[SCSI] ufs: add operation for the uic power mode change

Setting PA_PWRMode using DME_SET triggers the power mode
change. And then the result will be given by the HCS.UPMCRS.
This operation should be done atomically.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Tested-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Santosh Y <santoshsy@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/ufs/ufshcd.c

@@ -36,9 +36,11 @@
 #include <linux/async.h>
 
 #include "ufshcd.h"
+#include "unipro.h"
 
 #define UFSHCD_ENABLE_INTRS	(UTP_TRANSFER_REQ_COMPL |\
 				 UTP_TASK_REQ_COMPL |\
+				 UIC_POWER_MODE |\
 				 UFSHCD_ERROR_MASK)
 /* UIC command timeout, unit: ms */
 #define UIC_CMD_TIMEOUT	500
@@ -469,6 +471,18 @@ static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba)
 		return false;
 }
 
+/**
+ * ufshcd_get_upmcrs - Get the power mode change request status
+ * @hba: Pointer to adapter instance
+ *
+ * This function gets the UPMCRS field of HCS register
+ * Returns value of UPMCRS field
+ */
+static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
+{
+	return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7;
+}
+
 /**
  * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
  * @hba: per adapter instance
@@ -1459,6 +1473,64 @@ int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
 }
 EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr);
 
+/**
+ * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage
+ *				using DME_SET primitives.
+ * @hba: per adapter instance
+ * @mode: powr mode value
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode)
+{
+	struct uic_command uic_cmd = {0};
+	struct completion pwr_done;
+	unsigned long flags;
+	u8 status;
+	int ret;
+
+	uic_cmd.command = UIC_CMD_DME_SET;
+	uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE);
+	uic_cmd.argument3 = mode;
+	init_completion(&pwr_done);
+
+	mutex_lock(&hba->uic_cmd_mutex);
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	hba->pwr_done = &pwr_done;
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	ret = __ufshcd_send_uic_cmd(hba, &uic_cmd);
+	if (ret) {
+		dev_err(hba->dev,
+			"pwr mode change with mode 0x%x uic error %d\n",
+			mode, ret);
+		goto out;
+	}
+
+	if (!wait_for_completion_timeout(hba->pwr_done,
+					 msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
+		dev_err(hba->dev,
+			"pwr mode change with mode 0x%x completion timeout\n",
+			mode);
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	status = ufshcd_get_upmcrs(hba);
+	if (status != PWR_LOCAL) {
+		dev_err(hba->dev,
+			"pwr mode change failed, host umpcrs:0x%x\n",
+			status);
+		ret = (status != PWR_OK) ? status : -1;
+	}
+out:
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	hba->pwr_done = NULL;
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	mutex_unlock(&hba->uic_cmd_mutex);
+	return ret;
+}
+
 /**
  * ufshcd_complete_dev_init() - checks device readiness
  * hba: per-adapter instance
@@ -1988,16 +2060,20 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 /**
  * ufshcd_uic_cmd_compl - handle completion of uic command
  * @hba: per adapter instance
+ * @intr_status: interrupt status generated by the controller
  */
-static void ufshcd_uic_cmd_compl(struct ufs_hba *hba)
+static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
 {
-	if (hba->active_uic_cmd) {
+	if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) {
 		hba->active_uic_cmd->argument2 |=
 			ufshcd_get_uic_cmd_result(hba);
 		hba->active_uic_cmd->argument3 =
 			ufshcd_get_dme_attr_val(hba);
 		complete(&hba->active_uic_cmd->done);
 	}
+
+	if ((intr_status & UIC_POWER_MODE) && hba->pwr_done)
+		complete(hba->pwr_done);
 }
 
 /**
@@ -2343,8 +2419,8 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
 	if (hba->errors)
 		ufshcd_err_handler(hba);
 
