih_old_reset(Scsi_Cmnd *SCpnt, unsigned int reset_flags)
 {
 	MPT_SCSI_HOST		*hd;
 	MPT_FRAME_HDR		*mf;
-	struct work_struct	*ptaskfoo;
+	struct mpt_work_struct	*ptaskfoo;
 	unsigned long		 flags;
 	int			 scpnt_idx;
 
@@ -3284,10 +3320,8 @@ mptscsih_old_reset(Scsi_Cmnd *SCpnt, unsigned int reset_flags)
 		 *  Oh how cute, no alloc/free/mgmt needed if we use
 		 *  (bottom/unused portion of) MPT request frame.
 		 */
-		ptaskfoo = (struct work_struct *) &mptscsih_ptaskfoo;
-		ptaskfoo->sync = 0;
-		ptaskfoo->routine = mptscsih_taskmgmt_bh;
-		ptaskfoo->data = SCpnt;
+		ptaskfoo = (struct mpt_work_struct *) &mptscsih_ptaskfoo;
+		MPT_INIT_WORK(&mptscsih_ptaskfoo, mptscsih_taskmgmt_bh, (void *) SCpnt); 
 
 		SCHEDULE_TASK(ptaskfoo);
 	} else  {
@@ -3655,7 +3689,7 @@ mptscsih_select_queue_depths(struct Scsi_Host *sh, Scsi_Device *sdList)
 			if (hd->is_spi)
 				max = MPT_MAX_SCSI_DEVICES;
 			else
-				max = MPT_MAX_FC_DEVICES;
+				max = MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255;
 
 			for (ii=0; ii < max; ii++) {
 				pTarget = hd->Targets[ii];
@@ -3801,6 +3835,7 @@ copy_sense_data(Scsi_Cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply
 		/* save sense data to the target device
 		 */
 		if (target) {
+#ifdef MPT_SAVE_AUTOSENSE
 			int sz;
 
 			sz = MIN(pReq->SenseBufferLength, sense_count);
@@ -3808,6 +3843,7 @@ copy_sense_data(Scsi_Cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply
 				sz =  SCSI_STD_SENSE_BYTES;
 			memcpy(target->sense, sense_data, sz);
 			target->tflags |= MPT_TARGET_FLAGS_VALID_SENSE;
+#endif
 
 #ifdef ABORT_FIX
 			if (sz >= SCSI_STD_SENSE_BYTES) {
@@ -4491,6 +4527,7 @@ static int dump_cdb(char *foo, unsigned char *cdb)
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#if 0
 static int dump_sd(char *foo, unsigned char *sd)
 {
 	int snsLen = 8 + SD_Additional_Sense_Length(sd);
@@ -4503,6 +4540,7 @@ static int dump_sd(char *foo, unsigned char *sd)
 
 	return l;
 }
+#endif
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*  Do ASC/ASCQ lookup/grindage to English readable string(s)  */
@@ -4593,6 +4631,15 @@ static const char * ascq_set_strings_4max(
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ *  SCSI Information Report; desired output format...
+ *---
+SCSI Error: (iocnum:target_id:LUN) Status=02h (CHECK CONDITION)
+  Key=6h (UNIT ATTENTION); FRU=03h
+  ASC/ASCQ=29h/00h, "POWER ON, RESET, OR BUS DEVICE RESET OCCURRED"
+  CDB: 00 00 00 00 00 00 - TestUnitReady
+ *---
+ */
 /*
  *  SCSI Error Report; desired output format...
  *---
@@ -4617,6 +4664,22 @@ int mpt_ScsiHost_ErrorReport(IO_Info_t *ioop)
 	unsigned char	 ascq		= SD_ASCQ(ioop->sensePtr);
 	int		 l;
 
