mmc: omap: Remove cpu_is_omap usage from the driver

This is needed for the ARM common zImage support.

We can use the existing slot features to pass omap1
specific options to the driver. For omap2 we don't
want to pass anything new as that will be eventually
moved to use device tree based init.

Note that this patch depends on earlier patch that
moves plat/mmc.h into include/linux/platform_data.

Cc: linux-mmc@vger.kernel.org
Cc: Venkatraman S <svenkatr@ti.com>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/devices.c

@@ -175,6 +175,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	res[3].name = "tx";
 	res[3].flags = IORESOURCE_DMA;
 
+	if (cpu_is_omap7xx())
+		data->slots[0].features = MMC_OMAP7XX;
+	if (cpu_is_omap15xx())
+		data->slots[0].features = MMC_OMAP15XX;
+	if (cpu_is_omap16xx())
+		data->slots[0].features = MMC_OMAP16XX;
+
 	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
 	if (ret == 0)
 		ret = platform_device_add_data(pdev, data, sizeof(*data));

drivers/mmc/host/omap.c

@@ -30,7 +30,6 @@
 #include <linux/slab.h>
 #include <linux/platform_data/mmc-omap.h>
 
-#include <plat/cpu.h>
 #include <plat/dma.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
@@ -73,6 +72,13 @@
 #define	OMAP_MMC_STAT_CARD_BUSY		(1 <<  2)
 #define	OMAP_MMC_STAT_END_OF_CMD	(1 <<  0)
 
+#define mmc_omap7xx()	(host->features & MMC_OMAP7XX)
+#define mmc_omap15xx()	(host->features & MMC_OMAP15XX)
+#define mmc_omap16xx()	(host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK	(MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1()	(host->features & MMC_OMAP1_MASK)
+#define mmc_omap2()	(!mmc_omap1())
+
 #define OMAP_MMC_REG(host, reg)		(OMAP_MMC_REG_##reg << (host)->reg_shift)
 #define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
 #define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
@@ -148,6 +154,7 @@ struct mmc_omap_host {
 	u32			buffer_bytes_left;
 	u32			total_bytes_left;
 
+	unsigned		features;
 	unsigned		use_dma:1;
 	unsigned		brs_received:1, dma_done:1;
 	unsigned		dma_in_use:1;
@@ -989,7 +996,7 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
 		 * blocksize is at least that large. Blocksize is
 		 * usually 512 bytes; but not for some SD reads.
 		 */
-		burst = cpu_is_omap15xx() ? 32 : 64;
+		burst = mmc_omap15xx() ? 32 : 64;
 		if (burst > data->blksz)
 			burst = data->blksz;
 
@@ -1105,8 +1112,7 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
 	if (slot->pdata->set_power != NULL)
 		slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
 					vdd);
-
-	if (cpu_is_omap24xx()) {
+	if (mmc_omap2()) {
 		u16 w;
 
 		if (power_on) {
@@ -1240,7 +1246,7 @@ static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	mmc->ops = &mmc_omap_ops;
 	mmc->f_min = 400000;
 
-	if (cpu_class_is_omap2())
+	if (mmc_omap2())
 		mmc->f_max = 48000000;
 	else
 		mmc->f_max = 24000000;
@@ -1360,6 +1366,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	init_waitqueue_head(&host->slot_wq);
 
 	host->pdata = pdata;
+	host->features = host->pdata->slots[0].features;
 	host->dev = &pdev->dev;
 	platform_set_drvdata(pdev, host);
 
@@ -1392,7 +1399,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	host->dma_tx_burst = -1;
 	host->dma_rx_burst = -1;
 
-	if (cpu_is_omap24xx())
+	if (mmc_omap2())
 		sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
 	else
 		sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
@@ -1408,7 +1415,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 		dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
 			sig);
 #endif
-	if (cpu_is_omap24xx())
+	if (mmc_omap2())
 		sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
 	else
 		sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
@@ -1436,7 +1443,7 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	}
 
 	host->nr_slots = pdata->nr_slots;
-	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+	host->reg_shift = (mmc_omap7xx() ? 1 : 2);
 
 	host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
 	if (!host->mmc_omap_wq)

include/linux/platform_data/mmc-omap.h

@@ -107,6 +107,9 @@ struct omap_mmc_platform_data {
 		/* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS		(1 << 0)
 #define HSMMC_HAS_UPDATED_RESET	(1 << 1)
+#define MMC_OMAP7XX		(1 << 2)
+#define MMC_OMAP15XX		(1 << 3)
+#define MMC_OMAP16XX		(1 << 4)
 		unsigned features;
 
 		int switch_pin;			/* gpio (card detect) */