-	if (intr_status & UIC_COMMAND_COMPL)
-		ufshcd_uic_cmd_compl(hba);
+	if (intr_status & UFSHCD_UIC_MASK)
+		ufshcd_uic_cmd_compl(hba, intr_status);
 
 	if (intr_status & UTP_TASK_REQ_COMPL)
 		ufshcd_tmc_handler(hba);

drivers/scsi/ufs/ufshcd.h

@@ -175,6 +175,7 @@ struct ufs_dev_cmd {
  * @active_uic_cmd: handle of active UIC command
  * @uic_cmd_mutex: mutex for uic command
  * @ufshcd_tm_wait_queue: wait queue for task management
+ * @pwr_done: completion for power mode change
  * @tm_condition: condition variable for task management
  * @ufshcd_state: UFSHCD states
  * @intr_mask: Interrupt Mask Bits
@@ -219,6 +220,8 @@ struct ufs_hba {
 	wait_queue_head_t ufshcd_tm_wait_queue;
 	unsigned long tm_condition;
 
+	struct completion *pwr_done;
+
 	u32 ufshcd_state;
 	u32 intr_mask;
 	u16 ee_ctrl_mask;

drivers/scsi/ufs/ufshci.h

@@ -124,6 +124,9 @@ enum {
 #define CONTROLLER_FATAL_ERROR			UFS_BIT(16)
 #define SYSTEM_BUS_FATAL_ERROR			UFS_BIT(17)
 
+#define UFSHCD_UIC_MASK		(UIC_COMMAND_COMPL |\
+				 UIC_POWER_MODE)
+
 #define UFSHCD_ERROR_MASK	(UIC_ERROR |\
 				DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
@@ -142,6 +145,15 @@ enum {
 #define DEVICE_ERROR_INDICATOR			UFS_BIT(5)
 #define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK	UFS_MASK(0x7, 8)
 
+enum {
+	PWR_OK		= 0x0,
+	PWR_LOCAL	= 0x01,
+	PWR_REMOTE	= 0x02,
+	PWR_BUSY	= 0x03,
+	PWR_ERROR_CAP	= 0x04,
+	PWR_FATAL_ERROR	= 0x05,
+};
+
 /* HCE - Host Controller Enable 34h */
 #define CONTROLLER_ENABLE	UFS_BIT(0)
 #define CONTROLLER_DISABLE	0x0