+	/* Change the error logging to only report errors on
+	 * read and write commands. Ignore errors on other commands.
+	 * Should this be configurable via proc?
+	 */
+	switch (ioop->cdbPtr[0]) {
+	case READ_6:
+	case WRITE_6:
+	case READ_10:
+	case WRITE_10:
+	case READ_12:
+	case WRITE_12:
+		break;
+	default:
+		return 0;
+	}
+
 	/*
 	 *  More quiet mode.
 	 *  Filter out common, repetitive, warning-type errors...  like:
@@ -4627,6 +4690,7 @@ int mpt_ScsiHost_ErrorReport(IO_Info_t *ioop)
 	if (sk == SK_NO_SENSE) {
 		return 0;
 	}
+
 	if (	(sk==SK_UNIT_ATTENTION	&& asc==0x29 && (ascq==0x00 || ascq==0x01))
 	     || (sk==SK_NOT_READY	&& asc==0x04 && (ascq==0x01 || ascq==0x02))
 	     || (sk==SK_ILLEGAL_REQUEST && asc==0x25 && ascq==0x00)
@@ -4681,20 +4745,12 @@ int mpt_ScsiHost_ErrorReport(IO_Info_t *ioop)
 	else if (mpt_ScsiOpcodesPtr)
 		opstr = mpt_ScsiOpcodesPtr[ioop->cdbPtr[0]];
 
-	l = sprintf(foo, "SCSI Error Report =-=-= (%s)\n"
-	  "  SCSI_Status=%02Xh (%s)\n"
-	  "  Original_CDB[]:",
-			ioop->DevIDStr,
-			ioop->SCSIStatus,
-			statstr);
-	l += dump_cdb(foo+l, ioop->cdbPtr);
-	if (opstr)
-		l += sprintf(foo+l, " - \"%s\"", opstr);
-	l += sprintf(foo+l, "\n  SenseData[%02Xh]:", 8+SD_Additional_Sense_Length(ioop->sensePtr));
-	l += dump_sd(foo+l, ioop->sensePtr);
-	l += sprintf(foo+l, "\n  SenseKey=%Xh (%s); FRU=%02Xh\n  ASC/ASCQ=%02Xh/%02Xh",
-			sk, skstr, SD_FRU(ioop->sensePtr), asc, ascq );
-
+	l = sprintf(foo, "SCSI Error: (%s) Status=%02Xh (%s)\n",
+			  ioop->DevIDStr,
+			  ioop->SCSIStatus,
+			  statstr);
+	l += sprintf(foo+l, " Key=%Xh (%s); FRU=%02Xh\n ASC/ASCQ=%02Xh/%02Xh",
+		  sk, skstr, SD_FRU(ioop->sensePtr), asc, ascq );
 	{
 		const char	*x1, *x2, *x3, *x4;
 		x1 = x2 = x3 = x4 = "";
@@ -4706,11 +4762,11 @@ int mpt_ScsiHost_ErrorReport(IO_Info_t *ioop)
 				l += sprintf(foo+l, " %s%s%s%s", x1,x2,x3,x4);
 		}
 	}
-
-#if 0
-	if (SPECIAL_ASCQ(asc,ascq))
-		l += sprintf(foo+l, " (%02Xh)", ascq);
-#endif
+	l += sprintf(foo+l, "\n CDB:");
+	l += dump_cdb(foo+l, ioop->cdbPtr);
+	if (opstr)
+		l += sprintf(foo+l, " - \"%s\"", opstr);
+	l += sprintf(foo+l, "\n");
 
 	PrintF(("%s\n", foo));
 
@@ -4953,6 +5009,7 @@ void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byt
 	return;
 }
 
+#ifdef MPT_SAVE_AUTOSENSE
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *  Clear sense valid flag.
@@ -4968,6 +5025,7 @@ static void clear_sense_flag(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
 
 	return;
 }
+#endif
 
 /* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
  * Else set the NEED_DV flag after Read Capacity Issued (disks) 
@@ -5366,7 +5424,9 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 
 	/* If target struct exists, clear sense valid flag.
 	 */
+#ifdef MPT_SAVE_AUTOSENSE
 	clear_sense_flag(hd, pReq);
+#endif
 
 	if (mr == NULL) {
 		completionCode = MPT_SCANDV_GOOD;
@@ -5418,7 +5478,9 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 					completionCode = MPT_SCANDV_SOME_ERROR;
 