drivers/scsi/ufs/unipro.h

+/*
+ * drivers/scsi/ufs/unipro.h
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * PHY Adpater attributes
+ */
+#define PA_ACTIVETXDATALANES	0x1560
+#define PA_ACTIVERXDATALANES	0x1580
+#define PA_TXTRAILINGCLOCKS	0x1564
+#define PA_PHY_TYPE		0x1500
+#define PA_AVAILTXDATALANES	0x1520
+#define PA_AVAILRXDATALANES	0x1540
+#define PA_MINRXTRAILINGCLOCKS	0x1543
+#define PA_TXPWRSTATUS		0x1567
+#define PA_RXPWRSTATUS		0x1582
+#define PA_TXFORCECLOCK		0x1562
+#define PA_TXPWRMODE		0x1563
+#define PA_LEGACYDPHYESCDL	0x1570
+#define PA_MAXTXSPEEDFAST	0x1521
+#define PA_MAXTXSPEEDSLOW	0x1522
+#define PA_MAXRXSPEEDFAST	0x1541
+#define PA_MAXRXSPEEDSLOW	0x1542
+#define PA_TXLINKSTARTUPHS	0x1544
+#define PA_TXSPEEDFAST		0x1565
+#define PA_TXSPEEDSLOW		0x1566
+#define PA_REMOTEVERINFO	0x15A0
+#define PA_TXGEAR		0x1568
+#define PA_TXTERMINATION	0x1569
+#define PA_HSSERIES		0x156A
+#define PA_PWRMODE		0x1571
+#define PA_RXGEAR		0x1583
+#define PA_RXTERMINATION	0x1584
+#define PA_MAXRXPWMGEAR		0x1586
+#define PA_MAXRXHSGEAR		0x1587
+#define PA_RXHSUNTERMCAP	0x15A5
+#define PA_RXLSTERMCAP		0x15A6
+#define PA_PACPREQTIMEOUT	0x1590
+#define PA_PACPREQEOBTIMEOUT	0x1591
+#define PA_HIBERN8TIME		0x15A7
+#define PA_LOCALVERINFO		0x15A9
+#define PA_TACTIVATE		0x15A8
+#define PA_PACPFRAMECOUNT	0x15C0
+#define PA_PACPERRORCOUNT	0x15C1
+#define PA_PHYTESTCONTROL	0x15C2
+#define PA_PWRMODEUSERDATA0	0x15B0
+#define PA_PWRMODEUSERDATA1	0x15B1
+#define PA_PWRMODEUSERDATA2	0x15B2
+#define PA_PWRMODEUSERDATA3	0x15B3
+#define PA_PWRMODEUSERDATA4	0x15B4
+#define PA_PWRMODEUSERDATA5	0x15B5
+#define PA_PWRMODEUSERDATA6	0x15B6
+#define PA_PWRMODEUSERDATA7	0x15B7
+#define PA_PWRMODEUSERDATA8	0x15B8
+#define PA_PWRMODEUSERDATA9	0x15B9
+#define PA_PWRMODEUSERDATA10	0x15BA
+#define PA_PWRMODEUSERDATA11	0x15BB
+#define PA_CONNECTEDTXDATALANES	0x1561
+#define PA_CONNECTEDRXDATALANES	0x1581
+#define PA_LOGICALLANEMAP	0x15A1
+#define PA_SLEEPNOCONFIGTIME	0x15A2
+#define PA_STALLNOCONFIGTIME	0x15A3
+#define PA_SAVECONFIGTIME	0x15A4
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TC0TXFCTHRESHOLD	0x2040
+#define DL_FC0PROTTIMEOUTVAL	0x2041
+#define DL_TC0REPLAYTIMEOUTVAL	0x2042
+#define DL_AFC0REQTIMEOUTVAL	0x2043
+#define DL_AFC0CREDITTHRESHOLD	0x2044
+#define DL_TC0OUTACKTHRESHOLD	0x2045
+#define DL_TC1TXFCTHRESHOLD	0x2060
+#define DL_FC1PROTTIMEOUTVAL	0x2061
+#define DL_TC1REPLAYTIMEOUTVAL	0x2062
+#define DL_AFC1REQTIMEOUTVAL	0x2063
+#define DL_AFC1CREDITTHRESHOLD	0x2064
+#define DL_TC1OUTACKTHRESHOLD	0x2065
+#define DL_TXPREEMPTIONCAP	0x2000
+#define DL_TC0TXMAXSDUSIZE	0x2001
+#define DL_TC0RXINITCREDITVAL	0x2002
+#define DL_TC0TXBUFFERSIZE	0x2005
+#define DL_PEERTC0PRESENT	0x2046
+#define DL_PEERTC0RXINITCREVAL	0x2047
+#define DL_TC1TXMAXSDUSIZE	0x2003
+#define DL_TC1RXINITCREDITVAL	0x2004
+#define DL_TC1TXBUFFERSIZE	0x2006
+#define DL_PEERTC1PRESENT	0x2066
+#define DL_PEERTC1RXINITCREVAL	0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID		0x3000
+#define N_DEVICEID_VALID	0x3001
+#define N_TC0TXMAXSDUSIZE	0x3020
+#define N_TC1TXMAXSDUSIZE	0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS		0x4000
+#define T_NUMTESTFEATURES	0x4001
+#define T_CONNECTIONSTATE	0x4020
+#define T_PEERDEVICEID		0x4021
+#define T_PEERCPORTID		0x4022
+#define T_TRAFFICCLASS		0x4023
+#define T_PROTOCOLID		0x4024
+#define T_CPORTFLAGS		0x4025
+#define T_TXTOKENVALUE		0x4026
+#define T_RXTOKENVALUE		0x4027
+#define T_LOCALBUFFERSPACE	0x4028
+#define T_PEERBUFFERSPACE	0x4029
+#define T_CREDITSTOSEND		0x402A
+#define T_CPORTMODE		0x402B
+#define T_TC0TXMAXSDUSIZE	0x4060
+#define T_TC1TXMAXSDUSIZE	0x4061
+
+#endif /* _UNIPRO_H_ */