 			} else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+#ifdef MPT_SAVE_AUTOSENSE
 				VirtDevice	*target;
+#endif
 				u8		*sense_data;
 				int		 sz;
 
@@ -5433,12 +5495,14 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 							SCSI_STD_SENSE_BYTES);
 				memcpy(hd->pLocal->sense, sense_data, sz);
 
+#ifdef MPT_SAVE_AUTOSENSE
 				target = hd->Targets[pReq->TargetID];
 				if (target) {
 					memcpy(target->sense, sense_data, sz);
 					target->tflags
 						|= MPT_TARGET_FLAGS_VALID_SENSE;
 				}
+#endif
 
 				ddvprintk((KERN_NOTICE "  Check Condition, sense ptr %p\n",
 						sense_data));

drivers/message/fusion/mptscsih.h

@@ -20,7 +20,7 @@
  *  (mailto:netscape.net)
  *  (mailto:Pam.Delaney@lsil.com)
  *
- *  $Id: mptscsih.h,v 1.18 2002/06/06 15:32:52 pdelaney Exp $
+ *  $Id: mptscsih.h,v 1.19 2002/10/03 13:10:15 pdelaney Exp $
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -77,7 +77,22 @@
 #define MPT_SCSI_CAN_QUEUE	MPT_FC_CAN_QUEUE
 #define MPT_SCSI_CMD_PER_LUN	 7
 
+#define MPT_SCSI_MAX_SECTORS    8192
+
+/*
+ * Set the MAX_SGE value based on user input.
+ */
+#ifdef  CONFIG_FUSION_MAX_SGE
+#if     CONFIG_FUSION_MAX_SGE  < 16
+#define MPT_SCSI_SG_DEPTH	16
+#elif   CONFIG_FUSION_MAX_SGE  > 128
+#define MPT_SCSI_SG_DEPTH	128
+#else
+#define MPT_SCSI_SG_DEPTH	CONFIG_FUSION_MAX_SGE
+#endif
+#else
 #define MPT_SCSI_SG_DEPTH	40
+#endif
 
 /* To disable domain validation, uncomment the
  * following line. No effect for FC devices.
@@ -146,25 +161,39 @@ struct mptscsih_driver_setup
 /*
  *	tq_scheduler disappeared @ lk-2.4.0-test12
  *	(right when <linux/sched.h> newly defined TQ_ACTIVE)
+ *	tq_struct reworked in 2.5.41. Include workqueue.h.
  */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,41)
+#	include <linux/sched.h>
+#	include <linux/workqueue.h>
+#define SCHEDULE_TASK(x)		\
+	if (schedule_work(x) == 0) {	\
+		/*MOD_DEC_USE_COUNT*/;	\
+	}
+#else
 #define HAVE_TQ_SCHED	1
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
 #	include <linux/sched.h>
 #	ifdef TQ_ACTIVE
 #		undef HAVE_TQ_SCHED
 #	endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,40)
+#		undef HAVE_TQ_SCHED
+#endif
 #endif
 #ifdef HAVE_TQ_SCHED
 #define SCHEDULE_TASK(x)		\
 	/*MOD_INC_USE_COUNT*/;		\
-	schedule_work(x)
+	(x)->next = NULL;		\
+	queue_task(x, &tq_scheduler)
 #else
 #define SCHEDULE_TASK(x)		\
 	/*MOD_INC_USE_COUNT*/;		\
-	if (schedule_work(x) == 0) {	\
+	if (schedule_task(x) == 0) {	\
 		/*MOD_DEC_USE_COUNT*/;	\
 	}
 #endif
+#endif
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
@@ -236,6 +265,7 @@ extern	void		 x_scsi_taskmgmt_bh(void *);
 	can_queue:			MPT_SCSI_CAN_QUEUE,	\
 	this_id:			-1,			\
 	sg_tablesize:			MPT_SCSI_SG_DEPTH,	\
+	max_sectors:			MPT_SCSI_MAX_SECTORS,   \
 	cmd_per_lun:			MPT_SCSI_CMD_PER_LUN,	\
 	unchecked_isa_dma:		0,			\
 	use_clustering:			ENABLE_CLUSTERING,	\